Construction of toilet in G G Chopra High School Savadatti Savadatti Town of Savadatti Taluk. Dise No 29011215803

Construction of toilet in G G Chopra High School Savadatti Savadatti Town of Savadatti Taluk. Dise No 29011215803

Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing ramming watering, including cost of all materials and labour with ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Shuttering work , Isolated foundation of Builduing percentageon finished rate of conerete per m3 is FR 8% with all lead, lifts, loading & unloading charges including cost and conveyance of all materia...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm indepth, consolidating each deposited layer by ramming and w...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Formwork,Centering & Scaffolidingwork, Column of Builduing with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and ot...

Formwork,Centering & Scaffoliding work , Plint beam of Builduing with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Formwork,Centering & Scaffoliding work for Roof slab beam and lintle , of Builduing with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments...

Formwork,Centering & Scaffoliding work for Roof slab, of Builduing with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinar...

Supplying, and fitting placing TMT EF 550 / 550D steel reinforcement including cost of all materials, machinery, labour,cleaning,straightening ,cutting ,bending, hucking,laping/welding joints,trying w...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all material...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming ...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Orissa pattern W.C. pan of size 580x440 mm with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental c...

Finishing walls with water proofing cement paint of required shadeOld work (one coats applied 2.20 kg 10 m over priming coat of primer applied 0.80 litrs/10 m complete including cost of Priming coat i...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls 1.25 L 10 m over and including one coat of Spe...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments25 mm dia PVC Elbows with all lead, lifts,...

Providing and fixing Brass full way valve gate with C.I. wheel ofapproved quality (screwed end) 25mm with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, l...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

13.17 Providing and fixing PTMT bib cock of approved quality and colour. 20 mm nominal bore, 89 mm long, weighing not less than 88 g with all lead, lifts, loading & unloading charges including cost an...

Providing and fixing G.I. Union in G.I. pipe including cutting and threadingthe pipe and making long screws etc complete 25mm (New work with all lead, lifts, loading & unloading charges including cost...

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. omplete.25mm dia PVC couplers wi...

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 25 mm dia PVC Tee with all lead, lifts, load...

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments with all lead, lifts, loading & unloading c...