GE/ALP (8922)/KOL OF 2020-21

Amount

Taking down ceiling fan of any type, any make and any sweep for repairing,opening the body and blade, checking for repalcement of unserviceable spares,cleaning, overhauling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid as supply only under respective item of BOQ.

Rewinding of ceiling fan, 1200mm sweep with super enamelled copper wire including insulation with polyster paper/manllex paper with cotton binding, heat varnished and including flexbile cable of suitable size and length for electric connection complete all as specified and as directed.

All as per item No 2 here-in-before but for 1400mm sweep. complete all as specified and as directed.

Supply only ball bearing of size 6201/6202/6203 complete all as specified and as directed.

Supply only metal bush bearing suitble for ceiling fan 1200/1400 mm sweep of any type and size complete all as specefied and as directed.

Supply and fixing of ceiling fan shaft suitable for 1200/1400 mm sweep of any type and size complete all as specified and as directed

Supply only capacitor for ceiling fan 2.25 MFD complete all as specified and as directed.

Supply only capacitor for ceiling fan 2 MFD complete all as specified and as directed.

Supply only fan blade (3 Nos blade is one set) 1200 mm sweep suitable for USHA/Havells/Bajaj or equivelent make fan and complete all as specified and as directed.

Supply only fan blade (3 Nos blade is one set) 1400 mm sweep suitable for USHA/Havells/Bajaj or equivelent make fan and complete all as specified and as directed.

Supply and fixing in repair stepped type electronic fan regulator of AC 120/280 volt complete all as specified and as directed. Make : Anchor/LEGRAND or equivalent.

Supply and fixing as in repair of MS clamps made out of 50 x 6mm flat iron suitable for hanging of ceiling fan on pipe including necessary cutting, threading, drilling, fixing arrangement split pin, nuts, bolts washer etc complete all as specified and as directed.

Material and labour for in replacement of fan hooks, of suitable size with M S flat iron 50x6mm suitable for hanging of ceiling fan fixed to concrete slab or any other place complete and making good disturbed surfaces and complete all as specified and as directed.

Supply and fixing in replacement of GI tubing 15 mm 'light grade',galvanised, with all fitting; suitable for hanging of ceiling fan as required complete all as specified and as directed.

Material and labour for spray painting of ceiling fan complete, in situ of size 1200/1400mm sweep with down rod upto 2.00 mtr long with two coats of synthetic enamel white paint by spray gun including preparation of old painted surfaces complete all as specified and as directed. by Engineer-in-Charge

Taking down exhaust fan/wall mounted fan/pedistal fan of any type, any make and any sweep, by opening of body carefully checking for repalcement of unserviceable spares, including replacement of spares by new one, re-assembling of all components in original position, cleaning, oiling greasing, testing and fixed in original position Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only" complete all as specified and as directed.

Rewinding of exhaust fan, 300mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and complete all as specified and as directed.

All as per item No 17 here-in-before but for 350mm sweep. complete all as specified and as directed.

All as per item No 17 here-in-before but for 400mm sweep complete all as specified and as directed.

All as per item No 17 here-in-before but for 200mm sweep complete all as specified and as directed.

All as per item No 17 here-in-before but for wall mounting fan 400mm sweep complete all as specified and directed by the Engr-in-Charge.

All as per item No 17 here-in-before but for pedestal fan 400mm sweep complete all as specified and as directed by the Engr-in-Charge.

Supply only capacitor 4.00 MFD complete all as specified and as directed.

All as per item No 23 here-in-before but 3.15 MFD complete all as specified and as directed by the Engr-in-Charge.

Supply only Exhaust fan blade of capacity 300mm sweep suitable for Model no: USHA/Havels or equivelent make complete all as specified and as directed.

Supply only Exhaust fan blade of capacity 400mm sweep suitable for Model no: USHA/Havels or equivelent make complete all as specified and as directed.

All as per item No 25 here-in-before but Exhaust fan of capacity 350mm sweep complete all as specified and as directed by the Engr-in-Charge.

All as per item No 25 here-in-before but Exhaust fan of capacity 200mm sweep complete all as specified and as directed by the Engr-in-Charge.

Material and labour for preparation of exhaust fan, wall mounting fan & pedestal fan and applying one coat of grey/ white synthetic enamel paint by spraying using spray gun with filling cavities and preparation of surfaces, taking down and refixing complete all as specified and as directed.

Taking down geyser and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to made it leak proof including testing pressure and assembling of all component refixing complete for 25 Ltr capacity. Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only" complete all as specified and as directed.

