Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 CrAdmitted-Finance STREET NO 11 SECTOR NO 04 TILAK NAGAR SAGAR ROAD BIKANER RAJASTHAN 334001 | BIKANER | RAJASTHAN | 334001 | ₹21.5 Cr | L1 | Admitted-Finance |
| 2 | L2₹21.8 CrAdmitted-Finance | ₹21.8 Cr | L2 | Admitted-Finance |
| 3 | L3₹22.3 CrAdmitted-Finance | ₹22.3 Cr | L3 | Admitted-Finance |
| 4 | L4₹22.9 CrAdmitted-Finance | ₹22.9 Cr | L4 | Admitted-Finance |
| 5 | L5₹23.0 CrAdmitted-Finance JODHPUR ROAD UTARLAI BARMER RAJ 344035 | BARMER | RAJASTHAN | 344035 | ₹23.0 Cr | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | MANGLA AMIT BUILDERS PVT LTD L4 | Dasmesh Buildcon L2 | FRIZO INDIA PVT LTD L1 | SOOD ASSOCIATES PVT LTD L6 | DHARIWAL TRADERS PRIVATE LIMITED L3 | M/s godara infratech and power industries L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27 | 1 | LUMP SUM | 18,00,00,000 ₹18 Cr | 16,90,00,000 ₹16.9 Cr | 15,73,83,415 ₹15.7 Cr | 19,13,78,256.9 ₹19.1 Cr | 17,41,77,777 ₹17.4 Cr | 18,67,59,000 ₹18.7 Cr |
| 2.00 | Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 30 | 1 | LUMP SUM | 20,00,000 ₹20 L | 20,90,000 ₹20.9 L | 35,00,000 ₹35 L | 24,22,721.13 ₹24.2 L | 21,15,074 ₹21.2 L | 18,00,000 ₹18 L |
| 3.00 | Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 31 | 1 | LUMP SUM | 9,50,000 ₹9.5 L | 9,50,000 ₹9.5 L | 9,00,000 ₹9 L | 8,44,609.06 ₹8.4 L | 8,68,289.68 ₹8.7 L | 7,29,000 ₹7.3 L |
| 4.00 | Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 36 | 1 | LUMP SUM | 63,00,000 ₹63 L | 60,00,000 ₹60 L | 75,00,000 ₹75 L | 57,93,999.42 ₹57.9 L | 79,36,985.5 ₹79.4 L | 55,97,000 ₹56.0 L |
| 5.00 | Lump sum price worked out by the contractor for "ROAD, PATH & CULVERT" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39 | 1 | LUMP SUM | 45,00,000 ₹45 L | 38,00,000 ₹38 L | 51,00,000 ₹51 L | 45,68,923.11 ₹45.7 L | 36,84,615.41 ₹36.8 L | 34,25,000 ₹34.3 L |
| 6.00 | Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42 | 1 | LUMP SUM | 17,00,000 ₹17 L | 18,00,000 ₹18 L | 18,00,000 ₹18 L | 16,17,009.51 ₹16.2 L | 13,04,039.92 ₹13.0 L | 12,08,000 ₹12.1 L |
| 7.00 | Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 43 | 1 | LUMP SUM | 9,00,000 ₹9 L | 7,00,000 ₹7 L | 11,00,000 ₹11 L | 8,64,785.53 ₹8.6 L | 6,97,407.68 ₹7.0 L | 7,29,000 ₹7.3 L |
| 8.00 | Lump sum price worked out by the contractor for "CHAIN LINK FENCING & COMPOUND WALL" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 46 | 1 | LUMP SUM | 15,00,000 ₹15 L | 16,50,000 ₹16.5 L | 18,00,000 ₹18 L | 14,22,951.82 ₹14.2 L | 15,30,055.72 ₹15.3 L | 13,73,000 ₹13.7 L |
| 9.00 | Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 47 | 1 | LUMP SUM | 9,00,000 ₹9 L | 8,50,000 ₹8.5 L | 8,50,000 ₹8.5 L | 9,96,709.71 ₹10.0 L | 6,98,331.64 ₹7.0 L | 7,43,000 ₹7.4 L |
| 10.00 | Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 51 | 1 | LUMP SUM | 77,00,000 ₹77 L | 79,30,565 ₹79.3 L | 80,00,000 ₹80 L | 70,06,369.84 ₹70.1 L | 75,33,731.01 ₹75.3 L | 71,00,000 ₹71 L |
Tender Value
₹16.9 Cr
EMD Value
₹11.7 L
Closing Date
11 Feb 2023, 6:00 pmClosed
Chief Engineer Jodhpur Zone
HQ Chief Engineer Jodhpur Zone
PROVN OF OFFRS JCOS ORS DEFI MD ACCN AT JASSAI MIL STN
2022_MES_514717_2
800552/JASAI/2021-22/E8
Open Tender
Civil Works
750 days
Barmer
Please refer tender documents
9 documents required · 9 mandatory
₹3,000
GE (A) Barmer
₹11.7 L
Yes
15 Feb 2023
6 Dec 2022
13 Feb 2023
6 Dec 2022
11 Feb 2023
27 Jan 2023
Amount
Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27
Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 30
Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 31
Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 36
Lump sum price worked out by the contractor for "ROAD, PATH & CULVERT" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39
Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42
Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 43
Lump sum price worked out by the contractor for "CHAIN LINK FENCING & COMPOUND WALL" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 46
Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 47
Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 51
Lump sum price worked out by the contractor for "DEMOLITION" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 52
Lump sum price worked out by the contractor for "ARBORICULTURE" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 53
Sch 'A' PART-XIII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.
INTERNAL WATER SUPPLY (OFFICERS QTR) S&F 15 mm bore, fancy type, CP brass bib cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar QUEEN SERIES Cat No QQT-7037 or technocommercial equivalent of any make specified in Appx 'C'.
S&F 15 mm bore, fancy type, CP brass angular stop cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar QUEEN SERIES Cat No QQT-7053 or technocommercial equivalent makes as per Appx 'C'.
S&F of CP wall mixer 3 in 1 system including 1.5 m long tele shower and overhead shower of size 150x150 mm with wall flange ISI marked complete all as specified and directed. Make - Jaquar QUEEN SERIES Cat No 7281 or technocommercial equivalent of any make specified in Appx 'C'.
S&F overhead shower 150x150 mm of ABS body crome plated with grey face plate with arm having swivel joint chromium plated complete all as specified and directed. Make - Jaquar QUEEN SERIES Cat No 35495 or technocommercial equivalent makes as per Appx 'C'.
S&F 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout complete all as specified and directed. Make - Jaquar QUEEN SERIES Cat No QQT-7309 or technocommercial equivalent makes as per Appx 'C'.
S&F health foucet with 1200 mm long flexible mild steel tube 80 mm dia with wall hook complete all as specified and directed. Make - Jaquar QUEEN SERIES Cat No ALD-573 or technocommercial equivalent of any make specified in Appx 'C'.
S&F two way angle cock chromium plated fancy type 15 mm bore complete all as specified and directed. Make - Jaquar QUEEN SERIES or technocommercial equivalent of any make specified in Appx 'C'.
S&F two way pillar tap chromium plated fancy type 15 mm bore complete all as specified and directed. Make - Jaquar QUEEN SERIES or technocommercial equivalent of any make specified in Appx 'C'.
INTERNAL WATER SUPPLY (JCO's / OR's QTR) S&F 15 mm bore, fancy type, CP brass bib cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.
S&F 15 mm bore, fancy type, CP brass angular stop cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.
S&F of CP wall mixer 2 in 1 system with central spout and connection for overhead shower with divertor lever ISI marked complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.
S&F overhead shower 100 mm dia of ABS body crome plated with grey face plate with arm having swivel joint chromium plated complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.
S&F 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.
S&F two way angle cock chromium plated fancy type 15 mm bore complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.
S&F two way pillar tap chromium plated fancy type 15 mm bore complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.
INTERNAL ELECTRIFICATION S&F TV sockets complete with all accessories all as specified and as directed.
S&F RJ 11 Gang with shutter (Telephone Jack) complete with all accessories complete all as specified and directed.
S&F load line distribution board TPN vertical, 4 way double door type, fixed on wall semi flush with incoming MCCB 4 poles 125 Amps, 16 KA, busbars , neutral link, blanking plates complete with all accessories all as specified and as directed. Note:- Outgoing MCBs shall be measured and paid separately.
M&L for sub main wiring with four runs of 10.0 Sqmm size main cable and one run of 10.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified and as directed.
S&F PVC metal braided connection pipes for hot water supply with brass adopters 15 mm dia and 450mm long complete all as specified and as directed.
S&F LED batten suitble for indoor application 20 W, 4' length, wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge. Make:- Havells Cat part No LH EXACP7IN1W 020 or technocommercial equivalent makes as per Appx "C".
S&F decorative, wall mounting, brushed nickel finish fixture with opal glass diffuser suitable with 9 W LED lamp B22 base including all electrical connections complete all as specified and as directed
S&F LED lamp B22 base 10 W, min lumen output 950 lumens at 6500 K CCT for batten holders complete all as specified and as directed.
S&F LED batten suitble for indoor application 10 W, 2' length, wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
M&L for inverter point wiring for one light, ceiling fan and 5 Amp socket for each room with 2.5 sqmm,PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS), 1100 volts grade including 2.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories upto the main DB and 15 A switch socket combination with gang box flushed in wall for inverter power supply complete all as specified and as directed.
S&F LED security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 4KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT5500-6500 CRI greater than 70 , input power 30W output operating voltage 140-280V with connection by three core PVC insulated multistranded copper conductor sheathed cable of size 1.0 sq mm fixed with & including bracket made of GI pipe 40mm bore light grade, 1.6 mtr long bent to shape required with 2 no MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed. MAKE:- Crompton CAT PART No LST-25-CDL-M or technocommercial equivalent makes as per Appx "C".
Note for item No 39.00: (1) The LED lights shall have guarantee for 5 Years from date of completion of contract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.
M&L for drawing 12 pair /multi core coated copper telephone cable including PVC conduit of size 20 mm complete all as specified & directed.
M&L for earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.5 m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.
Supply, Install, testing & commissioning of microprocessor based single phase single source tamper proof electronic smart prepaid energy meter with provision of conversion into postpaid at the time of emergency, accuracy class 1.0 surface mount type and of rating 415 volts, 50 hz of range 10-60 Amps condirming to IS 16444 (2015) with LED display and parameters like Voltage, Current, Frequency, power, Power factor, KWh/KVA, default inbuilt single source, inbulit long range RF communication suitable for outdoor, suitable range data accumulator and also compatible for prepaid online energy monitoring / billing system through remote software / data export to ERP complete all as specified and directed.
Supply, Install, testing & commissioning of microprocessor based three phase single source tamper proof electronic smart prepaid energy meter with provision of conversion into postpaid at the time of emergency, accuracy class 1.0 surface mount type and of rating 415 volts, 50 hz of range 10-60 Amps condirming to IS 16444 (2015) with LED display and parameters like Voltage, Current, Frequency, power, Power factor, KWh/KVA, default inbuilt single source, inbulit long range RF communication suitable for outdoor, suitable range data accumulator and also compatible for prepaid online energy monitoring / billing system through remote software / data export to ERP complete all as specified and directed.
ROAD, PATH & CULVERT M & L 150 mm thick (compacted thickness) WMM in two layers each of 75 mm thick (each layer to be rolled and consolidated separately) confirming to the grading given in table 400-13 & physical requirement given in table 400-12 spread by mechnically means & rolled by using 8-10 ton vibrator power rolled over compacted surface of soling as specified in clause 406.3.5 of MORT&H specification complete all as specified and directed.
SEWAGE DISPOSAL M&L for construction of RCC Septic tank 100 users capacity designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-35 (Design mix) in walls, base slab, baffle walls and roof slab including beams etc. with manhole openings with cover, connection etc complete all as specified and shown on Drg No CEJZ/STR/25-G/2021 sheet 1R/2 to 2R/2.
M&L for soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of 3.6 x 3.00 effective depth complete all as specified and shown on Drg No CEJZ/STR/STD/14/2016 sheet 1/1.
EXTERNAL WATER SUPPLY Supply, laying, connecting, jointing and testing ductile iron pressure pipe of size 150 mm dia, ISI marked to IS-8329-2000 Reaffirmed Edition 4.1 suitable for "push on joints" in standard working lengths supplied with rubber gasket duly ISI marked for water supply, Class K-9 with socket and with cement mortar linng inside the metalic zinc coating with finishing layer of bituminious paint on outside the pipe without polythelene sleeves but including "push on joints" supplied with ISI marked EPDM rubber gasket conforming to IS-5382-1985 (Reaffirmed-2003) with dual hardness of type 2 (bulb) and type-5 (Heel) quality laid in tenches complete all as specified & directed.
All as per Item No. 47.00 here in before but 100 mm dia complete all as specified & directed
All as per Item No. 47.00 here in before but 80 mm dia complete all as specified & directed
Supplying, fixing and testing of DI pipe fittings for spigot socketed pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing/ decreasing or double socket etc). Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs, for pipe complete all as specified & directed.
Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.0 with flanged ends drilled suitable for bore of pipe 150 mm ISI marked (IS:14846:2000) having S.S spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed.
All as per Item No. 51.00 here in before but 100 mm dia complete all as specified & directed
All as per Item No. 51.00 here in before but 80 mm dia complete all as specified & directed
S&F Cast Iron Air Valves with two air Outlets, 50 mm dia and fixing up in CI/DI water supply mains of 150 mm dia bore complete all as specified and directed.
M&L for Construction of Brick Masonary valve pit of size 90 X 90 X 90 cm (Internal dimenssions) with one brick thick wall in cement mortar 1:4 on 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded broken stone aggregate) as in foundation lean concrete, including PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in benching and coping and 10 mm thick cement plaster in CM (1:4) internally and externally upto 15 cm below ground level providing valve pit cover 40 x 40 x 6 mm iron angle iron frame all-round fixed by means of 4 nos holdfast 150 mm long made out of flat iron 40x6mm embedded in PCC block (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) of size 230 mm X 200 mm X 100 mm incl provn of hinges welded with angle iron frame and MS cover 3 mm thick sheet,MS handle of suitable length and size welded with MS cover and suitable locking arrangement and applying two coat of synthetic enamel paint over a coat of red oxide primer including necessary excavation and earth work in Soft/Loose soil complete all as shown on drawing and as specified and directed.
All as per Item No. 55.00 here in before but size 60 X 60 X 60 cm (Internal dimenssions) complete as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to and including earth lead of galvanized strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion and excavation and earth work in any type of strata, PCC 1:3:6 type C1 in chamber, precast RCC cover 50 mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4 Kg/Sqm) with cast iron frame, funnel with wire mesh, 20 mm bore GI pipe medium grade watering pipe, lugs, 40 mm bore GI pipe medium grade protection pipe up to 7.5 m. NOTE:- Item includes the cost of earth lead and GI protection pipe up to 7.5 m. GI strip and protection pipe beyond 7.5 m shall be measured and paid for separately.
M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.
S&F, connecting and testing of energy efficient, pressure die cast aluminium housing with heat resistant toughened glass & IP-66 protection, efficacy of 110lm/W or more, secondary optics, 10KV SPD, LED street light luminaries 45 watt, fixed on pole including connecting with junction Box of Pole with suitable size cable complete Make:- Crompton: Cat Part No. LSTP-45-CDL-1 or technocommercial equivalent makes as per Appx "C".
S&F GI pipe bracket for street light fittings made out of 32 mm dia GI pipe light grade 1.5 mtr long bent to required angle / shape with and including necessary clamps, nuts, bolts & washers of suitable size all as directed.
Supply, install, commissioning and testing cubical type LT panel board, outdoor canopy type manufactured by a CPRI approved factory, floor mounted, dust & vermin proof front and rear operated door with necessary locking arrangement made of 50 x 6 mm MS angle iron frame work and CRCA sheet of 3.00 mm thick duly painted with two coats of powder coated paint of approved shade. The panel shall be suitable for 415 Volts, 50 Hz, 3 phase 4 wire system and shall be complete with suitable capacity copper bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles glands including excavation & earth work in any type of strata complete all as specified and directed with the following accessories :- Note:- (i) All MCCBs should be TM type (lcu=lcs=100%) including accessories like spreaders, nut bolts etc. (ii) The design of panels shall be got approved from GE before fabricated.
