Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹32.4 L+₹3.1 L (10.6%)Rejected-AOC 88 30 RAMASAMY GARDEN ADYAR ARUNACHALAPURAM ADYAR CHENNAI TAMIL NADU 600020 | CHENNAI | TAMIL NADU | 600020 | L2 | Rejected-AOC Not being L1 |
Tender Value
₹34.9 L
EMD Value
₹69,800
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Avadi
Garrison Engineer, Muthapudupet, Avadi, Chennai
IMPROVEMENT TO CERTAIN SECURITY INFRASTRUCTURE AT 23 ED AF STN UNDER GE AVADI
2023_MES_595255_1
8106
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer, Muthapudupet, Avadi, Chennai
Please refer tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer, Avadi
₹69,800
4 Aug 2023
13 May 2023
27 Jun 2023
13 May 2023
19 Jun 2023
29 May 2023
Amount
Surface dressing not exceeding 15cm deep and getting out in sof/loose soil all as specified.
Removing excavated material to a distance exceeding 1.5 km and not exceeding 5 km and depositing where directed at a level not exceeding. 1.5m above the starting point complete all as specified and all as specified.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth,etc and getting out hard/dense soil for foundation etc n exc 10 sqm on plan and not exceeding 1.5m depth complete all as specifed and directed.
All as per item No 3 here in before but depth exceeding 1.5 m and not exceeding 3m depth.
M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
M&L for use and waste of formwork to sides of concrete foundations, footing ,bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work; vertical to batter make rough finished surfaces complete all as specifed and as directed.
M&L for Reinforced cement concrete design mix M-30 using 20mm graded stone aggregates for rafts,footings ,foundation beams , plinth beams,base for columns etc and mass concrete complete all as specifed and directed. Note: Reinforcement and form work shall be measured and paid seperately.
M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work; make rough finished surfaces complete all as specifed and as directed.
M&L for Reinforced cement concrete design mix M-30 using 20mm graded stone aggregates as coloumns, pillars, piers, post and struts complete all as specified and directed. Note: Reinforcement and form work shall be measured and paid seperately.
M & L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc, also splays between floors and beams; make rough finished surfaces complete all as specifed and as directed.
M&L for Reinforced cement concrete design mix M-30 using 20mm graded aggregates as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. Note: Reinforcement and form work shall be measured and paid seperately.
M & L for use and waste of formwork to suspended slabs such as roof slabs, floor slabs, floor slabs landings and similar work; not exceeding 200mm thick; make rough finished surfaces complete all as specifed and as directed.
M&L for Reinforced cement concrete design mix M-30 using 20mm graded stone aggregates as in slab supported on walls, beams and colums in floors,roofs ,landing ,balconies,canopies,deck slabs and in shelves and the like complete all as specified and directed. Note: Reinforcement and form work shall be measured and paid seperately.
M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.
M&L for Reinforced cement concrete design mix M-30 using 20mm graded stone aggregates in chajjas complete all as specified and directed. Note: Reinforcement and form work shall be measured and paid seperately.
M&L for mild steel TMT bar of 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing clips complete all as specifed and as directed.
All as per item No 16 above but 6mm to 8mm dia.
All as per item No 16 above but 5mm dia and over upto and including 10mm dia in stirrups, spacer and binder complete all as specifed and as directed.
Dismantling of brick work or stone/boulder masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete article all as directed. Note: Serviceable bricks shall be stacked properly for reuse.
M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.
All as per item no 20 above but except bricks. Note : Services bricks obtained from dismantling shall used.
Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm using excavated soil complete al as specified and as directed.
Removing excavated material to a distance exceeding 250m and not exceeding 500m and depositing where directed at a level not exceeding. 1.5m above the starting point complete all as specified and all as specified.
M&L for 5 mm thick cement plaster in CM 1:4 with WPC over 10 mm thick plaster in CM 1:6 finished even and smooth without using extra cement all as specified. Note:- WPC shall be measured and paid seperately.
M&L for rendering 10mm thick in CM 1:6 on other then fair faces of brick work wall surfaces and finished fair and even complete all as specifed and as directed.
M&L for rendering 5mm thick on concrete surfaces of ceiling in cement mortar 1:3 including finished even and smooth with out using extra cement all as specified and as directed.
Material and labour for Preparation of newly plastered surfaces of walls and applying three coats of white wash all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over the coat of primer complete all as specified and as directed.
Material and labour for Preparation of newly plastered surfaces of ceilings and applying three coats of white wash all as specified and as directed.
M & L for spreading and levelling in excavated materials filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering etc., complete all as specified and as directed.
Supply and spreading Hard core of gauge broken stone or boulders not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surfaces using broken stones etc complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6, type C2 using 40mm graded stone aggregate as in plinth protection and finished concrete surface even and smooth without using extra cement complete all as specified and as directed.
Forming of construction joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' all as specified and directed.
M&L for 100mm thick plain cement concrete, 1:4:8, type D2 using 40mm graded stone aggregate as in floor/sub base complete all as specifed and as directed.
M&L for 40mm thick PCC1:2:4, type B-1, using 20mm graded stone aggregate as in floor, and finishing cement concrete surface even and smooth without using extra cement all as specified.
M&L for Rendering 10mm thick in CM 1:3 over levelling course when the concrete is green, mixed with liquid water proofing compound and finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.
Preparing the rendered surface thoroughly to remove all loose particles, dirt / dust particles and applying a uniform coat of blown grade bitumen VG-10 @ 1.20 kg/sqm conforming to IS 702 over a coat of bitumen primer @ 0.40 Litres / Sqm followed by APP membrane reinforced with polyster non woven fabric 3mm thick weighing not less than 3.8 kg / sqm laid on primed surface by forced application followed by a finishing coat of solar reflective aluminium paint @ 0.10 litres / Sqm complete all as specified and as directed. complete all as specified and as directed.
Supply only Integral Water Proofing Compound conforming to IS all as specified.
S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed.
M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of girth over 10cm width or girth including preparation of surfaces all as specified.
M & L Glazed ceramic coloured tiles of 350x250 mm/ 450x350mm and 7mm thick tiles on vertical surfaces using glazed economy finish grade B III ceramic tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering in CM 1:4 , 10mm thick on fair faces of brick/concrete wall surfaces complete all as specified and as directed.
M&L for plain Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping and benching etc. including form work if required all as specified and as directed by Engr-in-Charge
Taking down cement plaster on brick or concrete walls/ ceiling surfaces in patches etc. of any description including racking out joints, hacking for key, scrubbing down with water; rubbish off the premises etc., complete all as specified and as directed.
M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick concrete surfaces and finished even and smoot without using extra cement all as specified.
M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over the coat of alkali resistant priming paint complete all as specified and as directed.
Dismantling wrought iron work or mild steel of any description not otherwise provided complete all as specified all as directed.
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts post and struts in fencing including cutting tops to shape as direted, drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165
S&F concertina coil fencing with punched tape concertina coil 600 mm dia 10 m openable length (total 90 m) having 50 Nos rounds per 6m length, on existing angle iron Y shape, placed 2.4 m to 3 m apart and incl 09 Nos horizontal barbed wire including dimentling (each line wire to be measured and paid seperately)
Supply and fix Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall fixed with self tapping screws all as specified and as directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground all as directed.
M&L for RCC 1:2:4, type B1, using 20 mm graded stone aggregate as in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm but n exc 250 sq.cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as specified and directed.
M&L for Excavation in holes or (Similar holes) each n.exc 0.5cum, getting out in hard dense soil, returning filling in and ramming earth or broken rubber mixed with earth around in layers, n.exc 25 CM watering including removing surplus soil to a distance of 50m from starting point and making good surfaces all as specified.
M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation of post holes filling and mass concrete all as specified and directed.
Dismantling of fencing wire of any description complete all as specified and as directed.
S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to MS nibs, precast RCC fencing post,struds etc., including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured and paid seperately)
M&L for Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required n exc 150 sq cm all as specified.
Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly, including steel box of required module for modular switches/sockets and regulators all as specified complete for the following;- Note : Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.
One light point controlled by one switch.
One ceiling fan point controlled by one switch and regulator
One switch socket outlet 3 pin 5 Amps on same board along with other switches
One switch socket outlet 3 pin 5 Amps on independent board.
All as per item No 57 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board and industrial socket complete all as specified and as directed.
S&F Switch piano flush type, single pole,5 Amps, 240 volts complete all specified.
S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all specified.
S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all specified.
S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40-63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.
Supply and fix Surface and wall mounted LED tube light fitting 20W, batten type (4 feet), extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply including taking down old fittings complete all as specified.
Supply and fix Decorative ECO bulkhead luminaire capacity 10W, extruded aluminium housing with polycarbonate diffuser ,environmental friendly ultra modern energy saving surface mounted, LED luminaire comprising of high brightness and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified.
S&F LED building security light fitting 25W made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexble copper wire including provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to Bldg etc complete all as specified and as directed.
S&F MCB DB SPN 8 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and as directed.
Material and labour for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire all as specified and directed.
Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed.
Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding. 1.5m above the starting point complete all as specified and all as specified.
Supply and laying of common burnt clay building bricks, sub class B of size 230x115x75mm for cable protection all as specified and as directed.
Laying in trenches fine sieved excavated dry soil including spreading, levelling, punning for cushioning of cable all as specified and as directed.
Supply & Lay cable XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor extruded PVC Type ST2 Outer sheathed, 650/1100V as per IS 7098(part-I) of size 2 core 16 sqmm complets all as specified and as directed. Note :- i) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. ii) Earth work such excavation, refilling, etc. shall be measured separately under relevant items.
Supply & laying of GI pipe light grade including necessary fittings of 25 mm bore including taking down the old unserviceable tubing all as specified and as directed .
YOGAA MANPOWER AGENCY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .