CERTAIN REPAIRS OF WATER SUPPLY DISTRIBUTION SYSTEM AT DG NCC CAMP IN THE AREA OF AGE U WS II UNDER GE U WATER SUPPLY DELHI CANTT 10

Amount

Labour only for Attending day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, no water supply including noting the complaints in complaint register complete all as specified and as directed. Note for srl No 1:- Material required for attending complaints shall be measured & paid separately under respectvie items here-in-after.

Notes for Srl No. 1 :- The rates quoted by the contractor shall also deemed to be included for the following :- (i) The complaints shall be attended and the defects shall be rectified by a team of Two Experienced Plumber assisted with One number of helper, matriculation passed qualified having minimum 03 years experience . (ii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from Contractor's dues. (iii) In case , after checking & attending the defect,if it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. If Engineer-in- charge is satisfied with contractor's view, no recovery will be made.

(iv) While attending the complaint of water supply/Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A'/BOQ. However no extra payments shall be made for dewatering. (v) Cutting of GI pipe in position and threading is also deemed to be included in the job quoted rates (Fittings and fixtures shall be measured and paid separetely under respective items of Sch A/BOQ). (vi) All T&P required for attending the complaints shall be provided by the contractor without any extra. (vii) The pipe fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench ,Chain wrench, Caulking tools, complete set of spanners and ladders etc..,as required at site. (viii) The elecrician shall always be in possession of all Electrician tools , LT Megger, Earth tester , Multimeter , Crimping tool, insulation tape, Hand gloves etc required at site.

Supply only GI Socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Socket 15 mm bore

GI Socket 20 mm bore

GI Socket 25 mm bore

GI Socket 40 mm bore

GI Socket 50 mm bore

Supply only GI Elbow, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Elbow 15 mm bore

GI Elbow 20 mm bore

GI Elbow 25 mm bore

GI Elbow 40 mm bore

GI Elbow 50 mm bore

Supply only GI Union, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Union 15 mm bore

GI Union 20 mm bore

GI Union 25 mm bore

GI Union 40 mm bore

GI Union 50 mm bore

Supply only GI Nipple of different length as per requirement, both ends screwed, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Nipple 15 mm bore

GI Nipple 20 mm bore

GI Nipple 25 mm bore

GI Nipple 40 mm bore

GI Nipple 50 mm bore

Supply only GI reducing socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI reducing socket size 20 x15 mm bore

GI reducing socket size 25 x15 mm bore

GI reducing socket size 25 x20 mm bore

GI reducing socket size 40 x20 mm bore

GI reducing socket size 40 x25 mm bore

GI reducing socket size 50 x25 mm bore

GI reducing socket size 50 x40 mm bore

Supply only GI Tee, Medium Grade, complete all as specified and as directed of following sizes

GI Tee , 15 x 15 x 15 mm bore

GI Tee , 20 x 20 x 15 mm bore

GI Tee , 20 x 20 x 20 mm bore

GI Tee , 25 x 25 x 15 mm bore

GI Tee , 25 x 25 x 20 mm bore

GI Tee , 25 x 25 x 25 mm bore

GI Tee , 40 x 40 x 20 mm bore

GI Tee , 40 x 40 x 25 mm bore

GI Tee , 40 x 40 x 40 mm bore

GI Tee , 50 x 50 x 20 mm bore

GI Tee , 50 x 50 x 25 mm bore

GI Tee , 50 x 50 x 40 mm bore

GI Tee , 50 x 50 x 50 mm bore

Supply only GI plug, solid, heavy duty, complete all as specified and as directed of following sizes.

GI plug, 15 mm bore

GI plug, 20 mm bore

GI plug, 25 mm bore

GI plug, 40 mm bore

GI plug, 50 mm bore

Supply only PTMT float valve, Sizes as under, with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed.

PTMT float valve, 15 mm bore

PTMT float valve, 20 mm bore

PTMT float valve, 25 mm bore

Supply Only Gun metal gate valve, with iron wheel head screwed both ends for iron pipe as per IS-778 and fixed including taking out unserviceable one, complete all as specified and as directed of following sizes.

Gun metal gate valve, 15 mm bore

Gun metal gate valve, 20 mm bore

Gun metal gate valve, 25 mm bore

Gun metal gate valve, 40 mm bore

Gun metal gate valve, 50 mm bore

Supply only 15 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, for pipe of size 15 mm bore complete all as specified and as directed.

Supply Only 25 to 150 mm long, 6 to 20 mm dia nuts, bolts & washers complete all as specified and as directed.

Supply Only lead pig bar complete all as specified and as directed.

Supply Only Spurn Yarn complete all as specified and as directed.

Taking up or down GI steel tubing of following sizes with connections from Trenches/floors/walls including cleaning for refixing or removal complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Refixing/ relaying, jointing and testing old GI steel tubing of following sizes, retrieved under srl No 19 here-in-before in new or old position at walls,ceiling or floor etc including cleaning or rerunning the old screw threads, with & including providing new GI fittings complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

25 mm bore

40 mm bore

50 mm bore

80 mm bore

Supplying, Laying and Testing of GI steel tubing medium grade of following size in old or new position as in ceiling/walls/Floors with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed.

GI steel tubing, 15 mm bore

GI steel tubing, 20 mm bore

GI steel tubing, 25 mm bore

GI steel tubing, 40 mm bore

GI steel tubing, 50 mm bore

Supplying, Laying and Testing of GI steel tubing medium grade of following size in old or new position as in Trenches with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed. Note :- (i) Excavation & earth work for new locations shall be measured & paid separetely.

GI steel tubing, 15 mm bore

GI steel tubing, 20 mm bore

GI steel tubing, 25 mm bore

GI steel tubing, 40 mm bore

GI steel tubing, 50 mm bore

Labour for cutting and screwing existing tubing for alterations or additions complete all as specified and directed of following sizes.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Taking up or down CI water mains of following sizes including all fittings) with spigot and socketed ends and lead tyton joints including burning out lad joints and recovering lead and including cleaning for refixing or removal complete all as specified and as directed. Note:- Excavation & earth work shall be measured & paid separetely.

100 mm bore

150 mm bore

Relaying CI Pipes of following sizes with spigot and socketed ends, cleaning thoroughly and removal of all blockages if any, complete all as specified and as directed.(old serviceable pipe shall be obtained from Item no. 23) Note:- Joints and CI fittings shall be measured & paid separetely.

100 mm bore

150 mm bore

Supplying, Laying, jointing, testing and commmisioning DI Pipe of following sizes as per IS 8329-2000, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches complete all as specified and as directed . Note:- (i) Joints shall be measured & paid separetely. (ii) Fittings , if any shall be measured and paid separately.

100 mm bore

150 mm bore

M&L for laying and jointing CI/DI Fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars,tail pieces,caps and plugs Upto 150 mm bore conforming to IS: 1538-1993 complete all as specified and as directed.

Supply only 'stem' made out from stainless steel of sluice valve of following sizes, complete all as specified and as directed.

Stem, 100 mm bore

Stem, 150 mm bore

Supply only 'Stem Nut' made out from stainless steel suitable to match with existing sluice valves & foot valves, sizes as under, complete all as specified and as directed.

Stem Nut, 100 mm bore

Stem Nut, 150 mm bore

Supply only 'Gland Plate' made out from Cast Iron suitable to match with existing sluice valves and foot valves , sizes as under, complete all as specified and as directed.

Gland Plate, 100 mm bore

Gland Plate, 150 mm bore

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.

Surface dressing of uneven surfaces of natural ground, rough excavated surfaces not exceeding 15 cm deep and filled area where ordered shall be trimmed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site. complete all as specified and as directed.

Taking down the unserviceable FASD ML 6 (with MU relay) any size and replacement with new FASD ML4 (with MU relay)100 HP including stainless steel box existing starter panel complete all as specified and as directed.

Supplying and fixing in replacement of water level indicator, electronic type, for overhead/under ground water tank reservior,comprising of three stage magnetic sensor concealed in stainless steel tube of equired length & features of alarm on low and high levels with indications including required cable to make it fully serviceable/funcional complete all as specified and as directed.

Supply & fixing LED Based Outdoor Weatherproof Aviation Obstruction Lighting Luminaire Features: With Inbuilt AC-DC Converter 48V / 160 – 230 VAC Housed in Die-Cast Aluminum (LM 6) / Aviation Orange Finish Ultra Violet Stabilised Acrylic Lens for directing light Built in Photo Controller / Built in SS Bird Spike Solid State high flux Light Emitting Diode / Intensity: 32.5 Candelas Life: >50000 Hrs / Sealed with EPDM Gasket Power Supply: AC-DC Converter 48V / 160 – 230 VAC Standards: Confirms to ICAO Annex 14-6, FAA AC No. 70/7460-IG, Radio Interference: BS 800/EN 55014 Connections: Via 2-3 Core Cu 1.5 Sq. MM Cable complete with 25mm PVC Pipe. Mounting: Through 20MM OD Pipe with 14 TPI complete all as specified and as directed.

An amount of Rs 15435.00 shall be deducted from BOQ on account of schedule of credit

Yadav Enterprises

Deven Associates

Ridhi engineers and builders

PUJA ELECTRICALS