Loading
Loading…
Loading…
Tender Value
₹82.1 L
EMD Value
₹1.6 L
Closing Date
10 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
SR.DEN/1
14 conditions · 3 needing a document upload
Item no 10.2 of GCC 2022: Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. As per Clause 10.2 of Indian Railways Standard General Conditions of Contract'2022 with upto date correction slip. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE-I/CT/GCC-2022/Policy dated 14.07.2022]
SIMILAR NATURE OF WORK FOR THIS CONTRACT- EXECUTION OF ANY CIVIL ENGINEERING WORK.
21 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Para 5(3) ii. Part I of GCC shall be read as under: The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids [i.e. excluding the last date of submission of bids] [Advance Correction Slip No.5 to Indian Railways Standard General Conditions of Contract, April 2022 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 20.10.2023].
The participating Bidder must submit self certificate [Annexure V & VA as applicable] duly downloaded from the link given in Submission of Document Verification Certificate or documents uploaded along with tender. [Advance Correction Slip No.3 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 26.04.2023 and Advance Correction Slip No.4 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 07.08.2023 ].
Maintenance period of contract - The Earnest Money/Bid Security deposited by the contractor will be converted into Security Deposit and will be refunded after six months of the date of completion of the work in all respect to the entire satisfaction of the Railway and on receipt of a certificate from the Assistant Engineer concerned.
All documents in support of fulfillment of eligibility criteria with respect to completion of similar nature of work for Technical Eligibility Criteria and Total contract value for Financial Eligibility Criteria should be submitted/ uploaded online in the website with scanned copy at the time of tender bidding with details showing in Annexure I, IV. No post tender communication, in any form will be made or entertained, after opening of tenders, in this regard. Railways may however call for the originals of the credentials for verification or any clarifications/confirmations on the contents of the documents submitted. Eligibility of tenderers shall be decided solely of the basis of the documents submitted along with the tender offers and any subsequent document whatsoever submitted in this connection would not be given any cognizance for finalization of the tender.
Payment through Letter of Credit is applicable for this tender as per Railway Board's letter no 2017/ACII/9/10 Pt I dated 20.02.2018 & 2018/CE-I/CT/9 dt. 04.06.2018 (Annexure B & C attached).
INSTRUCTION TO BIDDERS: A] The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of his obligations or liabilities hereunder nor will it affect any rights of the railway there under. B] In case of any wrong information submitted by tenderer, the contract shall be terminated, Earnest Money Deposit [EMD], performance Guarantee [PG] and Security Deposit [SD] of contract forfeited and agency barred for doing business on entire Indian Railways for 5[five] years.
Shramik kalyan Contractor[s] are requested to get themselves registered on Railways Shramik kalian portal at www.shramikkalyan.indianrailways.gov.in after issuance of letter of acceptance.
Contractor(s)/ Bidders are requested to refer to Clause 46A of Indian Railways Standard General Conditions of Contract'2022 with up to date correction slip for Price Variation Clause (PVC) in works contract. Item no 46A.1 of GCC 2022: Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs. 2 Crores. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE- I/CT/GCC-2022/Policy dated 14.07.2022]
For further details related to 'Bid Security' Bidders are requested to please connect para no 23 of the tender documents.
Bidders are requested to refer to para no 9 of tender document [Para 41 & 42 of Part II Standard General Conditions of Contract for "Variations in extent of Contract" of GCC 2022]
In case Agency desires submission of Bid Security in the form of Bank Guarantee, then please refer to para no 23(3) of Instruction to Tenderers for e-tenders, chapter I for further guidance. [Clause 5.0 of Part I of GCC 2022]
Bidders may also upload any relevant document as deemed fit.
At Sealdah officer's colony:- Repairs and renovation by treatment of leaky roof, pipe line, replacement of damaged doors and windows, modern toilet with sanitary fittings, provision of modular kitchen, colony drain etc. of different blocks of Officer's colony with all other ancillary works under SSE [Works]/SDAH under the jurisdiction of Assistant Engineer [Works]/I/SDAH.
