SPECIAL REPAIRS TO STREET LIGHTS IN EXPLOSIVE AREA AT NAD KARANJA

Amount

Taking down and dismantling of existing unserviceable street light fitting of any wattage and stacking properly at location complete all as specified and as directed by Engr-in-charge.

Refixing serviceable street light fitting obtain from ser item No.01 in position after erection of new pole /old street light pole complete all as specified and as directed by Engr-in-charge.

Dismantling of existing unserviceable street light poles making good disturbed surfaces complete all as specified and as directed by Engr-in-charge.

Supply and erection of steel tubular swaged pole 410 SP 22, 8.5 Mtr long complete with cast iron base plate, finial Taper plug, bolts, nuts, and screws as specified type conforming to IS 2713 complete including two coats of aluminium paint over one coat of red oxide zinc chrome primer on external exposed surfaces and two coats of black bituminous paint on portion embedded in concrete in internal surfaces of pole complete all as specified and as directed by Engr-in-charge.

Dismantling existing steel tubular/ rail pole taking down carefully for reuse, making good and disturbed surfaces and re-installation of the same at location as shown by Engr in charge / JE (E/M) with consultation of users complete all as specified and as directed by Engr-in-charge. Note: Earth work and PCC required only will be measured and paid seperately under relevant item of schedule.

Supply and fix for pressure die cast aluminium with toughned glass and individual high power LED with secondary optics IP66 protection, EDGE series, 90 Watt and accessories complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs LED flood light luminaire energy saving environmental friendly with secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion with IP66 protection, turbo LED series, 180 Watt and accessories suitable for highlighting architectural facade complete with fixing arrangement with clamps, nuts, bolts etc., complete all as specified and as directed by Engr-in-charge.

Excavation in trenches for not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in soft /loose soil including taking out faulty cable/ cable, cable covers and GI pipe complete all as specified and as directed by Engr-in-charge.

Excavation in trenches not exc 1.5 mtr wide and exc 1.5 mtr depth and getting out in hard soil including taking out faulty cable/ cable covers and GI pipe complete all as specified and as directed by Engr-in-charge.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25cms complete all as specified and as directed by Engr-in-charge.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.

Material and labour for dry river sand as sand cushioning for protection of UG cable including punning of sand in layers complete all as specified and as directed by Engr-in-charge. Note: Only punned thickness shall be measured for payment.

Supply and laying un-reinforced precast concrete cable cover class LV type 1, flat size 250x150x40mm complete all as specified and as directed by Engr-in-charge.

Laying only serviceable existing LV cable cover obtained from item No. 14 complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair, jointing, connecting and testing in trenches XLPE /PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminium conductor in trenches / ducts of following sizes including taking out cable cover and existing cable of following sizes complete all as specified and as directed by Engr-in-charge.

4 core 16 Sqmm

3.5 core 25 Sqmm

3.5 core 35 Sqmm

3.5 core 50 Sqmm

3.5 core 70 Sqmm

Relaying of serviceable LT UG cable obtained from ser No 15 including sand filling, laying of cable cover returing and refilling and removal of surplus spoil and soil complete all as specified and as directed by Engr-in-charge.

2/3.5/4 core 10 to 16 sqmm

2/3.5/4 core 16 to 50 Sqmm

Material and labour in repair for GI pipe light grade 40 mm bore with all fittings complete laid in trenches and taking out existing unserviceable GI pipe complete all as specified and as directed by Engr-in-charge.

Material and labour for PCC type C2, 1:3:6 (Using 40 mm graded stone aggregate) in foundations, filling and mass concrete includings necessary form work complete all as specified and as directed by Engr-in-charge.

Material and labour for PCC type B-1, 1:2:4 (Using 20mm gradded stone aggregate) as in coping, including form work complete all as specified and as directed by Engr-in-charge.

Supply and fix for FRP moulded cable looping box of size 250x150x100mm complete with electrolytic aluminum bus bar of 100A capacity for 3 phase and neutral fixed on ebonite insulator and one MCB 6-16 A complete all as specified and as directed by Engr-in-charge.

Material and labour for street light bracket 1.5 mtr long made out of 40mm dia medium grade GI tube one and duly welded with 100mm dia 30 cm long GI tube including provision of 4 Nos holes duly threaded for fixing the bracket on the top of existing poles with complete including arrangment of threading and welding work required for fixing of street light fitting complete all as specified and as directed by Engr-in-charge.

Material and labour for earthing complete with GI earth plate electrode 600x600x6mm buried directly in ground vertically to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including GI wire 4mm dia by means of bolts, nuts and check nuts and washers etc made of GI and connected to earthing test point and earth dolly all as shown in elect plate No 3 of SSR Pt-I incl all necessary earth work, excavation, PCC chamber, chamber cover with handle (PCC 1:2:4) including 40 mm dia protection pipe and 20 mm dia watering pipe and wire mesh funnel etc., complete all as specified and as directed by Engr-in-charge.

Supply, stringing, drawing and connecting three core PVC insulated multistranded 1100 volt grade copper conductor cable of size 2.5 sqmm through existing pole/ pipe complete all as specified and as directed by Engr-in-charge.

M.K Enterprises

SREE HARITHA ASSOCIATES

R A Electric Co.

D.N.PATIL

Urja Techniques India Pvt. Ltd.

Om Construction

somnath engineering corporation

DARSHAN CONSTRUCTION Co.

SWAMI CONSTRUCTION