CONSTRUCTION OF DIFFERENT BUILDING ,INTERNAL ROAD & BOUNDARY WALL OF USTAD BISMILLAH KHAN MUSIC COLLEGE AT DUMRAON DISTT- BUXAR, BIHAR.

ACOUSTICAL DOOR (HIGH PERFORMANCE – DOUBLE SKIN COMPOSITE TYPE) : Providing and fixing in position factory-fabricated acoustical door assembly comprising of solid wood frame of finished size 150 x 80 mm (±2 mm tolerance), kiln-seasoned and chemically treated, fixed with approved anchor fasteners. Door shutter shall be minimum 75 mm thick, constructed with internal hardwood grid framework (Solid wood) at maximum 600 x 600 mm c/c, infilled with 50 mm thick polyester fibre insulation of minimum 1000 GSM and density not less than 24 kg/m³, combined with high-density sound barrier membrane of minimum 3 mm thickness (min. 4 kg/m² mass loaded vinyl or equivalent) provided continuously on both faces. Both faces of shutter shall be finished with 12 mm calibrated BWR grade plywood and 1.0 mm thick high-pressure laminate, factory pressed under controlled conditions to ensure uniform bonding. All edges shall be lipped with hardwood of minimum 8 mm thickness, machine finished. Shutter shall be provided with perimeter acoustic sealing system including EPDM/neoprene gaskets, and drop-down acoustic seal at bottom to ensure airtight performance. Doors without complete sealing system shall be rejected. The complete door assembly shall achieve minimum STC 35–40. Hardware shall include minimum 4 nos. SS heavy-duty hinges (150 mm), mortise lock, SS handle, door closer, and all necessary accessories, suitable for acoustic application.

Frame shall be finished with polish/paint as per approved scheme, and shutter with approved laminate finish including decorative mouldings / trims as per architectural drawings. Rate shall include all required cut-outs, hardware fixing, sealing system, edge finishing, accessories, wastage, and complete installation as per direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Shining Sun / Viraaj Extrutech / Absolute Solutions / Audible.

STAGE WOODEN FLOORING : Providing and fixing in position teak wood stage flooring system comprising of machine-cut tongue & groove teak wood planks of size 20 mm (±0.5 mm) thickness, 70 mm (±1 mm) width and random lengths between 750 - 1200 mm, kiln-seasoned to moisture content 8–12%, with uniform grain and shade. Planks shall be fixed over 18 mm thick BWR grade plywood using approved adhesive and concealed nailing system, ensuring tight joints with maximum gap not exceeding 0.5 mm. The plywood shall be supported on hardwood sub-frame of section 45 x 35 mm, spaced at maximum 600 mm c/c (±5 mm tolerance), rigidly fixed using metal clamps and dash/anchor fasteners. All timber members shall be seasoned and treated with anti-termite and anti-fungal chemicals. Below the framework, 8 mm thick elastomeric shock absorption pads (minimum density 600 kg/m³) shall be placed at required intervals to provide resilient performance and load distribution. A continuous polyethylene vapor barrier (minimum 150 microns) shall be provided between sub-frame and base surface to prevent moisture ingress. The complete system shall be installed ensuring level variation not exceeding ±2 mm over 3 m span, with proper expansion gaps at periphery. Top surface shall be machine sanded (multi-stage sanding) and finished with minimum 3 coats of high-performance melamine coating, including sealer and top coat, achieving uniform matt/satin finish with anti-skid properties.

Uneven sanding, patchiness, or visible joints shall not be accepted. shall deliver impact vibration absorption suitable for auditorium use. Rate shall include complete sub-frame, shock pads, vapor barrier, fixing of teak planks, sanding, polishing, edge finishing, cut-outs, skirting interface, wastage, and installation, excluding cost of plywood , all as per drawings and direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Shining Sun / Viraaj Extrutech / Absolute Solutions / Audible.

ACOUSTIC CARPET FLOORING WITH UNDERLAY : Providing and fixing in position heavy-duty woven pile carpet of total thickness not less than 10 mm, having pile height minimum 6 mm, minimum pile weight 1000 GSM. Carpet shall be laid over closed-cell cross-linked polyethylene acoustic foam underlay of minimum 6 mm thickness and density not less than 30 kg/m³, having impact sound reduction properties, properly fixed to subfloor using approved adhesive. . Installation shall be carried out using full spread adhesive method, ensuring tight joints with seam strength not less than manufacturer’s standard, No visible joints. The complete system shall achieve impact sound reduction, Rate shall include surface preparation, adhesive, underlay, cutting, edge finishing, skirting interface, wastage, and complete installation as per drawings and direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Milliken / Shaw Contract / Nexgen.

Audi. Hall wall Panelling

Providing and fixing acoustic wall panelling consisting of 2x50 mm (making box) in vertical studs of GI framework of India Gypsum ltd placed at 610 mm c/c vertically and horizontally fixed on wall with cleats (GI supported systems) and supplying and fixing 50mm thick glass wool with black glass fibre tissue facing (32 kg/cum) of U.P. Twiga and held in place at rear and front with 22 swg x 12. X12.5 mm gi chicken wire mesh with 25 mm air gap in the rear. In front, Providing and fixing Black cotton/jute @ Rs 50 /Rmt 40mmx 15mm European steam beech wood slats over a backing of 12mm thick duro marine ply strips 100mm wide at 610mm centre to centre fixed with screw/ rawel plugs etc if necessary as per architect’s direction. European steam beech slats to be melamine matt polished. The gap between the slats to be 8 mm. This paneling is proposed to be upto ceiling level from ground and at all sides of the front stage from bottom to the ceiling. (Fixed to the satisfaction of architect )

WOODEN SKIRTING : Providing and fixing in position machine-finished teak wood skirting of 15 mm thickness and 100 mm height, made from kiln-seasoned teak wood with moisture content between 8–12%, free from warping, cracks, or visible defects. Skirting shall be factory polished with minimum 3 coats of melamine finish (matt/satin), including sealer and top coat, achieving uniform shade and smooth surface. All edges shall be machine-cut with slight chamfer/rounded profile, and skirting shall be fixed using concealed screws with wooden plugs and approved adhesive, ensuring tight joints with maximum gap not exceeding 0.5 mm. Joints shall be properly aligned and finished without visible mismatch. Skirting shall be installed true to line and level, with proper alignment to wall finish and flooring junction. Necessary grooves/rebates (if required) shall be provided for flush integration with wall paneling or flooring system. Back surface shall be treated with anti-termite and moisture-resistant coating prior to installation. Rate shall include all necessary cutting, edge finishing, fixing hardware, adhesive, polishing touch-ups, wastage, and complete installation as per drawings and direction of Engineer-in-Charge.

AUDITORIUM SEATING -Godrej Jupiter Mid Back chair(with cupholder) MB (PUSH BACK TYPE - HIGH PERFORMANCE):The seat shall be made of Polyurethane Foam moulded with 1.5 ±0.1cm. thk. plywood insert measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric. Approx. Seat Size shall be: Depth: 42.0cm, Width @ rear: 44.0cm. Width @ front: 41.0cm. The back assembly shall be flexing type and made of Polyurethane Foam moulded with MS. tubular frame insert and shall be upholstered with fabric and back cover. The insert shall be made of 01.9 ±0.02cm x 0.16 ±0.0.128cm. thk.MS tubular frame with flexible nylon straps running across the length and width of the frame. Approx; Back-Size shall be: Height: 65.5cm, Width @ top: 34.5cm. Width @ seat level: 46.0cm. The HR polyurethane foam shall be moulded with density = 45 +/-2 kg/m3. The back cover and mechanism cover shall be vacuum formed from black ABS sheets. The Armrest understructure shall be upholstered PU foam moulded with MS insert. Arm tops shall be made of black Integral Skin polyurethane with 50-70 Shore 'A' Hardness & reinforced with wooden insert. Armrest width= 7.0 ±0.5cm and shall be offered as common/individual armrest between chairs.

• MS black powder coated (DFT 40-60 microns ) understructure with integrated, auto tip-up mechanism which folds the seat when not in use. • Footprint area of base plate shall be made of HR steel 15.0 ±0.2cm X 22.0 ±0.2cm X 0.5 ± 0.05 cm thick. • Backrest supporting beam width shall be-46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2 ±00.16cm MS tube. • Understructure fixed to ground by 200 mm to 250 mm Hilti hheavy duty dash fastners. The auditorium chair shall be designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368. Overall Dimensions of Chair shall be Seat Height - 46.5 cm, Height - 89.0 cm, Width & Depth of Chair Width(w1)-53.0cm(individual), width(W2) - 60.0 cm.(common arm) and Depth-69.0 cm.(normal) , Depth(D2)- 54.0(seat folded).UPHOLSTERY: Stitched fabric upholstery should be as per following specs. Std fabric (Glory shades) Wt.: 320 gm/running meter Fabric width: 1.2 M Specs: 100% Polyester

Providing & fixing ‘Unistone’ Wall Cladding Clay Tiles in size 230mm X 75mm X 17 mm thick in approved natural clay shade or ‘Terracotta’ non-pigmented made from natural clay. The appearance and shade of tiles should be natural terracotta having subtle variation in shade. The tiles would be made from special clay and firing temperature would be more than 1100 Celsius. The allowed variance in these tiles should not be more than ± 2.5 mm & top surface should be coated with Silicone and surface water absorption should not exceed 1% and by immersion method it should be less than 10%.

Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/Tubular Structure ( MS built-up section :-Rolled section & plates confirming to IS 2062 Grade Yst 350,Tubular Structure:- made from Steel hollow sections, ISI marked from SAIL / RINL / TATA/JINDAL, conforming to IS 1161/4923/1239, Minimum Yst 240 thickness upto 10mm ) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc. With special plate connectors, pinion joints, plates, hollow sections including Preparation of detailed fabrication and erection drawings of Structural steel work from design drawings issued by Engineer-In-Charge and incorporation of Engineer-In-Charge's comments on same, ransportation from fabrication yard, cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to make structure of Tensile Membrane shade. The tubular structure system with plate connectors, pinion joints, etc. is to be provided. The structure has to be provided as per conceptual drawings of Tensile fabric profile , including all arch beam, curved lateral beams and bracings, vertical support columns, nodal joints, ,bases of columns and high tensile bolts of grade not less than 10.9 having black phosphate coating. The complete structure to be Hot Dip Galvinized along with one coat of epoxy primer and two coats of Polyurethane paint on steel work at all locations prepared by sand blasting in required minimum 210 micron DFT (dry film thickness) for each coat as specified in particular specification. The work is to be executed as per technical specification and direction of Engineer-In-Charge.

Design, Supply Fabrication and installation of tensile membrane fabric type II -900 gsm ( Serge Ferrari) , Tenseo Edition TXS 900 F (B4616) both side PVDF coat,the base yarn should be better protected with thicker coating process for greater performance against UV exposure,Total Thickness-0.78mm,Acoustic Performance-Weaking Index-14dBA-ISO717-1,Light Transmission-5% UV Transmission 0%,yarns should be pre-stress with tensile strength 420/ 400 daN/ 5cm, tear strength 55/ 50 daN as per manufacturer's specification and 10 yearsmanufacturer warranty.Flame Retardancy B-s2-d0/EN13501-1, make Serge Ferrari or Verseidag equivalant. Including cutting, welding and cables, plates and necessary hardware for fixing the fabric as per approved shape.serge ferrari fabric manufacturer authorisation letter required. Membrane shall be cut and manufactured with high frequency PVC welding machine, cost of all materials complete as per directions.Quality in conformity with ISO9001,Enviornmental communication in conformity with ISO14021.

Providing and fixing white vitreous china wash basin under counter / Table Top basin, with C.I. concealed type brackets fixed to walls with GI rag bolts or approved fasteners etc., including 32 mm CP brass waste coupling, including painting of fittings and brackets, cutting and making good the walls wherever required all complete (Granite counter top will be measured and paid separately under relevent item): as per approved make and decision of engineer-in-charge

Providing and fixing CP brass auto closing system basin pillar tap / hand wash as approved by Engineer- In Charge

Providing and fixing CP brass single lever mixer system basin pillar tap / hand wash as approved by Engineer- In Charge

Providing & fixing in position GI 100x50 elbow floor drain including cost of cutting and making good the walls and floors wherever required.

Providing and fixing 125 mm dia S/S grating (with or without hole)for floor or Nahani trap.

Providing & Fixing water cooler wth stainless steel having storage capacity of 80 liter & cooling capacity 60 liter / hour with Reverse osmosis system & ultra voilet membrane TDS reduction 90% having automatic back wash system with filteration unit & all other required accessories complete in all respect as per direction of the engineer in charge .

Providing and fixing hand held ablution fitting (health faucet) with 1.2 meter long flexible tube and wall hook, all complete approved engineer-in-charge

Supply and fixing of 15mm CP brass 2 -Way Bib Cock with wall flange and suitable length CP brass extension pipe all of approved engineer-in-charge

Supply ,Erection , Testing & Commissioning of Automatic water level control panel & related accessories for pumping automation with consisting of automatic water level controller , level sensor with stainless steel probe, motorized butterfly valve, motorized valve controller with complete in all respect. upto 50 mm dia. nominal bore

Providing and fixing HDPE Pop Up Sprinkler Irrigation System Pop height 100 mm with fittings all complete as per direction of engineer in charge.

Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete.

Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x 0.90 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in PO red colour suitable to accommodate, internal hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be fixed inside the FHC Cabinet Complete as required .

Supplying, installation, testing and commissioning of weather proof M.S hose cabinet of size 750 x 600 x 250mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following: - (for yard hydrant)

Providing and fixing standard firemans axe with heavy rubber handle.

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm.

Providing and fixing Fire Extinguishers (CO2 type powder ) 4.5 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers (A, B, C type powder ) 6 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing 25 mm dia Inspector Test Valve 25 mm with drain arrangement complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers Clean Agent capacity 2 Kg. complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers 50ltr. (Water & Foam type) complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers consisting of welded M.S. cylindrical body automatic modular CO2 type extinguisher.(Capacity 22.5 Kg.) complete with all accessories as per manufacturers specifications.

Design of lifts:- Passengers Type Capacity:-13Passengers Speed - 1.5 Metre/Sec. (MPS) Door Operation - Full Height Infra-red cross-multi beam Floor - B+5 = 6stops Travel - 22Mtr. (Approx.) Stop & Opening - 6 Stops & 6Openings (One side only)

Power - 415 V ±10%, 3 Phase, 50 Hz. Type or Design of Lift Car - Stainless steel scratch proof (Moon Rock Finish). Car door - Power operated centre opening horizontal sliding stainless steel Scratch proof (Moon Rock Finish) Door Safety - Full Height Infra-red cross-multi beam

Landing doors - Centre opening, stainless steel scratch proof (Moon Rock Finish) at all floors. It must be fire-rated for minimum 1-Hrs and supplier must provide the certiifcate for the same alongwith material supply. Car operating Panel / Landing operating panel - Car operating panel with braile symbol luminous buttons and braile illuminated push buttons on all landing in Stainless Steel Mirror finish. Hand rail - Shall be SS finished not less than 600mm long, fixed above 900mm from the car-floor level on rear-wall or side wall. Voice announcement system - In car to announce the position of the elevetor in hoist way as the car passes or stop at a floor served by the elevator.

Intercom system, Complete as Described above

Same as item above but Secondary point. i.e. Points to be looped with Primary point with 2.5 sqmm wire and Point wiring

Supply, Installation, Testing and Commissioning of 5W Mirror Light.

Supply, Installation, Testing and Commissioning of 100W Led Spot Light.

UPS SYSTEM:- Supply, installation, testing & commissioning of One Set of 1 Nos , 8 KVA UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 90 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other.

Supply, installation, testing & commissioning of One Set of 1 Nos , 4 KVA UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 90 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other.

LIGHTNING PROTECTION Supply of Lightnig counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, meet the requirements for IS/IEC 62305 and IEC 62561-2.Tested for Electrical ,Mechanical and Chemical as per IEC 62561.

Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections.

11 KV HT DP STRUCTURE

RSJ pole of 9.15 mt length of size 175 x 90 mm complete with suitable M.S. base plate welded at bottombase plate - 2 Nos.

MS Channel of size 100 x 50 mm, length 4 mts (approx)

11 KV AB switch - 1 set

11 KV Horn Gap fuse Unit - 1 set

11 KV Lightning Arrestor

11 KV Disc insulator

11 KV Pin insulator

6 SWG copper wire for jumpering

Supply and erection of Stay set complete with necessary foundation, excavation and refilling of earth etc. as required.

Concrete foundation for RSJ poles burrioed upto a depth of 1830 mm in ground in a pit of size 450X450 mm in CC 1:3:6 along with 200 mm copping above ground inclusive of earth work.

Necessary Nut, Bolts, clamps, operating handle for AB switch, clamping welding etc. complete as required.

Painting the RSJ poles complete with two coat of Red Oxide and two coats of GI enamel paints complete as required.

11 KV H.T. METERING PANEL (INDOOR TYPE):

Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger ( SMPS Based ) with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 12 Nos. 20/16A DP MCB's (D.C. duty) as outgoing complete as required and as directed by Engineer Incharge.

DISTRIBUTION TRANSFORMERS

Supplying of following size of aluminum conductor, XLPE insulated armoured and over all PVC sheathed, 11 KV (E) grade earthed cable as per relevant IS code and technical specifications

Supply of fire buckets 4 No. in each set duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. Fire buckets shall be painted red from outside and white from inside with additional handle at the bottom and suitable for outdoor installation.

Supply and fixing on position the approved Single Line Diagram framed in 1000 x 800 mm size glass frame and installed in main switch room as directed by Engineer Incharge

Supply of First Aid box as directed by Engineer Incharge

Supply of tool kit with 1 pair 11 KV rubber hand gloves as directed by Engineer Incharge.

Supplying & fixing standard shock treatment charts in English & Hindi duly framed and covered with glass as directed by Engineer Incharge.

Providing Safety mat made of elastomeric polymers Material (Class B) 1.2 M wide with thickness 2.5 mm to withstand 12KV dielectric strength AS PER relevant IS Code

Providing a mat made of elastomeric polymers Material (Class A )1.2 M wide with 2 mm thickness to withstand 1.1 KV dielectric strength AS PER relevant IS Code

500 KVA (With Outdoor Acoustic Enclosure)

250 mm dia

SS Flexible Bellow 250 mm dia

Aluminium cladding for the Residential type silencers

MAIN LT PANEL

STAF QUARTER (TEACHING) PANEL

STAF QUARTER (NON TEACHING) PANEL

PRINCPAL QUARTER VTPN DB

AUDITORIUM & ACADEMIC BLOCK VTPN DB

2C x 6 Sq.mm.

2C x 4 Sq.mm.

3C x 6 Sq.mm.

3C x 4 Sq.mm.

4CX 2.5 Sq.mm

4C x 4 Sq.mm.

4C x 6 Sq.mm.

1C X 50 sqmm Cu flexible(Unarmoured) cable

7 C x 1.5 Sq.mm.

12 C x 2.5 Sq.mm.

4C/3C x 6/4 sq.mm.

4C/3C/2C x 4/6/2.5 sq.mm.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 6 sq. mm (28mm)

Raceways and Floor outlet box

150 mm x 40 mm x 2 mm thick

100 mm x 40 mm x 2 mm thick

50 mm x 40 mm x 2 mm thick

Supplying, installation, testing and commissioning of Gate light fitting suitable for 42 watt IP 65LED having system lumen output of minimum 4200 lumens complete with all accessories and lamp.

Supplying, installation, testing and commissioning of 70W LED Solar Street Light On 6 Meter GI octagonal Pole having Compact, Aesthetic, Eco friendly & modern integrated Solar street light in extruted Aluminum construction with high efficiency monocrystalline silicon photo voltaic panel, high efficacy SMD LED 6500K having secondary lens optics for street lighting distribution, high performance lithium battery, MPPT charge controller & Intelligent control module/sensor with higher reliability, long service life, suitable for easy & quick installation.

Providing, installation of 200 x 150 x 125 mm polycarbonate weather proof (IP-55) junction box and SP MCB’s and terminal block.

Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete.

Supply, Installation, Testing & Commissioning of 16TB Surviellance Hard Disk. Approved Makes: WD /segate /Toshiba/HP

Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display Panel. Approved Makes: Panasonic / LG/ Sony/ Samsung

SITC of Category 6 RJ45 Unshielded Modular Jack, ISO/IEC 11801:2nd edition, EN 50173-1, ANSI/TIA/EIA 568-C.2 Category 6, IEC 60603-7 (603-7), Interoperable and backwards compatible with Cat.5e, Universal 110 Impact Tool & Tooless (Both) Termination, Min. 250Mhz Bandwidth, 1G BASE T, IDC >= 200 Re-Terminations, >= 750 Plug Mating Cycles, 1.5A Current, 30lbs Plug Retention, UL Certified UL 1863, Strain Relief boot for Pairs, Bend Limiting Boot for Cable, Without Any OEM Proprietary Tool Termination Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24-Port 1U / 48-port 2U Unloaded Universal Modular Straight Patch Panel preloaded with cable support Bar (with slots to tie individual cable properly at the Support Bar), Stainless Steel Rear Metal Frame, Individual Port Transparent Shutter and Labelling, Preloaded earthing plug for surge protection, UL 1863 Complied, CRC Metal with Black Powder Coated, RoHS Compliant, Individually Replaceable Port IO, (Shuttered IO not recommended, because when shutter gets malfunctioned then entire IO is of no use) Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6 Patch Cord U/UTP Unshielded 24AWG Bare Copper, Stranded Flexible Conductor, HDPE Insulation, LSZH Jacket, ANSI/TIA 568C.2 Category 6 Patch Cord, Support 1GBASE-T with Min. 250Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.0mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, PC UL94-V-0, Factory assembled with Transparent Premoulded Boots, Length 1 Meter. ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6 Patch Cord U/UTP Unshielded 24AWG Bare Copper, Stranded Flexible Conductor, HDPE Insulation, LSZH Jacket, ANSI/TIA 568C.2 Category 6 Patch Cord, Support 1GBASE-T with Min. 250Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.0mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, PC UL94-V-0, Factory assembled with Transparent Premoulded Boots, Length 3 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of UK Style (Square) Keystone-Type Shuttered Faceplates, 1, 2 & 4 port configurations, White Color, Elegant 2 Piece (2 Plate) design for better aesthetics , Cover and Base Plastic Material ABS-UL94-V2, 86 x 86mm Approved Makes: Derwiser/Nexans/Siemon/Systimax

Supply, installation, testing and commissioning of 5 MP (2502 x 1944) Dome camera ,ONVIF profile S , G & T, M. CE , FCC Certified ,1/2.7” Progressive Scan CMOS. Color 0.004lux, Shutter speed1/5~1/200000s,I/O,1INand1OUT,DC12V/PoEIEEE802.3af).265/H.265+/H.264/H.264+/MJPEG, 256Kbps ~ 8Mbps, 256GB SD Card, Triple Stream, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, NFS/SMB/CIFS, SSL/TLS, P2P. Analytics: Face Recognition, Pedestrian & Vehicle, Intrusion, Line Crossing, Object Detection, Crossing Counting, Heat Map, Crowd Density, Queue Length, License Plate, Rare Sound, Intrusion, Region Entrance, Region Exiting. 7 users, IP67 & IK10, -30～+60°C, AES 256. Approved Makes :Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, installation, testing and commissioning of 5 MP (2502 x 1944) Bullet camera ,ONVIF profile S , G & T, M.CE , FCC Certified ,1/2.7” Progressive Scan CMOS. Color 0.004lux, Shutter speed1/5~1/200000s,I/O,1INand1OUT,DC12V/PoE(IEEE802.3af),H.265/H.265+/H.264/H.264+/MJPEG, 256Kbps ~ 8Mbps, 256GB SD Card, Triple Stream, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, NFS/SMB/CIFS, SSL/TLS, P2P. Analytics: Face Recognition, Pedestrian & Vehicle, Intrusion, Line Crossing, Object Detection, Crossing Counting, Heat Map, Crowd Density, Queue Length, License Plate, Rare Sound, Intrusion, Region Entrance, Region Exiting. 7 users, IP67 & IK10, -30～+60°C, AES 256. Approved Makes :Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, installation, testing and commissioning of 256 channel, Live and recording resolution up to 12MP, Recording bandwidth Incoming 1024 Mbps and outgoing 800 Mbps, RAM 32 Gb*2, Support RAID 0/1/5/6/10, Support Face detection and Recognition with Face Capture/Register quantity 1000000/ 10000, 512 User list, display out 3 HDMI and 1 VGA port, HDD: 16 SATA HDD Slots, Each SATA support up to 18TB, Operating temperature -10°C~+50°C. Approved Make:- Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 24*10/100/1000M RJ45 ports and 4*1/10G SFP+ fiber slot ports, Port 1-24 can support IEEE 802.3af/at PoE standard, switching capaticy of 598 Gbps, forwarding performance 95.23 Mpps, maximum PoE output power is 400W(at-600W), with 32K MAC address. Should have Static Routing , system logging, Telnet, SSH2.0, SNMP V1/V2C/V3, Network Time Protocol (NTP), FTP, TFTP, Xmodem. Approved Make :Cisco/ Impulse / Juniper / Nexxus

Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 10*10/100/1000M RJ45 ports and 4*100/1000M uplink SFP slot ports, Port 1-8 can support IEEE802.3af/at PoE. Support DC dual power supply input and DIN rail mounting. Switching capaticy of 256 Gbps, forwarding performance 20.83 Mpps, having 8 x 10/100/1000BASE-T PoE-plus(RJ45) with maximum PoE output power is 120W(at-240W). , with 2*10/100/1000Base-T uplink RJ45 ports 4*100/1000Base-X uplink SFP slot ports., 8K MAC address. Should have Static Routing , system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), and IPv6 features from day 1. Approved Make :Cisco/ Impulse / Juniper / Nexxus

Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest. Approved Makes: HP / DELL / IBM / LENOVO

Supplying, installing, testing and commissioning approved make Addressable Multi-criteria Photo-Thermal Above False Ceiling Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. The detector sensitivity (day & night) shall be controlled from the panel to get accustomed to the local environment.The detector shall comply UL268, 7th Edition guidelines. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supplying, installing, testing and commissioning approved make Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Detector shall comply UL521 guideline. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supplying, installing, testing and commissioning approved make Addressable Loop Powered Autoaligned Beam Detector. The beam detector shall be used for High Ceiling application with a detection range from 5 upto 100 mtrs and highly resistant to building movement; tolerates +/- 1° movement, Resistant to solid object intrusion, , Built-in imager heater, Resistant to strong light sources; does not alarm when saturated by sunlight, Automatic sensitivity threshold level settings and drift compensation. The detector shall be IP-55 compliant. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supply, Installation, Testing & Commssioning of 1X500W Class-D Amplifier, which can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection and High Efficiency Class D Power Amplifier, 500W, 100V/70 Output, with 100 - 240 VAC input and 24 VDC backup power Supply

Supply and drawing of 2 C X 1.5 Sq mm multi stranded twisted shielded FRLS Copper cable.

SITC of Armoured 06 Core Singlemode (OS2) 9/125 Fiber Cable, ITU/T G.652.D, IEC 60794-1 Complied, Outdoor ECCS Armored Fiber Cable with PBT Loose Tube Filled With Thixotropic Jelly, Uni-Tube, 2 Steel Wire Embedded In HDPE Jacket, Water Swellable Tape Under Armor, UV-HDPE Jacket with 1.5mm Thickness, 7.5 +/- 0.5 mm Overall Diameter, Crush Resistant 2000N/100mm, Tensile Resistant 1000N, Bend Radius : 20 x Cable Diameter, Operating Temperature : -20 to + 60 Deg C, Max. Attenuation @1310nm & 1550nm : <= 0.35dB/km & <= 0.22dB/km Respectively, Cladding Non-Circularity ≤1%, Mode Field Concentricity Error ≤0.6 um, Coating/Cladding Concentricity Error ≤ 12 um, Nominal Weight 65Kg/km, Black Color Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 6 Port 1U x 19” LIU Loaded with Singlemode OS2 LC Adapters & LSZH Pigtails along with Splice Trays, Min. 4 No of Circular Cable Entry with Rubber Groummet/Glands to close any open entry, Cable Holders for Cable Entry Inside Panel, Heat Shrink Tubes for Splices, Tube for open fibers, Ties, Panel shall be Powder Coated with Min. 1.2mm Metal Sheath, 30 Years Channel Warranty. Factory Loaded LC Type LSZH Pigtails should meet IEC 61034-1 ,IEC-60332-1, IEC-60754-1, Insertion loss <= 0.35 dB, Return Loss >= 50, Attenuation: 1310/1550 : 0.3/0.2 dB/KM, Repeatability: <= 0.2DB 1000 Times Mating Cycles, RoHS Complied, Meets ANSI/TIA 568.3-D Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24 Port 1U x 19” LIU Loaded with Singlemode OS2 LC Adapters & LSZH Pigtails along with Splice Trays, Min. 4 No of Circular Cable Entry with Rubber Groummet/Glands to close any open entry, Cable Holders for Cable Entry Inside Panel, Heat Shrink Tubes for Splices, Tube for open fibers, Ties, Panel shall be Powder Coated with Min. 1.2mm Metal Sheath, 30 Years Channel Warranty. Factory Loaded LC Type LSZH Pigtails should meet IEC 61034-1 ,IEC-60332-1, IEC-60754-1, Insertion loss <= 0.35 dB, Return Loss >= 50, Attenuation: 1310/1550 : 0.3/0.2 dB/KM, Repeatability: <= 0.2DB 1000 Times Mating Cycles, RoHS Complied, Meets ANSI/TIA 568.3-D Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Fiber Patch Cord, LC Duplex - LC Duplex, 9/125μm OS2 Singlemode Duplex Zip Cord (<= 2.0mm), IL <= 0.35dB, RL>= 50dB, LSZH Jacket IEC 60332-1, Operating Temperature -40°C to +85°C, Meets ANSI/TIA 568.3-D, Length 3Meter Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat 6A, 23 AWG Bare Copper Solid Conductor U/UTP Unshielded LSZH Jacket (Min. 0.8mm Thickness), ANSI/TIA 568 C.2 Category 6A, Flame Rating IEC 60332-1, Halogen Acid IEC 60754 -1, Smoke Density IEC 60134-2, ISO/IEC 11801–2nd Edition, Min. 500 Mhz Bandwidth, Min. 10G BASE T, 7.2 mm Nominal Diameter, HDPE Insulation with Diameter 1.08 +/- 0.05mm, No Shield/Non Metallic Barrier Tape Inside Cable, Breaking Strength : >= 400N, Conductor Resistance <= 7.5 Ω /100m, Min. Elongation at Break of Insulation : 300%, Min. Jacket Tensile Strength >= 10 N/mm2 (Mpa), Dielectric Strength: DC 1500 V /Min., Euroclass Eca, RoHS Complied, Operating Temperature -20 to + 75 Deg C, IEEE 802.3bt Type 1, Type 2, Type 3, Type 4 PoE Complied, Propagation Velocity : 69% (nominal), Cable Roll of 305 Mtr, Cable shall not have any kind of Non Metallic Barrier Tape or Metallic Shield inside Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Category 6A RJ45 Unshielded Modular Jack, ISO/IEC 11801:2nd edition, EN 50173-1, ANSI/TIA/EIA 568-C.2 Category 6A, IEC 60603-7 (603-7), interoperable and backwards compatible with Cat.6, Universal 110 Impact Tool & Tooless (Both) Termination, Min. 500Mhz Bandwidth, 10G BASE T, IDC >= 200 Re-Terminations, >= 750 Plug Mating Cycles, 1.5A Current, 30lbs Plug Retention, UL Certified UL 1863, Strain Relief boot for Pairs, Bend Limiting Boot for Cable, Without Any OEM Proprietary Tool Termination Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24-Port 1U / 48-port 2U Unloaded Universal Modular Straight Patch Panel preloaded with cable support Bar (with slots to tie individual cable properly at the Support Bar), Stainless Steel Rear Metal Frame, Individual Port Transparent Shutter and Labelling, Preloaded earthing plug for surge protection, UL 1863 Complied, CRC Metal with Black Powder Coated, RoHS Compliant, Individually Replaceable Port IO, (Shuttered IO not recommended, because when shutter gets malfunctioned then entire IO is of no use) Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6A Patch Cord U/UTP Unshielded 24AWG Bare Copper Stranded Flexible Conductor, HDPE Insulation, Transparent Cross (+) Filler Between Pairs, LSZH Jacket, ANSI/TIA 568C.2 Category 6A, Support 10GBASE-T with Min. 500Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.2mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, Factory assembled with Transparent Premoulded Boots, Length 1 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6A Patch Cord U/UTP Unshielded 24AWG Bare Copper Stranded Flexible Conductor, HDPE Insulation, Transparent Cross (+) Filler Between Pairs, LSZH Jacket, ANSI/TIA 568C.2 Category 6A, Support 10GBASE-T with Min. 500Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.2mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, Factory assembled with Transparent Premoulded Boots, Length 3 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of UK Style (Square) Keystone-Type Shuttered Faceplates, 1, 2 & 4 port configurations, White Color, Elegant 2 Piece (2 Plate) design for better aesthetics , Cover and Base Plastic Material ABS-UL94-V2, 86 x 86mm Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 42U Floor Standing Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment to conforms to DIN 41494 or equivalent ISO standard.Front Door should be Lockable Toughened Glass Door, Steel Single, Steel Dual. Standard Finish should be Powder Coated with Black colour. Mounting Option : Castor wheels (Front 2 wheels with Break and rear without break) Or Levelers Or Base plinth. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Size Options : 600 x 600 mm / 600 x 800 mm / 600 x 1000 mm / 800 x 1000 mm / 800 x 1200 mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 22U Floor Standing Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment to conforms to DIN 41494 or equivalent ISO standard.Front Door should be Lockable Toughened Glass Door, Steel Single, Steel Dual. Standard Finish should be Powder Coated with Black colour. Mounting Option : Castor wheels (Front 2 wheels with Break and rear without break) Or Levelers Or Base plinth. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Size Options : 600 x 600 mm / 600 x 800 mm / 600 x 1000 mm / 800 x 1000 mm / 800 x 1200 mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 15U Wall Mount Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment.: Conforms to DIN 41494 or equivalent ISO standard. Standard Finish should be Powder Coated with Black/Gray colour. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 450/500/600mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 6U Wall Mount Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment.: Conforms to DIN 41494 or equivalent ISO standard. Standard Finish should be Powder Coated with Black/Gray colour. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 450/500/600mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 15U Weatherproof Outdoor Enclosure. Wall / Pole Mount Outdoor IP65 grade or BETTER Steel. Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.. Steel,Racks should be made out of steel and proceeded with CNC Punching, forming, welding and powder coated. Front Door with IP 65 Filter & hood , IP Compatible lock. CRCA Sheet Steel, Flush Mounted with Gasket seal. # Door opening 130º angle with concealed hinges. Top and bottom panel Welded to frame with cable entry exit cut outs in Bottom. Canopy made from CRCA steel sheet folded & welded with cut-outs for air exhaust. Removable canopy for maintenance purpose. Welded Construction with Special Dual Coat Powder coated. Lockable Metal Front Plain Door.Colour coat RAL 7035. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 400/600mm

Supply, Installation, Testing & Commissioning of Core switch minimum 48 x10G SFP+ Port, 4xQSFP28 Port.2XQSFP+ Ports Should have RPS and hot swappable PSU option from day 1. Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. switching capacity of1.92Tbps, forwarding performance 1400 Mpps, should have non-blocking architecture, 64K MAC address. Should have Static Routing, RIP, VRRP, OSPF ,BGP,PBR, PIM-SM,PIM-DM ,OSPFv3 ,VRF,ECMP.BFD - BGP,BGP4+,RIPng,URPF,ISATAP Tunnel from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of 24 port Distribution switch minimum 16 x10G SFP+ Port, 4xQSFP28 Port.8XSFP28 Ports.Should have RPS and hot swappable PSU option from day 1. Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. switching capacity of1.52Tbps, forwarding performance 1130 Mpps, should have non-blocking architecture, 64K MAC address. Should have Static Routing, RIP, VRRP, OSPF ,BGP,PBR, PIM-SM,PIM-DM ,OSPFv3 ,VRF,ECMP.BFD - BGP,BGP4+,RIPng,URPF,ISATAP Tunnel from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of Access switch 24x 1G PoE/PoE+ and 4 x 1/10GSFP+ ports. Should have hot swappable RPS from day 1, Should have AC and DC PSU mix and match arrangement for power source resiliency in the same hardware .Min 370 Watt PoE/PoE+ power budget . Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. Switching capacity of 168Gbps, forwarding performance 124 Mpps, should have non-blockingarchitecture,32KMACaddress.ShouldhaveStaticRouting,RIP,VRRP,OSPF,OSPFv3,RIP,BFDOSPF,BGP,PBR,ECMP,VRRP from day 1, Should support ISSU from day 1, Should support stacking with min 12 members in a stack(Stacking ports should be exclusive of above mentioned ports), Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1, MTBF Min 198000 Hrs. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of 8 Port POE+ Access Switches with switching capaticy of 96 Gbps, forwarding performance 71 Mpps, having 8 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 125W, with 4 x 10G SFP+ uplink ports. Should Non Blocking architecture , 16K MAC address. Should have Static Routing ,RIP,VRRP, OSPF from day 1,Should support ISSU from day 1 ,Should support stacking with min 12 members in a stack, Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr Approved Make : Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of fiber Modules 1000BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of fiber Modules 10G BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of fiber Modules 40G BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of ITAM Web Appliance Hardware: Rack based Intel Core i7 or better, 3.20GHz w/ HD Graphics, Memory 32GB 4x8GB DDR4 2666MHz, Minimum 1 TB SATA/SSD Drive, Integrated NIC, COTS Compliant.Web Appliance Software: Capture specifications, warranties, Serial Numbers, MAC Addresses, IP info, what other H/W relates/connects to this H/W, item status, event logs, assignees, Specifications, License information, Aprroved Makes:F5/ Palo-alto / Juniper / Nexxus/Arista

Supply, Installation, Testing & Commissioning of 4x4 Access Point Ceiling Mount having 1 x 2.5GE (PoE/PoE+) port , 1 x G Copper port .For 2.4G 2*2 MIMO, For 5G 4*4 MIMO .Built-in omnidirectional internal antennas, Dual frequency with min 6 Stream .For 2.4G: 3dBi and for 5G: 3dBi.200 square meter coverage (without any obstacle).Maximum number of users per band should be minimum 128. power consumption:18W. Encryption: AES, WPA3\802.11i: Supported, Authentication: MAC Address/PSK, Client isolation: Both Layer-2 wireless client isolation and SSID isolation, forwarding security: Packet filter, MAC address filter, and broadcast storm suppression, SSID-VLAN binding: Supported, Management frame protection (802.11w): Supported. Should be CE, FCC, CCC, ROHS certified. Access Points should have option to be managed by cloud infrastructure without replacing the hardware in future required. Approved Make : Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of Pure IP at core server Based voice solution with 04 Port Voicemail ,04 Port FXS ,04 Port FXO , 1 PRI Trunk lines (30 Channel x 1 = 30) Circuit with CLIP Facility ,33 IP users & 250 analog user License ,01 Nos. IP Operator Console, 100 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, TEC should be with GR Number, - Should Support Redundant server in active-Active mode.

Supply, Installation, Testing & Commissioning of Type 1 IP Phone 2 VoIP account, 120x40 Dot-matrix screen with backlight, Full HD duplex speaker phone, IPV6, Gigabit Ethernet, PoE .

Supply, Installation, Testing & Commissioning of Type 2 IP Phone with 4 Voip accounts, 4 line keys, 3.5-inch (480x320) Colour Screen display with backlight, GigE, colour displays for 6 DSS keys, IPV6, 2 x Gigabit Ethernet , PoE.

Supply ,Installation ,Testing & Commissioning of 4 Door 4 reader access control panel with with buttons for entering and reading cards and exiting the door, Large capacity of 24,000 users, 100,000 offline storage records. TCP/IP high-speed communication, convenient LAN and WAN wiring, The card reader can be connected to the international standard Wiegand 26bit-34bit Powerful functions. In addition to the access control function, the software also presents attendance, online patrol, conference sign-in, fixed consumption, WEB mother card function, and more cost-effective. Approved Makes : Lenel / Honeywell / Impulse

Supply, Installation , testing and commissioning of 12 V SMPS DC Power Supply Unit, highly regulated and spikes free terminal voltage and heavy sourcing current for regulated terminal voltage. Approved Makes : Lenel / Honeywell / Impulse

Supply & Installation of Operation system: Windows xp and the upward system, such as: Windows 2000 、Windows XP 、 Windows7、Windows Vista、windows nt、Windows 2000 sever、Windows 2003 、Windows Server 2008 and so on Database :MS Access (the default database after installation is the bringing small database of operating system) MS SQL Server (suggest more than 200 people, or swiping card every day more than 1000 records, had better choose to use this article database.) Approved Makes : Lenel / Honeywell / Impulse

Supply, Installing, Testing & Commissioning of fingerprint, IC/ID swipe card Fingerprint capacity: 1000 pieces Short Range Multi Technology Smart Card Reader UL Listed For Exit of Lift Access Doors, tripod/Flap barrier- Entry & Exit (doors) as per the specification, with back plate & Back Box. Approved Makes : Lenel / Honeywell / Impulse

Supply ,Installation ,Testing & Commissioning of Smart Card Contactless transmission of data and supply energy (No battery needed), Operating Distance: Upto 100mm (Depending on Antenna Geometry), Operating Frequency: 13.56 MHZ. Approved Makes : Lenel / Honeywell / Impulse

Supply ,Installation ,Testing & Commissioning of Electromagnetic Lock 600 lbs, Single leaf, LED Status Display, Approved Makes : Assa Abloy / Ablesco / Impulse / BEL

Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23 AWG LSZH as per ANSI/TIA 568 C.2 and ISO/ IEC 11801–2nd Edition, ROHS Compliant, solid copper conductors, tested @250 Mhz, with HDPE insulation of individual conductor and over all Dia of 5.8mm for Connectivity of Hub room to End Point. Approved Makes: Derwiser/Nexans/Siemon/Systimax

Supply and Laying of 8 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers & the access controllers) Approved makes : Polycab/ Havells/Bonton/KEI/Fionlex

Supply and Laying of 4 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers & the access controllers) Approved makes : Polycab/ Havells/Bonton/KEI/Fionlex

Supply ,Installation ,Testing & Commissioning of U/L Clamp made of aluminium anodised for EM Lock. Approved Makes : Assa Abloy / Ablesco / Impulse / BEL

Supply , Installation , Testing and commissioning of Exit push button as required. Approved Makes : Lenel / Honeywell / Impulse

Supply and Fixing of 25 mm dia MS Conduit. Approved Makes : AKG / BEC / MK

Supply, installation, testing and commissioning of automatic electromechanical boom barrier suitable road width 5-7 mtrs for intensive applications, high speed with 4-6 second opening/closing time with Aluminium housing & aluminium boom with fork rest, IP 67 Protection etc. (for Gate Entry/Exit) Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of a set of Entry/Exit push buttons for manual open and closing of barriers etc. complete as required.(for Gate Entry/Exit). Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of Photocell based safety device to avoid closing of the barrier when a Vehicle is crossing the barrier. ( Anti Fall Protection ). Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply installation, testing and commissioning of Remote & Receiver. Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of Loop detector for closing of the barrier when a Vehicle crosses the barrier. Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply, Installation, Testing & Commissioning of Long Range RFID reader with controller 10-12 mtr read range with suitable mounting arrangement for Outdoor Application and shall be compatible with boom barrier integration Approved Makes:- Speedgatz, Synergy, Kaba

Supply Installation Testing & Commissioning of 3mtr pole for mounting of RFID reader with all accessories complete as required. Approved Makes:- Speedgatz, Synergy, Kaba

Supply and programming of Wigand Proximity Cards/RFID Tagsa with credibility of having integrated 50 Readers integrated with Booms as a unified solution along with facility code as per specifications Approved Makes:- Speedgatz, Synergy, Kaba

Inline Fans

Air Quantity : 250 CFM

Air Quantity : 300 CFM

Air Quantity : 400 CFM

Air Quantity : 500 CFM

Air Quantity : 600 CFM

Plastic Propeller Fans

Air Quantity : 100 CFM

Air Quantity : 150 CFM

AXIAL FLOW FANS

Duty: Lift Well Pressurisation

Duty: Lift Lobby Pressurisation

Duty : Stair case pressurisation

Duty: Normal & Smoke Exhaust for Basement

Duty: Normal & Fresh Air in case of fire for Basement

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaust for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaust for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaus for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaus for Corridor

CONTROL & TRANSMISSION WIRING

Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for transmission

Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for remotes

DRAIN PIPING

25 mm dia

32 mm dia

REFNET (Y-JOINT )

Supply,installation,testing and commissioning of Y - Joints with necessary fittings as per specification.

VRV/VRF Central Controller for Indoor & Outdoor Units

Supplying, installing, testing and commissioning of Fresh Air powder coated Anodized extruded aluminium construction fresh air louvers (50 mm deep) (Fresh air louver with VCD , bird screen & rattle-free) complete as per specification.

Supplying, installing, testing and commissioning of Exhaust Air powder coated Anodized extruded aluminium construction fresh air louvers (50 mm deep) air louver without VCD , bird screen & rattle-free)complete as per specification.

Supply,installation and testing of double layer flexible duct connector consisting of a flame retardant fabric secured to extruded aluminium frame on both sides to provide a wear resistant airtight flexible connection. Fabric shall be mildew resistant, water proof and silicon impregnated.Flexible connector shall be supplied in accordance with the specifications and drawings.

MAIN HVAC PANEL

OUT DOOR PANEL

VENTILATION PANEL

SITC of high-performance passive constant curvature line array loudspeaker system of approved makes comprising a two-way passive design suitable for professional auditorium and installation applications. The enclosure shall consist of one 12” low-frequency/mid-frequency transducer (minimum 2.5” voice coil) employing advanced cooling technology, and a high-frequency section with custom Multidriver waveguide system incorporating a 1.4” exit compression driver with aluminium voice coil and titanium diaphragm, ensuring high intelligibility and consistent dispersion; the system shall provide a frequency range of 60 Hz – 20 kHz (-10 dB) and frequency response of 70 Hz – 18 kHz (±3 dB) with maximum SPL output exceeding 129 dB (LF) and 140 dB (HF), delivering high output capability suitable for medium to large auditoriums.The loudspeaker shall offer nominal coverage of 100° horizontal × 18° vertical, enabling precise audience coverage and array formation, and shall be acoustically optimized for use in arrays of up to 4 enclosures per vertical array, ensuring phase coherence and uniform sound distribution across the listening area ; the system shall have nominal impedance of 8 ohms (LF section) and shall support power handling of minimum 500W AES, 1000W program and 2000W peak (LF), suitable for use with external professional amplifiers; the enclosure shall include 2 × Neutrik NL4 connectors for input and link connections and shall support bi-amp or passive operation through appropriate processing.The cabinet shall be constructed from high-grade 15 mm birch plywood with durable polyurea coating for long-term reliability, and shall include a heavy-duty front grille with acoustic fabric backing for driver protection; the system shall incorporate integrated rigging hardware with adjustable splay angles (0°–6°) allowing flexible vertical array configuration, and shall be supplied complete with compatible flying frame, rigging accessories and mounting hardware for safe installation ; the loudspeaker shall be suitable for fixed installations, auditoriums, theatres and live performance venues, and shall be supplied complete with all necessary accessories, cabling interfaces and manufacturer authorization on company letterhead. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a compact two-way passive coaxial loudspeaker system suitable for short-throw and background sound reinforcement applications, comprising one 5″ coaxial transducer with a minimum 1.5″ LF voice coil and 1″ HF voice coil, capable of delivering a frequency range of 64 Hz – 20 kHz (-10 dB) and frequency response of 90 Hz – 20 kHz (±3 dB), with a sensitivity of 93 dB (1W@1m), nominal impedance of 16 ohms, and power handling of 150 W AES, 300 W program and 600 W peak, producing a maximum SPL in the range of 114 dB to 120 dB, and providing uniform 70° conical dispersion for consistent coverage; the enclosure shall be of bass-reflex design optimized for clear speech and music reproduction with low distortion, and shall be constructed from 9 mm premium birch plywood with durable Polyurea coating for long-term reliability in indoor installations; the system shall be compact, lightweight, and suitable for both fixed and portable applications, with provision for wall/ceiling mounting accessories; connectivity shall be via 2 × Neutrik Speakon NL4MP connectors; the loudspeaker shall be compatible with high-efficiency external Class-D amplification systems with recommended FIR-based DSP presets available through dedicated system processors, ensuring optimal performance, protection, and tonal consistency; the system shall be optimized for discreet architectural integration while maintaining high intelligibility and balanced frequency response, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: :LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a high-performance passive sub-bass loudspeaker system of approved makes suitable for professional auditorium, theatre and live sound reinforcement applications,the system shall comprise one 18” low-frequency transducer with minimum 4” voice coil, incorporating a high-efficiency neodymium magnet assembly and advanced cooling system for reduced power compression and improved thermal stability, ensuring high output and low distortion performance; the subwoofer shall provide a frequency range of 30 Hz – 140 Hz (-10 dB) and frequency response of 35 Hz – 125 Hz (±3 dB) with maximum SPL of not less than 132 dB, delivering deep and powerful low-frequency reinforcement suitable for medium to large auditoriums.The system shall have nominal impedance of 8 ohms, sensitivity of minimum 98 dB (1W/1m), and power handling capacity of 1200 W AES, 2400 W program and 4800 W peak, suitable for use with high-efficiency external Class-D amplifiers; the enclosure shall provide omnidirectional coverage and shall be optimized for both ground-stacked and flown configurations depending on system design; connectivity shall include 2 × Neutrik NL4-MP connectors for input and link operation, ensuring reliable and flexible system integration.The cabinet shall be constructed from high-grade 15 mm premium birch plywood with heavy-duty internal bracing to minimize resonance and distortion, and finished with durable polyurea coating for long-term reliability in professional environments; the enclosure shall incorporate aerodynamically optimized bass-reflex ports to reduce turbulence and port noise, and shall include a robust front grille with acoustic backing for driver protection; the system shall include integrated flying points and rigging provisions for safe suspension as part of a flown subwoofer array or cluster the subwoofer shall be designed for seamless integration with compatible full-range or line array systems, and shall be driven by dedicated system amplifiers with DSP-based processing including crossover, equalization, delay and protection functions to ensure optimal acoustic performance and system reliability; the unit shall be supplied complete with all necessary accessories, mounting hardware and manufacturer authorization on company letterhead. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of Rigging Frame for line array speakers & Subwoofers. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of wall bracket for fill speakers. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a high-performance self-powered stage monitor loudspeaker system of approved makes suitable for professional stage monitoring applications in auditoriums and live performance venues.The system shall be a two-way active coaxial design, comprising one 12” low-frequency transducer with minimum 3” voice coil and one high-frequency compression driver with minimum 3” voice coil and titanium diaphragm, ensuring coherent point-source performance, high intelligibility and uniform coverage across the monitoring area.The loudspeaker shall provide a frequency range of 60 Hz – 20 kHz (-10 dB) and frequency response of 75 Hz – 18 kHz (±3 dB), with maximum SPL of not less than 129 dB continuous and 132 dB peak, delivering high output capability suitable for stage monitoring of speech, vocals and instruments; the system shall provide nominal coverage of approximately 40° horizontal × 60° vertical, optimized for wedge monitoring applications with controlled dispersion and minimal feedback.The system shall incorporate integrated high-efficiency Class-D bi-amplification with total power of minimum 1500 W (LF: 750 W, HF: 750 W), powered by a switching-mode power supply with Power Factor Correction (PFC), ensuring stable operation over wide voltage ranges; the loudspeaker shall include onboard DSP processing with high internal resolution (minimum 56-bit) and FIR linear phase filtering, providing functions such as equalization, crossover, delay, and comprehensive protection including RMS limiting, peak limiting, thermal protection and system monitoring.The unit shall support analog balanced XLR input with loop-through output, and optional Ethernet connectivity for remote control and monitoring through dedicated software platform; the enclosure shall be constructed from premium 15 mm birch plywood with durable polyurea coating, featuring a robust steel front grille with acoustic backing, ergonomic handles, and wedge-shaped design suitable for stage floor placement; the system shall operate on 230V AC, 50/60 Hz and shall include Neutrik powerCON TRUE1 connectors with looping output, ensuring reliable power connectivity.The loudspeaker shall be suitable for use as stage monitors, side fills or portable reinforcement systems, and shall be supplied complete with all required accessories, cabling and manufacturer authorization on company letterhead, ensuring compliance with project specifications and long-term operational reliability. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a professional four-channel high-power Class-D power amplifier of approved makes suitable for driving line array systems, full-range loudspeakers and subwoofers in auditoriums, open-air theatres and large venue sound reinforcement systems; the amplifier shall be based on Class-D topology with high-efficiency switch-mode power supply (SMPS) and Power Factor Correction (PFC), ensuring high efficiency, reduced heat dissipation and stable performance under varying power conditions;the amplifier shall deliver a minimum output power of 4 × 2500 W @ 8 ohms, 4 × 4000 W @ 4 ohms, and shall support bridged mode operation up to 8000 W per channel, providing sufficient headroom for high-performance loudspeaker systems including line arrays and subwoofers; the unit shall have a frequency response of 20 Hz – 20 kHz (±1 dB) and total harmonic distortion of <0.5%, ensuring accurate and low-distortion audio reproduction;the amplifier shall provide a signal-to-noise ratio of ≥110 dB, high damping factor (>1000), and low crosstalk, ensuring precise low-frequency control and overall audio clarity; the unit shall support adjustable gain and input sensitivity compatible with professional DSP processors and mixing consoles;the system shall include balanced XLR inputs and professional speaker outputs via Neutrik Speakon connectors, ensuring secure and reliable connectivity; the amplifier shall incorporate comprehensive protection features including short circuit protection, thermal protection, overload protection, clip limiting, DC protection and soft-start circuitry, ensuring safe and reliable operation in demanding environments;the amplifier shall feature an integrated DSP (if applicable) with functions such as equalization, crossover, delay, limiter and preset management, enabling optimized system performance; the unit shall include a front-panel display (LCD/TFT) with control interface for monitoring and configuration;the amplifier shall be housed in a compact rack-mountable chassis (typically 1U–2U) with intelligent forced-air cooling system, suitable for continuous operation in indoor and outdoor environments; the unit shall operate on a universal power supply (100–240V AC, 50/60 Hz) and shall be suitable for installation in standard equipment racks;the system shall be supplied complete with all necessary accessories, interconnections and manufacturer authorization on company letterhead, ensuring compliance with project specifications and long-term reliability Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional high-power Class-D power amplifier of approved makes , designed for installation and live sound applications, featuring a high-efficiency switching-mode power supply with active Power Factor Correction (PFC) for reduced mains current consumption and stable operation over a wide voltage range of 100–260V AC, 50/60 Hz; the amplifier shall be available in high-power configurations including 2 × 4500 W, 2 × 3000 W, 1 × 9000 W and 1 × 6000 W, delivering a frequency response of 20 Hz – 20 kHz (±1 dB @ 8 ohms), total harmonic distortion of less than 0.5% at 1 kHz, signal-to-noise ratio greater than 110 dBA, crosstalk exceeding 70 dB (20 Hz – 1 kHz), input impedance of 20 kΩ, and adjustable gain between 32 dB and 41 dB, with a high damping factor greater than 5000 ensuring precise loudspeaker control; the unit shall incorporate comprehensive protection mechanisms including short-circuit, overload, auto-limiting, and AC/DC fault protection for reliable continuous operation; the amplifier shall provide high output power with optimized energy efficiency, with power consumption significantly reduced through PFC technology, and shall be housed in a compact 1U, 19″ rack-mount chassis featuring a front-panel 2″ TFT full-vision IPS color display for monitoring and configuration; the system shall be suitable for driving a wide range of high-performance loudspeaker systems and enable flexible system design with minimal amplifier models, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional high-power Class-D multi-channel power amplifier of approved makes, suitable for installation and live sound reinforcement applications, featuring a high-efficiency switching-mode power supply with active Power Factor Correction (PFC) for reduced current consumption and stable operation over a wide voltage range of 100–260V AC, 50/60 Hz; the amplifier shall be available in 2-channel and 4-channel configurations with output ratings up to 4 × 2500 W, 4 × 1500 W, 2 × 5000 W or 2 × 3000 W, delivering a frequency response of 20 Hz – 20 kHz (±1 dB @ 8 ohms), total harmonic distortion of less than 0.5% at 1 kHz, signal-to-noise ratio greater than 110 dBA, crosstalk exceeding 70 dB (20 Hz – 1 kHz), input impedance of 20 kΩ, adjustable gain between 32 dB and 41 dB, and a high damping factor greater than 5000 for precise loudspeaker control; the unit shall incorporate comprehensive protection circuits including short-circuit, overload, auto-limiting, and AC/DC fault protection, ensuring reliable long-term operation; the amplifier shall be capable of delivering high continuous output power with optimized mains consumption (approximately one-third of output power due to PFC efficiency), and shall be housed in a compact 1U, 19″ rack-mount chassis featuring a front-panel 2″ TFT full-vision IPS color display for monitoring and configuration; the system shall be designed for compatibility with high-performance loudspeaker systems, enabling flexible system configurations with minimal amplifier models, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional digital audio mixing console of approved makes designed for live sound reinforcement, auditorium, and installation applications, featuring advanced 96 kHz XCVI FPGA processing delivering ultra-low latency performance (≤0.7 ms) and high-resolution audio quality, with a minimum of 48 input processing channels, 36 buses, 12 stereo mixes plus LR, and 3 stereo matrices, along with 8 internal stereo FX engines with dedicated returns; the console shall provide a minimum of 24 onboard mic/line inputs (XLR) with recallable preamps and phantom power, additional stereo line inputs, and at least 16 balanced XLR outputs along with AES digital output, and shall support flexible routing and patching across all inputs and outputs; the system shall include comprehensive channel processing with 4-band fully parametric EQ, high-pass filters, gate, compressor, delay, and graphic EQ options on mixes, along with automatic microphone mixing capability; the control surface shall incorporate a minimum of 25 motorized faders arranged across multiple layers, a 7-inch capacitive color touchscreen interface, dedicated channel LCD displays, and assignable soft keys for intuitive operation; the console shall support remote control and monitoring via Ethernet using dedicated software and mobile applications, and shall include a built-in 32×32 USB audio interface for multitrack recording and playback along with direct USB recording capability; the system shall be expandable via SLink port for connection to remote stage boxes and shall include a 64×64 I/O expansion slot supporting audio networking protocols such as Dante, Waves, or MADI; the unit shall be housed in a robust chassis suitable for professional touring and fixed installations, and shall be supplied complete with all necessary accessories, software, and manufacturer authorization on company letterhead. Approved Make: Behringer / Yamaha / Allen&Heath

SITC of a professional remote audio expander / stage box of approved makes designed for live sound, auditorium, and installation applications, featuring a minimum of 16 remote-controlled mic/line inputs with high-quality recallable preamps and phantom power, and 8 balanced XLR outputs, operating at 96 kHz sampling rate for high-resolution audio performance with low latency; the unit shall be compatible with digital mixing systems via a single Cat5e/Cat6 connection using a proprietary or standard audio transport protocol (such as SLink), supporting connection to compatible digital mixers and expansion modules with redundant or daisy-chain capability; the stage box shall provide locking XLR connectors, status LEDs for signal and phantom power indication, and robust gain control and preamp recall from the connected console; the enclosure shall be of rugged construction suitable for stage floor or rack mounting, with provision for wall or stage installation, and shall be powered via an external PSU or PoE-compatible system as per manufacturer design; the unit shall support flexible placement on stage, minimizing analog cable runs and improving system noise performance; the system shall be suitable for integration in professional audio networks and shall be supplied complete with required power supply, mounting accessories, and manufacturer authorization on company letterhead.Make: Yamaha/Allen & Heath/Klark Teknik

SITC of a professional digital loudspeaker management system / DSP processor of approved makes featuring 4 analog inputs with additional AES3 digital input and 8 balanced XLR outputs, designed for high-performance sound system processing with support for input levels up to +24 dBu and a dynamic range of minimum 121 dB; the unit shall incorporate high-resolution AD/DA conversion with 32-bit converters and DSP processing with 64-bit double precision at 48 kHz, ensuring superior audio quality, low distortion, and accurate signal handling, with overall system latency not exceeding approximately 1.2 ms; the processor shall include advanced FIR linear phase filtering with up to 1000 taps per output channel, along with independent phase equalization capability and auto-equalization features allowing replication or matching of target response curves, including magnitude and phase adjustments; the system shall provide comprehensive equalization options including high-pass, low-pass, and multiple parametric EQ bands across input and output channels, along with configurable crossover filters (Linkwitz-Riley, Butterworth, Bessel up to 48 dB/oct), delay up to minimum 200 ms, and full matrix routing with simple, basic, and advanced (mixer mode) configurations; dynamics processing shall include dual-stage protection with RMS limiter-compressor (threshold in watts) and peak limiter (threshold in volts) per output channel, ensuring optimal transducer protection and performance; the unit shall support extensive preset management with storage capacity of up to 999 user, snapshot, and system presets, and shall offer control and monitoring via Ethernet and USB through dedicated software platform with features such as grouping, copy/paste, EQ import/export, and integration with measurement systems; the hardware shall be housed in a standard 19″ rack-mount chassis (1U), powered via universal switching power supply (85–240V AC, 40–400 Hz), with front panel IPS color display, encoder, and dedicated control buttons, and shall be suitable for fixed and touring applications, complete with manufacturer authorization on company letterhead and all necessary accessories and documentation. Approved Make:Extron/Lynxpro/BIAMP

SITC of Digital Wireless headset mic ; polar pattern: cardioid;pre-polarized condensor microphone;Audio frequency response: 20Hz-20KHz;Sound pressure level: 150 dB SPL;Sensitivity:1.6 mV/Pa;complete with all accessories as required. Approved Make: Sennheiser/ Shure/ DPA

SITC of set of antenna system set with 2 nos of antennas, antenna splitter, antenna cables . The antenna should be of same OEM as of microphones .System should be complete with all accessorie Approved Make: Sennheiser/ Shure/ DPA

SITC of Dynamic cardioid microphone with on/off switch for speech and vocals,frequency response 45 Hz- 16KHZ or better, nominal impedence 350 ohm or better,feedback rejection, rugged metal housing complete with all accessories Approved Make: Sennheiser/ Shure/ DPA

Supply and installation of drum kit with 7 microphone set Approved Make: Sennheiser/ Shure/ DPA

SITC of Professional installation projector featuring a bright single-chip DLP laser phosphor light engine with a native WUXGA (1,920 × 1,200) resolution and up to approximately 11,000 ANSI lumens brightness for clear, high-impact image projection. The projector supports 16:10 aspect ratio and delivers strong contrast performance with both sequential and dynamic contrast control for vibrant visuals and detail in diverse lighting conditions. A laser phosphor light source provides up to 20,000 hours of service life with low maintenance compared to traditional lamp-based designs, and constant light output (CLO) ensures uniform brightness over time. Connectivity includes multiple digital inputs such as 2× HDMI 2.0, 1× DVI-D, HDBaseT, and 3G-SDI, plus network control over RJ45, facilitating flexible integration with AV systems; support for 4K input signals (scaled to WUXGA) and active stereoscopic 3D capability expands usage across varied content formats. Installation flexibility is enhanced with wide optical lens shift, motorized zoom and focus, and compatibility with a range of interchangeable G-lenses. The projector is built for 360° orientation, supports embedded warp and blend via management tools, and offers low audible noise (~35–39 dB). Typical power input 100–240 V AC, robust casing and network control options make it suitable for conference halls, auditoriums, houses of worship, museums, and immersive environments where reliable, high-quality projection is required. Approved Make: Optoma / Panasonic / Barco

SITC of a heavy-duty motorised projection screen of approved makes designed for large venue applications including auditoriums, theatres, and convention halls, having a diagonal size of 371"(26 feet x 16 feet) in 16:10 aspect ratio, comprising a high-quality matte white projection surface with nominal gain of 1.0 ensuring uniform brightness, wide viewing angles, and accurate colour reproduction suitable for high-lumen laser projectors; the screen fabric shall be seamless or precision-joined with minimal visible joints, flame-retardant and mildew-resistant, and shall provide a smooth, flat viewing surface supported by tab-tensioning or equivalent system to prevent wrinkles and edge curling; the screen shall be housed in a robust heavy-gauge aluminium/steel casing with durable powder-coated finish, designed for ceiling or wall mounting, and shall incorporate a high-torque, low-noise tubular motor with smooth and reliable up/down operation, complete with limit switches for precise positioning; the system shall support multiple control options including wall switch, RF/IR remote, and dry contact/relay interface compatible with AV control systems, with provision for integration into centralized control platforms; the installation shall include all necessary mounting brackets, suspension hardware, power cabling, and control accessories, and shall be executed with proper alignment, leveling, and commissioning to ensure optimal screen flatness and performance; the system shall be suitable for continuous operation in professional environments and shall be supplied complete with manufacturer authorization on company letterhead along with warranty and all required documentation. Approved Make: Da-Lite / Draper / VAV/Telone

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

Supply, Installation, Testing & Commissioning of customised display mount for above displays

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

Supply, Installation, Testing & Commissioning of AI based Full 4K @ 60fps Presenter PTZ Tracking Camera with Dual Camera- one PTZ Camera for Presenter Tracking and second fixed lens Panoramic Camera. PTZ Presenter Camera should support min 30X Zoom and 8x Digital Zoom with Panning range of +170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees, Field of View for PTZ Camera should be min 58 Degree and for Panoramic Camera min. 85 Degree, camera should support simultaneous outputs through HDMI, 3G-SDI, USB 3.0 and IP with 1x Audio In and can be controlled via RS232 and IP. Should support multiple video streams with PIP. Tracking Camera should support Everywhere Tracking, Partition Tracking, Auto Framing & Gesture Control. Should support PoE+ and Virtual USB Driver. Quoted model should be BIS, CE, FCC , Clickshare & RoHS Certified with Test Lab Reports. Approved Make: Lumens/ Sony/ Datavideo

SITC of IP+RS 232/VISCA based Joystick Controller SITC of Joystick with 3" LCD for Preview Monitoring, PAN/Tilt/Zoom Control, Communication via IP & RS232C/RS455 Interfaces, Auto Backlit Keys, Should be able to control minimum 200 Cameras on IP & 10 Cameras through RS232/422, Should support VISCA, VISCA Over IP protocols & PoE. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports. Approved Make: Lumens/ Sony/ Datavideo

SITC of a professional 1G AV over IP encoder of approved makes capable of encoding high-quality video and audio signals for transmission over standard IP networks supporting HDMI 2.0 and VGA input interfaces with maximum input resolution up to 4K UHD (4096 × 2160 @ 60Hz, 4:2:0) and delivering encoded output up to 4K @ 30Hz (4:4:4) with visually lossless compression and ultra-low latency performance suitable for real-time applications; the unit shall transmit AV signals over Cat6/6A/7 cabling via Gigabit Ethernet (RJ45) and support multicast streaming enabling one-to-many and many-to-many distribution across multiple decoders without dedicated matrix hardware; the encoder shall support embedded and de-embedded audio, HDMI audio formats including LPCM and bitstream, and shall be compliant with HDCP 2.2 for secure content transmission; the device shall include control interfaces such as RS-232, IR (in/out), and USB for KVM functionality, enabling remote control of source devices over the IP network; the system shall support Power over Ethernet (PoE IEEE 802.3af) as well as external DC power supply for flexible installation, and shall be compatible with centralized control systems for matrix switching, video wall configuration, and system management via intuitive web-based GUI; the encoder shall be housed in a compact, robust metal enclosure suitable for continuous professional use in auditoriums, command centers, and broadcast environments, with low power consumption (approx. 7–10W) and reliable operation in typical indoor conditions, complete with all required accessories and manufacturer authorization on company letterhead. Approved Make: Crestron/AMX/Lumens

SITC of a professional 1G AV over IP decoder of approved makes capable of decoding high-quality video, audio and control signals over standard IP networks supporting HDMI 2.0 output with maximum resolution up to 4K UHD (4096 × 2160 @ 30Hz, 4:4:4) and 4K@60Hz (4:2:0), delivering visually lossless video with ultra-low latency suitable for real-time applications; the unit shall receive AV streams via Gigabit Ethernet (RJ45) over Cat6/6A/7 cabling and support multicast streaming enabling one-to-many and many-to-many AV distribution without dedicated matrix hardware; the decoder shall include multiple outputs including HDMI and VGA for display connectivity, along with digital (S/PDIF) and analog stereo audio outputs, and shall support HDMI audio formats including LPCM and bitstream; the system shall provide USB over IP functionality with minimum 2 × USB 2.0 and additional USB ports for keyboard, mouse and peripheral connectivity enabling full KVM control of remote computers, along with RS-232, IR (in/out) interfaces for device control and integration with third-party control systems; the decoder shall support HDCP 2.2 compliant content, built-in scaling and frame rate conversion to ensure compatibility with different display resolutions, and shall allow creation of video walls with portrait and landscape orientation; the unit shall support Power over Ethernet (PoE) as well as external power supply, with low power consumption and reliable operation, and shall be configurable via web-based GUI with compatibility for third-party control platforms; the device shall be housed in a compact, robust enclosure suitable for continuous professional use in auditoriums, control rooms and AV installations, and shall be supplied complete with all necessary accessories and manufacturer authorization on company letterhead. Approved Make: Crestron/AMX/Lumens

SITC of a centralized AV over IP system controller of approved makes designed for management and control of distributed AV over IP systems capable of controlling multiple encoders and decoders over standard IP networks enabling flexible matrix switching, video wall creation, and KVM functionality from a single interface; the controller shall support centralized management of AV streams with the ability to route any input source to any display output through an intuitive web-based graphical user interface (GUI) with drag-and-drop functionality, real-time preview, and customizable layouts, supporting group control, macro commands, scheduling, and automation features for seamless operation , the system shall include dual Ethernet ports (dedicated control and AV network), HDMI output for monitoring, USB interface for KVM control, RS-232, IR and trigger ports for integration with external devices and third-party control systems; the controller shall support Power over Ethernet (PoE IEEE 802.3af) as well as external DC power supply with low power consumption (approx. 3W), and shall be capable of operating in conjunction with AV over IP encoders and decoders to enable scalable, low-latency video distribution across multiple zones , the unit shall be housed in a compact, robust metal enclosure suitable for continuous professional operation in auditoriums, control rooms, and enterprise environments, and shall be supplied complete with all required accessories, software, and manufacturer authorization on company letterhead.Approved Make: Crestron/AMX/Lumens

SITC of a professional all-in-one portable video production and streaming system of approved makes comprising a 12-channel HD digital video switcher integrated within a hand-carry portable suitcase unit, supporting video formats 1080p, 1080i and 720p, designed for live production, streaming and recording applications; the system shall provide a minimum of 12 video inputs including 8 × 3G-SDI and 4 × HDMI inputs supporting resolutions up to 1080p50/60, and a minimum of 9 video outputs including 5 × SDI assignable outputs, 1 × HDMI assignable output and 3 × HDMI program outputs, with flexible crosspoint (XPT) assignment; the switcher shall support advanced video processing features including MIX, CUT, WIPE transitions (minimum 32 patterns), DVE effects, minimum 4 upstream keyers (USK) with chroma key capability, minimum 2 downstream keyers (DSK) with key and fill, and multi-window display capability with up to 8 Picture-in-Picture (PiP) layers including flexible source assignment; the system shall include an integrated character generator (CG) interface (such as CG-200 or equivalent) supporting insertion of static and animated graphics/logos (minimum 2 configurable layers), lower thirds, titles and overlays, and shall support advanced transitions including stinger transitions suitable for live events and sports applications; the unit shall incorporate a built-in minimum 17.3-inch Full HD monitor for multiview and preview/program monitoring, along with an integrated H.264 hardware streaming encoder and recorder capable of simultaneous live streaming and recording over IP networks and local storage; the system shall support audio embedding/de-embedding, multi-channel audio mixing, and synchronization with video inputs, and shall provide control via built-in panel, external control interfaces and network-based management; the unit shall be housed in a rugged portable enclosure suitable for field and auditorium use, with reliable power supply, efficient cooling, and continuous operation capability, complete with all required accessories, cabling and manufacturer authorization on company letterhead.Approved Make:Blackmagic Design/Datavideo/AIDA

SITC of Customised Metallic house structure, powder coated with caster wheels & brakes. Drawer for keyboard, mouse and document camera. Wooden Top Tray for placing document & Laptop. All drawers sliding tray and doors should be Lockable. External Connectivity: Cablecubby provision Having 1 X USB A,1 X C-USB,1 HDMI IN,Power Socket with ON/OFF. One MIC XLR for microphone; Motorized tilting adjustment for chainging viewing angle. Minimum 6 Universal rating 5 Amp Socket. Provision to fix Logo space at the front side. Provision of 19"inch Rack inside podium to fit in international standerd equipment. Access doors for servicing both from front and back side of the podium. Wire manager on left & right side and at bottom for flexibility of managing additional wire/wiring. ( FULL HD ) 22”LCD Tablet Monitor with Resolution 1920 x 1080 . View Area 476.64(H) x 268.11(V)mm – 22 inch. Luminance ,White 250 cd/㎡. Colour : 16.7M, Dynamic Contrast Ratio 50,000:1 . Viewing Angle 85˚+85˚H and 80˚+80˚ V. Lamp Life Time 20,000 Hrs (min ). Technology Electromagnetic Resonance. Detectable Height 3~10mm. Position Report Rate 138pps. Pressure Resolution 1024 Level. CapacitiveTouch Technology:Projected Capacitive. Detacted object Fingers, or Conductive material. Tracking speed : 133<-/Capacitive single :100:Multy:95. Accuracy : +-0.5mm /+-3mm (Edge)3mm wide. Detect height 0-10mm. Touch Points 10 Points.Approved Make: UNI/AHA/VACOM

Floor Box:- Supply, Installation, Testing & Commissioning of Floor BOX with Power/LAN/XLR Connectivity Approved Make:Ahuja/VAV/Custom

Floor Box:- Floor Box : 4 x XLR Point Input Stage / Floor Box Approved Make:Ahuja/VAV/Custom

Floor Box:- Floor Box : 2 x XLR Point Input Stage / Floor Box Approved Make:Ahuja/VAV/Custom

SITC of Integrated Controller, Dual Network Interface card, Should support IPv6 ,Should Supports IEEE Standard for Port-based Network Access Control with the ability to grant or deny network access to devices wishing to attach to a LAN based on credentials tied to the device rather than to a user ,Should have High Performance Architecture, Flexible Programming Platform (Java) ,Should have ability to manage secure port TLS and SSH communications with a remote device or server Enhanced Diagnostics On Serial and IR Ports ,Hardware / Software should be Built for 24/7/365 Operation ,Should have Ultra-Fast 1600 MIPS processor , 512 MB Onboard RAM , 1 M Non-Volatile Memory, 8 GB SDHC FLASH Memory ,1 RU Rack Space ,10/100 LAN Interface ,4 Digital I/O Ports , 1 RS-232/422/485 Port , 3 RS-232-Only Ports , 4 IR/Serial Output Ports , 4 Relay Ports ,Regulatory Compliance :RoHS ,WEEE.Approved Makes AMX/EXTRON/CYPRESS

SITC of 10.1”Table Top Touch Panel ;Display Size 10.1” Diagonal;Display Type TFT-LCD, IPS;Resolution:1920x1200;Aspect Ratio:16:10 landscape;Brightness 350 nits (cd/m2);Contrast Ratio >800:1;Illumination: LED backlight;Touch Overlay:Capacitive touch; >5 points touch panel with palm rejection and wet finger operation. Anti-fingerprint; Anti-microbial coating;RAM:4GB, LPDDR4;Storage:16 GB eMMC;RJ-45, POE 802.3af, 15.4W;USB Type C OTG, USB Type 2.0;Camera:5MP front-facing, with Fixed Focusing Lens;Speakers:2 x 2W;POE:RJ-45, POE 802.3af, 15.4W Approved Makes AMX/EXTRON/CYPRESS

SITC of i7 PC with 16GB RAM, 500 GB SSD .For Soft VC and Operation.Approved Make: Dell/HP/Acer

SITC of Wireless Access Point.Should have one 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink™ (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Should have Internal antenna 3.8/4.5dBi (2.4GHz/5GHz).Should have standards IEEE 802.11AX,IEEE 802.11ac,IEE 802.11n standard, 2.4GHz and 5GHz,WMM - Wireless MultiMedia Prioritization,WDS- Wireless Distribution System,Power over Ethernet (PoE) IEEE 802.3af/802.3at.Should have security features like Wi-Fi Protected Access (WPA3),SSL,Wireless access control to identify authorized wireless network devices,MAC address filtering with access control,Basic Service Set Coloring (BSS Coloring),Security Socket Layer (SSL) remote management login.Should have Remote configuration and management feature through Web browser, SNMP or Telnet. setup, monitoring and management through Standalone, Software\ Cloud based controller and Mobile App. Manageability As standalone and If software\ Cloud based controller than 5 years cloud licence should be including without extra charges. Should have advance wireless features like OFDM/OFDMA, Wireless backhaul to form Mesh Network,Bridge mode: Point-to-multipoint wireless WDS mode, Adjustable Transmit Power Control (TPC) Device detection.PoE power consumption should not be more than 25.5W Watts.Bandsteering, Guest Network/Captive Portal, Bandwidth management, Link Layer Discovery Protocol.Target Wake Time (TWT) feature.Block SSID Broadcast feature.can be Ceiling mounting/ Wall mounting.Should be from the same OEM as Ethernet switch.No repair products & replacement with New box.Lifetime free latest firmware support. Approved Make: Dlink/ Netgear/ Cisco

SITC of a fully managed AV over IP network switch of approved makes specifically designed for professional audio-visual applications comprising 24 × 10/100/1000 Mbps RJ45 PoE+ ports (IEEE 802.3at) with minimum 30W per port and a total PoE power budget of 300W, along with 2 × additional Gigabit RJ45 uplink ports and 4 × SFP fiber uplink ports for flexible connectivity; the switch shall support Layer 2 and Layer 3 switching features including VLAN, QoS, Link Aggregation (LAG), IGMP snooping/multicast management, DHCP server, IPv4/IPv6 support, and advanced security features such as DHCP snooping, RADIUS authentication and storm control; the unit shall be optimized for AV over IP applications with built-in IGMP Plus™ for automatic multicast configuration, pre-configured AV profiles for common protocols such as Dante, AES67, NDI, NVX, AMX, Q-SYS and similar systems, and shall provide a dedicated AV-friendly graphical user interface (GUI) in addition to standard IT management interfaces (Web GUI, CLI, SNMP, SSH); the switch shall support high performance with switching capacity of minimum 60 Gbps and forwarding rate of approximately 44.64 Mpps, along with jumbo frame support up to 12 KB and MAC address table size of minimum 16K entries; the device shall include USB ports for management, console interfaces, internal power supply, and support Power over Ethernet distribution for AV endpoints such as encoders and decoders; the unit shall be housed in a 1U rack-mountable chassis with rear-facing ports for clean AV rack integration, low-noise cooling (~34 dB) suitable for control room environments, and shall operate on standard AC power with maximum consumption around 400W under full load; the switch shall be supplied complete with rack mounting accessories, cables, and manufacturer authorization on company letterhead, and shall be suitable for continuous operation in professional AV installations such as auditoriums, command centers and broadcast environments. Approved Make: Dlink/ Netgear/ Cisco

Supply, Installation, Testing & Commissioning of Cables & connectors(Speakers,Audio,Cat x, hdmi etc) for connecting the entire AV equipment of Auditorium, Conference Room & Lobby Make: Falcon/Stecker/Dlink/Digisol/MX/Linetech

SITC of camera wall mount metal stand. It should be constructed with durable material and can be attached right side up or upside down, depending on camera configuration and requirment. OEM accessory will give a perfect fit and features pre-drilled installation hardware and cable holes. Make: Custom

SITC of 42U Floor standing rack with caster wheels. It should have cable entry from top and bottom.Should have front glass door with lock.Should have threeshelf tray.(1U/255mmD),PDU6x5Amp,Fan 90CFM,Mounting hardware(Packet of 10). Make: Prinet/Dynamic/APW president

SITC of professional monitoring headphones with linear sound reproduction, folding and rotating earcupes, frequecy response 10 Hz - 22 KHz or better,max SPL 112 dB or more complete with all accessories Make:Sennheiser/ Shure/ DPA

SITC of tall adjustable microphone stands with tripod base complete with all accessories as required. Make: Ahuja / hercules / i&A stands

SITC of Short stands complete with all accessories as required.Make: Ahuja / hercules / i&A stands

SITC of Active DI Boxes for electronic instruments Powered by +48 V phantom power with a 9 V battery backup Signal levels ranging from +10 to +50 dBu Frequency response from 10 Hz to 90 kHz (±3 dB) Earth Lift Switch.Make: BSS/Behringer/Klark Teknik

SITC of LED PAR light comprising RGBW LED source, beam angle 15°–30°, suitable for side lighting and effect lighting applications, with smooth dimming, DMX512 control, die-cast aluminium housing, and flicker-free operation.Make: ASL/Equivalent

SITC of professional LED Cyc light / asymmetric wall washer designed for uniform illumination of cyclorama, comprising RGBW or RGBA LED source (minimum 150W), wide asymmetric beam distribution for even top/bottom coverage, high color mixing capability, smooth dimming (0–100%), flicke.Make: ASL/Equivalent

SITC of professional moving head light comprising minimum 250W–300W LED source, with motorized pan/tilt, zoom function, color wheel, rotating gobos, prism effects, smooth dimming (0–100%), strobe effects, DMX512 control, multiple operational modes, LCD display, and flicker-free operation suitable for auditorium stage lighting and event applications. Make: ASL/Equivalent

SITC of professional digital lighting control console supporting minimum 512 DMX channels (expandable), control of intelligent fixtures, scene-based programming, minimum 200 scene memory, playback faders, chase functions, dimmer and RGB/RGBW control, intuitive user interface, USB/Ethernet connectivity, backup capability, and standalone operation.Make: Pearl/Equivalent

SITC of DMX splitter with minimum 1 input and 4–8 optically isolated outputs, ensuring signal integrity and protection for lighting network, complete with connectors and termination support.

SITC of dedicated 3-phase lighting distribution panel, fabricated from MS sheet, powder coated, comprising MCCB/MCB protection, phase balancing, individual outgoing circuits for lighting fixtures, RYB indication, voltmeter/ammeter, earthing provision, and suitable for stage lighting load distribution.

SITC of Cable Tray of size 40x75x40mm with 1.6 mm thickness

SITC of Light socket box 4"x4" with 15 Amp multi socket

SITC of C Clamp

SITC of safety chain

SITC of lighting bars fabricated from MS pipe (minimum 40 NB), powder coated black, complete with suspension system, clamps and supports, suitable for mounting lighting fixtures at FOH and stage positions, with adequate load-bearing capacity.

SITC of DMX signal cable (shielded twisted pair) with connectors, termination, testing and commissioning for complete lighting system.

SITC of power cabling for lighting fixtures including connectors, distribution boxes and termination.

SITC of XLR connectors as required

SITC of motorized main stage curtain made of high-quality fire-retardant velvet fabric (minimum 350 GSM) conforming to NFPA 701 / BS 5867 standards, in approved colour, with horizontal traveler arrangement; complete with heavy-duty straight drapery track of open frame design, fabricated from powder-coated steel, supported on suitable brackets; curtain runners with nylon wheels and oil-impregnated bearings for smooth operation; master carriers with steel cable arrangement (minimum 3 mm dia), end stops, pulleys, and track accessories including joining plates, overlap carriers and guides; complete with motorized drive system (minimum 1.5 HP, 3-phase or suitable single phase as per design) with reduction gearbox, limit switches for open/close positions, and control through wall-mounted push button station (open/close/stop) and control panel; curtain shall be double pleated with minimum 900 mm center overlap; complete in all respects including installation, testing and commissioning as per site requirements.Width-44m(approx),Height-8m(Approx)

SITC of main valance made of same fire-retardant fabric as main curtain, stitched in 1:2 pleating, complete with cotton dori, eyelets and mounting arrangement using suitable MS pipe (minimum 25 mm dia) painted black; fixed above proscenium opening to conceal curtain track and lighting fixtures, complete with all accessories and installation as per drawings.Width : approx 22 to 24 m ; height :1.2 m to 1.5 m

SITC of stage border curtains made of fire-retardant black crepe fabric (minimum 280–300 GSM), stitched in 1:2 pleating, complete with mounting arrangement using MS pipes (minimum 25 mm dia) painted black, suitable for installation above stage at multiple levels for masking of lighting fixtures and rigging; complete with all accessories and installation.

SITC of Stage Legs (Side Wing Curtains) made of fire-retardant black velour/crepe fabric (minimum 300 GSM) complying with NFPA 701 / BS 5867, stitched with 1:1.5–1:2 fullness, complete with reinforced header, eyelets, bottom pipe pocket, heavy-duty manual track system with runners, carriers, MS support pipe, clamps, brackets and all accessories; installed in multiple rows on both sides of stage with proper overlap and alignment; complete installation, testing and commissioning as per approved drawings and site conditions.Height: 8.0 m (± site condition);Width per leg: 2.5 m to 3.0 m;Overlap: Minimum 150–300 mm between adjacent legs

SITC of rear blackout curtain made of fire-retardant black fabric (minimum 300 GSM) with horizontal sliding arrangement, complete with heavy-duty drapery track, runners, master carriers, steel cable system, pulleys and accessories similar to main curtain; complete with motorized operation (minimum 1.5 HP motor) with limit switches and control panel; curtain to be double pleated with minimum 900 mm overlap; complete installation, testing and commissioning as per site conditions.

SITC of side ladders (lighting booms) fabricated from MS rectangular tubes (minimum 50 × 25 mm, 16G) welded construction, finished with black powder coating, complete with mounting clamps, base plates and provisions for fixing stage lighting fixtures at multiple heights; complete installation as per stage design.

SITC of stage valance support bar fabricated from MS pipe (minimum 40 NB / 48 OD) in dual barrel configuration, painted black, suitable for supporting front valance and masking curtains, complete with suspension system, clamps and accessories; installed as per approved drawings.

SITC of cyclorama system comprising supply and installation of seamless white cyclorama fabric (matte finish, fire-retardant, minimum 300 GSM) suitable for projection and stage lighting applications, stretched over a rigid MS frame fabricated from MS pipes (minimum 40 mm dia) and MS angles (minimum 35 × 35 × 5 mm), properly anchored to wall/floor with holdfasts; frame to be painted with red oxide primer and black finish paint; fabric to be fixed with uniform tension using suitable fastening system (velcro/dori/track as required); complete installation ensuring wrinkle-free surface for uniform projection and lighting effects.Width- approx 26 m, Height- apporox 6 m

SITC of motor control panel for stage curtain system, fabricated from MS sheet with powder-coated finish, comprising contactors, overload protection, MCB/MCCB, limit switch integration, push button stations (open/close/stop), emergency stop, phase indication (RYB), power indication, internal wiring and terminal blocks; suitable for safe operation of curtain motors and integrated with stage electrical system; complete installation, testing and commissioning.

Supplying, and placing in position of sofa of Durian Make - Berry/55001 as per Image .classic Contemporary design and slender curves. . The Sofa of stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa. Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Leatherette, the sofa makes a fantastic first impression. The Cushioning is moulded such that it flows along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa The seat cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyester poly fill outer layer of 200 gsm. The polyester poly fill keeps the upholstery wrinkle free & soft. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, GREEN PRO / GREEN GUARD Certification, AIOTA Certification, BIFMA Certification, GRIHA Certification and from the approved make of Durian, Godrej, HNI, Rockworth, Haworth, Featherlite, Fabteq, Geeken. The product should be as per above given specification under the guidance of project architect & Engineer in charge. 1 seaterDimension (W)1905mm X (D)890mm X (H)870mm

Supplying, and placing in position of main Table as per Image/ drawing of Fabteq make - FS-711 (Model No.).The Table top made out of 32mm thk prelam particle board with 2mm thk pvc edge banding & side panel & modesty panel made up of 25mm thick pre-laminated particle board .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & central Locking arrangement. The table have a provision of free standing Side Storage of size 1200mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having a provision of 3 drawer unit, one openable shutter with D shape handle & central locking arrangement, one open storage with shelf in it . The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, GREEN PRO / GREEN GUARD Certification, AIOTA Certification, BIFMA Certification, GRIHA Certification and from the approved make of Durian, Godrej, HNI, Rockworth, Haworth, Featherlite, Fabteq, Geeken. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Providing and fixing 9 " long and 20mm thick and 50 mm depth grouted on the wall MS powder coated lettering for front gate with following lettering " Ustad Bismillah Khan Sangeet Mahavidyalay, Dumraon, Buxar ."

Amount of EMD (In Rs-):-92,65,500/-

Time of Completion:-17 Months

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

a) All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

All kinds of soil.

Supplying chemical emulsion in sealed containers including delivery as specified.

Chlorpyriphos/Lindone emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termites' treatrnent(including the cost of chemical emulsion)

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor.

With Chlorpyriphos EC 20% with 1% concentration

Extra for every additional lift of 1.5 m or part thereof in :

Ali kinds of soil.

Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead.

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

1:3:6 (1 Cement; 3 coarse sand :6 graded stone aggregate 40 mm nominal size)

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments,pillars,post.struts,buttresses, string or lacing courses,parapets, coping,bed blocks, anchor blocks, plin window sills, fillets etc. upt floor five level excluding the cost of centring,shuttering and finishing:

1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4(1cement:2:2 coarse sand :4 graded stone aggregate 20mm nominal size)

Extra for providing and mixing water prooding material in cement concrete work in the proportion recommended by the manufacturers.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg. per square metre on damp oroof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Extra for concrete work in superstructure above floor V level for each four floors of part thereof.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

All works upto Plinth level

Concrete of M-30 grade with minimum cement content of 350 kg/cum

All works above plinth level upto floor V level

Concrete of M-30 grade with minimum cement content of 350 kg/cum

Extra for RCC work in superstructure above floor V level for each four floors or part thereof.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia.

Thermo-Mechanically Treated bars TMTC-500-12mm dia.

Thermo-Mechanically Treated bars TMT Fe-500-I6mrn dia.

Thermo-Mechanically Treated bars TMT Fe-500-20mm dia.

Thermo-Mechanically Treated bars TMT Fe-500-25rnm dia

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundation, footing, bases of columns etc. for mass concrete

Suspended floors, roofs, landings, balconies, and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Stairs, (excluding landings) except spiral-staircases.

Weather shades. Chajjas, corbels etc., including edges

Columns, Pillars, Piers, Abutments, Posts and Struts

Shelves

Edges of slabs and breaks in floors and walls

Under 20cm wide

Small lintels not exceeding 1.5 m clear span, mouldings as in cornoces, window sills, string, courses, bands, copings, bed plates, anchor blocks and the like.

Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).

Suspended floors, roofs, landings, beams and balconies (Plan area to be measured)

Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.

200 mm wide.

Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge .(Material shall confirm to ASTM 6063).

Floor Joint of 100 mm gap.

Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-InCharge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).

Wall Joint of 100 mm gap.

Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self-centering arrangement that freely rotates / moves in all directions.The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.

Roof Joint of 100 mm gap.

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :

a) Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with bricks of class designation100A in foundations and plinth in :

Cement mortar 1:4 (1 cement: 4 coarse send)

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in Extra for Brick work in superstructure above plinth level upto floor V

Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level.

Cement mortar 1:4 (1 cement: 4 coarse send)

Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks)

Extra for brick work in superstructure above floor V level for each four floors or part there of.

Extra for half brick masonry in superstructure. Above floor V level for every four floors or part there o

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, edge moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab upto 0.50 sqm

Area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing 75 mm high, 50 mm deep and 18 mm thick stone slab table rubbed, edges rounded and polished, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Granite Stone of approved shade

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality

1.0 mm thick

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to measured)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to steel windows by welding

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/cum. The frame will have a provision of G.I. anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge . (Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes fire rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/sqm) duly filled mineral wool insulation having density minimum 96 kg/cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for seperately).

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Providing and fixing Stainless steel satin finish SS 304 grade Tower Bolts SS screws for wooden doors of approved make and model all complete as per the directions of Engineer-in-charge

Providing and fixing Stainless steel satin finish SS 304 grade Handles with SS screws for wooden doors of approved make and model all complete as per the directions of Engineer-in-charge

Providing and fixing carbon steel galvanised ( minimum coating 5 micron ) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve,including drilling of hole in frame , concrete/ masonry, etc.as per direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position andapplying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works.

Structural steel work riveted or bolted in built up sections, trusess and framed work, including cutting,hoisting,fixing in position and applying a priming coat of approved ateef primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Hot finished seamless type tubes

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Extra for providing mechanical device chain and crank operation for operating rolling shutters.

Exceeding 10.00 sqm and upto 16.80 sqm in the area

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Using M.S. angels 40x40x6 mm for diagonal braces

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab.

Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length

Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with:

Udaipur green marble

Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

Size of Tile 600 x 600 mm.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

Size of Tile 600 x 600 mm.

Mirror polishing on marble work/stone work where ever required to give high gloss finish complete.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement3

18 mm thick

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand) :

25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

52 mm thick cement concrete flooring with metallic concrete hardener topping under layer 40 mm thick cement concrete 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick metallic concrete hardener consisting of mix 1:2 (1 cement hardener mix:2 stone aggregate 6 mm nominal size) by volume @ 2 liter per 50 kg of cement or as per manufacture specification. This includes cost of cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3(1 cement::3 coarse sand)as per standard design

In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-(Part I) :2011 (Board with BIS certification marks)

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60)

12 mm cement plaster of mix :

1:6 (1 cement : 6 coarse sand)

6 mm cement plaster of mix:

1:3 (1 cement : 3 fine sand)

18 mm cement plaster in two coat under layer 12 mm thick cement plaster 1:5 (1 cement: 5 course sand) and a top layer 6mm thick cement plaster 1:3(1 cement: 3 coarse sand finiished rough with sponge

Extra for plastering exterior walls of height more than 10m form ground level for every additional height of 3 m or part there of

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade .

New work (two or more coats ) over and including priming coat with cement primer

Distempering with dry distemper of approved brand and manufacture (two or more coats ) and of required shade on new work , over and including priming coat of whiting to give an even shade

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

White washing with whiting to give an even shade :

New work (three or more goats)

Neat cement punning

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5.50 mm thickness

With float glass panes of 8.0 mm thickness

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

Upto 5mm depth and 5mm width

Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.

Powder coated minimum thickness 50 micron aluminium

Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer in-charge

Powder coated minimum thickness 50 micron aluminium

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.

Powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions.(ii) 11 nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) Illrd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) Ivth course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni).

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and laying integral cement based treatment for water . proofing on horizontal surfaces at all levels as directed by Engineerin-charge and consisting of: 1) 1st layer of 20 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement:3 coarse sand) mixed with water proofing compund conforming to IS: 12645 in the recommnded proportion. Joints sealed and grouted with cement slurry mixed with water proofing compound conforming to IS: 12645 in proportions recommended by the manufacturer. II) 2nd'c!ass layer of 25 mm thick cement mortar 1:3 (1 cement:3 coarse sand) mixed with water proofing compound in recommended proportions. Ill) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreadidng @ 8 cudm/sqm thoroughly embedded in the 2nd layer.

Using rough kota sotne.

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing sspecified stone slab 20 mm thick with cemm slurry mixed with water proofing compound conforming to IS: 2645 in recommended proportion with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar1:4 (1 cement:4 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-incharge.

Using rough kota stone.

Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).

600 mm dia piles

450mm dia. piles

Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :

300 mm dia piles

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.

Single pile upto 50 tonne capacity

Initial test

Routine test

Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.

Add for using extra cement in the items of design mix over and above the specified cement content there in.

Providing and supplying aluminium extruded tubular and other aluminium sections as per the rchitectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS74,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge.

Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete.

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- inCharge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.

50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.

40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign mater;al etc. and lining out complete.

New work (Two or more coats)

Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.

With rapid setting bitumen emulsion

On W.B.M / W.M.M. @ 0.4kg/sqm

On bituminous surface @ 0.25kg/sqm

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge.

Made of G.I. wire of dia 4 mm

Stone chips

Coarse/Fine Sand

Bricks

Local Sand

Cement

Coarse Sand

Local Sand

Stone Chips

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing toilet paper holder :

C.P. brass

Providing and fixing 32mm C.P brass bottle Trap of approved quality & make as per the direction of engineer-in-incharge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink without drain board

610x460 mm bowl depth 200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

40 mm dia

Providing and fixing soil, waste and vent pipes :

100 mm dia

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

75 mm dia

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Hubless centrifugally cast (spun) iron epoxy coated inside & outside I.S. 15905

Providing and fixing plain bend of required degree.

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Providing and fixing heel rest sanitary bend

100 mm dia

Sand cast iron S&S as per IS - 3989

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

sand cast Iron S&S as per IS: 3989

Providing and fixing single equal plain junction of required degree

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Providing and fixing single equal plain junction of required degree

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Providing and fixing terminal guard:

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Sand cast iron S&S as per IS - 3989

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipes

S S 304 grade coupling with EPDM rubber gasket

S S 304 grade coupling with EPDM rubber gasket

Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter :

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :

100 mm diameter pipe

75 mm diameter pipe

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :

100 mm diameter pipe

75 mm diameter pipe

Providing and fixing G.I. soil / waste pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler

Single tee with door

Shoe (Plain)

110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

20 mm dia. nominal bore

25 mm dia. nominal bore

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

15mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

65 mm diameter

80 mm diameter

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :

25 mm dia

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :

50 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

25 mm nominal outer dia pipe

40 mm nominal outer dia pipe

50 mm nominal outer dia pipe

65 mm nominal outer dia pipe

80 mm nominal outer dia pipe

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :

150 mm diameter

200 mm diameter

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not lessthan 4.50 kg and frame to be not less than 2.70 kg as per standard design :

180x150 mm size P type

With fly ash bricks (non modular) bricks of class designation 7.5

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

250 mm dia. R.C.C. pipe

300 mm dia. R.C.C. pipe

450 mm dia. R.C.C. pipe

Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) with RCC top slab with 1:2:4 mix ( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size ) , foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size ) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation cocreate 1:3:6 mix (1 cement :3 coarse sand : 6 graded stone aggregate 40 mm norminal size),and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm norminal size) finished with a floating coat of neat cement complete as per standard design .

inside size 90x80 cms and 45 cms deep including CI cover with frame ( light duty ) 455x610 mm internal dimensions total weight of cover & frame to be not less than 38 kg (weight of cover 23 kg & weight of frame 15 kg )

with common brunt clay FPS ( non modular ) bricks of class designation 7.5

Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand),in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation cocreate 1:3:6 mix (1 cement :3 coarse sand : 6 graded staone aggregate 40 mm norminal size),and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm norminal size) finished with a floating coat of neat cement all complete as per standard design:

Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand),in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation cocreate 1:3:6 mix (1 cement :3 coarse sand : 6 graded staone aggregate 40 mm norminal size),and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm norminal size) finished with a floating coat of neat cement all complete as per standard design:

With Common Burnt clay FPS ( non modular ) bricks of class designation 7.5

Extra depth for Circular Type manhole 0.91 m internal dia ( at bottom ) beyond 0.91 m to 1.67 m

With common burnt clay FPS ( non modular ) bricks of class designation 7.5

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering esides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per pecifications and having manufacture’s permanent identification mark to be visible even after fixing,including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different trata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

All Type of Soil

400mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.

200 mm nominal size dia having minimum wall thickness 5.40 mm

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.

200 mm nominal size dia

Supplying , filling , Spreading & Leveling stone boulders of size range 5 cm to 20 cm , in recharge pit , in the required thickness , for all lead and lifts , all complete as per direction of Engineer-in-charge.

Supplying , filling , Spreading & Leveling gravels of size range 5 mm to 10 mm , in recharge pit , over the existing layer of boulders , in required thickness , for all lead and lifts , all complete as per direction of Engineer-in-charge.

Supplying , filling , Spreading & Leveling coarse sand of size range 1.5 mm to 2 mm , in recharge pit , in required thickness , over gravel layers , for all lead and lifts , all complete as per direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:

200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

200 mm clamp

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

200 mm nominal size dia

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering esides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per pecifications and having manufacture’s permanent identification mark to be visible even after fixing,including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge.

Providing and filling Brick Blasted filling including proper watering and compaction in sunken areas all complete as per drawings and as directed by the Engineer-in-chargein-Charge.

Marble stone flooring with 18 mm thick in risers of steps, skirting and Cladding laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.

Granite stone slab 18 mm thick in risers of steps, skirting and Cladding laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required .

150 mm dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

Single headed Gunmetal

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :

Single headed Gunmetal

Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers , gaskets conforming to IS : 13095 of following sizes as required .

150 mm dia

Supplying and Fixing 63 mm dia 15 m Long RRL Hose pipe with 63 mm dia male and female coupling duly bound with GI wire , rivet etc . Conforming to IS : 636 ( Type A ) as Required .

Gun Metal

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Gun metal

Supplying and Fixing of Fire brigade connection of Cast iron body with gunmetal male intantaneous inlet coupling complete with cap and chain as required for suitable dia ms pipe connection conforming to IS : 904 as required

2 Way 100 mm dia MS Pipe

4 Way 150 mm dia MS Pipe

Supplying and Fixing Air Vessel made of 250 mm dia 8 mm thick ms sheet 1200 mm in height with air release valve on top and flanged connection to riser drain arrangement with 25 mm dia gunmetal wheel valve with required accessories pressure gauge and painting with synthetic enamel paint of approved shade as required

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of foilwing sizes as required:

150mm dia

Supplying, installation, testing and commissioning of electric driven Terrace Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : ( Terrace Fire Pump ).

900 lpm at 35 m Head

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required .

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia (wall thickness 6.3 mm)

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI] marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :

80 mm Dia

100 mm Dia

150 mm Dia

200 mm Dia

Supplying and Fixing orifice plate made out of 6 mm thick stainless steel ( Grade 304 ) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg / sqcm complete as required .

Providing Installation Testing and Commissioning of Non Return Valve of following sizes conforming to IS : 5312 complete with rubber gasket , GI Bolts , Nuts , washers etc as required .

100 mm dia

150 mm dia

Providing Installation Testing and Commissioning of stainless steel y-strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3mm dia holes with stainless steel flange.

150mm dia

200 mm dia

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.

40 Metre Length

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

Pendent Sprinkler

Horizontal side wall sprinkler

Providing and fixing of Flow switches in MS pipe line including connection extra as required.

150mm dia

Supplying, installation, testing & commissioning of sprinkler flexiblepipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :

2280 LPM at 70 m Head

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)

2280 LPM at 70 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump).

180 LPM at 70 m Head

Supplying, installation, testing and commissioning of electric driven Terrace Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : ( Terrace Fire Pump ).

900 lpm at 35 m Head

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 120 sq. mm and upto 400 sq. mm.

supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

P/ F RCC Hume Pipe

150 mm dia ID

FIRE FIGHTING PANEL

S/ F powder coated of approved shade MS Cable Trays

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

S/ F powder coated of approved shade MS Cable Tray Bends

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

S/ F powder coated of approved shade MS Cable Tray Tee's

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

S/ F powder coated of approved shade MS Cable Tray Cross Members

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 6 sq. mm (28mm)

4 X 10 sq. mm (28mm)

4 X 16 sq. mm (28mm)

3½ X 25 sq. mm (28mm)

3½ X 35 sq. mm (32mm)

3½ X 50 sq. mm (35mm)

3½ X 70 sq. mm (38mm)

3½ X 95 sq. mm (45mm)

3½ X 120 sq. mm (45mm)

3½ X 150 sq. mm (50mm)

3½ X 185 sq. mm (57mm)

3½ X 240 sq. mm (62mm)

3½ X 300 sq. mm (70mm)

10 Loop Panel

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED,metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W wall mount speaker ceiling/wall speakers complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

OUTDOOR UNIT

10 HP to 12 HP

4 HP to 22 HP

INDOOR UNIT

Supplying, Installation, Testing and Commissioning of following minimum capacity High wall type Indoor unit equipped with and comfort washable synthetic media prefilter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor)

Supplying, Installation, Testing and Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted mid high static ductable type Indoor unit equipped with washable synthetic media prefilter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration Isolators, drain pan, drain pump, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor) High Static Ductable units (minimum 49 to 77 pascal external static pressure)

Supplying, Installation, Testing and Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted high ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration Isolators, drain pan, drain pump, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor)

High Static Ductable units (minimum 78 pascal external static pressure)

Supplying, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units in confirmation to IS 18794 : 2024 made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for varialbe frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. (Total static pressure considered is max. 50 mm wg).

Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature).

1.0 TR with 5 Star BEE Rating

Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm

19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm

25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm

31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm

34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm

Thickness 0.63 mm sheet (24 gauge) Galvanized Sheet Steel Ducting

Thickness 0.80 mm sheet (22 gauge) Galvanized Sheet Steel Ducting

Thickness 1.00 mm sheet (20 gauge) Galvanized Sheet Steel Ducting

Thickness 1.25 mm sheet (18 gauge) Galvanized Sheet Steel Ducting

Thickness 0.63 mm sheet (24 gauge) Galvanized Sheet Steel Ducting

Thickness 0.80 mm sheet (22 gauge) Galvanized Sheet Steel Ducting

Thickness 1.00 mm sheet (20 gauge) Galvanized Sheet Steel Ducting

Thickness 1.25 mm sheet (18 gauge) Galvanized Sheet Steel Ducting

GI volume control duct damper

Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sqmm) for integration within AHU room

Actuator

Powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers

Powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers

Supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Thermal insulated flexible duct- 200 mm dia

Fire dampers in supply air duct/main branch and return air path with inbuilt mechanism of spring return action Fire damper

Actuator

19mmthickness

25mmthickness

Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable size Gl box etc.as required. (Switch Control Primary Points)

Group C

Wiring for light/ power plug with 2 X 4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recesed PVC conduit along with 1 No. 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 x 10 sq. mm + 1 x 10 sq.mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mmX75mm)

6 Module (200mm X 75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

3 pin , 5/6 amps socket outlet

5/6 amps switch

Telephone socket outlet

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required.

Supplying and fixing replaceable compact commercial batten suitable for Single TB LED tube complete with 20 watt LED polycarbonate TB tube with built in driver etc. directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required.

Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 Im/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 Im/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required

Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required.

lnstallation, testing and commissioning of ceiling fan,including wiring the down rods of standard lengjth ( upto 30 cm ) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

300 mm Sweep

Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB Isolator)

8 way, Double door

Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/lsolator)

6 way (4 + 18), Double door

8 way (4 + 24), Double door

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

6/32 amps, Single pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 amps, single pole

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 amps, Triple pole

Supplying and fixing following rating, double pole, (singte phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.l. tube, having single prong at top, with 85 mm dia 6 mm thick G.l' base plate including holes etc. complete as required.

Jointing copper/ G.l. tape (with another copper/ GI tape, base of the finial or any other metallic object ) by riverting/nut bolting sweating and soldering etc. as required.

Providing and fixing G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run)

Providing and fixing G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.l. strip, 125 mm long, with 4 nos. of tlnned G.l. bolts, nuts, chuk nuts and spring washers etc. complete as required.

Providing and laying G.l. tape 32 mm X 6 mm from earth electrode directly in ground as required.

Laying of one number PVC insulated and pVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Up to 35 sq mm.

Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering.

Above 95 sq.mm and upto 185 sq.mm

Above 185 sq.mm and upto 400 sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Up to 35 sq mm. (Clambed with 1mm thick saddle)

Above 35 sq mm and up to 95 sq mm. (Clambed with 25 x 3 mm thick MS Flat Clamp)

Above 95 sq. mm and upto 185 sq. mm (Clamped with 25/40x3mm MS flat clamp)

4 core, 6 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty ) armoured electric cable with aluminium conduct

4 core, 10 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conduct

4 core, 16 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 25 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 35 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 50 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 70 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 95 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 120 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 150 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 185 sq. mm XLpe/pVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 240 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 300 sq. mm XLPE/PVC insulated PVC sheathed(Heavy duty) armoured electric cable with aluminium conductor

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including accesssories, and providing masonary enclosure with cover plate (CI heavy duty) having locking arrangement and watering pipe of 2.7 mtr long etc. with charcoal or coke and salt ) as required.

Supplying and laying 25 mm X 5 mm G.l. strip in 40 mm dia G.l. pipe from earth electrode, including connection with G.l. nut, bolt, spring, washer excavation and refilling etc. as required.

Supplying and laying 25 mm X 5 mm copper strip in 40 mm dia G.l. pipe from earth electrode, including connection with brass nut, bolt. spring, washer excavation and refilling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing etc. as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Above 4.5 metre and upto 6.5 metre

Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

Supply and erection of 6 metre height Hot-dip galvanized octagonal street Iight pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm ,small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation)

Single arm, 1000 mm

Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. (1 run of cable).

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Amount of EMD (In Rs-):-92,65,500/-

Time of Completion:-17 Months

Description of Item

ACOUSTICAL DOOR (HIGH PERFORMANCE – DOUBLE SKIN COMPOSITE TYPE) : Providing and fixing in position factory-fabricated acoustical door assembly comprising of solid wood frame of finished size 150 x 80 mm (±2 mm tolerance), kiln-seasoned and chemically treated, fixed with approved anchor fasteners. Door shutter shall be minimum 75 mm thick, constructed with internal hardwood grid framework (Solid wood) at maximum 600 x 600 mm c/c, infilled with 50 mm thick polyester fibre insulation of minimum 1000 GSM and density not less than 24 kg/m³, combined with high-density sound barrier membrane of minimum 3 mm thickness (min. 4 kg/m² mass loaded vinyl or equivalent) provided continuously on both faces. Both faces of shutter shall be finished with 12 mm calibrated BWR grade plywood and 1.0 mm thick high-pressure laminate, factory pressed under controlled conditions to ensure uniform bonding. All edges shall be lipped with hardwood of minimum 8 mm thickness, machine finished. Shutter shall be provided with perimeter acoustic sealing system including EPDM/neoprene gaskets, and drop-down acoustic seal at bottom to ensure airtight performance. Doors without complete sealing system shall be rejected. The complete door assembly shall achieve minimum STC 35–40. Hardware shall include minimum 4 nos. SS heavy-duty hinges (150 mm), mortise lock, SS handle, door closer, and all necessary accessories, suitable for acoustic application.

Frame shall be finished with polish/paint as per approved scheme, and shutter with approved laminate finish including decorative mouldings / trims as per architectural drawings. Rate shall include all required cut-outs, hardware fixing, sealing system, edge finishing, accessories, wastage, and complete installation as per direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Shining Sun / Viraaj Extrutech / Absolute Solutions / Audible.

STAGE WOODEN FLOORING : Providing and fixing in position teak wood stage flooring system comprising of machine-cut tongue & groove teak wood planks of size 20 mm (±0.5 mm) thickness, 70 mm (±1 mm) width and random lengths between 750 - 1200 mm, kiln-seasoned to moisture content 8–12%, with uniform grain and shade. Planks shall be fixed over 18 mm thick BWR grade plywood using approved adhesive and concealed nailing system, ensuring tight joints with maximum gap not exceeding 0.5 mm. The plywood shall be supported on hardwood sub-frame of section 45 x 35 mm, spaced at maximum 600 mm c/c (±5 mm tolerance), rigidly fixed using metal clamps and dash/anchor fasteners. All timber members shall be seasoned and treated with anti-termite and anti-fungal chemicals. Below the framework, 8 mm thick elastomeric shock absorption pads (minimum density 600 kg/m³) shall be placed at required intervals to provide resilient performance and load distribution. A continuous polyethylene vapor barrier (minimum 150 microns) shall be provided between sub-frame and base surface to prevent moisture ingress. The complete system shall be installed ensuring level variation not exceeding ±2 mm over 3 m span, with proper expansion gaps at periphery. Top surface shall be machine sanded (multi-stage sanding) and finished with minimum 3 coats of high-performance melamine coating, including sealer and top coat, achieving uniform matt/satin finish with anti-skid properties.

Uneven sanding, patchiness, or visible joints shall not be accepted. shall deliver impact vibration absorption suitable for auditorium use. Rate shall include complete sub-frame, shock pads, vapor barrier, fixing of teak planks, sanding, polishing, edge finishing, cut-outs, skirting interface, wastage, and installation, excluding cost of plywood , all as per drawings and direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Shining Sun / Viraaj Extrutech / Absolute Solutions / Audible.

ACOUSTIC CARPET FLOORING WITH UNDERLAY : Providing and fixing in position heavy-duty woven pile carpet of total thickness not less than 10 mm, having pile height minimum 6 mm, minimum pile weight 1000 GSM. Carpet shall be laid over closed-cell cross-linked polyethylene acoustic foam underlay of minimum 6 mm thickness and density not less than 30 kg/m³, having impact sound reduction properties, properly fixed to subfloor using approved adhesive. . Installation shall be carried out using full spread adhesive method, ensuring tight joints with seam strength not less than manufacturer’s standard, No visible joints. The complete system shall achieve impact sound reduction, Rate shall include surface preparation, adhesive, underlay, cutting, edge finishing, skirting interface, wastage, and complete installation as per drawings and direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Milliken / Shaw Contract / Nexgen.

Audi. Hall wall Panelling

Providing and fixing acoustic wall panelling consisting of 2x50 mm (making box) in vertical studs of GI framework of India Gypsum ltd placed at 610 mm c/c vertically and horizontally fixed on wall with cleats (GI supported systems) and supplying and fixing 50mm thick glass wool with black glass fibre tissue facing (32 kg/cum) of U.P. Twiga and held in place at rear and front with 22 swg x 12. X12.5 mm gi chicken wire mesh with 25 mm air gap in the rear. In front, Providing and fixing Black cotton/jute @ Rs 50 /Rmt 40mmx 15mm European steam beech wood slats over a backing of 12mm thick duro marine ply strips 100mm wide at 610mm centre to centre fixed with screw/ rawel plugs etc if necessary as per architect’s direction. European steam beech slats to be melamine matt polished. The gap between the slats to be 8 mm. This paneling is proposed to be upto ceiling level from ground and at all sides of the front stage from bottom to the ceiling. (Fixed to the satisfaction of architect )

WOODEN SKIRTING : Providing and fixing in position machine-finished teak wood skirting of 15 mm thickness and 100 mm height, made from kiln-seasoned teak wood with moisture content between 8–12%, free from warping, cracks, or visible defects. Skirting shall be factory polished with minimum 3 coats of melamine finish (matt/satin), including sealer and top coat, achieving uniform shade and smooth surface. All edges shall be machine-cut with slight chamfer/rounded profile, and skirting shall be fixed using concealed screws with wooden plugs and approved adhesive, ensuring tight joints with maximum gap not exceeding 0.5 mm. Joints shall be properly aligned and finished without visible mismatch. Skirting shall be installed true to line and level, with proper alignment to wall finish and flooring junction. Necessary grooves/rebates (if required) shall be provided for flush integration with wall paneling or flooring system. Back surface shall be treated with anti-termite and moisture-resistant coating prior to installation. Rate shall include all necessary cutting, edge finishing, fixing hardware, adhesive, polishing touch-ups, wastage, and complete installation as per drawings and direction of Engineer-in-Charge.

AUDITORIUM SEATING -Godrej Jupiter Mid Back chair(with cupholder) MB (PUSH BACK TYPE - HIGH PERFORMANCE):The seat shall be made of Polyurethane Foam moulded with 1.5 ±0.1cm. thk. plywood insert measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric. Approx. Seat Size shall be: Depth: 42.0cm, Width @ rear: 44.0cm. Width @ front: 41.0cm. The back assembly shall be flexing type and made of Polyurethane Foam moulded with MS. tubular frame insert and shall be upholstered with fabric and back cover. The insert shall be made of 01.9 ±0.02cm x 0.16 ±0.0.128cm. thk.MS tubular frame with flexible nylon straps running across the length and width of the frame. Approx; Back-Size shall be: Height: 65.5cm, Width @ top: 34.5cm. Width @ seat level: 46.0cm. The HR polyurethane foam shall be moulded with density = 45 +/-2 kg/m3. The back cover and mechanism cover shall be vacuum formed from black ABS sheets. The Armrest understructure shall be upholstered PU foam moulded with MS insert. Arm tops shall be made of black Integral Skin polyurethane with 50-70 Shore 'A' Hardness & reinforced with wooden insert. Armrest width= 7.0 ±0.5cm and shall be offered as common/individual armrest between chairs.

• MS black powder coated (DFT 40-60 microns ) understructure with integrated, auto tip-up mechanism which folds the seat when not in use. • Footprint area of base plate shall be made of HR steel 15.0 ±0.2cm X 22.0 ±0.2cm X 0.5 ± 0.05 cm thick. • Backrest supporting beam width shall be-46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2 ±00.16cm MS tube. • Understructure fixed to ground by 200 mm to 250 mm Hilti hheavy duty dash fastners. The auditorium chair shall be designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368. Overall Dimensions of Chair shall be Seat Height - 46.5 cm, Height - 89.0 cm, Width & Depth of Chair Width(w1)-53.0cm(individual), width(W2) - 60.0 cm.(common arm) and Depth-69.0 cm.(normal) , Depth(D2)- 54.0(seat folded).UPHOLSTERY: Stitched fabric upholstery should be as per following specs. Std fabric (Glory shades) Wt.: 320 gm/running meter Fabric width: 1.2 M Specs: 100% Polyester

Providing & fixing ‘Unistone’ Wall Cladding Clay Tiles in size 230mm X 75mm X 17 mm thick in approved natural clay shade or ‘Terracotta’ non-pigmented made from natural clay. The appearance and shade of tiles should be natural terracotta having subtle variation in shade. The tiles would be made from special clay and firing temperature would be more than 1100 Celsius. The allowed variance in these tiles should not be more than ± 2.5 mm & top surface should be coated with Silicone and surface water absorption should not exceed 1% and by immersion method it should be less than 10%.

Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/Tubular Structure ( MS built-up section :-Rolled section & plates confirming to IS 2062 Grade Yst 350,Tubular Structure:- made from Steel hollow sections, ISI marked from SAIL / RINL / TATA/JINDAL, conforming to IS 1161/4923/1239, Minimum Yst 240 thickness upto 10mm ) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc. With special plate connectors, pinion joints, plates, hollow sections including Preparation of detailed fabrication and erection drawings of Structural steel work from design drawings issued by Engineer-In-Charge and incorporation of Engineer-In-Charge's comments on same, ransportation from fabrication yard, cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to make structure of Tensile Membrane shade. The tubular structure system with plate connectors, pinion joints, etc. is to be provided. The structure has to be provided as per conceptual drawings of Tensile fabric profile , including all arch beam, curved lateral beams and bracings, vertical support columns, nodal joints, ,bases of columns and high tensile bolts of grade not less than 10.9 having black phosphate coating. The complete structure to be Hot Dip Galvinized along with one coat of epoxy primer and two coats of Polyurethane paint on steel work at all locations prepared by sand blasting in required minimum 210 micron DFT (dry film thickness) for each coat as specified in particular specification. The work is to be executed as per technical specification and direction of Engineer-In-Charge.

Design, Supply Fabrication and installation of tensile membrane fabric type II -900 gsm ( Serge Ferrari) , Tenseo Edition TXS 900 F (B4616) both side PVDF coat,the base yarn should be better protected with thicker coating process for greater performance against UV exposure,Total Thickness-0.78mm,Acoustic Performance-Weaking Index-14dBA-ISO717-1,Light Transmission-5% UV Transmission 0%,yarns should be pre-stress with tensile strength 420/ 400 daN/ 5cm, tear strength 55/ 50 daN as per manufacturer's specification and 10 yearsmanufacturer warranty.Flame Retardancy B-s2-d0/EN13501-1, make Serge Ferrari or Verseidag equivalant. Including cutting, welding and cables, plates and necessary hardware for fixing the fabric as per approved shape.serge ferrari fabric manufacturer authorisation letter required. Membrane shall be cut and manufactured with high frequency PVC welding machine, cost of all materials complete as per directions.Quality in conformity with ISO9001,Enviornmental communication in conformity with ISO14021.

Providing and fixing white vitreous china wash basin under counter / Table Top basin, with C.I. concealed type brackets fixed to walls with GI rag bolts or approved fasteners etc., including 32 mm CP brass waste coupling, including painting of fittings and brackets, cutting and making good the walls wherever required all complete (Granite counter top will be measured and paid separately under relevent item): as per approved make and decision of engineer-in-charge

Providing and fixing CP brass auto closing system basin pillar tap / hand wash as approved by Engineer- In Charge

Providing and fixing CP brass single lever mixer system basin pillar tap / hand wash as approved by Engineer- In Charge

Providing & fixing in position GI 100x50 elbow floor drain including cost of cutting and making good the walls and floors wherever required.

Providing and fixing 125 mm dia S/S grating (with or without hole)for floor or Nahani trap.

Providing & Fixing water cooler wth stainless steel having storage capacity of 80 liter & cooling capacity 60 liter / hour with Reverse osmosis system & ultra voilet membrane TDS reduction 90% having automatic back wash system with filteration unit & all other required accessories complete in all respect as per direction of the engineer in charge .

Providing and fixing hand held ablution fitting (health faucet) with 1.2 meter long flexible tube and wall hook, all complete approved engineer-in-charge

Supply and fixing of 15mm CP brass 2 -Way Bib Cock with wall flange and suitable length CP brass extension pipe all of approved engineer-in-charge

Supply ,Erection , Testing & Commissioning of Automatic water level control panel & related accessories for pumping automation with consisting of automatic water level controller , level sensor with stainless steel probe, motorized butterfly valve, motorized valve controller with complete in all respect.

upto 50 mm dia. nominal bore

Providing and fixing HDPE Pop Up Sprinkler Irrigation System Pop height 100 mm with fittings all complete as per direction of engineer in charge.

Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete.

150 mm diameter

200 mm diameter

SUB HEAD -1.0 PIPING, HYDRANT , SPRINKLER AND ACCESSORIES SYSTEM FOR BUILDINGS

Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x 0.90 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in PO red colour suitable to accommodate, internal hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be fixed inside the FHC Cabinet Complete as required .

Supplying, installation, testing and commissioning of weather proof M.S hose cabinet of size 750 x 600 x 250mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following: - (for yard hydrant)

Providing and fixing standard firemans axe with heavy rubber handle.

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm.

Providing and fixing Fire Extinguishers (CO2 type powder ) 4.5 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers (A, B, C type powder ) 6 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing 25 mm dia Inspector Test Valve 25 mm with drain arrangement complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers Clean Agent capacity 2 Kg. complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers 50ltr. (Water & Foam type) complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers consisting of welded M.S. cylindrical body automatic modular CO2 type extinguisher.(Capacity 22.5 Kg.) complete with all accessories as per manufacturers specifications.

Supplying, installation, testing & commissioning of 13 Passenger , Gearless type,Machne room-less passenger lift having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed specifications as under and additional details given in schedule of technical particulars. Provisions of General CPWD specifications for lift works are to be followed.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points)

Primary point controlled by one MCB.

Same as item above but Secondary point. i.e. Points to be looped with Primary point with 2.5 sqmm wire and Point wiring

Supply, Installation, Testing and Commissioning of 5W Mirror Light.

Supply, Installation, Testing and Commissioning of 100W Led Spot Light.

Supply, installation, testing & commissioning of One Set of 1 Nos , 8 KVA UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 90 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other.

Supply, installation, testing & commissioning of One Set of 1 Nos , 4 KVA UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 90 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other.

Supply of Lightnig counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, meet the requirements for IS/IEC 62305 and IEC 62561-2.Tested for Electrical ,Mechanical and Chemical as per IEC 62561.

Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections.

50 mm x 6 mm thick Cu flat

50 mm x 6 m thick GI flat

11 KV HT DP STRUCTURE

RSJ pole of 9.15 mt length of size 175 x 90 mm complete with suitable M.S. base plate welded at bottombase plate - 2 Nos.

MS Channel of size 100 x 50 mm, length 4 mts (approx)

11 KV AB switch - 1 set

11 KV Horn Gap fuse Unit - 1 set

11 KV Lightning Arrestor

11 KV Disc insulator

11 KV Pin insulator

6 SWG copper wire for jumpering

Supply and erection of Stay set complete with necessary foundation, excavation and refilling of earth etc. as required.

Concrete foundation for RSJ poles burrioed upto a depth of 1830 mm in ground in a pit of size 450X450 mm in CC 1:3:6 along with 200 mm copping above ground inclusive of earth work.

Necessary Nut, Bolts, clamps, operating handle for AB switch, clamping welding etc. complete as required.

Painting the RSJ poles complete with two coat of Red Oxide and two coats of GI enamel paints complete as required.

11 KV H.T. METERING PANEL (INDOOR TYPE):

Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger ( SMPS Based ) with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 12 Nos. 20/16A DP MCB's (D.C. duty) as outgoing complete as required and as directed by Engineer Incharge.

DISTRIBUTION TRANSFORMERS

Supplying of following size of aluminum conductor, XLPE insulated armoured and over all PVC sheathed, 11 KV (E) grade earthed cable as per relevant IS code and technical specifications

Supply of fire buckets 4 No. in each set duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. Fire buckets shall be painted red from outside and white from inside with additional handle at the bottom and suitable for outdoor installation.

Supply and fixing on position the approved Single Line Diagram framed in 1000 x 800 mm size glass frame and installed in main switch room as directed by Engineer Incharge

Supply of First Aid box as directed by Engineer Incharge

Supply of tool kit with 1 pair 11 KV rubber hand gloves as directed by Engineer Incharge.

Supplying & fixing standard shock treatment charts in English & Hindi duly framed and covered with glass as directed by Engineer Incharge.

Providing Safety mat made of elastomeric polymers Material (Class B) 1.2 M wide with thickness 2.5 mm to withstand 12KV dielectric strength AS PER relevant IS Code

Providing a mat made of elastomeric polymers Material (Class A )1.2 M wide with 2 mm thickness to withstand 1.1 KV dielectric strength AS PER relevant IS Code

500 KVA (With Outdoor Acoustic Enclosure)

250 mm dia

SS Flexible Bellow 250 mm dia

Aluminium cladding for the Residential type silencers

MAIN LT PANEL

STAF QUARTER (TEACHING) PANEL

STAF QUARTER (NON TEACHING) PANEL

PRINCPAL QUARTER VTPN DB

AUDITORIUM & ACADEMIC BLOCK VTPN DB

2C x 6 Sq.mm.

2C x 4 Sq.mm.

3C x 6 Sq.mm.

3C x 4 Sq.mm.

4CX 2.5 Sq.mm

4C x 4 Sq.mm.

4C x 6 Sq.mm.

1C X 50 sqmm Cu flexible(Unarmoured) cable

7 C x 1.5 Sq.mm.

12 C x 2.5 Sq.mm.

4C/3C x 6/4 sq.mm.

4C/3C/2C x 4/6/2.5 sq.mm.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 6 sq. mm (28mm)

Raceways and Floor outlet box

150 mm x 40 mm x 2 mm thick

100 mm x 40 mm x 2 mm thick

50 mm x 40 mm x 2 mm thick

Supplying, installation, testing and commissioning of Gate light fitting suitable for 42 watt IP 65LED having system lumen output of minimum 4200 lumens complete with all accessories and lamp.

Supplying, installation, testing and commissioning of 70W LED Solar Street Light On 6 Meter GI octagonal Pole having Compact, Aesthetic, Eco friendly & modern integrated Solar street light in extruted Aluminum construction with high efficiency monocrystalline silicon photo voltaic panel, high efficacy SMD LED 6500K having secondary lens optics for street lighting distribution, high performance lithium battery, MPPT charge controller & Intelligent control module/sensor with higher reliability, long service life, suitable for easy & quick installation.

Providing, installation of 200 x 150 x 125 mm polycarbonate weather proof (IP-55) junction box and SP MCB’s and terminal block.

Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete.