Supply only heating elements of 2 KW 230 V suitable for existing water heater of any type including connection with suitable cable complete all as specified and as directed. Make : Usha/Venus/Havells

All as per item No 31 here-in-before but of 1.5 KW complete all as specified and as directed by the Engr-in-Charge. Make : Usha/Venus/Havells

Supply only thermostat switch of geyser 230 V, 30 degree to 90 degree centigrade temp range to be set at 70 degree to 50 degree centi grade suitable for existing water heater. complete all as specified and as directed. Make : Usha/Venus/Havells

Supply only electronic digital type tempreture indicator as suitable for existing water heaterall complete all as specified and as directed. by engr-in- charge

Supply only indicating lamp, 230 V, flush type, rectangular, red and green indicator suitable for water heaters. complete all as specified and as directed.

Supply only PVC inlet connector pipe 450mm long for geyser, heavy duty,with brass coupling both ends sutiable to fix inlet of geyser. complete all as specified and as directed.

Supply only 450mm long brass CP connection with 2 nuts without nipple suitable for geysers. Make : Jaquar Cat No 805B or equivalent. complete all as specified and as directed.

Material and labour preparation to old painted surface of storage water heater and painting of geyser 25 ltr capacity with two coats of synthetic enamel paint (white) by using spray gun complete all as specified and as directed.

All as per item No 38 here-in-before but for 35/50 ltrs capacity. complete all as specified and as directed.

Supply and fixing as in repair for Split cover made out of 22 guage sheet duly painted with synthetic enamel paint suitable for water heater of 25 ltr capacity. complete all as specified and as directed.

Supply and fixing as in replacement patented nano polymer coated steel inner tank of 25Ltr capacity geyser suitable for model of make: Cromption/Usha/Bajaj complete all testing and make good in disturbed surface at existing location and complete all as specified and as directed.

Supply and fixing as in replacement copper inner tank of 25 Ltr capacity geyser suitable for model of make Usha/Bajaj/Cramption complete all as specified and as directed.

Supply and fixing as in repair for non return valve, 15mm bore, screwed down high pressure, cast copper alloy, chromium plated. complete all as specified and as directed.

Supply and fixing as in repair for pressure release valve 15mm bore 'T' type at inlet/ outlet or dead weight type heavy duty. complete all as specified and as directed.

Supply and fixing as in repair for apparatus plate , including all accessories suitable for water storage heater type 25 ltrs capacity. complete all as specified and as directed.

All as per item No 45 here-in-before but for 35/50 ltrs capacity. complete all as specified and as directed.

Supply and fix as in repair for fusible plug , calibrated 95 deg to 100 deg C suitable for water heater. complete all as specified and as directed.

Supply and fixing as in repair for glass wool , between the inner and outer vessel of water heater any type and capacity. complete all as specified and as directed.

Supply and fixing as in repair for PVC insulated flexible copper conductor cable (FRLS) 2.5 Sqmm 3 core , 1100 Volts grade conforming to IS 694. complete all as specified and as directed.

Supply and fixing in repair 15 Amp plug top complete all as specified and as directed.

Supply and fixing as in repair 15mm dia GI nipple, 2" long including GI socket. complete all as specified and as directed.

Supply and fixing rubber gasket as in repair for appratus plate any type/capacity complete all as specified and as directed.

Supply and fixing in repairs Bib taps, cast copper alloy, CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 20 mm dia complete all as specified and as directed

Supply and fixing in repair of geyser's inner tank supporting plate made of stainless steel in" L"shape including suitable size hole , drilling ,nut bolt clamp, complete all as specified and as directed by engr-in- charge

Material and labour in repair for point wiring in repairs for one light/fan/call bell point with single core 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including single core 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through PVC conduit pipe with all accessories and sunk cast pressed steel terminal box made out of MS sheet 1.25mm thick for mounting of fittings like switch, socket and fan regulator with 3mm thick bakalite sheet cover after and including taking down of old existing point wiring including fitting and making good the distrubed surfaces as per the existing complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No 55 here-in-before but for 3 pin 6 Amps switch socket combination on the independent board with 1.5 sqmm cable complete as specified and directed.

All as per item No 55 here-in-before but for switch socket combination 2 in 1,3 pin 5/15 Amp on independent board with 2.5 Sqmm PVC unsheathed copper cable and 1.5 sqmm copper conductor cable as earth continuity conductor complete as directed.

Material and labour for in repair switch socket combination 2 in 1, 5 pin 5 Amps, 240 V Flush type/Box type, complete all as specified and as directed. Make - Anchor Cat No: 38820 or equivelent make as per list of manufactures.

Supply and fixing in repair switch socket combination 2 in 1,5/15 Amps, 230 Volts, flush /Box type universal complete all as specified and as directed by the Engr-in-Charge. Make : Anchor Cat No Cat No 38808/50665 or equivalent approved make as per list of manufactures.

Supply and fixing in repair switch piono, flush type 5 Amps 230 Volt single pole, one way complete all as specified and as directed by the Engr-in-Charge. Make : Anchor Cat No 14111 or equivalent approved make as per list of manufactures.

Supply & fixing as in replacement sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 Amps SP MCB 240 Volt complete all as specified and as directed.

Supply and fixing in repair ceiling rose surface bakelite three terminal 65 x 50mm, PVC/Polycarbonate,isolated body complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing sub-main wiring (surface type) for main DB's to sub DB's with PVC (FR-LSH) insulated & unsheathed two runs of 6 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 6 sq mm PVC (FRLSH) insulated & unsheathed copper conductor cable, 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC casing & capping carefully and taken down old existing aluminium sub main wiring with accessories complete all as specified and as directed by the Engr-in-Charge. Note : Two runs of 6 sqmm and one run of 6 sqmm cable and casing & capping shall be measured as one unit.

Supply and fixing sub-main wiring (surface type) for main DB's to sub DB's with PVC (FR-LSH) insulated & unsheathed two runs of 4 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 4 sq mm PVC (FRLSH) insulated & unsheathed copper conductor cable, 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC casing & capping carefully and taken down old existing aluminium sub main wiring with accessories complete all as specified and as directed by the Engr-in-Charge. Note : Two runs of 4 sqmm and one run of 4 sqmm cable and casing and capping shall be measured as one unit.

Supply and fixing sub-main wiring (surface type) for main DB's to sub DB's with PVC (FRLSH) insulated & unsheathed two runs of 2.5 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 2.5 sq mm PVC (FRLSH) insulated & unsheathed copper conductor cable, 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC casing & capping carefully and taken down old existing aluminium sub main wiring complete all as specified and as directed. by the Engr-in-Charge. Note : Two runs of 2.5 sqmm and one run of 2.5 sqmm cable and casing and capping shall be measured as one unit.

Supply and Fixing in replacement MCB, single pole, 240 Volts, of capacity (6-32 Amps) 'C' series breaking capacity 10 KA. complete all as specified and as directed.

Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts , breaking capacity 10KA complete all as directed. complete all as specified and as directed.

Supply and fixing in repair MCB TPN 40 to 63 Amps, 415 Volts , breaking capacity 10KA complete all as directed. complete all as specified and as directed.

Material and labour for taking out unserviceable DBs of any type / capacity incl MCBs for fixing of new or old all complete all as specified and as directed.

Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. by the Engr-in-Charge.

Supply and fixing as in repair MCB DB SPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. by the Engr-in-Charge.

Supply and fixing as in repair MCB DB SPN (double door) 2 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.Make-HPL or equivalent grading ISI marked.

Supply and fixing as in repair MCB DB TPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.make HPL or equivalent of other make

Supply and fixing as in repair MCB DB TPN (double door) 12 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge

Supply and fixing in repair modular Fan regulator upto 100 watt ,230 volt,suitable for fitting in existing accessories complete all as specified and as directed. Make : Indoasian/ Anchor/ Schineider or equivalent of other make.

Material and labour for modular switch socket combination 2 in 1, 5 pin 5/6 Amps, 240 V suitable for fitting in existing accessories , all as specified. complete all as specified and as directed. Make : Indoasian/ Anchor/ Schineider or equivalent of other make.

Supply and fixing modular switch socket combination 2 in 1,5/15 Amps, 230 Volts, universal suitable for fitting in existing accessories complete all as specified and as directed by the Engr-in-Charge. Make : Indoasian/ Anchor/ Schineider or equivalent of other make.

Supply and fixing switch modular type 5/6 Amps 230 Volt single pole, one way suitable for fitting in existing accessories complete all as specified and as directed by the Engr-in-Charge. Make : Indoasian/ Anchor/ Schineider or equivalent of other make.

Supply and fixing in repair of surface mounting Plastic boxes 3 module including cutting for fixing of switch ,socket etc complete all as specified and as directed. by Engr -in- Charge

Supply and fixing in repair of surface mounting Plastic boxes 6 module including cutting for fixing of switch ,socket etc complete all as specified and as directed. by Engr -in- Charge

TOTCO

PUTUL CONSTRUCTION CO.

SEN ELECTRIC WORKS

RADHA ENTERPRISE