INCOMING (a) MCCB 4 Pole, 415 Volts, 315/320 Amps, 35/36 KA - 01 No OUTGOING (a) MCCB 4 Pole, 415 Volts, 100 Amps, 25 KA - 05 No (b) MCCB 4 Pole, 415 Volts, 125 Amps, 25 KA - 01 No (c) Indicator lamp (RYB) (set of three) - 01 Set
All as per Item No 61.00 here in before but with followings accessories :-
INCOMING (a) MCCB 4 Pole, 415 Volts, 100 Amps, 25 KA - 01 No OUTGOING (a) MCCB 4 Pole, 415 Volts, 63 Amps, 25 KA - 04 No (b) Digital VAF meter for basic electric system monitoring - 01 No (c) Indicator lamp (RYB) (set of three) - 01 Set
All as per Item No 61.00 here in before but with followings accessories :-
INCOMING (a) MCCB 4 Pole, 415 Volts, 100 Amps, 25 KA - 01 No OUTGOING (a) MCCB 4 Pole, 415 Volts, 63 Amps, 25 KA - 03 No (b) MCB TPN, 415 Volts, 32 Amps - 02 No (c) Digital VAF meter for basic electric system monitoring - 01 No (d) Indicator lamp (RYB) (set of three) - 01 Set (e) Automatic Timer switch suitable for 03 phase 415 Volts 50 Hz with Nature switch - 02 EC SWADEEP infra ray sensor with pre dawn switching off timer - 01 Nos
All as per Item No 61.00 here in before but with followings accessories :-
All as per Item No 61.00 here in before but with followings accessories :-
S&F security light termination box pole junction box of size 250 x 200 x 100 mm, weather proof, along with connector for 3 phases and neutral and one MCB SP - 6 to 32 Amps rating. The Junction Box shall be insulated and made out of polycarbonate with glass fibre reinforced, environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive, IP 65, Pole Mounting type for 6/10/16sq. mm x 2/3.5/4.0 Core cable I/C & O/g including MCB, Cable Glands, clamps nut bolts etc. complete all as specified and directed.
(a) MCCB TP 200 Amps (adjustable type), 25 KA lcu=lcs=100% 01 Nos (b) Power capacitor, 2x25 KVAR, 2X12.5, 1X10 KVAR, 1X5 KVAR, 2X3, 1X2, 2X1 11 stage MPP type heavy duty capacitor bank consisting of suitable NO of switching sequences 3 phase 415 volts suitable for 10% over voltage & 30% over current having losses less than 0.5 W/KVAR with inbuilt discharge resistors (c) Contactors having current limiting resistors suitable for capacitor switching of variable KVAR correction of specification as approved by GE. (d) Microprocessor based intelligent APFC relay for controlling variable correction of KVAR. (e) Indication lamp RYB (LED type) with toggle switch - 03 set (f) Internal wiring of panel with stranded copper cable of suitable size. (g) Push butten for manual switching of capacitor. Note: The Design of panels shall be got approved from GE before fabricated. No of steps anf capacitor branch capacity indicated above are tentative and may vary consistant with manufactures standard range of product.
All as per Item No. 68.00 & 68.01 here in before but 30 KVAR with Power Capacitor 1x10 KVAR, 2X5 KVAR, 2X3 KVAR, 1X2 KVAR, 2X1 KVAR, 8 stages complete all as specified and directed.
S&F cable path indicators, CI of atandard size as per relevant IS specifications with voltage and size of cable indicated duly fixed on MS angle of size 40x40x5 mm and 500mm long, embedded in PCC block (1:3:6) type C2 using 40mm grade stone aggregate of size 300mm x 300mm x 200mm including painting and earth work complete all as specified and directed.
ARBORICULTURE Supply and plantation of NEEM plant with saplings 90 cm to 150 cm high incld excavation of suitable size pit (size of pit shall not less than 45 cm dia & 60 cm deep) to accommodate the roots of plants incld provn of good earth and treating with farm yard manure in the ratio (4:1) fertilizers and pesticides (i.e. Bevation and neem cake BHC 10% linson dust. Thimment or phorate, manures super and vermicompost) and making up the trench area to proper levels, for its growth and maintaining for two years from the certified date of completion of work complete all as specified & directed.
All as per Item No. 71.00 here in before but PILU plant complete all as specified & directed
NOTE for Sl Item No 71.00 & 72.00 :- (i) Height of plant shall be measured from top of follage ( not from the isolated branch/leaf,main stem) to 150mm from top of root. (ii) Water will not be supplied by MES for arboriculture. Contractor has to make his own arrangement for watering to plants and grass. (iii) The rates quoted by the contractor deemed to include watering, maintenance of plants till two years after certified date of completion of work. (iv). During two years after completion if any plant is found dead, or not of satisfactory growth, plants of approved size and shape shall be provided without any extra cost to the state. (v). Supply and application of manure, sweet earth and pesticides, fertilizers, etc up to two years after completion are deemed to be included in the quoted unit rate. (vi) Tenderer to note that 20% cost of quoted amount against these items shall be retained for 2 years after completion. In case of failure by the contractor to maintain the plants as above, the same shall be carried out by the department at his Risk and Cost, and the expenditure shall be deducted from this retained amount or any other dues. (vii) The plants shall be brought at site Six months before the date of completion of the work as per Work order.
S&F tree guards 60 cm dia and 2.0m high, fabricated with 3 No. FI of size 25 x 4 mm and 3 No MS angle 25x25x4 mm welded with MS welded mesh of weight not less than 4 Kg/ sqm with 02 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed
Designing (hydraulically, structurally & aesthetically) providing, constructing, hydraulic testing, commissioing and giving satisfactory trails of STP based on MBBR technology of capacity 75 KLD with primary, secondary and tertiary treatment by system complete all as specified and comprising of following:-
(a) Bar screen chamber - 1 No (b) Oil & grease removal trap - 01 No (c ) Equalization tank - 01 No (d) Raw sewage transfer pumps ( 1 W + 1 S) - 02 Nos (e ) Anoxic System (FMR to Anoxue tank) ( 1 W + 1 S) - 02 Nos (f) Moving bed bio reactor including bio reactor media, air grid, air blower, ( 1 W + 1 S) - 02 Nos and reactor tank. (g) Filter feed tank - 01 No (h) Disinfection at chlorine contact tank - 01 No (j) Filter feed tank - 01 No (k) Multi grade filter - 01 No (l) Activated carbon filter - 01 No (m) Treated water tank - 01 No (n) Sludged holding tank - 01 No (o) Sludge feed pump - ( 1 W + 1 S) - 02 Nos (p) Filter pree - 01 No (q) DWPE dosing stem - 01 No (r) Instrumentation schedule - 01 No (s) Level control switch - 01 No Note:- (i) Supply, installation, testing and commissioning of common control panel and cabling for all E/M equipments in the STP only. (ii) Interconnecting pipe work including valves / NRV etc within battery limit 1 lot. (iii) Contractor will submit complete design / model of package type STP plant based on MBBR technology for approval of Accepting officer before executing the work.
Operation and maintanance of sewage treatment plant by deploying minimum 01 operator 01 shift per day having minimum qualification of Diploma / ITI and shall have minimum 2-3 years of experience including cost of topping up MBBR media, cost of glass wares, cost of consumable (hypochlorite and other chemicals. Lub oils, glands etc) as required except electricity complete all as specified and directed. Note:- Cost of repair / rectification of defaults & cost of spares shall be demmed to be included in quoted cost of item No 74.00, since it pertains to defect liability period (DLP).
Dasmesh Buildcon
DHARIWAL TRADERS PRIVATE LIMITED
MANGLA AMIT BUILDERS PVT LTD
M/s godara infratech and power industries
SOOD ASSOCIATES PVT LTD
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
tenderpages.doc.pdf
Tender Documents • 18.76 MB
BOQ_635623.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid