SPECIAL REPAIR REPLACEMENT OF METALLIC Y SHAPE ANGLE WITH CONCERTINA WIRE AND PROVN OF RETAINING WALL UNDER GE I GOS

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Old Size Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) any description and laid in any position complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying One coats of cement based paint over a coat of primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc all as specified and directed by Engr - in - Charge.

M&L preparation of new steel surfaces of any description n exc 10cm in width or girth and priming with red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

S&F Angle iron posts and rails,drilled and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165.

Mild screw bolts (Machine made) with hexagonal or square head at one ends and to fitted with washers and one hexagonal or square n.exc 15cm long, dia of neck 11 to 15mm all as specified and directed by Engr-in-Charge.

S&F in repairs Galavinised 2 strand steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing tying at crossing with and provision of galavanised mild steel wire staples pins etc as directed (each line wire to be measured) all as specified and directed.

Taking down concertina coil of 1050mm dia in stress position not deep and aligned steel wire coated with CIR anti corrosive paints complete all as specified and directed.

M&L for concertina coil of 600 mm dia in stress position not deep and aligned steel wire coated with CIR anti corrosive paints making diamonds shape with the help of dove tail clips (18 SWG ) fixed over barbed wire with the angle iron, the concertina coil is to be fixed with barbed wire at points where coil touched the bottom points where coil touched the bottom barbed wire with the help of lug rings (24 SWG) complete all as specified and directed. Make-Indian quality product Zone/Rashtriya Ispat/Global Techno Pvt Ltd/Suraksha Industries/Shakti Industries.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing surplus excavated earth (soil) to a distance exc 250 m but n.exc 500M & depositing where directed at a level n. exc 1.5 m above the starting point.

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation/mass concrete, filling etc, complete .

M&L walling of random rubble stone masonary uncoursed well bonded bedded solidly hearted brought to courses built in CM 1:6 complete

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses for granite or trap stone, hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 40mm complete all as specified and directed.

M & L for raised pointing to random or polygon rubble, uncouersed or brought upto courses in cement mortar 1:3 complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate in coping over retaining wall incl necessary form work.

M & L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75mm bore of pipe etc. complete all as specified and directed.

M/s MAA BHAIRABI ENTERPRISES (BID ID -3250167)

HARAGOURI SUPPLIERS (BID ID -3250237)

ABC CONSTRUCTION COMPANY (BID ID -3251367)

M/S SIWALIK AND CO (BID ID -3247286)

M/s M M Engineering Systems (BID ID -3251444)

M/s Ats Electricals (BID ID -3250403)

DHABALESWAR ENGINEERING WORKS (BID ID -3247314)