GE CHD T 07 2025 26 SPECIAL REPAIRS TO SECURITY FENCING AT K AREA UNDER GE CHANDIGARH

Amount

Dismantling posts or struts embedded in concrete, brick work, masonry, etc. (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground etc including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge.

Dismantling of fencing wire mesh,expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any complete including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge.

Dismantling of Trellis work (Jafri)/fibre sheeting/fencing work in walls, including taking as under of battens in trellis (posts and rails measured separately) complete including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) in soft/loose each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm out complete all as specified.

Plain cement concrete (1:2:4) type B-1,using 20 mm graded stone aggregate as in foundations, filling and mass concrete, sub base etc complete all as specified and directed by Engineer-in-Charge.

Supply only Chain link MS galvanisd fencing, of wire size 3.16 mm dia with mesh zize 80 mm x 80 mm (pitch of wire ) complete all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, of wire zize 3.16 mm dia with mesh size 80 mm x 80 mm (pitch of wire ) , any type of standards, rails, straining bolts, etc. including provission of binding wire complete, all as specified and directed by Engineer-in-Charge.

Steel work in tubularsection including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge.

Mild Steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as as specified and directed by Engineer-in-Charge.

Mild steel round bars 10mm dia and over, cut to length, bent to shape required with screwed ends,nuts,washers and mild steel plates etc conforming to Fe-290 (Gde E-165) complete all as as specified and directed by Engineer-in-Charge.

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete, all as specified and directed by Engineer-in-Charge.

Preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Fibre glass reinforced translucent plain steel sheet 2.0 mm thick of any colour as in roof covering/cladding to wall, fixed with coach screws and washer etc complete all as specified and as directed by Engr-in-charge.

Note: For the purpose of arriving at lumpsum amount, the amount of credit schedule i.e Sch 'A' section II (i.e Rs 69200.00 shall be deducted from the total amount arrived.

Total of Schedule 'A' Rs.

M/s Super Trading Corporation (BID ID -3313330)

m/s AR Construction co (BID ID -3312464)