Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.4 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹29.5 L+₹22,377 (0.76%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹30.9 L+₹1.7 L (5.79%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid | |
| 4 | L4₹31.1 L+₹1.8 L (6.26%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest bid | |
| 5 | L5₹32.3 L+₹3.1 L (10.5%)Rejected-AOC | L5 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹59,000
Closing Date
30 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPECIAL REPAIR TO CERTAIN BUILDINGS AT 56 RR AND ZANGLI AND PROVN OF STORE ROOM AT ZANGLI
2023_MES_592153_1
GE 874/EWS-08/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 874 EWS C/O 56 APO
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹59,000
Yes
21 Jul 2023
28 Apr 2023
31 May 2023
28 Apr 2023
30 May 2023
11 May 2023
28 Apr 2023 - 4 May 2023
Amount
BR and EM Portion
Demolition of Cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness.
Dismantling of timber scantlings 40 sq cm and over in section in any position in framed work,carefuly .
Dismantling of boarding, any description, fixed in any position with nails.
Dismantling brick work or stone masonry built in cement mortar.
Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering.
M&L for second class soft wood as in scantling clean sawn fixed in position.
Refixing for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and as directed (retrived from dismantling).
Refixing Second class soft-wood Clean sawn Timber framed and fixed in scantlings (retrieved from dismantling) in repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) all as specified.
Refixing of 2nd class Soft wood weather boarding clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps.(retrived from dismantling).
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.
M&L Reinforced cement concrete 1:2:4 using 20mm graded stone aggrigate in as Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc including demoloition of RCC any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L Reinforced cement concrete 1:2:4 using 20mm graded stone aggrigate in Beams, cantilevers, bressummers, lintels over 1.5m span etc.; basement slabs, under-reamed piles and mass concrete etc including demoloition of RCC any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.
M&L Mild stee lTMT bars 8 mm dia and up to 10mm cut to length bent to shape required including crancking, bending spirally and binding with and including steel wire (annealed) not less than 0.90mm dia (quality confirming to TMT Fe 500D),
M&L Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290, Gde-E-165.
M&L for Formwork to sides of concrete foundation, footing sides and soffit of foundation, vertical or batter rough finished surfaces of concrete flat and similar works all as specified and directed.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick ( horizental or sloping ) for rough finished surfaces on concete complete all as specified and directed.
M & L for rendering 15mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing in Cement Mortar 1:4 (using WPC as per manufacturars inatruction ) finished even and smooth without using extra cement.
Supply only integral water proofing compound.(WPC)
M & L applying two coats of cement base paint including preparation of newly plastered surface of wall. complete all as specified.
M & L for rendering 10 mm thick on Brick masonry surfaces or surfaces other than fair face of brick work in cement mortar 1:6, to be finished even and smooth (without using extra cement). complete all as specified.
M & L applying three coats of white washing including preparation of newly plastered surface of wall. complete all as specified.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
All as per item above but plain sheet as in roof covering /cladding to wall fixed with tapping screws.
Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutter from the fame).
Taking down chowkhats or frame not exc 1.5 Sqm each ( without taking off shutters from the frame).
M & L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints. complete all as specified.
S & F Plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified.
S & F Flush shutters 35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete.
M&L for second class soft wood 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.
M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths. complete all as specified.
S & F Mild Steel butt hinges 100mm long medium weight.
S & F Mild Steel butt hinges 75mm long medium weight.
S & F 200 Mild steel barrel tower bolts, stove enamelled black, with bright bolt
S & F 150 Mild steel barrel tower bolts, stove enamelled black, with bright bolt
S & F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.
S & F aluminum handles, cast type, anodized 150mm long.
S & F aluminum handles, cast type, anodized 125mm long.
2nd class soft wood Plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails.
2nd class soft wood Plain fillet, square, rectangular or triangular in section, clean sawn exc 6 Sqcm sand not exc 13 Sqcm secured with nails.
M & L sheet glass 3mm thick ordinary quality and glazing with oil putty / wooden beading of appropriate size in square/ rectangular n.exc 0.5 in each pane, 3mm thick. complete all as specified.
S& F plywood, grade BWR type BB fixed with screw to timber frame of 12mm thick complete all as specified and directed.
S&F Eaves Boarding of 20mm thick of 2nd class Softwood fixed with nails in any situation (except flooring and skirting), Planed one side with butt joints. complete all as specified.
M&L hard core of guge n.exc. 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface. complete all as specified.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified.
M& L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed bed laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L 75 mm thick plain cement concrete type D2 1:4:8 using 40 mm graded crushed stone aggregate as in sub base complete all as specified and directed by Engr-in-Charge.
M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb or mud stops rounded or chamfered on edges all as specified for copping, including weathering slightly rounded or chamfered using form work (Straight or curved).
M&L for 75mm thick PCC 1:3:6 C-1 using 20mm graded crushed stone aggregate over hard core of broken stone aggregate over compacted formation as in plinth protection finished even and fair. Plinth protection is to be casted in panels not exc. 2 Sqm each in an outward slope of 1 :10 with 6mm joints filled with bitumen mastic filling complete all as specified and as directed.
M&L for excavation in trenches n.exc 1.5m wide and n.exc. 1.5m in depth, for foundation, etc and getting out in any type of soil.
M & L for PCC 1:4:8 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete.
M & L two coats of synthetic enamel paint over a priming coat with red oxide over steel surface over 10 cm width or girth all as specified.
M&L for coloured ceramic tiles 600 x 600 mm 8-10mm thick as in flooring, set & jointed in neat cement slurry and pointed in white or colured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.
S&F Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with with L-type or J-type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275m complete all as specified and directed by Engr-in-Charge.
S&F 0.63MM thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275. fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation board / slabs/ blankets any thickness including cover fillets.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
Mild steel works as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
M&L 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on wall complete all as specified.
M&L 9 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work in ceiling complete
S & F in repair floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring , fixed in floor with over all ( length of cover plate 140 mm) complete all as specified and directed.
S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil.
Damp proof course in PCC 1:2:4, type B-0, 40mm thick to horizontal or vertical surfaces including necessary formwork all as specified and directed.
M&L of 6mm thick E board (classic) of size 605x605mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including GI adjustable suspender of required length including taking down dismantling existing old ceiling of any description complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Point wiring with 1.5 Sq mm multi standerd insulated copper conductor single core PVC insulated cable 1100 volt including casing and caping for one light point controlled by one switches including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover incl PVC insulated 1.5 Sqmm copper conductor as earth wire for one light controlled by one switch completed all as specified and directed.
All as per item above but for 3-pin socket out let 5 Amps on the same board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.
All as per item above but for 3-pin socket out let 5 Amps on independent board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.
All as per item above but for 3-pin socket out let 15 Amps on independent board with 2.5 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous continous1.5 Sqmm earth wire.
Supply and fixing in replacement of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for LED bulb 7 watt. Make : Havells/Anchor/Siska/Philips/Bajaj.
Supply and fixing in replacement of LED 7 Watt Bulb with B22 pin, of make Havells/ Syska/ Philips, suitable for fixing in holder as above.
M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.
Supply and fixing LED light fitting, 1x9 W bulk head luminaries, with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ. Make : Bajaj/Havells/Anchor/Philips.
S&F Switch piano 6 Amps single pole one way. Make : Havells/Anchor/Philips.
S&F ceiling rose surface bakelite 65x50mm two to three terminals (ISI Marked). Make : Havells/Anchor/Philips.
S&F socket outlet 2-in-1 5 pin 6 Amps (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips.
S&F Switch socket combination 5 in 1, 5 and 15 Amp universal controlled by by one switch (ISI Marked). Make : Havells/Anchor/Philips.
S&F in replacement of sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/LEGRAND/SSK.
S&F in replacement of sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/LEGRAND/SSK.
S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutal (SPN) 6-40 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips
S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips
Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to galvanized iron wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15mm dia, GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work in any type of soil PCC 1:2:4 as in earthing pit CI pit cover 5.5mm thick common salt charcoal all as specified.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, cable flat or circular of size 10sqmm, two core including taking down old services cable and removing from the site complete all as specified and as directed. Make : Havells, Plaza, Gloster, Polycab.
M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white colour casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.
RCBO, singal pole and neutral (SPN) 30mA, 240 VOLT 50Hz 10 Ka, 32AMPS all as specified and directed. Make : Havells/MDS/Legrand.
BASHIR AHMED MALIK
M/S ALBURAQ INFRATECH PRIVATE LIMITED
M/S AKHLAQ ENTERPRISES
M/S MUNEER AHMAD WANI CONSTRUCTIONS
Bidder Name
BASHIR AHMED MALIK
M/S SAJAA CONSTRUCTION COMAPNY
M/S ALBURAQ INFRATECH PRIVATE LIMITED
M/S MUNEER AHMAD WANI CONSTRUCTIONS
M/S AKHLAQ ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .