MLA FUND 2023-24

Amount

Benching hard rock upto an average 10cm depth

Providing dowel bars of 25mm dia mild steel hooked at top including drilling holes of 40mm in hard rock to a depth of 1.00m and including dowel bars of 25mm dia such a way that 1.00mis inside hard rock 1.00m above and bend up for 0.40m length hard rock level and will be embeded to the foundation footing and filling the gab of dowel holes with cement mortar 1:1 mix including cost of dowel bars handling charges fabrication charges including labour for fixing in position and bending to shape etc., complete

Earthwork Excavation for foundation in all types of soils and sub soils including soft disintegrated rock and soft rock to the full depth including all leads and lifts etc., complete complying with the standard specification, drawing and as directed by the departmental Engineers.

Cement concrete of mix 1:4:8 (one cement – four sand – eight broken stone) using Hard broken granite stone jelly of 40 mm gauge for foundation leveling course, standard specifications and drawings and has directed by departmental Engineers. Including cost and conveyance of all materials to working site, laying and curing etc.

Collection supply and filling of well gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

Brick work in cement mortar 1:5 (one cement five sand) using best quality country bricks including cost and conveyance of all materials to working site in super sector curing etc. complete. Complying with standard specifications and has directed by departmental Engineers. Including cost and conveyance of all materials to working site etc.

Supplying and erecting steel centering including necessary supports for plane surfaces using MS Sheets of size 90cm x 60cm and or suitable shifted with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joints of size 10cm x 6.5cm, complete complying with standard specification

Column

Grade beam

Roof slab

Supplying, fabricating and placing in position mild steel or tar steel bars for all reinforced cement concrete items of work including cost of steel transporting, straightening, cutting, bending, cranking, blinding, welding etc. including cost of MS or RTS rod and binding wire, all labour and materials complete Complying with standard specifications and drawings as directed by departmental Engineers.

Providing and laying reinforced cement concrete of mix 1:1.5:3 (one cement, one and half sand and three metal) using machine crushed hard broken granite stone jelly 20mm ISS gauge for RCC works but including curing etc. and including fixing fan clamps or hooks,. complete Complying with standard specifications and drawings and has directed by departmental Engineers.

Plastering in Cement Mortor 1:3 Mix to 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Plastering in Cement Mortor 1:5 Mix (one Cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Supply and fixing in position of RCC Jolly 50mmtk including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete

Supplying and fixing in position of 20" size white Orissa pan Water closet of approved quality with S or P trap including fixing the same in position etc., completed.

Supplying and fixing in position of 20" size Europian type Water closet with 10lit Capacity water tank of approved quality with S or P trap including fixing the same in position etc., completed.

Supply and Laying of 1000Lits capacity HDPE Tank with approved Quality Including all cost and conveyance etc.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un plasticized polyvinyl chloride (UPVC) sections. Profiles: The profiles should be three chamber systemwhich provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60x102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. The profiles should be cut to length and welded 45 degrees.The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supply, fabricating & fixing in position of M.S door Gate of size 0..90 x 2.10m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.

Dadooing the walls from the floor level with white glazed tiles of 300mmx300mm x 6mm of best and approved quality set in cement mortar 1:2 mix (one cement and two sand) 12mm thick and pointing with white cement neatly as directed Complying with standard specifications

Flooring with Ceramic tills 30cmx30cmx6mm thick laided with cm 1:3 10mm thick and point with cement using 0.40kg per M2 including finishing and joint and pointing flush suraface etc complete

Painting two coats with Exteroir Emulsion paint over newly plastered surface over one coat of primer including cost and conveyance of all materials to site , all labour charges etc,complete., etc.

Painting two coats with ready mixed enamel paint for new iron work over one coat of primer including cost and conveyance of all materials to site , all labour charges etc,complete., etc.

Wring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW Switch box and 5A F.T. switch and making good of the concealed portion with suitable Colour for PVC concealed light Point/ fan point. S.D.24

Wring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW Switch box and 5A F.T. switch and making good of the concealed portion with suitable Colour for PVC concealed Plug point

Supply and fixing of WT bulk head fitting with guard suitable for incandesant lamp with 60 W bulb SD80

Supplying and fixing 4' 40W street light fitting complete with copper choke and condensor with 19 mm GI pipe complete on the existing post with 16A aerial fuse unit on plate with PVC unsheathed leads with MS clamps and aluminium painting with flu. Tubes.(SD89)

Supplying and fixing of 16Amps DP Switch with metal clad of 500 V with fase and neutral ( side handle ) on suitable TW Box with PWD earthing etc., complete.(SD135)

Supply and fixing of TNEB meter board suitable for 16 A Single phase service connection with 3 nos. 16A fuse unit (500V) 16A neutral link and earth link (1"X1/8"copper flat) on TW plank of size 600 mm X 450mm X 19mm with supporting TW reepers of 1" tk.on either side with painting with suitable bolts and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

Supplying and fixing of MS box for fixing the meter,panel board and main switch to a size of 75X35X60cm over the ex.masonry work with locking arrangements including cost and conveyance to site and all labour charges etc.

Supply and run of 2 of 1.5 sq.mm (56/0.3) Polythene insulated SC.unsheathed Cu.conductor of 1100 V Grade on 7/20 GI bearer wire for service connection main(SD63)

Supply and run of 2of 1.50Sq.mm polytheen insulated sc unsheathed cu.conductor of 1100 V Grade in 25mm dia GI pipe suitable bent at both ends with necessary angle iron upright & end supports for Mains (SD 67)

Supplying laying and jointing G.I. Pipes of approved quality of 'B' class pipes of the following sizes including fixing G.I specials but excluding cost of such specials for external water supply above ground level , including cutting and threading of pipes and fixing with necessary teak wood plugs, clamps and screws and making necessary holes in masonry or RCC works and making good the dismantled portion to original conditions including necessary scaffolding charges etc., complete. (The pipes are to be painted with two coats of synthetic enamel paint over a priming coat which will be measured and paid separately)

For Water Line 40 mm PVC

For Water Line 20 mm PVC

Supplying and fixing in position of PVC soil pipes of best approved quality and make confirming to I.S.S of the following dia metres and providing leak proof joint using PVC adhesive including fixing to the wall with necessary T.W plugs, brass screws, PVC / mild steel clamps etc., and giving connections to the sanitary fittings including dismantling brick masonry, R.C.C floor or roof slab etc., wherever necessary and making good the dismantled portion to the original condition etc., complete complying with standard specifications and as directed (The PVC pipes should be got approved from the Executive Engineer before use on works)

110 mm PVC line

D SAKTHIVEL