TN-24-26-27
TN-24-26-27
Open
Works - General
12 Months
Kolkata, West Bengal
₹0
₹1.6 L
10 Jun 2026
16 May 2026
27 May 2026
120 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 50 | 286.85 | 14,342.5 |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 20 | 2,161.2 | 43,224 |
| 3 | 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 5 | 7,783.65 | 38,918.25 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 5 | 7,365.15 | 36,825.75 |
| 5 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 4 | 8,364.2 | 33,456.8 |
| 6 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 5 | 9,673.5 | 48,367.5 |
| 7 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 500 | 89.65 | 44,825 |
| 8 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 10 | 6,658.25 | 66,582.5 |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 10 | 8,288.35 | 82,883.5 |
| 10 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 100 | 1,018.05 | 1,01,805 |
| 11 | Area of slab over 0.50 sqm | Sqm | 27 | 4,425.35 | 1,19,484.45 |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 700 | 1,063.45 | 7,44,415 |
| 13 | Kiln seasoned and chemically treated hollock wood | cum | .77 | 74,199.7 | 57,133.77 |
| 14 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 37.8 | 2,818.5 | 1,06,539.3 |
| 15 | 25 mm dia | Metre | 200 | 482.3 | 96,460 |
| 16 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 800 | 197.7 | 1,58,160 |
| 17 | 125x64x2.50 mm | Each | 420 | 104.2 | 43,764 |
| 18 | 150x10 mm | Each | 240 | 232.3 | 55,752 |
| 19 | 50 mm | Each | 120 | 306.4 | 36,768 |
| 20 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. | Each | 120 | 63.65 | 7,638 |
| 21 | 125 mm | Each | 120 | 205.1 | 24,612 |
| 22 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 120 | 109.6 | 13,152 |
| 23 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 99 | 702.6 | 69,557.4 |
| 24 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. | Sqm | 31.5 | 3,963.7 | 1,24,856.55 |
| 25 | With 2nd class teak wood beading 62X19 mm | Sqm | 108 | 1,404.25 | 1,51,659 |
| 26 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. | Sqm | 500 | 2,339.6 | 11,69,800 |
| 27 | 200 mm | Each | 120 | 153.15 | 18,378 |
| 28 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 50 | 226.75 | 11,337.5 |
| 29 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in- charge. | Set | 120 | 749.7 | 89,964 |
| 30 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) | Kg | 120 | 423.7 | 50,844 |
| 31 | Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. | Metre | 500 | 38.45 | 19,225 |
| 32 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 500 | 93.05 | 46,525 |
| 33 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 500 | 111.95 | 55,975 |
| 34 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | Sqm | 25.2 | 9,397.35 | 2,36,813.22 |
| 35 | Size of Tile 600 x 1200 mm | Sqm | 950 | 1,612.75 | 15,32,112.5 |
| 36 | Size of Tile 600 x 1200 mm | Sqm | 150 | 1,612.75 | 2,41,912.5 |
| 37 | 110 mm diameter | Metre | 100 | 319.75 | 31,975 |
| 38 | 110 mm | Each | 20 | 110.6 | 2,212 |
| 39 | 110x110x110 mm | Each | 20 | 205.45 | 4,109 |
| 40 | 110 mm bend | Each | 20 | 132 | 2,640 |
| 41 | 110 mm Shoe | Each | 20 | 115.95 | 2,319 |
| 42 | 110 mm | Each | 100 | 309.5 | 30,950 |
| 43 | 1:3 (1 cement: 3 fine sand) | Sqm | 200 | 374.15 | 74,830 |
| 44 | 1:3 (1 cement : 3 fine sand) | Sqm | 200 | 253.05 | 50,610 |
| 45 | Water thinnable cement primer | Sqm | 5000 | 64.45 | 3,22,250 |
| 46 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 250 | 144.9 | 36,225 |
| 47 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 450 | 140.05 | 63,022.5 |
| 48 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | Sqm | 450 | 55.5 | 24,975 |
| 49 | Old work (one or more coats) | Sqm | 5000 | 56.8 | 2,84,000 |
| 50 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 5000 | 20.85 | 1,04,250 |
| 51 | 150 mm diameter pipes | Metre | 500 | 43.45 | 21,725 |
| 52 | One or more coats on old work | Sqm | 250 | 86.55 | 21,637.5 |
| 53 | One or more coats on old work | Sqm | 450 | 79.4 | 35,730 |
| 54 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. | Sqm | 1000 | 63.25 | 63,250 |
| 55 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | Sqm | 4000 | 111.6 | 4,46,400 |
| 56 | 3 mm thick | Sqm | 150 | 563.5 | 84,525 |
| 57 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 10 | 2,007.1 | 20,071 |
| 58 | In cement mortar | cum | 5 | 1,698.45 | 8,492.25 |
| 59 | Of area 3 sq. metres and below | Each | 10 | 118.3 | 1,183 |
| 60 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | Sqm | 50 | 46.5 | 2,325 |
| 61 | 15 mm to 40 mm nominal bore | Metre | 50 | 124.1 | 6,205 |
| 62 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. | Each | 10 | 744.6 | 7,446 |
| 63 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 500 | 45.05 | 22,525 |
| 64 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 5 | 5,781.35 | 28,906.75 |
