SITC of 2 nos. 6 body mortuary cooler unit along with all essential components in Kolkata Police Morgue, 2/1 Nil Madhab Sen Lane, Kolkata 73

Supply and Fixing of Blue Star make 6 body Modular Mortuary Cabinet (BMC 610SS-4), the body is made of SS304 corrosion resistant stainless steel. The wall, ceiling & floor will be fabricated modular panels of 100% foamed 80mm thick polyurethane insulation of 40 +/-2 kg/cum density, the blowing agent will be Cyclopentane which is zero ODP and foaming process should comply TUV standards & CCOE certification. Internal lighting will be waterproof CFL lamps, insulated multi doors are molded and stainless steel and externally locked, situated up front. Mortuary unit should be equipped with microprocessor based digital control panel to control temp between (+) 2 Deg. C to (+) 6 Deg C. The carriage assembly will be telescopic action, trolleys will be made of steel & sliding on telescopic rail and trays will be made of SS304 stainless steel with tubular edge, Size of mortuary cabinet (mm) -3165(W) x 2400(D) x 1785(H)- (3 Column & 2 Row). Blue Star make Refrigeration Unit is of split type, consisting of both evaporating and condensing unit. Blue Star make IDU is capable of being mounted on the cutout in the modular insulated ceiling of cabinet. For better condensation & fresh air requirement, Blue Star make CDU will be placed at outdoor of the morgue room / building which should be nearest to each corresponding chamber & IDU. Between each no of IDU and CDU, Copper refrigeration pipeline (5/8” & 3/8”) with nitrile rubber (13mm), filter drier (model-DCL053), electrical cable (2.5 Sqmm / 3Core & 1Sqmm / 3Core) & necessary fittings will be fitted. Blue Star make Refrigeration units are factory assembled, pre-charged and tested for ready field installation.

Refrigeration unit-RTU10SS / CDU RUAH 1014, (2 Sets - 1 Working + 1 Standby), Capacity -10000 BTUH, Refrigerant- R404A (Non CFC), evaporator fan-1600 cfm, evaporator coil-inner grooved copper tubes, 4 row, 8 FPI. Blue Star make Refrigeration unit of 10000 BTUH is capable up to 35 RFT refrigeration pipeline between each set of IDU to CDU. Above 35 RFT refrigeration pipeline between each set of IDU to CDU, CDU capacity should be needed 15000 BTUH, CDU- RUAH 1514, make- Blue Star, Refrigerant- R404A (Non CFC). 6 BODY MORTUARY CHAMBER WITH SPLIT TYPE REFRIGERATION UNIT [Double Refrigeration Unit- 1 Working + 1 Complete Stand by] Remarks : The above rates for SITC of the mortuary coolers are included with all necessary civil works such as RCC foundation, Brick pedestral structure, and all allied works.

Supply and fixing of Junction Box Syntex make with front side opening door and locking arrangement, with clamp. Junction box having 250mm x 200mm x 100mm (Inside) dimension and IP 66 protection Each have consist of 32A, DP MCB (L&T/ Havells)- 1no, Make- Syntex, Type No- GSJB. 2817 Make- Syntex/ Hensel/ or similar make

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Havells, Polycab, Finolex) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5 sqmm.

4 sqmm.

6 sqmm.

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.

Supplying and fixing 240 V DP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection of following ratings. 32A