SPECIAL REPAIR TO FALSE CEILING AND TILING PLASTERING WORK AND ELECTRIC WIRING IN BLDG NO EW 2 EW 3 AND EW 5 OF OTM ACCN AND SPL REP TO BLDG NO EW 1 AND EW 4 OF OTM ACCN OF OTC BARAUNI CAMP UNDER GE DANAPUR CANTT

Amount

Dismantling AC (corrugated, semi corrugated etc), sheet as in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strentth of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

S & F of 6 mm thick asbestos cement corrugated or semi-corrugated sheets fixed with ‘L’ type or ‘J’ type or cranked hook bolts and washers as in roof covering, walls etc. complete all as specified and directed.

S & F of 6 mm thick asbestos cement two-piece adjustable plain wing ridge fixed with coach screws and washers as in roof covering, walls etc. complete all as specified and directed.

Demolition of Brick work or stone/ boulder masonary built in Cement mortar complete all as specified & directed

M & L for brick work with sub class `B' brick (Old size) straight or curved on plan exc 6m mean radius in cement mortar (1:6) complete all as specified & directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded aggregate) including necessary from work complete all as specified & directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam or lintels haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified & directed.

Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises complete all as specified & directed.

M & L 25 mm PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) as in floor etc complete all as spd and directed

M & L for Vitrified Ceramic tiles light shade (square / rectangular) of 10mm thick, area of each tile exceeding 0.36 sqm but not exc. 0.42sqm as in floor etc. over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade (square / rectangular) of 10mm thick, area of each tile exceeding 0.36 sqm but not exc. 0.42sqm as in skirting or vertical surface etc. over and including 10 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for Non skid colour tiles of 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor etc. over and incl 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M&L for glazed ceramics coloured tiles of size 350x450x 7mm thick in vertical surfaces such as on skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over 20mm thick screed base, in CM 1:6 set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over 15 mm thick cement screed bed, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed .

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on old plastered wall surface complete all as specified and directed.

M&L for preparation of newly plastered surface of wall & concrete and applying 3 mm thick wall care putty in cluding preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered wall surfaces including preparation complete all as specified and directed.

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed.

S&F in position false ceilling comprising of grid system of Armstrong or equivalent for frame work with GI powder coated angle wall runners of size 19 mmX19 mm cross Tee of size 24mmX24mm and main tee of size 34mmX24mm at 60 cm c/c approx to form a grid of 600mmX600mm for designer false ceilling suspended form roof on main runners @ 0.90 mm c/c by means of suitable suspender (average 1.50 mtr length) 4 mm GI wire with adjustable cleats of hook including Gypsum ceiling board of sound absorbing of size 60 x 60 cms, 9 mm thick of ARMSTRONG or any other make specified in Particular Specification coloured with perforations complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed

M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed

Ditto--- as per Srl itemNo 34.00 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified & directed.

S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed.

~Ditto~ All as per item No 36.00 above but without glazing bars complete all as specified and directed

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed...

SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F aluminium alloy anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy size 300 mm large complete all as specified and directed.

S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Aluminium handles, cast type, anodized 150 mm size ISI Marked complete all as specified and directed.

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125X60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed.

S & F MS framed work such as grill gratings etc with ends of bars shouldered end / or riveted or forged into spikes, framed guard bars, barred irons, ladders framed, baluster walk ways, railings, framework of water tanks and similar work conforming to FE410 or FE 310-0 including wedding complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. complete all as specified and directed.

M&L machine cut cuddappa stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing mirror and polishing & rounding to edges over & incl 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

S&F in repairs sinks with drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including MS brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.

S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specifiedand directed.

S/F in repair 15mm dia Stop valves, cast copper alloy chromium plated fancy type, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

Supply and fixing in repair 15mm dia pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity including bracket fixed to wall & PVC high density tube 32 mm dia flush pipe complete in repair complete all as specified & directed.

S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges inluding brackets complete complete all as specified & directed.

S&F in repair Soap dish, stainless steel, approximate size 160x160x90mm and approved by EIC complete all as specified & directed

S&F in repair bib tap 15mm, brass chromium plated long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc fancy type complete all as specified and directed.

S & F of 75 mm dia PVC (SWR) Plain floor trap, with grating including jointing with solvent cement complete all as specified and directed.

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F MS clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing end of stays to wall or roof for 110 mm PVC complete all as specified and directed.

S&F PVC (SWR) bend/shoes any radius of 110 mm dia complete all as specified and directed.

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

Supply and laying of 16 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified and directed.

Supply and laying of 20 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified and directed.

S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M & L PCC 1:2:4 type B0 (using 12.50mm graded stone aggregates) as in back filling of pressed steel frames and similar works inclduing necessry form work as required complete all as specified and directed.

Taking up or down steel tubing & connections of pipe 15mm dia complete all as specified & directed

Taking up or down steel tubing & connections of pipe 20mm dia complete all as specified & directed

S & F in repair rotational moulded polyethylene water storage tank (Three layer) of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position all as specified in SSR Pt I complete all as specified & directed.

S&F PTMT ball valve 20 mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete all as specified & directed

S & F in repair 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Cutting chases in brick wall, etc for concealed water tubing ,etc & making good in CM 1:3 , cutting not exc 10 cm girth complete all as specified & directed.

S&F in repair 600mm long PVC connection of size 15 mm with PTMT nuts etc complete all as specified & directed.

S & F for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667 Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Bottom rail of size 100x 44.45x 1.18 mm @ 1.69 Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 6 mm thick Aluminium composite panel (ACP) with glazing clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

M & L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar

Taking down carefully copper / aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's with MCB and making good the disturbed surfaces of walls complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed.

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes 1.6 mm thick with 3 mm thick laminated sheet for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed:-

One light/fan point controlled by one switch complete all as specified & directed

One 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified & directed.

One 5 Amps socket out let point on independent board controlled by one switch complete all as specified & directed.

~Ditto~ all as per Sch A Item No- 89.00 above but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch complete all as specified and directed..

S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 240 Volt grade, ISI marked complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed.

Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 240 volts complete all as specified & directed.

S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed.

Supply & fixing batten / angular fitting complete all as specified and directed.

Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply and fixing double door SPN DB's eight way of powder coated DB's suitable for MCB's fitted with bus bar , neutral link , earth bar and Din ral as per existing finishing completeall as spd and directed.

Supply and fixing MCB SPN 5 to 40 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge.

S&F MCB SP of capacity 5 - 40 Amps 240 volts, 10 KA breaking capacity 'C' type incl connection complete all as specified & directed.

Refixing old serviceable light fittings of any type and description complete all as specified and directed.

S&F LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size including 1 No tube 18/20 Wall as specified. Make- Crompton Greaves, Model No: DMLN1LT8-16 or equivalent model of Bajaj/Surya/ Havells Cat No: REGALBATTENT8UPTO1X22WDSBSWH+CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bajaj/Philips/ CG.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell's Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG/Philips.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor,drawn in and including non metallic rigid PVC conduit medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles etc of size 25 mm external dia in concealed wiring system by cutting of wall and making good disturbed surface of wall as per existing and including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green colour PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and as directed.

S & F in repair for earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 20mm bore upto 7.5m length for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 5 of MES schedule 2009 part-I and connected complete all as specified including testing on completion

jaglalchoudharyandsons

MS SHANTI AND SONS

M/s Naresh Chand Agrawal

HARINANDAN RAI SONS

M/S SHOBHA CONSTRUCTIONS

SINHA CONSTRUCTION

M/s Mukesh and company

SARKAR BUILDERS