TS No 08/25-26 of SE GCC Cbe

Amount

Supply of Rolled Steel ISMB as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco. RSJ 250x125 mm

Supply of Rolled Steel ISMB as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco RSJ 200x100 mm

Supply of mild Steel ISMC as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco MS Channel 125x65 mm

Supply of mild Steel ISMC as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco MS Channel 100x50 mm

Supply of mild Steel ISMA as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco MS Angle 100x100x8mm

Supply of mildSteel ISMA as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTranscoMS Angle75 x75x8mm

Supply of mild Steel ISMA as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco MS Angle 65 x65x6mm

Supply of mildSteel ISMA as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTranscoMS Angle 50 x50x6mm

Supply of Mild steel as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco MS plate various size ( 6,10 mm)

Supply of Mild Steel as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco MS Flat 65x10mm

Supply of Mild Steel as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco MS Flat 50x6mm

Supply of Mild Steel as perlatest issue of BIS 2062 grade A, and from the approved vendors TanTransco MS Flat 25x3mm

Supply of Earth Spikes by using 40mm M.S. Rod & GI Earth pipe at a height of 3mts,MS Angle, Bolt , Nut with washer (40mm Dia, 3m length)

Supply of materials for earth pit of 115 mm dia to a depth of 6 mtrs. including cost of materials for earth electrode using M.S.rod 40 mm dia ,MS Angle , red soil and bentonite powder of 20 Kg and other sundries as per approved drawing . Identification board of size 300 X 150 mm 14 SWG,GI Bolt & Nut as directed by the field Engineer

Supply of M8, M9, M10, M12 & M16 full thread GI bolt, nuts & GI washer of various size with IS Grade for erection of insulator or any other purpose wherever required and as directed by the field Engineer.

Supply of `B` Class GI pipe for extension of tandum /down pipe for AB Switches and for any other work as required and as directed by field Engineer 40 mm dia

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Tension fitting Clamp 6 bolted

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.switch end clamp for zebra

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.switch end clamp for 3" bus

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.Free end clamp for 3" bus

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.'T' clamp for 3" Bus to Zebra

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.'Bus bar jointing clamp for 3"

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.'corona bell for 3" bus

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification 'T' Clamp for Zebra to Zebra

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Expansion camp for 3"Busbar

Supply of the following Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification PG Clamp for Zebra

Anchor Shackle F.S (Forged Steel) with 20mm Bolt & Nut with SS R-Clip

Supply of reputed make long shackle 6lever lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key token as directed by the field Engineer.

Supply of flexible copper tape/rope for interlinking panel earthing and for any other purpose, on any sizes, including the cost of copper lugs at both ends as directed by the field Engineer

Supply of ISI mark cable glands as directed by the field Engineer. 19/22mm

Supply of ISI mark cable glands as directed by the field Engineer. 25mm

Supply of ISI mark cable glands as directed by the field Engineer. 28mm

Supply of lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination

Supply of ISI mark bakelite HRC fuse holder in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer. 16Amps

Supply of ISI mark HRC Fuse of reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer 2/5/10/16 AMPS

Supply of disconnected type terminal block suitable for CT Circuits in panels/ box as required & as directed by the field Engineer

Supply of enamael Paint including cost of paint, brush and consumables etc.,

Supply of PVC Stickers for Breakers, Panels, chargers and General key Boards as required and as directed by field Engineer,

Labour, Machineries, consumables for fabrication of structures as per the drawing issued by field engineer. Heavy section without length wise welded joints (Sectional weight 14Kg/Mtr and above) (Electricity supply will be brone by department)

Labour, Machineries, consumables for fabrication of structures as per the drawing issued by field engineer. Light section with joints wherever necessary (sectional weight below 14Kg/Mtr) (Electricity supply will be brone by department)

Labour charges for erection of structure structures as per the drawing issued by field engineer. Erection of Heavy section (sectional weight 14Kg/m and above) under LC

Labour charges for erection of structure structures as per the drawing issued by field engineer. Erection of Light section (sectional weight below 14Kg/m) under LC

Labour charges for erection of structure as per the drawing issued by field engineer. Heavy section (sectional weight 14Kg/m and above)

Labour for erection of CT/PT junction box ,AC distribution box, yard light box ,change over switch including fabrication of clamping arrangements with provision of hardwares,etc.

Erection of GI/MS pipe for extension of tandum /down pipe for AB Switches and for any other work as required by and as directed by field Engineer

Fixing of flexible copper tape/rope for interlinking panel earthing and for any other purpose as directed by the field Engineer

Labour for erection of single pole stack up right, under hang or suspension. with provision of hardwares,etc. 110 KV

Labour for hot dip galvanising mild steel materials wherever necessary as directed by the field Engineer

Erection of strung bus Labour for strining of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 110KV Single Zebra conductor (1 span 3 run)

Labour for erection of bus bar Without making bends with appropriate machineries and consumables dismandling of 75mm IPS Aluminium tube ( under LC)

Labour for erection of bus bar Without making bends with appropriate machineries and consumables Using 75mm IPS Aluminium tube ( under LC)

Labour for erection of bus bar Without making bends with appropriate machineries and consumables Labour for erection of bus bar With making bends with appropriate machineries and consumables 75 mm

Labour for Dismandling of jumpers and droppers Upto height of 6mts from ground level ( under LC)

Labour for providing Droppers and jumpers Upto height of 6mts from ground level

Labour for providing Droppers and jumpers Upto height of 6mts to 10mts from ground level

Labour for erection of . 110KV SF6 Circuit Breaker using contractor crane and including fixingof tandom rod alignment & gas filling by proper tools and tackles etc. 110KV SF6 Circuit Breaker

Erection of auxiliaries equipment Labour for erection using crane with provision of hardwares,etc.110KV CT,PT,NCT,reactor (one Single.Ph.unit)

Labour for erection of Isolator / AB Switches, including erection of insulators, alignment works with provision of hardwares,etc. without earth hand operated 110KV

Labour for dismandling of LAS including erection of base if required with provision of hardwares,etc.Station type single/ Double pole stack 110KV

Labour for erection of LAS including erection of base if required with provision of hardwares,etc.Station type single/ Double pole stack 110KV

Labour for assembling of panel, including supply & fabrication of MS flat 65x10mm for mounting arrangement and earthing of panel including hardwares.Simplex indoor / Out door

Labour machineries, consumables for erection of earth mat (Electricity supply will be brone by department)

Labour machineries, consumables for earth raisers for equipments and structures (Electricity supply will be brone by department)

Labour machineries, consumables For fabrication & erection of earth spikes without Materials including sharpening of Top portion & Galvanising, welding & Clipping the earthwire to earthmat / earthpit(Electricity supply will be brone by department)

Labour for Providing earth pit of 115 mm dia to a depth of 6 mtrs including fabrication of earth electrode using M.S.rod 40 mm dia, MS Angle & insert electrode in to the bore and refilling with red soil and bentonite powder of 20 Kg and Cement Collars and other sundries. Identification board of size 300 X 150 mm 14 SWG. lettering and 12 mm M.S.Round rod with suitable bolt to be fixed in the board and anti corrocive black paint should be painted top of the earth rod & its holding portion as directed by the field Engineer

Labour for excavation & refilling of avg depth of 0.8m x 0.3m for earth mat (Normal Soil )

Labour for excavation & refilling of avg depth of 0.8m x 0.3m for earth mat (Hard Soil)

Labour for laying of cable in duct/ trunch including the cost of Aluminium tag for identification. Upto 8Core

Labour for laying of cable in duct/ trunch including the cost of Aluminium tag for identification. Above 8core

Labour laying of cable & clamping in structureUpto 8Core

Labour laying of cable & clamping in structure Above 8core

Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location. 19mm

Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location. 25mm

Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location. 28mm

Labour Charges for cable core end termination

Fixing of all types of MCB, fuse holder and fuse of all range wherever required as directed by the field Engineer.

Fixing of terminal block /disconnected type terminal block as required and directed by the field Engineer

One coat of enamel painting /Anticorrosive painting of cheqqurred plates ,equipment board ,identification of earth pit board and Yard light pole ,structure earthing ,earth mat ,earth pit shoe paint and iron & steel items as directed by field Engineer.

Labour charges for writing details in Finished Surface boards including cost of enamel paint (Dulex, Asian, Berger preferred) and other Consumables as directed by the field Engineer.

Labour charges for drawing layout and writing details/ Vinyl Printing in LC/ Key board including cost of enamel paint (Dulex, Asian, Berger preferred) and Other consumables as directed by the field Engineer.

Fixing of PVC Stickers for Breakers, Panels, chargers and General key Boards and other works etc., as required and directed by field Engineer,

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation. 110 KV Isolators - Non Fragile materials

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation. - Non Fragile materials Cables/Conductors including cutting and rewinding

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation. - Non Fragile materials Busbars

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation. Fragile materials110 KV Breaker

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation. Fragile materialsCT/LAS/Others

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation. Fragile materials 110 KV Insulators

Conveyance charges for transporting by road in plains iron & steels (35 km)

Conveyance charges for transporting by road in plains equipments ,panel & insulators (35 KM)

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

Vidhyut Nirman Corporation (BID ID -1365291)

S RATHIKA CONSTRUCTIONS (BID ID -1362958)