Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹11.4 LAccepted-AOC NAMBLABAL PAMPORE DISTRICT PULWAMA JAMMU KASHMIR 192121 | PAMPORE | PULWAMA | JAMMU KASHMIR | 192121 | L-1 | Accepted-AOC Being L-1. | |
| 2 | L-2₹12.4 L+₹2,371.10 (0.19%)Rejected-Finance | L-2 | Rejected-Finance Not being L-1. | |
| 3 | L-3₹15.3 L+₹2.9 L (23.2%)Rejected-Finance C O S 1 ESS GEE COMPLEX NEAR J K BANK SONAWAR BAZAR B B CANTT SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L-3 | Rejected-Finance Not being L-1. | |
| 4 | L-4₹16.9 L+₹4.5 L (36.6%)Rejected-Finance 15 BAGHE ISLAM NEAR NH BY PASS BRIDGE LAL NAGAR CHANAPORA SRINAGAR JAMMU KASHMIR 190015 | SRINAGAR | JAMMU AND KASHMIR | 190015 | L-4 | Rejected-Finance Not being L-1. |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
21 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
REPAIR AND MAINT OF EXTERNAL ELECTRIC LT DISTRIBUTION SYSTEM AT KHREUH AND SHER-E-SHALI UNDER GE 861 EWS
2024_MES_675579_1
GE 861 EWS-57/2024-25
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE 861 EWS
As per Tender Documents
7 documents required · 7 mandatory
₹500
Yes
GE 861 EWS
₹38,000
Yes
27 Nov 2024
20 Sept 2024
28 Oct 2024
20 Sept 2024
21 Oct 2024
7 Oct 2024
Amount
Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.
Excavation in trenches beyond 1.5 m wide and n.exc. 3 m deep for foundation of poles/stay etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard and dense soil.
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.
M&L for sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed by Engr-in-Charge. Note: The compacted thickness of 18cm shall be measured and paid for after consolidation of sand.
M&L for bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified and directed by Engr-in-Charge.
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in foundation filling, coping and mass concrete complete all as specified and directed by Engr-in-Charge.
Supply and fixing steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31 ( 9 Mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminium paint over a coat of red oxide primer on rest part of pole and its connected parts complete all as specified laying GI pipe light grade for cable protection and fixing to existing pole with flat iron clamp 25x3mm including nuts bolts and washers etc complete of 40mm dia including taking out old unserviceable pole complete all as specified and directed by Engr-in-Charge.
S&F Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanised MS spindle, two galvanized iron washer, GI nut of size 100 mm height and 65mm dia 1100 volts grade including dismantling of old unserviceable complete all as specified and directed by Engr-in-Charge. Make: Jaipuria/Pactil/Masore Porcelain
S&F Shackle type insulators, porcelain, vitreous white/ brown or green including galvanised MS strips, bolt, nuts and washer of size 75mm height and 90mm dia, size of strap section 31x3mm and dia of 12 mm for working pressure 1100 volts grade including dismantling of old unserviceable complete all as specified and directed by Engr-in-Charge.
M&L for Cross arms, bracings, supports, clamps and back plate fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as indicated or directed and includingusive of one primer coat, and one under coat and one finished coat of aluminium paint including dismantling of old unserviceable complete all as specified and directed by Engr-in-Charge.
M&L for aluminium conductors, reinforced (ACSR) conductor of any size for OH lines including stretching, binding wire, jumpers, line taps etc including dismantling of old unserviceable complete all as specified and directed by Engr-in-Charge.
Restretching/tightening only the ACSR conductor fixed on over head line pole and tightening the ACSR conductor, taking down the conductor from insulators complete with authourised sag and rewinding with insulators in proper position after tightening with new aluminium winding wire of dia 2mm complete all as specified and directed by Engr-in-Charge.
M&L for stay assembly complete with accessories as shown in electric plate No. 1 and including loop type insulator white brown or green with over all dimensions 65x90mm, clearance of hole 16mm complete all as specified and directed by Engr-in-Charge.
M&L MCCB 4 pole, 415 volts adjustable thermal settings, 63 Amps with breaking capacity 16 KA complete all as specified and directed by Engr-in-Charge.
M&L MCCB 4 pole, 415 volts adjustable thermal setting 100 Amps with breaking capacity 25 KA complete all as specified and directed by Engr-in-Charge.
M&L for MCCB 4 Pole, 415 V, Adjustable type, 160Amps with breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge.
M&L for MCCB 4 Pole, 415 V, Adjustable type, 200Amps with breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge.
M&L for MCCB 4 Pole, 415 V, Adjustable type, 250Amps with breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge.
M&L for MCCB 4 Pole, 415 V, Adjustable type, 400Amps with breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge.
M&L for Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 63 Amps with side handle complete including taking down old one complete all as specified and directed by Engr-in-Charge.
M&L for Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100 Amps with side handle complete including taking down old one complete all as specified and directed by Engr-in-Charge
M&L for Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 200 Amps with side handle complete including taking down old one complete all as specified and directed by Engr-in-Charge
M&L for Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 400 Amps with side handle complete including taking down old one complete all as specified and directed by Engr-in-Charge.
S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm nominal cross section 4.0 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers complete all as specified and directed by Engr-in-Charge. Note- Earth work and protection work shall be measured and paid separately.
Description all as per item No. 26 above but cross sectional area 25 Sqmm 4.0 core complete all as specified and directed.
Description all as per item No. 26 above but cross sectional area 35 Sqmm 3.5 core complete all as specified and directed.
Description all as per item No. 26 above but cross sectional area 50 Sqmm 3.5 core complete all as specified and directed.
Description all as per item No. 26 above but cross sectional area 95 Sqmm 3.5 core complete all as specified and directed.
Taking out from trenches/poles/wall etc LT UG Cable PVC insulated sheathed with multistranded aluminium conductor armoured and relaying after fault rectification duly tested in trenches/Poles/Wall of LT UG Cable of any sizes including Earth work complete all as specified and directed by Engr-in-Charge
M&L for cable end termination heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 16 Sqmm to 50 Sqmm 3.5/4 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by Engr-in-Charge
M&L cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 95 Sqmm to 120 Sqmm 3.5 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by Engr-in-Charge
M&L for painting of steel tubular electrical poles cross arms channels etc after scrapping the old patchy cracked painted applying one coat of aluminium paint to complete pole,clamps,channel ,cross arms and block strip of 30cm to 1.5 mtr height on the same complete all as specified. And preparation of surfaces by connector will taken the power shut down on the feeder before commencement of painting work electric poles complete all as specified and directed by Engr-in-Charge
M&L for painting of PCC poles with bracket/fitting etc complete by scrubbing old deteriorated paint preparing the surfaces ,applying two coats of cement base paint including colour strip of two coats of synthetic enamel paint upto 1.5 mtr height, writing pole no. is black base complete all as specified and directed by Engr-in-Charge
Trimming of trees branches from electric over head lines and clearing of 2 meter distance horizontal and vertical from outer edge of conductor including removing cut branches 50 Mtr (minimum) away from the place all complete all as specified and directed by Engr-in-Charge Note: Contractor will ensure shut down on the feeder in writing before commencement of work on electrical lines.
Supply and laying GI tubing light grade with all fitting laid in trenches or fixed on wall along pole complete for protection of electric cable/strip complete all as specified and directed by Engr-in-Charge. (a) 80mm dia light grade GI tubing
(b) 50mm dia light grade GI tubing
(c) 40mm dia light grade GI tubing
M&L for making bore to road/cement path/hard standing for provision of GI pipe 40 to 80 mm light grade for passing armoured cable including making good the disturbed surface complete all as specified and directed by Engr-in-Charge.
Supply in replacement of voltmeter 0-500 volts digital type including taking down old existing unserviceable complete all as specified and directed by Engr-in-Charge
Supply in replacement of Ammeter 0-400Amps digital type including taking down old existing unserviceable complete all as specified and directed by Engr-in-Charge
S&F in repair CTs for amper meter including taking down the existing old CTs complete all as specified and directed by Engr-in-Charge
Supply and fix Bus Bar Chamber of size 60 x 60 x45 cm suitable of 3 phase 433 Volts outdoor type made out of 3.15 mm thick M S Sheet with 200 Amps rated aluminium busbar (4 Nos ) PVC sleeves and coloured (Red, Yellow, Blue and Black) with locking arrangements and angle iron stand of size 40 x 40 x 6mm frame grouted in ground with PCC foundation 1:2:4 type C1 with 20mm graded stone aggregate alongwith all necessary cable connections, lugs and cable gland including 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Supply & fix in replacement cable PVC insulated flexible copper conductor cable of size 1.5 Sqmm 3 core cut to pieces all as required, drawn into conduit/pipe fixed to wall or pole complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 1100 volts grade heavy duty cable PVC insulated copper conductor (Solid ) of size 16 Sqmm single core served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified by the Engineer in charge.
Supply and fixing 1100 volts grade heavy duty cable PVC insulated copper conductor (Solid ) of size 25 Sqmm single core served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed by the Engineer in charge.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections of nominal cross section 16 Sqmm 2 Core including removing the old unserviceable service cable complete all as specified and directed by the Engineer in charge.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections of nominal cross section 10 Sqmm 2 Core including removing the old unserviceable service cable complete all as specified and directed by the Engineer in charge.
S&F aluminium thimbles 1100 volts suitable for 70 Sqmm to 150 Sqmm cable complete all as specified and directed by the Engineer in charge.
S&F aluminium thimbles 1100 volts suitable for 25 Sqmm to 50 Sqmm cable complete all as specified and directed by the Engineer in charge.
S&F aluminium thimbles 1100 volts suitable for 6 Sqmm to 16 Sqmm cable complete all as specified and directed by the Engineer in charge.
S&F smooth finish highly durable ruggedness copper, Copper thimbles 1100 volts suitable for 70 Sqmm to 150 Sqmm cable complete all as specified and directed by the Engineer in charge.
S&F smooth finish highly durable ruggedness copper, copper thimbles 1100 volts suitable for 25 Sqmm to 50 Sqmm cable complete all as specified and directed by the Engineer in charge.
S&F smooth finish highly durable ruggedness copper, Copper thimbles 1100 volts suitable for 6 Sqmm to 16 Sqmm cable complete all as specified and directed by the Engineer in charge.
Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick busied directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6 mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and including testing on completion. (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shall deem to be includinguded in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item of Sch A part-IV (Sec-I) . (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department .
M/S Hilal Builders (BID ID -3138382)
M/S A.N CONSTRUCTIONs (BID ID -3139702)
M/S Manzoor and Co (BID ID -3144266)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .