Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC 224 OFFICERS ENCLAVE BEHIND PLV MEMORIAL COLLAGE SHIKARGARH ARMY AREA JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC being lowest | |
| 2 | L2₹23.9 L+₹2.0 L (9.13%)Rejected-Finance V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹27.0 L+₹5.0 L (23.0%)Rejected-Finance | L3 | Rejected-Finance Other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
15 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Utarlai
GE (AF) Utarlai PB No. 11 Barmer 344001
REPAIR TO CERTAIN BLDGS IN SAROJ COLONY IN DOMESTIC AERA AT AF STN UTARLAI
2022_MES_546176_1
8319/E8
Open Tender
Civil Works
Item Rate
180 days
Utarlai
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Utarlai
₹40,000
Yes
15 Dec 2022
18 Aug 2022
22 Sept 2022
19 Aug 2022
15 Sept 2022
1 Sept 2022
Amount
Demolition stone slabs (granite) of any description or thickness in floors,apron etc laid, bedded and pointed in any mortar complete all as specified and directed.
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like with bedded in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specifed and directed by Engineer-In-charge..
M&L for rounding to the edges of granite stone slabs complete all as specified and directed.
Dismantling 100 mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings and taking out including removing from site complete all as directed by Engr In Charge.
Dismantling 75 mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings and taking out including removing from site complete all as directed by Engr In Charge.
S&F 75 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls as specified & as directed.
S&F100 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to wall as specified & as directed.
S&F in repairs cast iron floor trap, 75 mm dia of outlet, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4).
All as per item No. 8 above but 100mm dia of outlet for WC's without grating complete all as specified and directed.
S&F in repairs 100 mm bore CI connection socket/TEE to fit out let of WC bore
S&F in repairs 75 mm bore CI bends/elbo with oval access door etc
Taking up or down steel tubing 15 mm bore including connections and including cleaning for refixing complete all as specified and directed.
Taking up or down steel tubing 20 mm bore including connections and cleaning for refixing complete all as specified and directed.
Taking up or down steel tubing 25 or 32 mm bore including connections and including for refixing or complete all as specified and directed.
Relaying/refixing of old steel tubing 15 mm bore including connections in new or old position including, necessary cutting, threading with necessary fittings like tees, elbows, sockets, reducers, bends etc compete all as specified and directed.
All as per item No 15 above but 20 mm bore
All as per item No 15 above but 25/32 mm bore
S&F for galvanised steel tubing 15 mm bore (ISI) marked "medium grade" with necessary fittings like tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls etc including taking down old tubing complete all as specified and directed
All as per item No 18 above but 20 mm bore
All as per item No 18 above but 25 mm bore
M&L for cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.
M &L for Glazed ceramic coloured tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match shade of tiles and laid over including 10 mm thick bedding layer in CM 1:4 complete all as specified.
M &L for Glazed ceramic coloured tiles in vertical surface 200 X 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match shade of tiles and laid over including 10 mm thick back layer in CM 1:4 complete all as specified.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, laid over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match shade of tiles complete all as specified.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but nexc 0.11 sqm in floors, laid over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match shade of tiles complete all as specified.
Material & Labour for vitrified ceramic "light shade" coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed
S&F in repairs Vitreous china water closet (Sqatting Pattern) "Orissa Pattern" size 580x440mm "white" with CI 'P' or 'S' trap front or back inlet and integral foots rest any pattern including connecting pipe of CI at suitable bore and length and incl re-fixing old Cistern, flush pipe etc if required but excluding supply of flushing cistern and flush pipe complete.
S&F in repairs vitreous china wash down water closet pedestal pattern (EWC) incl necessary fixing arrangements and incl re-fixing old Cistern, flush pipe etc if, required but excluding supply of flushing cistern and flush pipe complete.
S&F in repairs plastic sheet covers for water closet, black,closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device.
S & F in repair Flush pipe of polyethylene of high density or PVC. 32 mm dia, for low level/ high level cistern for IWC, EWC and anlo-Indian water closet complete all specified
S&F in repairs 10 Ltrs PVC valveless, syphonic action type, flushing cistern low level, white, with inlet including bracket and 32mm flush pipe of polythylene of low or high completeall as specified and directed. (including dismantlling of half turn valve 32 mm of any description , if required)
Taking down chowkhats with shutters n.exc 1.5 sqm each with shutter (without taking off shutters from the frames).
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening.
Repairing, resecuring, easing, adjusting shutters of any description exc 1 sqm but not exc 2 Sqm each without taking down inclduing necessary repairing old iron mongry, if required compete all as specified and directed.
S & F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated.
S&F 2nd class HW 35mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars), edges of framing, Plain,chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specfied
S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S & F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tackes or galvanised wire staples complete all as specified
S&F factory made 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified.
S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6 and 2 coats of oil bound distamper on new surface over primer complete as specified and directed
S&F factory made solid panel shutter (PVC) 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications.
S&F 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in kitchen cupbords, modular kitchen drawer and almirah shutters or other placed as specified and directed by Engr-in-charge.
S&F 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in kitchen cupbords, modular kitchen drawer and almirah shutters or other placed as specified and directed by Engr-in-charge.
Dismantling boarding, any description, fixed in any position with nails
S & F 100 mm size Aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S & F 75mm size mild steel butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed.
S&F extruded aluminium alloy handles fabricated types, anodised, each 150 mm long complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.
S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length and 12mm dia with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections
S&F in repairs 150mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S & F in repairs Aluminium anodised hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and with screws100 mm size complete all as specified and directed
S&F sheet glass 3mm thick ordinary quality & glazing with oil putty in square/ rectangular n.exc 0.5 Sqm in each pane
S&F sheet glass 3mm thick ground or obscured or frosted or pin headed type , on one side & glazing with oil putty in square/ rectangular n.exc 0.5 Sqm in each pane
Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazingt pin/springs clips all as specified and directed by Engr-in-Charge
M&L for 25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
M&L for 20-25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished
S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm.
M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specifified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories)
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.
S&F 110mm bore PVC(SWR) bends any radius complete all as specified and directed.
Dismantaling of water tanks capacity exc 250 ltr & n.exc 500 ltr complete all as specified.
S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured two layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of lod water tank complete all as per specified and directed.
S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm bore iron pipe and fixed. (Minimum weight 20mm - 2 1 0 gms )
S & F in repairs 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 25mm bore iron pipe and fixed. (Minimum weight 25mm-455gms)
S&F in repairs 15 mm bore bib tap cast copper alloy, Chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed.
S&L in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
S&L in repair 15mm bore fancy type long shank/ nose Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
S&F in repairs Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets & 32mm bore waste coupling of chromium plated, waste pipe etc complete all as specifed and directed.
S & F in repairs for 50mm nominal bore High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm including necessary bends/elbo etc complete all as specified
S&F in repairs 15mm bore stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm bore iron pipe complete all as specified and directed.
S&F in repairs 15mm bore brass chromium plated (fancy type) stop valve / angle valve , with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm bore iron pipe all as directed.
S&F in repairs 15mm bore gun metal globe or gate valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs 20mm bore gun metal globe or gate valve with iron wheel screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs 25mm bore gun metal globe or gate valve with iron wheel screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs grating dome 125 mm dia of stainless steel with or without hole complete all as specified
S&F in repairs 15mm bore grating dome 50 mm dia of stainless steel with or without hole complete all as specified.
S & F in repair 15mm bore Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms)
S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.
S&F in repairs 32 mm outlet dia waste fittings, brass, chromium plated for wash hand basin /stainless steel sink, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed to waste pipe complete all as specified and directed.
S&F in repairs 32 mm dia PVC flexible pipe fixed as waste pipe for WHB/ kitchen sink/ urinals including (as per existing size) connecting to waste coupling with PVC couplers, elbow etc. complete all as spcified and directed.
S&F in repair 600mm long PVC Connection fixing to 15mm dia iron pipe complete
S&F in repair 450 mm long PVC Connection fixing to 15mm dia iron pipe complete
S&F in repair sink with drainage board made of stainless sink steel 1mm thick kitchen with plugs, washers and waste pipe , waste coupling, cantilevers brackets, connecting union overall size 915x460mm bowl size 410x330x160mm complete all as specified and directed.
S&F in repair sink without drainage board made of stainless sink steel 1mm thick kitchen with plugs, washers and waste pipe , waste coupling, cantilevers brackets, connecting union overall size 495mm x 420mm bowl size 410x330x160mm complete all as specified and directed.
S&F in repair Mild Steel cantilever brackets for stainless steel sink / wash hand basin including embeded in wall by drilling and making good with cement mortar/ PCC 1:2:4 type B1 complete all as specified and directed.
S&F in repairs Chromium plated shower rose 100 mm dia with 125mm long CP arms, with or without swivel joints, including fixing complete to steel pipe or union complete all as specified and directed.
S&F in repairs 15mm bore CP Health faucet of standared quality and make with high density chromium plated flexible pipe of minimum length 1.50 mtr complete all as specified and directed.
S&F in repair 15mm bore two way chromium plated angle cock cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule,long body complete all as specified and directed.
S&F in repairs PVC cover (lid) for PVC water tank suitable for 500 & 1000 ltr capacity water tanks complete complete all as specified and directed.
M&L PCC 1:3:6 Type C-1 using 20 mm graded coarse aggregate as in platform below PVC tanks or other place where required all as specified and as directed
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.
M&L for rendering 15 mm thick on fair faces of brick work/ concrete surfaces in CM(1:4) finished even and smooth without using extra cement complete all as specified.
M&L for rendering 15mm thick on fair faces of concrete surfaces in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by engr-in-charge.
M&L for rendering 10mm thick on fair faces of concrete surfaces, stone masonry or brickwork in cement mortar 1:6 on wall surfaces finished even and smooth without using extra cement complete all as specified and directed by engr-in-charge.
S&F in repairs 15mm bore Chromium plated jet spray with 1.0 mtr long PVC pipe and CP connector all as specified.
M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L Chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying CICO Clean-o rust rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with CICO ZINCILATE-500 or equivalent to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. Make: CICO clean-O-rust, CICO ZINCILATE-500 or equivalent in Fosroc/Dr Fixit/ACC/L&T/STP. (Note : (i) The work shall be carried out upto 10.0 M height) (ii) All safety measures shall be taken by contractor as per MES safety code.
M & L for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of CICO-Latex SBR or equivalent in Fosroc/Dr Fixit/STP as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labors, supervision, tools, tackles, transportation, fixing etc., complete as per specification and as directed. MAKE: CICO LATEX SBR or equivalent in Fosroc/Dr Fixit/krishna conchem/STP. (Note : (i) The work shall be carried out upto 10.0 M height) (ii) All safety measures shall be taken by contractor as per MES safety code.
M & L for applying injection grouting through the nozzles. Drilling the holes of 12mm dia upto 100mm deep and fixing of nozzel of 10mm with using CICO NO.3 hardner chemicals. Inject the polymer based cement grout CICO NSPGC grout with cement to RCC wall/ceilling in adequate pressure and seal the nozzel complete as per manufacturer instruction. Item rates are inclusive of all labour, chemicals, supervision, tools and tackles and transportation etc. Required cement would be extra or charged extra, complete as per specification and as directed. . Make : CICO No. 3 NSPGC grount hardner or equivalent in Dr Fixit/Fosroc/STP. (Note : (i) The work shall be carried out upto 10.0 M height) (ii) All safety measures shall be taken by contractor as per MES safety code.
Supply Only cement ordinary portlant or PPC in bags
M & L for perparation the surface and applying 10 to 40 mm thick in layers , each layer n.exc 20mm thick with polymer modifed mortar (PMM) on sufcace of slab/columns/beams/chajjas/parapet /roof projection/balcony/staircase with PMM-CICO Repocem PM or equivalent in Fosroc/Dr Fixit/STP including all necessary scaffolding, man and material complete all as specified and directed by Engineer-In-Charge. (Note : (i) The work shall be carried out upto 10.0 M height) (ii) All safety measures shall be taken by contractor as per MES safety code.
M & L for 25mm to 35 mm thick cement plaster CM 1:3 over existing treated surface of polymer modified mortar. each layer thickness not exceeding 25mm complete all as specified and directed by engr-in-charge. Note : The work shall be carried out upto 10.0 M height.
Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even & smooth all as specified.
Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.
M&L PCC for 20cm thick precast cement concrete type C1 1:3:6 using 20mm graded stone aggregate block masonry with solid block, set in CM 1:6 all as specified & as directed.
M & L for 75 mm thick PCC 1:3:6 type C-2 (40 mm graded stoneaggregate) finishing the surface with even and fair without using extra cement all as directed.
M&L for 75mm thick PCC (1:2:4) type B-1, using 12.5mm graded stone aggregate as in floors finished even and smooth without using extra cement all as directed. .
M&L for 25mm thick PCC (1:2:4) type B-0 using12.5mm graded stone aggregate as in floors finished even and fair without using extra cement all as directed. .
Dismantling wrought iron or mild steel work of any description complete all as specified
S & F framed work as in doors or gates or coolar stand of angle or other section with gusset plates, rails, braces, etc, comlete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and pintal hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe-290 Gde-E-165.
M/s Malinath Electricals
Devi Engineeing
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .