SPL REPAIR TO SINGLE OFFICERS ACCN QTR NO 277/1 AND 2 (FF) OF MH GOLCONDA AT NEW MD LINE AND PROVN OF GEYSER FOR JCOS/OR MD ACCN AT ARTY CENTRE, HYDERABAD UNDER GE GOLCONDA

Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as specified and directed.

S&F Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410 -W (GdeE- 250) qualityA complete all as specified and as directed.

S&F MS work as in fencing post and struts including cutting tops to shape as directed , drilling holes, notching for wire etc., flat iron fillets,nuts & bolts etc for securing wire mesh including all necessary drilling, bolting or riveting etc., similar works con forming to Fe-410 or Fe-310 grade, complete all as specified and directed.

S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide new or untreated steel surfaces exc 10 cm in width or girth including preparation complete all as specified and directed.

M & L for Cutting out V - grooves in plaster / masonry and inserting the waterproofing membrane and making good in CM 1:3 complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding finished even and smooth using extra cement with WPC complete all as specified and directed. (NOTE : Supply of WPC will be paid under the respective Item)

M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bituminous primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and providing necessary slope with using WPC @ 3% by weight of cement complete including taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbing down with water to receive new treatment complete all as specified and directed.

Taking up or down for bore of pipes in 15 mm, steel tubing and connections, including cleaning for refixing or removal to store etc completed all as specified and directed.

M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete all as specified and directed.