| 65 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 5 | 5,540.55 | 27,702.75 |
| 66 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 10 | 2,275 | 22,750 |
| 67 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 5 | 1,679.6 | 8,398 |
| 68 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 5 | 1,500.05 | 7,500.25 |
| 69 | 610x510 mm bowl depth 200 mm | Each | 10 | 4,274.4 | 42,744 |
| 70 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 20 | 299.35 | 5,987 |
| 71 | 10 litre capacity - White | Each | 5 | 1,023.05 | 5,115.25 |
| 72 | White solid plastic seat with lid | Each | 5 | 586.55 | 2,932.75 |
| 73 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia | Each | 10 | 6,119.15 | 61,191.5 |
| 74 | 32 mm dia | Each | 20 | 104.35 | 2,087 |
| 75 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 20 | 45.25 | 905 |
| 76 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 20 | 1,411.15 | 28,223 |
| 77 | Rectangular shape 1500x450 mm | Each | 20 | 1,817.2 | 36,344 |
| 78 | C.P. brass | Each | 20 | 680.8 | 13,616 |
| 79 | 100 mm dia | Metre | 20 | 615.7 | 12,314 |
| 80 | Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms | Each | 20 | 103 | 2,060 |
| 81 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | Each | 10 | 204.7 | 2,047 |
| 82 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 20 | 600.35 | 12,007 |
| 83 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. | Each | 5 | 13,036.55 | 65,182.75 |
| 84 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | Each | 2 | 16,100.4 | 32,200.8 |
| 85 | 15 mm nominal dia Pipes | Metre | 100 | 255.9 | 25,590 |
| 86 | 20 mm nominal dia Pipes | Metre | 50 | 325.1 | 16,255 |
| 87 | 25 mm nominal dia Pipes | Metre | 60 | 408.55 | 24,513 |
| 88 | 32 mm nominal dia Pipes | Metre | 30 | 500.95 | 15,028.5 |
| 89 | 40 mm nominal dia Pipes | Metre | 30 | 674.35 | 20,230.5 |
| 90 | 25 mm dia nominal bore | Metre | 50 | 417.95 | 20,897.5 |
| 91 | 40 mm dia nominal bore | Metre | 60 | 558.35 | 33,501 |
| 92 | 50 mm dia nominal bore | Metre | 60 | 654.2 | 39,252 |
| 93 | 25 mm nominal bore | Each | 20 | 532.35 | 10,647 |
| 94 | 40 mm nominal bore | Each | 20 | 707.3 | 14,146 |
| 95 | 50 mm nominal bore | Each | 20 | 878.25 | 17,565 |
| 96 | 25 mm nominal bore | Each | 20 | 369.35 | 7,387 |
| 97 | 40 mm nominal bore | Each | 20 | 523.2 | 10,464 |
| 98 | 50 mm nominal bore | Each | 20 | 706.7 | 14,134 |
| 99 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 5000 | 9.7 | 48,500 |
| 100 | 15 mm nominal bore | Each | 50 | 708.4 | 35,420 |
| 101 | 15 mm nominal bore | Each | 50 | 594.75 | 29,737.5 |
| 102 | 15mm nominal bore | Each | 20 | 500.35 | 10,007 |
| 103 | 250 mm diameter | Metre | 12 | 1,293.9 | 15,526.8 |
| 104 | 250 mm diameter S.W. pipe | Metre | 12 | 1,476.35 | 17,716.2 |
| 105 | Rectangular shape 600x450 mm internal dimensions | Each | 100 | 1,255.25 | 1,25,525 |
| 106 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 600 | 466.3 | 2,79,780 |
| 107 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 300 | 564.8 | 1,69,440 |
| 108 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm | 100 | 1,325.55 | 1,32,555 |
| 109 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | cum | 7.5 | 7,510.75 | 56,330.63 |
| 110 | 50mm average thickness | Sqm | 150 | 211.55 | 31,732.5 |
| 111 | 25 mm average thickness | Sqm | 150 | 104.6 | 15,690 |
| 112 | Bars upto 12 mm diameter | Metre | 350 | 6.65 | 2,327.5 |
| 113 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer | Sqm | 150 | 117.75 | 17,662.5 |
| 114 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make | Sqm | 150 | 390.45 | 58,567.5 |
| 115 | 12 mm average thickness. | Sqm | 150 | 333 | 49,950 |
| 116 | Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. | Kg | 100 | 106.7 | 10,670 |
| 117 | Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. | Sqm | 100 | 370.15 | 37,015 |
| 118 | 25mm thick in Grade M 25 with cement content not less than 330 kg per cum | Sqm | 100 | 678.15 | 67,815 |
| 119 | 50mm thick in Grade M 25 with cement content not less than 330 kg per cum | Sqm | 50 | 1,073.45 | 53,672.5 |
| 120 | Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge. | Each | 100 | 202.7 | 20,270 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-B-LOC.pdf
ATTACHMENT
Cesscharge.pdf
ATTACHMENT
SHRAMIKKALYAN.pdf
ATTACHMENT
ComlCompliance-IVVVIVIIVIIIIXXI.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
ANNEXURE-C-LOC2.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
annexureVIBcontractualturnoverdata.pdf
ATTACHMENT
annexureVIABidsecurity.pdf
ATTACHMENT
Annexure--I_a_I_b_IIIII-TechComp.pdf
ATTACHMENT
tmtbarsdecontrolled.pdf
ATTACHMENT
Annexure-V_VA.pdf
ATTACHMENT
GCCACSUPRO_10.pdf
ATTACHMENT
TenderDocumentChapterI-II.pdf
ATTACHMENT
JPODIGGING.pdf
ATTACHMENT
LetterregardingrecommendedlistofBrands_makeofmaterialsdated03.09.2025.pdf
ATTACHMENT
GCCACS11.pdf.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .