Construction of Library Building at Yaradona Village in Karatagi Taluka

Construction of Library Building at Yaradona Village in Karatagi Taluka

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing Coursed rubble masonry (first sort) with hard stone in foundation

and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Coursed rubble masonry (second sort) with hard stone in

foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by r...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Providing and laying water proofing treatment to the Roof with PU based

single component elastomeric pure polyurethane based coating on New

terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and Removing Centering shuttering strutting propping etc and removal of form work for foundation Appendix I Percentage on finished rate of Concrete Per Cum Footing F 1 and F 2

Providing and Removing Centering shuttering strutting propping etc and removal of form work for foundation Appendix I Percentage on finished rate of Concrete Per Cum Columns

Providing and Removing Centering shuttering strutting propping etc and removal of form work for foundation Appendix I Percentage on finished rate of Concrete Per Cum Proptico Beam

Providing and Removing Centering shuttering strutting propping etc and removal of form work for foundation Appendix I Percentage on finished rate of Concrete Per Cum Roof Beam

Providing and Removing Centering shuttering strutting propping etc and removal of form work for foundation Appendix I Percentage on finished rate of Concrete Per Cum Slab

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1

cement : 4 coarse sand) including cost of all materials, labour...

Providing Salwood frames of doors, windows, clerestory windows,

ventilators and other frames, wrought, framed or assembled including

making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing in position fully panelled Mathi/Nandi wood shutters

for doors with stiles and rails of 40mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per dra...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to openi...

Providing and fixing in position fully panelled Honne wood shutters for

doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm

wide top rail and stiles 100mm wide as per drawing a...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

fine sand) on concrete surface / ceilings including rounding off corners

wherever required smooth rendering, providing and removing s...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3

coarse sand) finished with a floating coat of neat cement to brick masonry

including rounding off corners wherever required smooth re...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix 1:3 (1 cement:

3 fine sand) including rounding off corners wherever requir...

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 m...

Finishing with Deluxe Multi surface paint system for interiors and exteriors

using Primer as per manufacturers specifications: Two coats applied on

walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with textured exterior paint of required shade :New work

(Two coats applied @ 3.28 L/10 m²) over and including priming coat of

exterior primer applied @ 2.20kg/10 m² to give an even ...

Providing and fixing hand rail of approved size by welding etc. to steel

ladder railing, balcony railing, staircase railing and similar works,

including applying priming coat of approved steel primer....

ELECTRICAL WORKS

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Supplying 4mm thick plastic sheet with necessary nitches for

fixing switches, regulators etc, and fixing on existing wooden or

metal box using N.F. screws.

Supplying 6A flush type socket and 6 A flush type SP switch either

surface/flush mounting in existing gang box or in 4mm thick plastic

sheet and fixing over a flush mounted wooden box and wiring using...

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293.

Supplying And fixing/replacing of 6/16/32A electrical

accessories on existing switch board.

Supplying and fixing of slim patty fitting, made out of CRCA Sheet

metal body with locking type holder completely wired. Excluding

Ballast & Fluorescent Tube.

Supplying & fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and 'C' Type

curve, indicator ON/OFF, energy cross-3 with Short circuit breaking

Supplying capacitor type ceiling fan complete with down rod blades,

shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase

AC supply conforming to ISS-374- 1979 and with double ball be...

Fixing all types and all capacities of fluorescent /false ceiling / spot

light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders

using 23/0.0076" twin twisted PVC insulated wires, r...

Fixing a ceiling / Wall mounting fan of all capacities and all types to

the existing 'S'' hook with fan regulator to the existing board together

with supplying and fixing 5 A. ceiling rose, necessary ...

Pre - Paid Energy Meter 3 Phase, 5-30 Amps, 1.0

Accuracy Class with Key Pad Technology consumer

interface unit along with pillfer proof box

Supplying heavy gauge PVC conduit pipe . dia . mm thick

confirming to IS 2509 with suitable size bends, junction boxes,

adhesive paste etc , and fixing using inverted wood plugs in case of

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick

with suitable size bends, metal junction boxes adhesive paste etc., by

groove cutting in the wall and fixing by bracing U or J hooks and

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Supplying and fixing sheet Metal box made out of 18 SWG sheet

metal with necessary holes for cable/conduit entry as required with one

coat of primer of approved make etc.75 x 75 x 65 mm

Supplying and fixing sheet Metal box made out of 18 SWG sheet

metal with necessary holes for cable/conduit entry as required with one

coat of primer of approved make etc.135 x 75 x 65 mm

Supplying and flush mounting teak wooden box without front plank,

made of not less than 12 mm thick wood, after due groove cutting,

finishing with necessary cement plastering complete.12" x 12" x 3" (...

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with required

nos. of machine screws, bolts nuts etc., complete on the existing

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

MATERIAL SUPPLY

WALTER Steel Bookcases conforming to IS 7761 Grade 0 of IS 513 MS Governing Standard Conformity to IS 7761 Mild Steel Sheets Grade 0 of IS 513

Neelgagan NEELGAGAN ENTERPRISES Chair Arm with Brown Conformity to Specification IS 13713 Chair Arm with Colour Family of

EXECUTIVE CHAIR Mid Back Revolving Chair of Adjustable height with Wheels Type of Chair Revolving Chair of Adjustable Height with Wheels seat upholstery material Mesh fabrics Backrest Height Low Back ...

Table Top Materiel type marine Ply Availability top edge No Thickness of Table Top Edge Tolerance 5 mm NA Table Edges NA Length of Table Top Tolerance 50 mm 900 mm Depth of Table Top Tolerance 20 mm 6...