Supply, Installation, Testing & Commissioning of 16TB Surviellance Hard Disk. Approved Makes: WD /segate /Toshiba/HP

Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display Panel. Approved Makes: Panasonic / LG/ Sony/ Samsung

SITC of Category 6 RJ45 Unshielded Modular Jack, ISO/IEC 11801:2nd edition, EN 50173-1, ANSI/TIA/EIA 568-C.2 Category 6, IEC 60603-7 (603-7), Interoperable and backwards compatible with Cat.5e, Universal 110 Impact Tool & Tooless (Both) Termination, Min. 250Mhz Bandwidth, 1G BASE T, IDC >= 200 Re-Terminations, >= 750 Plug Mating Cycles, 1.5A Current, 30lbs Plug Retention, UL Certified UL 1863, Strain Relief boot for Pairs, Bend Limiting Boot for Cable, Without Any OEM Proprietary Tool Termination Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24-Port 1U / 48-port 2U Unloaded Universal Modular Straight Patch Panel preloaded with cable support Bar (with slots to tie individual cable properly at the Support Bar), Stainless Steel Rear Metal Frame, Individual Port Transparent Shutter and Labelling, Preloaded earthing plug for surge protection, UL 1863 Complied, CRC Metal with Black Powder Coated, RoHS Compliant, Individually Replaceable Port IO, (Shuttered IO not recommended, because when shutter gets malfunctioned then entire IO is of no use) Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6 Patch Cord U/UTP Unshielded 24AWG Bare Copper, Stranded Flexible Conductor, HDPE Insulation, LSZH Jacket, ANSI/TIA 568C.2 Category 6 Patch Cord, Support 1GBASE-T with Min. 250Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.0mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, PC UL94-V-0, Factory assembled with Transparent Premoulded Boots, Length 1 Meter. ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6 Patch Cord U/UTP Unshielded 24AWG Bare Copper, Stranded Flexible Conductor, HDPE Insulation, LSZH Jacket, ANSI/TIA 568C.2 Category 6 Patch Cord, Support 1GBASE-T with Min. 250Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.0mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, PC UL94-V-0, Factory assembled with Transparent Premoulded Boots, Length 3 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of UK Style (Square) Keystone-Type Shuttered Faceplates, 1, 2 & 4 port configurations, White Color, Elegant 2 Piece (2 Plate) design for better aesthetics , Cover and Base Plastic Material ABS-UL94-V2, 86 x 86mm Approved Makes: Derwiser/Nexans/Siemon/Systimax

Supply, installation, testing and commissioning of 5 MP (2502 x 1944) Dome camera ,ONVIF profile S , G & T, M. CE , FCC Certified ,1/2.7” Progressive Scan CMOS. Color 0.004lux, Shutter speed1/5~1/200000s,I/O,1INand1OUT,DC12V/PoEIEEE802.3af).265/H.265+/H.264/H.264+/MJPEG, 256Kbps ~ 8Mbps, 256GB SD Card, Triple Stream, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, NFS/SMB/CIFS, SSL/TLS, P2P. Analytics: Face Recognition, Pedestrian & Vehicle, Intrusion, Line Crossing, Object Detection, Crossing Counting, Heat Map, Crowd Density, Queue Length, License Plate, Rare Sound, Intrusion, Region Entrance, Region Exiting. 7 users, IP67 & IK10, -30～+60°C, AES 256. Approved Makes :Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, installation, testing and commissioning of 5 MP (2502 x 1944) Bullet camera ,ONVIF profile S , G & T, M.CE , FCC Certified ,1/2.7” Progressive Scan CMOS. Color 0.004lux, Shutter speed1/5~1/200000s,I/O,1INand1OUT,DC12V/PoE(IEEE802.3af),H.265/H.265+/H.264/H.264+/MJPEG, 256Kbps ~ 8Mbps, 256GB SD Card, Triple Stream, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, NFS/SMB/CIFS, SSL/TLS, P2P. Analytics: Face Recognition, Pedestrian & Vehicle, Intrusion, Line Crossing, Object Detection, Crossing Counting, Heat Map, Crowd Density, Queue Length, License Plate, Rare Sound, Intrusion, Region Entrance, Region Exiting. 7 users, IP67 & IK10, -30～+60°C, AES 256. Approved Makes :Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, installation, testing and commissioning of 256 channel, Live and recording resolution up to 12MP, Recording bandwidth Incoming 1024 Mbps and outgoing 800 Mbps, RAM 32 Gb*2, Support RAID 0/1/5/6/10, Support Face detection and Recognition with Face Capture/Register quantity 1000000/ 10000, 512 User list, display out 3 HDMI and 1 VGA port, HDD: 16 SATA HDD Slots, Each SATA support up to 18TB, Operating temperature -10°C~+50°C. Approved Make:- Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 24*10/100/1000M RJ45 ports and 4*1/10G SFP+ fiber slot ports, Port 1-24 can support IEEE 802.3af/at PoE standard, switching capaticy of 598 Gbps, forwarding performance 95.23 Mpps, maximum PoE output power is 400W(at-600W), with 32K MAC address. Should have Static Routing , system logging, Telnet, SSH2.0, SNMP V1/V2C/V3, Network Time Protocol (NTP), FTP, TFTP, Xmodem. Approved Make :Cisco/ Impulse / Juniper / Nexxus

Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 10*10/100/1000M RJ45 ports and 4*100/1000M uplink SFP slot ports, Port 1-8 can support IEEE802.3af/at PoE. Support DC dual power supply input and DIN rail mounting. Switching capaticy of 256 Gbps, forwarding performance 20.83 Mpps, having 8 x 10/100/1000BASE-T PoE-plus(RJ45) with maximum PoE output power is 120W(at-240W). , with 2*10/100/1000Base-T uplink RJ45 ports 4*100/1000Base-X uplink SFP slot ports., 8K MAC address. Should have Static Routing , system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), and IPv6 features from day 1. Approved Make :Cisco/ Impulse / Juniper / Nexxus

Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest. Approved Makes: HP / DELL / IBM / LENOVO

Supplying, installing, testing and commissioning approved make Addressable Multi-criteria Photo-Thermal Above False Ceiling Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. The detector sensitivity (day & night) shall be controlled from the panel to get accustomed to the local environment.The detector shall comply UL268, 7th Edition guidelines. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supplying, installing, testing and commissioning approved make Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Detector shall comply UL521 guideline. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supplying, installing, testing and commissioning approved make Addressable Loop Powered Autoaligned Beam Detector. The beam detector shall be used for High Ceiling application with a detection range from 5 upto 100 mtrs and highly resistant to building movement; tolerates +/- 1° movement, Resistant to solid object intrusion, , Built-in imager heater, Resistant to strong light sources; does not alarm when saturated by sunlight, Automatic sensitivity threshold level settings and drift compensation. The detector shall be IP-55 compliant. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supply, Installation, Testing & Commssioning of 1X500W Class-D Amplifier, which can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection and High Efficiency Class D Power Amplifier, 500W, 100V/70 Output, with 100 - 240 VAC input and 24 VDC backup power Supply

Supply and drawing of 2 C X 1.5 Sq mm multi stranded twisted shielded FRLS Copper cable.

SITC of Armoured 06 Core Singlemode (OS2) 9/125 Fiber Cable, ITU/T G.652.D, IEC 60794-1 Complied, Outdoor ECCS Armored Fiber Cable with PBT Loose Tube Filled With Thixotropic Jelly, Uni-Tube, 2 Steel Wire Embedded In HDPE Jacket, Water Swellable Tape Under Armor, UV-HDPE Jacket with 1.5mm Thickness, 7.5 +/- 0.5 mm Overall Diameter, Crush Resistant 2000N/100mm, Tensile Resistant 1000N, Bend Radius : 20 x Cable Diameter, Operating Temperature : -20 to + 60 Deg C, Max. Attenuation @1310nm & 1550nm : <= 0.35dB/km & <= 0.22dB/km Respectively, Cladding Non-Circularity ≤1%, Mode Field Concentricity Error ≤0.6 um, Coating/Cladding Concentricity Error ≤ 12 um, Nominal Weight 65Kg/km, Black Color Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 6 Port 1U x 19” LIU Loaded with Singlemode OS2 LC Adapters & LSZH Pigtails along with Splice Trays, Min. 4 No of Circular Cable Entry with Rubber Groummet/Glands to close any open entry, Cable Holders for Cable Entry Inside Panel, Heat Shrink Tubes for Splices, Tube for open fibers, Ties, Panel shall be Powder Coated with Min. 1.2mm Metal Sheath, 30 Years Channel Warranty. Factory Loaded LC Type LSZH Pigtails should meet IEC 61034-1 ,IEC-60332-1, IEC-60754-1, Insertion loss <= 0.35 dB, Return Loss >= 50, Attenuation: 1310/1550 : 0.3/0.2 dB/KM, Repeatability: <= 0.2DB 1000 Times Mating Cycles, RoHS Complied, Meets ANSI/TIA 568.3-D Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24 Port 1U x 19” LIU Loaded with Singlemode OS2 LC Adapters & LSZH Pigtails along with Splice Trays, Min. 4 No of Circular Cable Entry with Rubber Groummet/Glands to close any open entry, Cable Holders for Cable Entry Inside Panel, Heat Shrink Tubes for Splices, Tube for open fibers, Ties, Panel shall be Powder Coated with Min. 1.2mm Metal Sheath, 30 Years Channel Warranty. Factory Loaded LC Type LSZH Pigtails should meet IEC 61034-1 ,IEC-60332-1, IEC-60754-1, Insertion loss <= 0.35 dB, Return Loss >= 50, Attenuation: 1310/1550 : 0.3/0.2 dB/KM, Repeatability: <= 0.2DB 1000 Times Mating Cycles, RoHS Complied, Meets ANSI/TIA 568.3-D Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Fiber Patch Cord, LC Duplex - LC Duplex, 9/125μm OS2 Singlemode Duplex Zip Cord (<= 2.0mm), IL <= 0.35dB, RL>= 50dB, LSZH Jacket IEC 60332-1, Operating Temperature -40°C to +85°C, Meets ANSI/TIA 568.3-D, Length 3Meter Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat 6A, 23 AWG Bare Copper Solid Conductor U/UTP Unshielded LSZH Jacket (Min. 0.8mm Thickness), ANSI/TIA 568 C.2 Category 6A, Flame Rating IEC 60332-1, Halogen Acid IEC 60754 -1, Smoke Density IEC 60134-2, ISO/IEC 11801–2nd Edition, Min. 500 Mhz Bandwidth, Min. 10G BASE T, 7.2 mm Nominal Diameter, HDPE Insulation with Diameter 1.08 +/- 0.05mm, No Shield/Non Metallic Barrier Tape Inside Cable, Breaking Strength : >= 400N, Conductor Resistance <= 7.5 Ω /100m, Min. Elongation at Break of Insulation : 300%, Min. Jacket Tensile Strength >= 10 N/mm2 (Mpa), Dielectric Strength: DC 1500 V /Min., Euroclass Eca, RoHS Complied, Operating Temperature -20 to + 75 Deg C, IEEE 802.3bt Type 1, Type 2, Type 3, Type 4 PoE Complied, Propagation Velocity : 69% (nominal), Cable Roll of 305 Mtr, Cable shall not have any kind of Non Metallic Barrier Tape or Metallic Shield inside Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Category 6A RJ45 Unshielded Modular Jack, ISO/IEC 11801:2nd edition, EN 50173-1, ANSI/TIA/EIA 568-C.2 Category 6A, IEC 60603-7 (603-7), interoperable and backwards compatible with Cat.6, Universal 110 Impact Tool & Tooless (Both) Termination, Min. 500Mhz Bandwidth, 10G BASE T, IDC >= 200 Re-Terminations, >= 750 Plug Mating Cycles, 1.5A Current, 30lbs Plug Retention, UL Certified UL 1863, Strain Relief boot for Pairs, Bend Limiting Boot for Cable, Without Any OEM Proprietary Tool Termination Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24-Port 1U / 48-port 2U Unloaded Universal Modular Straight Patch Panel preloaded with cable support Bar (with slots to tie individual cable properly at the Support Bar), Stainless Steel Rear Metal Frame, Individual Port Transparent Shutter and Labelling, Preloaded earthing plug for surge protection, UL 1863 Complied, CRC Metal with Black Powder Coated, RoHS Compliant, Individually Replaceable Port IO, (Shuttered IO not recommended, because when shutter gets malfunctioned then entire IO is of no use) Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6A Patch Cord U/UTP Unshielded 24AWG Bare Copper Stranded Flexible Conductor, HDPE Insulation, Transparent Cross (+) Filler Between Pairs, LSZH Jacket, ANSI/TIA 568C.2 Category 6A, Support 10GBASE-T with Min. 500Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.2mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, Factory assembled with Transparent Premoulded Boots, Length 1 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6A Patch Cord U/UTP Unshielded 24AWG Bare Copper Stranded Flexible Conductor, HDPE Insulation, Transparent Cross (+) Filler Between Pairs, LSZH Jacket, ANSI/TIA 568C.2 Category 6A, Support 10GBASE-T with Min. 500Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.2mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, Factory assembled with Transparent Premoulded Boots, Length 3 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of UK Style (Square) Keystone-Type Shuttered Faceplates, 1, 2 & 4 port configurations, White Color, Elegant 2 Piece (2 Plate) design for better aesthetics , Cover and Base Plastic Material ABS-UL94-V2, 86 x 86mm Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 42U Floor Standing Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment to conforms to DIN 41494 or equivalent ISO standard.Front Door should be Lockable Toughened Glass Door, Steel Single, Steel Dual. Standard Finish should be Powder Coated with Black colour. Mounting Option : Castor wheels (Front 2 wheels with Break and rear without break) Or Levelers Or Base plinth. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Size Options : 600 x 600 mm / 600 x 800 mm / 600 x 1000 mm / 800 x 1000 mm / 800 x 1200 mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 22U Floor Standing Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment to conforms to DIN 41494 or equivalent ISO standard.Front Door should be Lockable Toughened Glass Door, Steel Single, Steel Dual. Standard Finish should be Powder Coated with Black colour. Mounting Option : Castor wheels (Front 2 wheels with Break and rear without break) Or Levelers Or Base plinth. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Size Options : 600 x 600 mm / 600 x 800 mm / 600 x 1000 mm / 800 x 1000 mm / 800 x 1200 mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 15U Wall Mount Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment.: Conforms to DIN 41494 or equivalent ISO standard. Standard Finish should be Powder Coated with Black/Gray colour. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 450/500/600mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 6U Wall Mount Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment.: Conforms to DIN 41494 or equivalent ISO standard. Standard Finish should be Powder Coated with Black/Gray colour. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 450/500/600mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 15U Weatherproof Outdoor Enclosure. Wall / Pole Mount Outdoor IP65 grade or BETTER Steel. Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.. Steel,Racks should be made out of steel and proceeded with CNC Punching, forming, welding and powder coated. Front Door with IP 65 Filter & hood , IP Compatible lock. CRCA Sheet Steel, Flush Mounted with Gasket seal. # Door opening 130º angle with concealed hinges. Top and bottom panel Welded to frame with cable entry exit cut outs in Bottom. Canopy made from CRCA steel sheet folded & welded with cut-outs for air exhaust. Removable canopy for maintenance purpose. Welded Construction with Special Dual Coat Powder coated. Lockable Metal Front Plain Door.Colour coat RAL 7035. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 400/600mm

Supply, Installation, Testing & Commissioning of Core switch minimum 48 x10G SFP+ Port, 4xQSFP28 Port.2XQSFP+ Ports Should have RPS and hot swappable PSU option from day 1. Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. switching capacity of1.92Tbps, forwarding performance 1400 Mpps, should have non-blocking architecture, 64K MAC address. Should have Static Routing, RIP, VRRP, OSPF ,BGP,PBR, PIM-SM,PIM-DM ,OSPFv3 ,VRF,ECMP.BFD - BGP,BGP4+,RIPng,URPF,ISATAP Tunnel from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of 24 port Distribution switch minimum 16 x10G SFP+ Port, 4xQSFP28 Port.8XSFP28 Ports.Should have RPS and hot swappable PSU option from day 1. Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. switching capacity of1.52Tbps, forwarding performance 1130 Mpps, should have non-blocking architecture, 64K MAC address. Should have Static Routing, RIP, VRRP, OSPF ,BGP,PBR, PIM-SM,PIM-DM ,OSPFv3 ,VRF,ECMP.BFD - BGP,BGP4+,RIPng,URPF,ISATAP Tunnel from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of Access switch 24x 1G PoE/PoE+ and 4 x 1/10GSFP+ ports. Should have hot swappable RPS from day 1, Should have AC and DC PSU mix and match arrangement for power source resiliency in the same hardware .Min 370 Watt PoE/PoE+ power budget . Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. Switching capacity of 168Gbps, forwarding performance 124 Mpps, should have non-blockingarchitecture,32KMACaddress.ShouldhaveStaticRouting,RIP,VRRP,OSPF,OSPFv3,RIP,BFDOSPF,BGP,PBR,ECMP,VRRP from day 1, Should support ISSU from day 1, Should support stacking with min 12 members in a stack(Stacking ports should be exclusive of above mentioned ports), Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1, MTBF Min 198000 Hrs. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of 8 Port POE+ Access Switches with switching capaticy of 96 Gbps, forwarding performance 71 Mpps, having 8 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 125W, with 4 x 10G SFP+ uplink ports. Should Non Blocking architecture , 16K MAC address. Should have Static Routing ,RIP,VRRP, OSPF from day 1,Should support ISSU from day 1 ,Should support stacking with min 12 members in a stack, Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr Approved Make : Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of fiber Modules 1000BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of fiber Modules 10G BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of fiber Modules 40G BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of ITAM Web Appliance Hardware: Rack based Intel Core i7 or better, 3.20GHz w/ HD Graphics, Memory 32GB 4x8GB DDR4 2666MHz, Minimum 1 TB SATA/SSD Drive, Integrated NIC, COTS Compliant.Web Appliance Software: Capture specifications, warranties, Serial Numbers, MAC Addresses, IP info, what other H/W relates/connects to this H/W, item status, event logs, assignees, Specifications, License information, Aprroved Makes:F5/ Palo-alto / Juniper / Nexxus/Arista

Supply, Installation, Testing & Commissioning of 4x4 Access Point Ceiling Mount having 1 x 2.5GE (PoE/PoE+) port , 1 x G Copper port .For 2.4G 2*2 MIMO, For 5G 4*4 MIMO .Built-in omnidirectional internal antennas, Dual frequency with min 6 Stream .For 2.4G: 3dBi and for 5G: 3dBi.200 square meter coverage (without any obstacle).Maximum number of users per band should be minimum 128. power consumption:18W. Encryption: AES, WPA3\802.11i: Supported, Authentication: MAC Address/PSK, Client isolation: Both Layer-2 wireless client isolation and SSID isolation, forwarding security: Packet filter, MAC address filter, and broadcast storm suppression, SSID-VLAN binding: Supported, Management frame protection (802.11w): Supported. Should be CE, FCC, CCC, ROHS certified. Access Points should have option to be managed by cloud infrastructure without replacing the hardware in future required. Approved Make : Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of Pure IP at core server Based voice solution with 04 Port Voicemail ,04 Port FXS ,04 Port FXO , 1 PRI Trunk lines (30 Channel x 1 = 30) Circuit with CLIP Facility ,33 IP users & 250 analog user License ,01 Nos. IP Operator Console, 100 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, TEC should be with GR Number, - Should Support Redundant server in active-Active mode.

Supply, Installation, Testing & Commissioning of Type 1 IP Phone 2 VoIP account, 120x40 Dot-matrix screen with backlight, Full HD duplex speaker phone, IPV6, Gigabit Ethernet, PoE .

Supply, Installation, Testing & Commissioning of Type 2 IP Phone with 4 Voip accounts, 4 line keys, 3.5-inch (480x320) Colour Screen display with backlight, GigE, colour displays for 6 DSS keys, IPV6, 2 x Gigabit Ethernet , PoE.

Supply ,Installation ,Testing & Commissioning of 4 Door 4 reader access control panel with with buttons for entering and reading cards and exiting the door, Large capacity of 24,000 users, 100,000 offline storage records. TCP/IP high-speed communication, convenient LAN and WAN wiring, The card reader can be connected to the international standard Wiegand 26bit-34bit Powerful functions. In addition to the access control function, the software also presents attendance, online patrol, conference sign-in, fixed consumption, WEB mother card function, and more cost-effective. Approved Makes : Lenel / Honeywell / Impulse

Supply, Installation , testing and commissioning of 12 V SMPS DC Power Supply Unit, highly regulated and spikes free terminal voltage and heavy sourcing current for regulated terminal voltage. Approved Makes : Lenel / Honeywell / Impulse

Supply & Installation of Operation system: Windows xp and the upward system, such as: Windows 2000 、Windows XP 、 Windows7、Windows Vista、windows nt、Windows 2000 sever、Windows 2003 、Windows Server 2008 and so on Database :MS Access (the default database after installation is the bringing small database of operating system) MS SQL Server (suggest more than 200 people, or swiping card every day more than 1000 records, had better choose to use this article database.) Approved Makes : Lenel / Honeywell / Impulse

Supply, Installing, Testing & Commissioning of fingerprint, IC/ID swipe card Fingerprint capacity: 1000 pieces Short Range Multi Technology Smart Card Reader UL Listed For Exit of Lift Access Doors, tripod/Flap barrier- Entry & Exit (doors) as per the specification, with back plate & Back Box. Approved Makes : Lenel / Honeywell / Impulse

Supply ,Installation ,Testing & Commissioning of Smart Card Contactless transmission of data and supply energy (No battery needed), Operating Distance: Upto 100mm (Depending on Antenna Geometry), Operating Frequency: 13.56 MHZ. Approved Makes : Lenel / Honeywell / Impulse

Supply ,Installation ,Testing & Commissioning of Electromagnetic Lock 600 lbs, Single leaf, LED Status Display, Approved Makes : Assa Abloy / Ablesco / Impulse / BEL

Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23 AWG LSZH as per ANSI/TIA 568 C.2 and ISO/ IEC 11801–2nd Edition, ROHS Compliant, solid copper conductors, tested @250 Mhz, with HDPE insulation of individual conductor and over all Dia of 5.8mm for Connectivity of Hub room to End Point. Approved Makes: Derwiser/Nexans/Siemon/Systimax

Supply and Laying of 8 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers & the access controllers) Approved makes : Polycab/ Havells/Bonton/KEI/Fionlex

Supply and Laying of 4 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers & the access controllers) Approved makes : Polycab/ Havells/Bonton/KEI/Fionlex

Supply ,Installation ,Testing & Commissioning of U/L Clamp made of aluminium anodised for EM Lock. Approved Makes : Assa Abloy / Ablesco / Impulse / BEL

Supply , Installation , Testing and commissioning of Exit push button as required. Approved Makes : Lenel / Honeywell / Impulse

Supply and Fixing of 25 mm dia MS Conduit. Approved Makes : AKG / BEC / MK

Supply, installation, testing and commissioning of automatic electromechanical boom barrier suitable road width 5-7 mtrs for intensive applications, high speed with 4-6 second opening/closing time with Aluminium housing & aluminium boom with fork rest, IP 67 Protection etc. (for Gate Entry/Exit) Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of a set of Entry/Exit push buttons for manual open and closing of barriers etc. complete as required.(for Gate Entry/Exit). Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of Photocell based safety device to avoid closing of the barrier when a Vehicle is crossing the barrier. ( Anti Fall Protection ). Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply installation, testing and commissioning of Remote & Receiver. Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of Loop detector for closing of the barrier when a Vehicle crosses the barrier. Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply, Installation, Testing & Commissioning of Long Range RFID reader with controller 10-12 mtr read range with suitable mounting arrangement for Outdoor Application and shall be compatible with boom barrier integration Approved Makes:- Speedgatz, Synergy, Kaba

Supply Installation Testing & Commissioning of 3mtr pole for mounting of RFID reader with all accessories complete as required. Approved Makes:- Speedgatz, Synergy, Kaba

Supply and programming of Wigand Proximity Cards/RFID Tagsa with credibility of having integrated 50 Readers integrated with Booms as a unified solution along with facility code as per specifications Approved Makes:- Speedgatz, Synergy, Kaba

Inline Fans

Air Quantity : 250 CFM

Air Quantity : 300 CFM

Air Quantity : 400 CFM

Air Quantity : 500 CFM

Air Quantity : 600 CFM

Plastic Propeller Fans

Air Quantity : 100 CFM

Air Quantity : 150 CFM

AXIAL FLOW FANS

Duty: Lift Well Pressurisation

Duty: Lift Lobby Pressurisation

Duty : Stair case pressurisation

Duty: Normal & Smoke Exhaust for Basement

Duty: Normal & Fresh Air in case of fire for Basement

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaust for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaust for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaus for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaus for Corridor

CONTROL & TRANSMISSION WIRING

Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for transmission

Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for remotes

DRAIN PIPING

25 mm dia

32 mm dia

REFNET (Y-JOINT )

Supply,installation,testing and commissioning of Y - Joints with necessary fittings as per specification.

VRV/VRF Central Controller for Indoor & Outdoor Units

Supplying, installing, testing and commissioning of Fresh Air powder coated Anodized extruded aluminium construction fresh air louvers (50 mm deep) (Fresh air louver with VCD , bird screen & rattle-free) complete as per specification.

Supplying, installing, testing and commissioning of Exhaust Air powder coated Anodized extruded aluminium construction fresh air louvers (50 mm deep) air louver without VCD , bird screen & rattle-free)complete as per specification.

Supply,installation and testing of double layer flexible duct connector consisting of a flame retardant fabric secured to extruded aluminium frame on both sides to provide a wear resistant airtight flexible connection. Fabric shall be mildew resistant, water proof and silicon impregnated.Flexible connector shall be supplied in accordance with the specifications and drawings.

MAIN HVAC PANEL

OUT DOOR PANEL

VENTILATION PANEL

SITC of high-performance passive constant curvature line array loudspeaker system of approved makes comprising a two-way passive design suitable for professional auditorium and installation applications. The enclosure shall consist of one 12” low-frequency/mid-frequency transducer (minimum 2.5” voice coil) employing advanced cooling technology, and a high-frequency section with custom Multidriver waveguide system incorporating a 1.4” exit compression driver with aluminium voice coil and titanium diaphragm, ensuring high intelligibility and consistent dispersion; the system shall provide a frequency range of 60 Hz – 20 kHz (-10 dB) and frequency response of 70 Hz – 18 kHz (±3 dB) with maximum SPL output exceeding 129 dB (LF) and 140 dB (HF), delivering high output capability suitable for medium to large auditoriums.The loudspeaker shall offer nominal coverage of 100° horizontal × 18° vertical, enabling precise audience coverage and array formation, and shall be acoustically optimized for use in arrays of up to 4 enclosures per vertical array, ensuring phase coherence and uniform sound distribution across the listening area ; the system shall have nominal impedance of 8 ohms (LF section) and shall support power handling of minimum 500W AES, 1000W program and 2000W peak (LF), suitable for use with external professional amplifiers; the enclosure shall include 2 × Neutrik NL4 connectors for input and link connections and shall support bi-amp or passive operation through appropriate processing.The cabinet shall be constructed from high-grade 15 mm birch plywood with durable polyurea coating for long-term reliability, and shall include a heavy-duty front grille with acoustic fabric backing for driver protection; the system shall incorporate integrated rigging hardware with adjustable splay angles (0°–6°) allowing flexible vertical array configuration, and shall be supplied complete with compatible flying frame, rigging accessories and mounting hardware for safe installation ; the loudspeaker shall be suitable for fixed installations, auditoriums, theatres and live performance venues, and shall be supplied complete with all necessary accessories, cabling interfaces and manufacturer authorization on company letterhead. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a compact two-way passive coaxial loudspeaker system suitable for short-throw and background sound reinforcement applications, comprising one 5″ coaxial transducer with a minimum 1.5″ LF voice coil and 1″ HF voice coil, capable of delivering a frequency range of 64 Hz – 20 kHz (-10 dB) and frequency response of 90 Hz – 20 kHz (±3 dB), with a sensitivity of 93 dB (1W@1m), nominal impedance of 16 ohms, and power handling of 150 W AES, 300 W program and 600 W peak, producing a maximum SPL in the range of 114 dB to 120 dB, and providing uniform 70° conical dispersion for consistent coverage; the enclosure shall be of bass-reflex design optimized for clear speech and music reproduction with low distortion, and shall be constructed from 9 mm premium birch plywood with durable Polyurea coating for long-term reliability in indoor installations; the system shall be compact, lightweight, and suitable for both fixed and portable applications, with provision for wall/ceiling mounting accessories; connectivity shall be via 2 × Neutrik Speakon NL4MP connectors; the loudspeaker shall be compatible with high-efficiency external Class-D amplification systems with recommended FIR-based DSP presets available through dedicated system processors, ensuring optimal performance, protection, and tonal consistency; the system shall be optimized for discreet architectural integration while maintaining high intelligibility and balanced frequency response, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: :LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a high-performance passive sub-bass loudspeaker system of approved makes suitable for professional auditorium, theatre and live sound reinforcement applications,the system shall comprise one 18” low-frequency transducer with minimum 4” voice coil, incorporating a high-efficiency neodymium magnet assembly and advanced cooling system for reduced power compression and improved thermal stability, ensuring high output and low distortion performance; the subwoofer shall provide a frequency range of 30 Hz – 140 Hz (-10 dB) and frequency response of 35 Hz – 125 Hz (±3 dB) with maximum SPL of not less than 132 dB, delivering deep and powerful low-frequency reinforcement suitable for medium to large auditoriums.The system shall have nominal impedance of 8 ohms, sensitivity of minimum 98 dB (1W/1m), and power handling capacity of 1200 W AES, 2400 W program and 4800 W peak, suitable for use with high-efficiency external Class-D amplifiers; the enclosure shall provide omnidirectional coverage and shall be optimized for both ground-stacked and flown configurations depending on system design; connectivity shall include 2 × Neutrik NL4-MP connectors for input and link operation, ensuring reliable and flexible system integration.The cabinet shall be constructed from high-grade 15 mm premium birch plywood with heavy-duty internal bracing to minimize resonance and distortion, and finished with durable polyurea coating for long-term reliability in professional environments; the enclosure shall incorporate aerodynamically optimized bass-reflex ports to reduce turbulence and port noise, and shall include a robust front grille with acoustic backing for driver protection; the system shall include integrated flying points and rigging provisions for safe suspension as part of a flown subwoofer array or cluster the subwoofer shall be designed for seamless integration with compatible full-range or line array systems, and shall be driven by dedicated system amplifiers with DSP-based processing including crossover, equalization, delay and protection functions to ensure optimal acoustic performance and system reliability; the unit shall be supplied complete with all necessary accessories, mounting hardware and manufacturer authorization on company letterhead. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of Rigging Frame for line array speakers & Subwoofers. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of wall bracket for fill speakers. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a high-performance self-powered stage monitor loudspeaker system of approved makes suitable for professional stage monitoring applications in auditoriums and live performance venues.The system shall be a two-way active coaxial design, comprising one 12” low-frequency transducer with minimum 3” voice coil and one high-frequency compression driver with minimum 3” voice coil and titanium diaphragm, ensuring coherent point-source performance, high intelligibility and uniform coverage across the monitoring area.The loudspeaker shall provide a frequency range of 60 Hz – 20 kHz (-10 dB) and frequency response of 75 Hz – 18 kHz (±3 dB), with maximum SPL of not less than 129 dB continuous and 132 dB peak, delivering high output capability suitable for stage monitoring of speech, vocals and instruments; the system shall provide nominal coverage of approximately 40° horizontal × 60° vertical, optimized for wedge monitoring applications with controlled dispersion and minimal feedback.The system shall incorporate integrated high-efficiency Class-D bi-amplification with total power of minimum 1500 W (LF: 750 W, HF: 750 W), powered by a switching-mode power supply with Power Factor Correction (PFC), ensuring stable operation over wide voltage ranges; the loudspeaker shall include onboard DSP processing with high internal resolution (minimum 56-bit) and FIR linear phase filtering, providing functions such as equalization, crossover, delay, and comprehensive protection including RMS limiting, peak limiting, thermal protection and system monitoring.The unit shall support analog balanced XLR input with loop-through output, and optional Ethernet connectivity for remote control and monitoring through dedicated software platform; the enclosure shall be constructed from premium 15 mm birch plywood with durable polyurea coating, featuring a robust steel front grille with acoustic backing, ergonomic handles, and wedge-shaped design suitable for stage floor placement; the system shall operate on 230V AC, 50/60 Hz and shall include Neutrik powerCON TRUE1 connectors with looping output, ensuring reliable power connectivity.The loudspeaker shall be suitable for use as stage monitors, side fills or portable reinforcement systems, and shall be supplied complete with all required accessories, cabling and manufacturer authorization on company letterhead, ensuring compliance with project specifications and long-term operational reliability. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a professional four-channel high-power Class-D power amplifier of approved makes suitable for driving line array systems, full-range loudspeakers and subwoofers in auditoriums, open-air theatres and large venue sound reinforcement systems; the amplifier shall be based on Class-D topology with high-efficiency switch-mode power supply (SMPS) and Power Factor Correction (PFC), ensuring high efficiency, reduced heat dissipation and stable performance under varying power conditions;the amplifier shall deliver a minimum output power of 4 × 2500 W @ 8 ohms, 4 × 4000 W @ 4 ohms, and shall support bridged mode operation up to 8000 W per channel, providing sufficient headroom for high-performance loudspeaker systems including line arrays and subwoofers; the unit shall have a frequency response of 20 Hz – 20 kHz (±1 dB) and total harmonic distortion of <0.5%, ensuring accurate and low-distortion audio reproduction;the amplifier shall provide a signal-to-noise ratio of ≥110 dB, high damping factor (>1000), and low crosstalk, ensuring precise low-frequency control and overall audio clarity; the unit shall support adjustable gain and input sensitivity compatible with professional DSP processors and mixing consoles;the system shall include balanced XLR inputs and professional speaker outputs via Neutrik Speakon connectors, ensuring secure and reliable connectivity; the amplifier shall incorporate comprehensive protection features including short circuit protection, thermal protection, overload protection, clip limiting, DC protection and soft-start circuitry, ensuring safe and reliable operation in demanding environments;the amplifier shall feature an integrated DSP (if applicable) with functions such as equalization, crossover, delay, limiter and preset management, enabling optimized system performance; the unit shall include a front-panel display (LCD/TFT) with control interface for monitoring and configuration;the amplifier shall be housed in a compact rack-mountable chassis (typically 1U–2U) with intelligent forced-air cooling system, suitable for continuous operation in indoor and outdoor environments; the unit shall operate on a universal power supply (100–240V AC, 50/60 Hz) and shall be suitable for installation in standard equipment racks;the system shall be supplied complete with all necessary accessories, interconnections and manufacturer authorization on company letterhead, ensuring compliance with project specifications and long-term reliability Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional high-power Class-D power amplifier of approved makes , designed for installation and live sound applications, featuring a high-efficiency switching-mode power supply with active Power Factor Correction (PFC) for reduced mains current consumption and stable operation over a wide voltage range of 100–260V AC, 50/60 Hz; the amplifier shall be available in high-power configurations including 2 × 4500 W, 2 × 3000 W, 1 × 9000 W and 1 × 6000 W, delivering a frequency response of 20 Hz – 20 kHz (±1 dB @ 8 ohms), total harmonic distortion of less than 0.5% at 1 kHz, signal-to-noise ratio greater than 110 dBA, crosstalk exceeding 70 dB (20 Hz – 1 kHz), input impedance of 20 kΩ, and adjustable gain between 32 dB and 41 dB, with a high damping factor greater than 5000 ensuring precise loudspeaker control; the unit shall incorporate comprehensive protection mechanisms including short-circuit, overload, auto-limiting, and AC/DC fault protection for reliable continuous operation; the amplifier shall provide high output power with optimized energy efficiency, with power consumption significantly reduced through PFC technology, and shall be housed in a compact 1U, 19″ rack-mount chassis featuring a front-panel 2″ TFT full-vision IPS color display for monitoring and configuration; the system shall be suitable for driving a wide range of high-performance loudspeaker systems and enable flexible system design with minimal amplifier models, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional high-power Class-D multi-channel power amplifier of approved makes, suitable for installation and live sound reinforcement applications, featuring a high-efficiency switching-mode power supply with active Power Factor Correction (PFC) for reduced current consumption and stable operation over a wide voltage range of 100–260V AC, 50/60 Hz; the amplifier shall be available in 2-channel and 4-channel configurations with output ratings up to 4 × 2500 W, 4 × 1500 W, 2 × 5000 W or 2 × 3000 W, delivering a frequency response of 20 Hz – 20 kHz (±1 dB @ 8 ohms), total harmonic distortion of less than 0.5% at 1 kHz, signal-to-noise ratio greater than 110 dBA, crosstalk exceeding 70 dB (20 Hz – 1 kHz), input impedance of 20 kΩ, adjustable gain between 32 dB and 41 dB, and a high damping factor greater than 5000 for precise loudspeaker control; the unit shall incorporate comprehensive protection circuits including short-circuit, overload, auto-limiting, and AC/DC fault protection, ensuring reliable long-term operation; the amplifier shall be capable of delivering high continuous output power with optimized mains consumption (approximately one-third of output power due to PFC efficiency), and shall be housed in a compact 1U, 19″ rack-mount chassis featuring a front-panel 2″ TFT full-vision IPS color display for monitoring and configuration; the system shall be designed for compatibility with high-performance loudspeaker systems, enabling flexible system configurations with minimal amplifier models, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional digital audio mixing console of approved makes designed for live sound reinforcement, auditorium, and installation applications, featuring advanced 96 kHz XCVI FPGA processing delivering ultra-low latency performance (≤0.7 ms) and high-resolution audio quality, with a minimum of 48 input processing channels, 36 buses, 12 stereo mixes plus LR, and 3 stereo matrices, along with 8 internal stereo FX engines with dedicated returns; the console shall provide a minimum of 24 onboard mic/line inputs (XLR) with recallable preamps and phantom power, additional stereo line inputs, and at least 16 balanced XLR outputs along with AES digital output, and shall support flexible routing and patching across all inputs and outputs; the system shall include comprehensive channel processing with 4-band fully parametric EQ, high-pass filters, gate, compressor, delay, and graphic EQ options on mixes, along with automatic microphone mixing capability; the control surface shall incorporate a minimum of 25 motorized faders arranged across multiple layers, a 7-inch capacitive color touchscreen interface, dedicated channel LCD displays, and assignable soft keys for intuitive operation; the console shall support remote control and monitoring via Ethernet using dedicated software and mobile applications, and shall include a built-in 32×32 USB audio interface for multitrack recording and playback along with direct USB recording capability; the system shall be expandable via SLink port for connection to remote stage boxes and shall include a 64×64 I/O expansion slot supporting audio networking protocols such as Dante, Waves, or MADI; the unit shall be housed in a robust chassis suitable for professional touring and fixed installations, and shall be supplied complete with all necessary accessories, software, and manufacturer authorization on company letterhead. Approved Make: Behringer / Yamaha / Allen&Heath

SITC of a professional remote audio expander / stage box of approved makes designed for live sound, auditorium, and installation applications, featuring a minimum of 16 remote-controlled mic/line inputs with high-quality recallable preamps and phantom power, and 8 balanced XLR outputs, operating at 96 kHz sampling rate for high-resolution audio performance with low latency; the unit shall be compatible with digital mixing systems via a single Cat5e/Cat6 connection using a proprietary or standard audio transport protocol (such as SLink), supporting connection to compatible digital mixers and expansion modules with redundant or daisy-chain capability; the stage box shall provide locking XLR connectors, status LEDs for signal and phantom power indication, and robust gain control and preamp recall from the connected console; the enclosure shall be of rugged construction suitable for stage floor or rack mounting, with provision for wall or stage installation, and shall be powered via an external PSU or PoE-compatible system as per manufacturer design; the unit shall support flexible placement on stage, minimizing analog cable runs and improving system noise performance; the system shall be suitable for integration in professional audio networks and shall be supplied complete with required power supply, mounting accessories, and manufacturer authorization on company letterhead.Make: Yamaha/Allen & Heath/Klark Teknik

SITC of a professional digital loudspeaker management system / DSP processor of approved makes featuring 4 analog inputs with additional AES3 digital input and 8 balanced XLR outputs, designed for high-performance sound system processing with support for input levels up to +24 dBu and a dynamic range of minimum 121 dB; the unit shall incorporate high-resolution AD/DA conversion with 32-bit converters and DSP processing with 64-bit double precision at 48 kHz, ensuring superior audio quality, low distortion, and accurate signal handling, with overall system latency not exceeding approximately 1.2 ms; the processor shall include advanced FIR linear phase filtering with up to 1000 taps per output channel, along with independent phase equalization capability and auto-equalization features allowing replication or matching of target response curves, including magnitude and phase adjustments; the system shall provide comprehensive equalization options including high-pass, low-pass, and multiple parametric EQ bands across input and output channels, along with configurable crossover filters (Linkwitz-Riley, Butterworth, Bessel up to 48 dB/oct), delay up to minimum 200 ms, and full matrix routing with simple, basic, and advanced (mixer mode) configurations; dynamics processing shall include dual-stage protection with RMS limiter-compressor (threshold in watts) and peak limiter (threshold in volts) per output channel, ensuring optimal transducer protection and performance; the unit shall support extensive preset management with storage capacity of up to 999 user, snapshot, and system presets, and shall offer control and monitoring via Ethernet and USB through dedicated software platform with features such as grouping, copy/paste, EQ import/export, and integration with measurement systems; the hardware shall be housed in a standard 19″ rack-mount chassis (1U), powered via universal switching power supply (85–240V AC, 40–400 Hz), with front panel IPS color display, encoder, and dedicated control buttons, and shall be suitable for fixed and touring applications, complete with manufacturer authorization on company letterhead and all necessary accessories and documentation. Approved Make:Extron/Lynxpro/BIAMP

SITC of Digital Wireless headset mic ; polar pattern: cardioid;pre-polarized condensor microphone;Audio frequency response: 20Hz-20KHz;Sound pressure level: 150 dB SPL;Sensitivity:1.6 mV/Pa;complete with all accessories as required. Approved Make: Sennheiser/ Shure/ DPA

SITC of set of antenna system set with 2 nos of antennas, antenna splitter, antenna cables . The antenna should be of same OEM as of microphones .System should be complete with all accessorie Approved Make: Sennheiser/ Shure/ DPA

SITC of Dynamic cardioid microphone with on/off switch for speech and vocals,frequency response 45 Hz- 16KHZ or better, nominal impedence 350 ohm or better,feedback rejection, rugged metal housing complete with all accessories Approved Make: Sennheiser/ Shure/ DPA

Supply and installation of drum kit with 7 microphone set Approved Make: Sennheiser/ Shure/ DPA

SITC of Professional installation projector featuring a bright single-chip DLP laser phosphor light engine with a native WUXGA (1,920 × 1,200) resolution and up to approximately 11,000 ANSI lumens brightness for clear, high-impact image projection. The projector supports 16:10 aspect ratio and delivers strong contrast performance with both sequential and dynamic contrast control for vibrant visuals and detail in diverse lighting conditions. A laser phosphor light source provides up to 20,000 hours of service life with low maintenance compared to traditional lamp-based designs, and constant light output (CLO) ensures uniform brightness over time. Connectivity includes multiple digital inputs such as 2× HDMI 2.0, 1× DVI-D, HDBaseT, and 3G-SDI, plus network control over RJ45, facilitating flexible integration with AV systems; support for 4K input signals (scaled to WUXGA) and active stereoscopic 3D capability expands usage across varied content formats. Installation flexibility is enhanced with wide optical lens shift, motorized zoom and focus, and compatibility with a range of interchangeable G-lenses. The projector is built for 360° orientation, supports embedded warp and blend via management tools, and offers low audible noise (~35–39 dB). Typical power input 100–240 V AC, robust casing and network control options make it suitable for conference halls, auditoriums, houses of worship, museums, and immersive environments where reliable, high-quality projection is required. Approved Make: Optoma / Panasonic / Barco

SITC of a heavy-duty motorised projection screen of approved makes designed for large venue applications including auditoriums, theatres, and convention halls, having a diagonal size of 371"(26 feet x 16 feet) in 16:10 aspect ratio, comprising a high-quality matte white projection surface with nominal gain of 1.0 ensuring uniform brightness, wide viewing angles, and accurate colour reproduction suitable for high-lumen laser projectors; the screen fabric shall be seamless or precision-joined with minimal visible joints, flame-retardant and mildew-resistant, and shall provide a smooth, flat viewing surface supported by tab-tensioning or equivalent system to prevent wrinkles and edge curling; the screen shall be housed in a robust heavy-gauge aluminium/steel casing with durable powder-coated finish, designed for ceiling or wall mounting, and shall incorporate a high-torque, low-noise tubular motor with smooth and reliable up/down operation, complete with limit switches for precise positioning; the system shall support multiple control options including wall switch, RF/IR remote, and dry contact/relay interface compatible with AV control systems, with provision for integration into centralized control platforms; the installation shall include all necessary mounting brackets, suspension hardware, power cabling, and control accessories, and shall be executed with proper alignment, leveling, and commissioning to ensure optimal screen flatness and performance; the system shall be suitable for continuous operation in professional environments and shall be supplied complete with manufacturer authorization on company letterhead along with warranty and all required documentation. Approved Make: Da-Lite / Draper / VAV/Telone

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

Supply, Installation, Testing & Commissioning of customised display mount for above displays

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

Supply, Installation, Testing & Commissioning of AI based Full 4K @ 60fps Presenter PTZ Tracking Camera with Dual Camera- one PTZ Camera for Presenter Tracking and second fixed lens Panoramic Camera. PTZ Presenter Camera should support min 30X Zoom and 8x Digital Zoom with Panning range of +170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees, Field of View for PTZ Camera should be min 58 Degree and for Panoramic Camera min. 85 Degree, camera should support simultaneous outputs through HDMI, 3G-SDI, USB 3.0 and IP with 1x Audio In and can be controlled via RS232 and IP. Should support multiple video streams with PIP. Tracking Camera should support Everywhere Tracking, Partition Tracking, Auto Framing & Gesture Control. Should support PoE+ and Virtual USB Driver. Quoted model should be BIS, CE, FCC , Clickshare & RoHS Certified with Test Lab Reports. Approved Make: Lumens/ Sony/ Datavideo

SITC of IP+RS 232/VISCA based Joystick Controller SITC of Joystick with 3" LCD for Preview Monitoring, PAN/Tilt/Zoom Control, Communication via IP & RS232C/RS455 Interfaces, Auto Backlit Keys, Should be able to control minimum 200 Cameras on IP & 10 Cameras through RS232/422, Should support VISCA, VISCA Over IP protocols & PoE. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports. Approved Make: Lumens/ Sony/ Datavideo

SITC of a professional 1G AV over IP encoder of approved makes capable of encoding high-quality video and audio signals for transmission over standard IP networks supporting HDMI 2.0 and VGA input interfaces with maximum input resolution up to 4K UHD (4096 × 2160 @ 60Hz, 4:2:0) and delivering encoded output up to 4K @ 30Hz (4:4:4) with visually lossless compression and ultra-low latency performance suitable for real-time applications; the unit shall transmit AV signals over Cat6/6A/7 cabling via Gigabit Ethernet (RJ45) and support multicast streaming enabling one-to-many and many-to-many distribution across multiple decoders without dedicated matrix hardware; the encoder shall support embedded and de-embedded audio, HDMI audio formats including LPCM and bitstream, and shall be compliant with HDCP 2.2 for secure content transmission; the device shall include control interfaces such as RS-232, IR (in/out), and USB for KVM functionality, enabling remote control of source devices over the IP network; the system shall support Power over Ethernet (PoE IEEE 802.3af) as well as external DC power supply for flexible installation, and shall be compatible with centralized control systems for matrix switching, video wall configuration, and system management via intuitive web-based GUI; the encoder shall be housed in a compact, robust metal enclosure suitable for continuous professional use in auditoriums, command centers, and broadcast environments, with low power consumption (approx. 7–10W) and reliable operation in typical indoor conditions, complete with all required accessories and manufacturer authorization on company letterhead. Approved Make: Crestron/AMX/Lumens

SITC of a professional 1G AV over IP decoder of approved makes capable of decoding high-quality video, audio and control signals over standard IP networks supporting HDMI 2.0 output with maximum resolution up to 4K UHD (4096 × 2160 @ 30Hz, 4:4:4) and 4K@60Hz (4:2:0), delivering visually lossless video with ultra-low latency suitable for real-time applications; the unit shall receive AV streams via Gigabit Ethernet (RJ45) over Cat6/6A/7 cabling and support multicast streaming enabling one-to-many and many-to-many AV distribution without dedicated matrix hardware; the decoder shall include multiple outputs including HDMI and VGA for display connectivity, along with digital (S/PDIF) and analog stereo audio outputs, and shall support HDMI audio formats including LPCM and bitstream; the system shall provide USB over IP functionality with minimum 2 × USB 2.0 and additional USB ports for keyboard, mouse and peripheral connectivity enabling full KVM control of remote computers, along with RS-232, IR (in/out) interfaces for device control and integration with third-party control systems; the decoder shall support HDCP 2.2 compliant content, built-in scaling and frame rate conversion to ensure compatibility with different display resolutions, and shall allow creation of video walls with portrait and landscape orientation; the unit shall support Power over Ethernet (PoE) as well as external power supply, with low power consumption and reliable operation, and shall be configurable via web-based GUI with compatibility for third-party control platforms; the device shall be housed in a compact, robust enclosure suitable for continuous professional use in auditoriums, control rooms and AV installations, and shall be supplied complete with all necessary accessories and manufacturer authorization on company letterhead. Approved Make: Crestron/AMX/Lumens

SITC of a centralized AV over IP system controller of approved makes designed for management and control of distributed AV over IP systems capable of controlling multiple encoders and decoders over standard IP networks enabling flexible matrix switching, video wall creation, and KVM functionality from a single interface; the controller shall support centralized management of AV streams with the ability to route any input source to any display output through an intuitive web-based graphical user interface (GUI) with drag-and-drop functionality, real-time preview, and customizable layouts, supporting group control, macro commands, scheduling, and automation features for seamless operation , the system shall include dual Ethernet ports (dedicated control and AV network), HDMI output for monitoring, USB interface for KVM control, RS-232, IR and trigger ports for integration with external devices and third-party control systems; the controller shall support Power over Ethernet (PoE IEEE 802.3af) as well as external DC power supply with low power consumption (approx. 3W), and shall be capable of operating in conjunction with AV over IP encoders and decoders to enable scalable, low-latency video distribution across multiple zones , the unit shall be housed in a compact, robust metal enclosure suitable for continuous professional operation in auditoriums, control rooms, and enterprise environments, and shall be supplied complete with all required accessories, software, and manufacturer authorization on company letterhead.Approved Make: Crestron/AMX/Lumens

SITC of a professional all-in-one portable video production and streaming system of approved makes comprising a 12-channel HD digital video switcher integrated within a hand-carry portable suitcase unit, supporting video formats 1080p, 1080i and 720p, designed for live production, streaming and recording applications; the system shall provide a minimum of 12 video inputs including 8 × 3G-SDI and 4 × HDMI inputs supporting resolutions up to 1080p50/60, and a minimum of 9 video outputs including 5 × SDI assignable outputs, 1 × HDMI assignable output and 3 × HDMI program outputs, with flexible crosspoint (XPT) assignment; the switcher shall support advanced video processing features including MIX, CUT, WIPE transitions (minimum 32 patterns), DVE effects, minimum 4 upstream keyers (USK) with chroma key capability, minimum 2 downstream keyers (DSK) with key and fill, and multi-window display capability with up to 8 Picture-in-Picture (PiP) layers including flexible source assignment; the system shall include an integrated character generator (CG) interface (such as CG-200 or equivalent) supporting insertion of static and animated graphics/logos (minimum 2 configurable layers), lower thirds, titles and overlays, and shall support advanced transitions including stinger transitions suitable for live events and sports applications; the unit shall incorporate a built-in minimum 17.3-inch Full HD monitor for multiview and preview/program monitoring, along with an integrated H.264 hardware streaming encoder and recorder capable of simultaneous live streaming and recording over IP networks and local storage; the system shall support audio embedding/de-embedding, multi-channel audio mixing, and synchronization with video inputs, and shall provide control via built-in panel, external control interfaces and network-based management; the unit shall be housed in a rugged portable enclosure suitable for field and auditorium use, with reliable power supply, efficient cooling, and continuous operation capability, complete with all required accessories, cabling and manufacturer authorization on company letterhead.Approved Make:Blackmagic Design/Datavideo/AIDA

SITC of Customised Metallic house structure, powder coated with caster wheels & brakes. Drawer for keyboard, mouse and document camera. Wooden Top Tray for placing document & Laptop. All drawers sliding tray and doors should be Lockable. External Connectivity: Cablecubby provision Having 1 X USB A,1 X C-USB,1 HDMI IN,Power Socket with ON/OFF. One MIC XLR for microphone; Motorized tilting adjustment for chainging viewing angle. Minimum 6 Universal rating 5 Amp Socket. Provision to fix Logo space at the front side. Provision of 19"inch Rack inside podium to fit in international standerd equipment. Access doors for servicing both from front and back side of the podium. Wire manager on left & right side and at bottom for flexibility of managing additional wire/wiring. ( FULL HD ) 22”LCD Tablet Monitor with Resolution 1920 x 1080 . View Area 476.64(H) x 268.11(V)mm – 22 inch. Luminance ,White 250 cd/㎡. Colour : 16.7M, Dynamic Contrast Ratio 50,000:1 . Viewing Angle 85˚+85˚H and 80˚+80˚ V. Lamp Life Time 20,000 Hrs (min ). Technology Electromagnetic Resonance. Detectable Height 3~10mm. Position Report Rate 138pps. Pressure Resolution 1024 Level. CapacitiveTouch Technology:Projected Capacitive. Detacted object Fingers, or Conductive material. Tracking speed : 133<-/Capacitive single :100:Multy:95. Accuracy : +-0.5mm /+-3mm (Edge)3mm wide. Detect height 0-10mm. Touch Points 10 Points.Approved Make: UNI/AHA/VACOM

Floor Box:- Supply, Installation, Testing & Commissioning of Floor BOX with Power/LAN/XLR Connectivity Approved Make:Ahuja/VAV/Custom

Floor Box:- Floor Box : 4 x XLR Point Input Stage / Floor Box Approved Make:Ahuja/VAV/Custom

Floor Box:- Floor Box : 2 x XLR Point Input Stage / Floor Box Approved Make:Ahuja/VAV/Custom

SITC of Integrated Controller, Dual Network Interface card, Should support IPv6 ,Should Supports IEEE Standard for Port-based Network Access Control with the ability to grant or deny network access to devices wishing to attach to a LAN based on credentials tied to the device rather than to a user ,Should have High Performance Architecture, Flexible Programming Platform (Java) ,Should have ability to manage secure port TLS and SSH communications with a remote device or server Enhanced Diagnostics On Serial and IR Ports ,Hardware / Software should be Built for 24/7/365 Operation ,Should have Ultra-Fast 1600 MIPS processor , 512 MB Onboard RAM , 1 M Non-Volatile Memory, 8 GB SDHC FLASH Memory ,1 RU Rack Space ,10/100 LAN Interface ,4 Digital I/O Ports , 1 RS-232/422/485 Port , 3 RS-232-Only Ports , 4 IR/Serial Output Ports , 4 Relay Ports ,Regulatory Compliance :RoHS ,WEEE.Approved Makes AMX/EXTRON/CYPRESS

SITC of 10.1”Table Top Touch Panel ;Display Size 10.1” Diagonal;Display Type TFT-LCD, IPS;Resolution:1920x1200;Aspect Ratio:16:10 landscape;Brightness 350 nits (cd/m2);Contrast Ratio >800:1;Illumination: LED backlight;Touch Overlay:Capacitive touch; >5 points touch panel with palm rejection and wet finger operation. Anti-fingerprint; Anti-microbial coating;RAM:4GB, LPDDR4;Storage:16 GB eMMC;RJ-45, POE 802.3af, 15.4W;USB Type C OTG, USB Type 2.0;Camera:5MP front-facing, with Fixed Focusing Lens;Speakers:2 x 2W;POE:RJ-45, POE 802.3af, 15.4W Approved Makes AMX/EXTRON/CYPRESS

SITC of i7 PC with 16GB RAM, 500 GB SSD .For Soft VC and Operation.Approved Make: Dell/HP/Acer

SITC of Wireless Access Point.Should have one 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink™ (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Should have Internal antenna 3.8/4.5dBi (2.4GHz/5GHz).Should have standards IEEE 802.11AX,IEEE 802.11ac,IEE 802.11n standard, 2.4GHz and 5GHz,WMM - Wireless MultiMedia Prioritization,WDS- Wireless Distribution System,Power over Ethernet (PoE) IEEE 802.3af/802.3at.Should have security features like Wi-Fi Protected Access (WPA3),SSL,Wireless access control to identify authorized wireless network devices,MAC address filtering with access control,Basic Service Set Coloring (BSS Coloring),Security Socket Layer (SSL) remote management login.Should have Remote configuration and management feature through Web browser, SNMP or Telnet. setup, monitoring and management through Standalone, Software\ Cloud based controller and Mobile App. Manageability As standalone and If software\ Cloud based controller than 5 years cloud licence should be including without extra charges. Should have advance wireless features like OFDM/OFDMA, Wireless backhaul to form Mesh Network,Bridge mode: Point-to-multipoint wireless WDS mode, Adjustable Transmit Power Control (TPC) Device detection.PoE power consumption should not be more than 25.5W Watts.Bandsteering, Guest Network/Captive Portal, Bandwidth management, Link Layer Discovery Protocol.Target Wake Time (TWT) feature.Block SSID Broadcast feature.can be Ceiling mounting/ Wall mounting.Should be from the same OEM as Ethernet switch.No repair products & replacement with New box.Lifetime free latest firmware support. Approved Make: Dlink/ Netgear/ Cisco

SITC of a fully managed AV over IP network switch of approved makes specifically designed for professional audio-visual applications comprising 24 × 10/100/1000 Mbps RJ45 PoE+ ports (IEEE 802.3at) with minimum 30W per port and a total PoE power budget of 300W, along with 2 × additional Gigabit RJ45 uplink ports and 4 × SFP fiber uplink ports for flexible connectivity; the switch shall support Layer 2 and Layer 3 switching features including VLAN, QoS, Link Aggregation (LAG), IGMP snooping/multicast management, DHCP server, IPv4/IPv6 support, and advanced security features such as DHCP snooping, RADIUS authentication and storm control; the unit shall be optimized for AV over IP applications with built-in IGMP Plus™ for automatic multicast configuration, pre-configured AV profiles for common protocols such as Dante, AES67, NDI, NVX, AMX, Q-SYS and similar systems, and shall provide a dedicated AV-friendly graphical user interface (GUI) in addition to standard IT management interfaces (Web GUI, CLI, SNMP, SSH); the switch shall support high performance with switching capacity of minimum 60 Gbps and forwarding rate of approximately 44.64 Mpps, along with jumbo frame support up to 12 KB and MAC address table size of minimum 16K entries; the device shall include USB ports for management, console interfaces, internal power supply, and support Power over Ethernet distribution for AV endpoints such as encoders and decoders; the unit shall be housed in a 1U rack-mountable chassis with rear-facing ports for clean AV rack integration, low-noise cooling (~34 dB) suitable for control room environments, and shall operate on standard AC power with maximum consumption around 400W under full load; the switch shall be supplied complete with rack mounting accessories, cables, and manufacturer authorization on company letterhead, and shall be suitable for continuous operation in professional AV installations such as auditoriums, command centers and broadcast environments. Approved Make: Dlink/ Netgear/ Cisco

Supply, Installation, Testing & Commissioning of Cables & connectors(Speakers,Audio,Cat x, hdmi etc) for connecting the entire AV equipment of Auditorium, Conference Room & Lobby Make: Falcon/Stecker/Dlink/Digisol/MX/Linetech

SITC of camera wall mount metal stand. It should be constructed with durable material and can be attached right side up or upside down, depending on camera configuration and requirment. OEM accessory will give a perfect fit and features pre-drilled installation hardware and cable holes. Make: Custom

SITC of 42U Floor standing rack with caster wheels. It should have cable entry from top and bottom.Should have front glass door with lock.Should have threeshelf tray.(1U/255mmD),PDU6x5Amp,Fan 90CFM,Mounting hardware(Packet of 10). Make: Prinet/Dynamic/APW president

SITC of professional monitoring headphones with linear sound reproduction, folding and rotating earcupes, frequecy response 10 Hz - 22 KHz or better,max SPL 112 dB or more complete with all accessories Make:Sennheiser/ Shure/ DPA

SITC of tall adjustable microphone stands with tripod base complete with all accessories as required. Make: Ahuja / hercules / i&A stands

SITC of Short stands complete with all accessories as required.Make: Ahuja / hercules / i&A stands

SITC of Active DI Boxes for electronic instruments Powered by +48 V phantom power with a 9 V battery backup Signal levels ranging from +10 to +50 dBu Frequency response from 10 Hz to 90 kHz (±3 dB) Earth Lift Switch.Make: BSS/Behringer/Klark Teknik

SITC of LED PAR light comprising RGBW LED source, beam angle 15°–30°, suitable for side lighting and effect lighting applications, with smooth dimming, DMX512 control, die-cast aluminium housing, and flicker-free operation.Make: ASL/Equivalent

SITC of professional LED Cyc light / asymmetric wall washer designed for uniform illumination of cyclorama, comprising RGBW or RGBA LED source (minimum 150W), wide asymmetric beam distribution for even top/bottom coverage, high color mixing capability, smooth dimming (0–100%), flicke.Make: ASL/Equivalent

SITC of professional moving head light comprising minimum 250W–300W LED source, with motorized pan/tilt, zoom function, color wheel, rotating gobos, prism effects, smooth dimming (0–100%), strobe effects, DMX512 control, multiple operational modes, LCD display, and flicker-free operation suitable for auditorium stage lighting and event applications. Make: ASL/Equivalent

SITC of professional digital lighting control console supporting minimum 512 DMX channels (expandable), control of intelligent fixtures, scene-based programming, minimum 200 scene memory, playback faders, chase functions, dimmer and RGB/RGBW control, intuitive user interface, USB/Ethernet connectivity, backup capability, and standalone operation.Make: Pearl/Equivalent

SITC of DMX splitter with minimum 1 input and 4–8 optically isolated outputs, ensuring signal integrity and protection for lighting network, complete with connectors and termination support.

SITC of dedicated 3-phase lighting distribution panel, fabricated from MS sheet, powder coated, comprising MCCB/MCB protection, phase balancing, individual outgoing circuits for lighting fixtures, RYB indication, voltmeter/ammeter, earthing provision, and suitable for stage lighting load distribution.

SITC of Cable Tray of size 40x75x40mm with 1.6 mm thickness

SITC of Light socket box 4"x4" with 15 Amp multi socket

SITC of C Clamp

SITC of safety chain

SITC of lighting bars fabricated from MS pipe (minimum 40 NB), powder coated black, complete with suspension system, clamps and supports, suitable for mounting lighting fixtures at FOH and stage positions, with adequate load-bearing capacity.

SITC of DMX signal cable (shielded twisted pair) with connectors, termination, testing and commissioning for complete lighting system.

SITC of power cabling for lighting fixtures including connectors, distribution boxes and termination.

SITC of XLR connectors as required

SITC of motorized main stage curtain made of high-quality fire-retardant velvet fabric (minimum 350 GSM) conforming to NFPA 701 / BS 5867 standards, in approved colour, with horizontal traveler arrangement; complete with heavy-duty straight drapery track of open frame design, fabricated from powder-coated steel, supported on suitable brackets; curtain runners with nylon wheels and oil-impregnated bearings for smooth operation; master carriers with steel cable arrangement (minimum 3 mm dia), end stops, pulleys, and track accessories including joining plates, overlap carriers and guides; complete with motorized drive system (minimum 1.5 HP, 3-phase or suitable single phase as per design) with reduction gearbox, limit switches for open/close positions, and control through wall-mounted push button station (open/close/stop) and control panel; curtain shall be double pleated with minimum 900 mm center overlap; complete in all respects including installation, testing and commissioning as per site requirements.Width-44m(approx),Height-8m(Approx)

SITC of main valance made of same fire-retardant fabric as main curtain, stitched in 1:2 pleating, complete with cotton dori, eyelets and mounting arrangement using suitable MS pipe (minimum 25 mm dia) painted black; fixed above proscenium opening to conceal curtain track and lighting fixtures, complete with all accessories and installation as per drawings.Width : approx 22 to 24 m ; height :1.2 m to 1.5 m

SITC of stage border curtains made of fire-retardant black crepe fabric (minimum 280–300 GSM), stitched in 1:2 pleating, complete with mounting arrangement using MS pipes (minimum 25 mm dia) painted black, suitable for installation above stage at multiple levels for masking of lighting fixtures and rigging; complete with all accessories and installation.

SITC of Stage Legs (Side Wing Curtains) made of fire-retardant black velour/crepe fabric (minimum 300 GSM) complying with NFPA 701 / BS 5867, stitched with 1:1.5–1:2 fullness, complete with reinforced header, eyelets, bottom pipe pocket, heavy-duty manual track system with runners, carriers, MS support pipe, clamps, brackets and all accessories; installed in multiple rows on both sides of stage with proper overlap and alignment; complete installation, testing and commissioning as per approved drawings and site conditions.Height: 8.0 m (± site condition);Width per leg: 2.5 m to 3.0 m;Overlap: Minimum 150–300 mm between adjacent legs

SITC of rear blackout curtain made of fire-retardant black fabric (minimum 300 GSM) with horizontal sliding arrangement, complete with heavy-duty drapery track, runners, master carriers, steel cable system, pulleys and accessories similar to main curtain; complete with motorized operation (minimum 1.5 HP motor) with limit switches and control panel; curtain to be double pleated with minimum 900 mm overlap; complete installation, testing and commissioning as per site conditions.

SITC of side ladders (lighting booms) fabricated from MS rectangular tubes (minimum 50 × 25 mm, 16G) welded construction, finished with black powder coating, complete with mounting clamps, base plates and provisions for fixing stage lighting fixtures at multiple heights; complete installation as per stage design.

SITC of stage valance support bar fabricated from MS pipe (minimum 40 NB / 48 OD) in dual barrel configuration, painted black, suitable for supporting front valance and masking curtains, complete with suspension system, clamps and accessories; installed as per approved drawings.

SITC of cyclorama system comprising supply and installation of seamless white cyclorama fabric (matte finish, fire-retardant, minimum 300 GSM) suitable for projection and stage lighting applications, stretched over a rigid MS frame fabricated from MS pipes (minimum 40 mm dia) and MS angles (minimum 35 × 35 × 5 mm), properly anchored to wall/floor with holdfasts; frame to be painted with red oxide primer and black finish paint; fabric to be fixed with uniform tension using suitable fastening system (velcro/dori/track as required); complete installation ensuring wrinkle-free surface for uniform projection and lighting effects.Width- approx 26 m, Height- apporox 6 m

SITC of motor control panel for stage curtain system, fabricated from MS sheet with powder-coated finish, comprising contactors, overload protection, MCB/MCCB, limit switch integration, push button stations (open/close/stop), emergency stop, phase indication (RYB), power indication, internal wiring and terminal blocks; suitable for safe operation of curtain motors and integrated with stage electrical system; complete installation, testing and commissioning.

Supplying, and placing in position of sofa of Durian Make - Berry/55001 as per Image .classic Contemporary design and slender curves. . The Sofa of stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa. Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Leatherette, the sofa makes a fantastic first impression. The Cushioning is moulded such that it flows along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa The seat cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyester poly fill outer layer of 200 gsm. The polyester poly fill keeps the upholstery wrinkle free & soft. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, GREEN PRO / GREEN GUARD Certification, AIOTA Certification, BIFMA Certification, GRIHA Certification and from the approved make of Durian, Godrej, HNI, Rockworth, Haworth, Featherlite, Fabteq, Geeken. The product should be as per above given specification under the guidance of project architect & Engineer in charge. 1 seaterDimension (W)1905mm X (D)890mm X (H)870mm

Supplying, and placing in position of main Table as per Image/ drawing of Fabteq make - FS-711 (Model No.).The Table top made out of 32mm thk prelam particle board with 2mm thk pvc edge banding & side panel & modesty panel made up of 25mm thick pre-laminated particle board .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & central Locking arrangement. The table have a provision of free standing Side Storage of size 1200mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having a provision of 3 drawer unit, one openable shutter with D shape handle & central locking arrangement, one open storage with shelf in it . The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, GREEN PRO / GREEN GUARD Certification, AIOTA Certification, BIFMA Certification, GRIHA Certification and from the approved make of Durian, Godrej, HNI, Rockworth, Haworth, Featherlite, Fabteq, Geeken. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Providing and fixing 9 " long and 20mm thick and 50 mm depth grouted on the wall MS powder coated lettering for front gate with following lettering " Ustad Bismillah Khan Sangeet Mahavidyalay, Dumraon, Buxar ."

Amount of EMD (In Rs-):-92,65,500/-

Time of Completion:-17 Months

Description of Item

ACOUSTICAL DOOR (HIGH PERFORMANCE – DOUBLE SKIN COMPOSITE TYPE) : Providing and fixing in position factory-fabricated acoustical door assembly comprising of solid wood frame of finished size 150 x 80 mm (±2 mm tolerance), kiln-seasoned and chemically treated, fixed with approved anchor fasteners. Door shutter shall be minimum 75 mm thick, constructed with internal hardwood grid framework (Solid wood) at maximum 600 x 600 mm c/c, infilled with 50 mm thick polyester fibre insulation of minimum 1000 GSM and density not less than 24 kg/m³, combined with high-density sound barrier membrane of minimum 3 mm thickness (min. 4 kg/m² mass loaded vinyl or equivalent) provided continuously on both faces. Both faces of shutter shall be finished with 12 mm calibrated BWR grade plywood and 1.0 mm thick high-pressure laminate, factory pressed under controlled conditions to ensure uniform bonding. All edges shall be lipped with hardwood of minimum 8 mm thickness, machine finished. Shutter shall be provided with perimeter acoustic sealing system including EPDM/neoprene gaskets, and drop-down acoustic seal at bottom to ensure airtight performance. Doors without complete sealing system shall be rejected. The complete door assembly shall achieve minimum STC 35–40. Hardware shall include minimum 4 nos. SS heavy-duty hinges (150 mm), mortise lock, SS handle, door closer, and all necessary accessories, suitable for acoustic application.

Frame shall be finished with polish/paint as per approved scheme, and shutter with approved laminate finish including decorative mouldings / trims as per architectural drawings. Rate shall include all required cut-outs, hardware fixing, sealing system, edge finishing, accessories, wastage, and complete installation as per direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Shining Sun / Viraaj Extrutech / Absolute Solutions / Audible.

STAGE WOODEN FLOORING : Providing and fixing in position teak wood stage flooring system comprising of machine-cut tongue & groove teak wood planks of size 20 mm (±0.5 mm) thickness, 70 mm (±1 mm) width and random lengths between 750 - 1200 mm, kiln-seasoned to moisture content 8–12%, with uniform grain and shade. Planks shall be fixed over 18 mm thick BWR grade plywood using approved adhesive and concealed nailing system, ensuring tight joints with maximum gap not exceeding 0.5 mm. The plywood shall be supported on hardwood sub-frame of section 45 x 35 mm, spaced at maximum 600 mm c/c (±5 mm tolerance), rigidly fixed using metal clamps and dash/anchor fasteners. All timber members shall be seasoned and treated with anti-termite and anti-fungal chemicals. Below the framework, 8 mm thick elastomeric shock absorption pads (minimum density 600 kg/m³) shall be placed at required intervals to provide resilient performance and load distribution. A continuous polyethylene vapor barrier (minimum 150 microns) shall be provided between sub-frame and base surface to prevent moisture ingress. The complete system shall be installed ensuring level variation not exceeding ±2 mm over 3 m span, with proper expansion gaps at periphery. Top surface shall be machine sanded (multi-stage sanding) and finished with minimum 3 coats of high-performance melamine coating, including sealer and top coat, achieving uniform matt/satin finish with anti-skid properties.

Uneven sanding, patchiness, or visible joints shall not be accepted. shall deliver impact vibration absorption suitable for auditorium use. Rate shall include complete sub-frame, shock pads, vapor barrier, fixing of teak planks, sanding, polishing, edge finishing, cut-outs, skirting interface, wastage, and installation, excluding cost of plywood , all as per drawings and direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Shining Sun / Viraaj Extrutech / Absolute Solutions / Audible.

ACOUSTIC CARPET FLOORING WITH UNDERLAY : Providing and fixing in position heavy-duty woven pile carpet of total thickness not less than 10 mm, having pile height minimum 6 mm, minimum pile weight 1000 GSM. Carpet shall be laid over closed-cell cross-linked polyethylene acoustic foam underlay of minimum 6 mm thickness and density not less than 30 kg/m³, having impact sound reduction properties, properly fixed to subfloor using approved adhesive. . Installation shall be carried out using full spread adhesive method, ensuring tight joints with seam strength not less than manufacturer’s standard, No visible joints. The complete system shall achieve impact sound reduction, Rate shall include surface preparation, adhesive, underlay, cutting, edge finishing, skirting interface, wastage, and complete installation as per drawings and direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Milliken / Shaw Contract / Nexgen.

Audi. Hall wall Panelling

Providing and fixing acoustic wall panelling consisting of 2x50 mm (making box) in vertical studs of GI framework of India Gypsum ltd placed at 610 mm c/c vertically and horizontally fixed on wall with cleats (GI supported systems) and supplying and fixing 50mm thick glass wool with black glass fibre tissue facing (32 kg/cum) of U.P. Twiga and held in place at rear and front with 22 swg x 12. X12.5 mm gi chicken wire mesh with 25 mm air gap in the rear. In front, Providing and fixing Black cotton/jute @ Rs 50 /Rmt 40mmx 15mm European steam beech wood slats over a backing of 12mm thick duro marine ply strips 100mm wide at 610mm centre to centre fixed with screw/ rawel plugs etc if necessary as per architect’s direction. European steam beech slats to be melamine matt polished. The gap between the slats to be 8 mm. This paneling is proposed to be upto ceiling level from ground and at all sides of the front stage from bottom to the ceiling. (Fixed to the satisfaction of architect )

WOODEN SKIRTING : Providing and fixing in position machine-finished teak wood skirting of 15 mm thickness and 100 mm height, made from kiln-seasoned teak wood with moisture content between 8–12%, free from warping, cracks, or visible defects. Skirting shall be factory polished with minimum 3 coats of melamine finish (matt/satin), including sealer and top coat, achieving uniform shade and smooth surface. All edges shall be machine-cut with slight chamfer/rounded profile, and skirting shall be fixed using concealed screws with wooden plugs and approved adhesive, ensuring tight joints with maximum gap not exceeding 0.5 mm. Joints shall be properly aligned and finished without visible mismatch. Skirting shall be installed true to line and level, with proper alignment to wall finish and flooring junction. Necessary grooves/rebates (if required) shall be provided for flush integration with wall paneling or flooring system. Back surface shall be treated with anti-termite and moisture-resistant coating prior to installation. Rate shall include all necessary cutting, edge finishing, fixing hardware, adhesive, polishing touch-ups, wastage, and complete installation as per drawings and direction of Engineer-in-Charge.

AUDITORIUM SEATING -Godrej Jupiter Mid Back chair(with cupholder) MB (PUSH BACK TYPE - HIGH PERFORMANCE):The seat shall be made of Polyurethane Foam moulded with 1.5 ±0.1cm. thk. plywood insert measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric. Approx. Seat Size shall be: Depth: 42.0cm, Width @ rear: 44.0cm. Width @ front: 41.0cm. The back assembly shall be flexing type and made of Polyurethane Foam moulded with MS. tubular frame insert and shall be upholstered with fabric and back cover. The insert shall be made of 01.9 ±0.02cm x 0.16 ±0.0.128cm. thk.MS tubular frame with flexible nylon straps running across the length and width of the frame. Approx; Back-Size shall be: Height: 65.5cm, Width @ top: 34.5cm. Width @ seat level: 46.0cm. The HR polyurethane foam shall be moulded with density = 45 +/-2 kg/m3. The back cover and mechanism cover shall be vacuum formed from black ABS sheets. The Armrest understructure shall be upholstered PU foam moulded with MS insert. Arm tops shall be made of black Integral Skin polyurethane with 50-70 Shore 'A' Hardness & reinforced with wooden insert. Armrest width= 7.0 ±0.5cm and shall be offered as common/individual armrest between chairs.

• MS black powder coated (DFT 40-60 microns ) understructure with integrated, auto tip-up mechanism which folds the seat when not in use. • Footprint area of base plate shall be made of HR steel 15.0 ±0.2cm X 22.0 ±0.2cm X 0.5 ± 0.05 cm thick. • Backrest supporting beam width shall be-46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2 ±00.16cm MS tube. • Understructure fixed to ground by 200 mm to 250 mm Hilti hheavy duty dash fastners. The auditorium chair shall be designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368. Overall Dimensions of Chair shall be Seat Height - 46.5 cm, Height - 89.0 cm, Width & Depth of Chair Width(w1)-53.0cm(individual), width(W2) - 60.0 cm.(common arm) and Depth-69.0 cm.(normal) , Depth(D2)- 54.0(seat folded).UPHOLSTERY: Stitched fabric upholstery should be as per following specs. Std fabric (Glory shades) Wt.: 320 gm/running meter Fabric width: 1.2 M Specs: 100% Polyester

Providing & fixing ‘Unistone’ Wall Cladding Clay Tiles in size 230mm X 75mm X 17 mm thick in approved natural clay shade or ‘Terracotta’ non-pigmented made from natural clay. The appearance and shade of tiles should be natural terracotta having subtle variation in shade. The tiles would be made from special clay and firing temperature would be more than 1100 Celsius. The allowed variance in these tiles should not be more than ± 2.5 mm & top surface should be coated with Silicone and surface water absorption should not exceed 1% and by immersion method it should be less than 10%.

Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/Tubular Structure ( MS built-up section :-Rolled section & plates confirming to IS 2062 Grade Yst 350,Tubular Structure:- made from Steel hollow sections, ISI marked from SAIL / RINL / TATA/JINDAL, conforming to IS 1161/4923/1239, Minimum Yst 240 thickness upto 10mm ) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc. With special plate connectors, pinion joints, plates, hollow sections including Preparation of detailed fabrication and erection drawings of Structural steel work from design drawings issued by Engineer-In-Charge and incorporation of Engineer-In-Charge's comments on same, ransportation from fabrication yard, cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to make structure of Tensile Membrane shade. The tubular structure system with plate connectors, pinion joints, etc. is to be provided. The structure has to be provided as per conceptual drawings of Tensile fabric profile , including all arch beam, curved lateral beams and bracings, vertical support columns, nodal joints, ,bases of columns and high tensile bolts of grade not less than 10.9 having black phosphate coating. The complete structure to be Hot Dip Galvinized along with one coat of epoxy primer and two coats of Polyurethane paint on steel work at all locations prepared by sand blasting in required minimum 210 micron DFT (dry film thickness) for each coat as specified in particular specification. The work is to be executed as per technical specification and direction of Engineer-In-Charge.

Design, Supply Fabrication and installation of tensile membrane fabric type II -900 gsm ( Serge Ferrari) , Tenseo Edition TXS 900 F (B4616) both side PVDF coat,the base yarn should be better protected with thicker coating process for greater performance against UV exposure,Total Thickness-0.78mm,Acoustic Performance-Weaking Index-14dBA-ISO717-1,Light Transmission-5% UV Transmission 0%,yarns should be pre-stress with tensile strength 420/ 400 daN/ 5cm, tear strength 55/ 50 daN as per manufacturer's specification and 10 yearsmanufacturer warranty.Flame Retardancy B-s2-d0/EN13501-1, make Serge Ferrari or Verseidag equivalant. Including cutting, welding and cables, plates and necessary hardware for fixing the fabric as per approved shape.serge ferrari fabric manufacturer authorisation letter required. Membrane shall be cut and manufactured with high frequency PVC welding machine, cost of all materials complete as per directions.Quality in conformity with ISO9001,Enviornmental communication in conformity with ISO14021.

Providing and fixing white vitreous china wash basin under counter / Table Top basin, with C.I. concealed type brackets fixed to walls with GI rag bolts or approved fasteners etc., including 32 mm CP brass waste coupling, including painting of fittings and brackets, cutting and making good the walls wherever required all complete (Granite counter top will be measured and paid separately under relevent item): as per approved make and decision of engineer-in-charge

Providing and fixing CP brass auto closing system basin pillar tap / hand wash as approved by Engineer- In Charge

Providing and fixing CP brass single lever mixer system basin pillar tap / hand wash as approved by Engineer- In Charge

Providing & fixing in position GI 100x50 elbow floor drain including cost of cutting and making good the walls and floors wherever required.

Providing and fixing 125 mm dia S/S grating (with or without hole)for floor or Nahani trap.

Providing & Fixing water cooler wth stainless steel having storage capacity of 80 liter & cooling capacity 60 liter / hour with Reverse osmosis system & ultra voilet membrane TDS reduction 90% having automatic back wash system with filteration unit & all other required accessories complete in all respect as per direction of the engineer in charge .

Providing and fixing hand held ablution fitting (health faucet) with 1.2 meter long flexible tube and wall hook, all complete approved engineer-in-charge

Supply and fixing of 15mm CP brass 2 -Way Bib Cock with wall flange and suitable length CP brass extension pipe all of approved engineer-in-charge

Supply ,Erection , Testing & Commissioning of Automatic water level control panel & related accessories for pumping automation with consisting of automatic water level controller , level sensor with stainless steel probe, motorized butterfly valve, motorized valve controller with complete in all respect. upto 50 mm dia. nominal bore

Providing and fixing HDPE Pop Up Sprinkler Irrigation System Pop height 100 mm with fittings all complete as per direction of engineer in charge.

Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete.

Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x 0.90 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in PO red colour suitable to accommodate, internal hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be fixed inside the FHC Cabinet Complete as required .

Supplying, installation, testing and commissioning of weather proof M.S hose cabinet of size 750 x 600 x 250mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following: - (for yard hydrant)

Providing and fixing standard firemans axe with heavy rubber handle.

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm.

Providing and fixing Fire Extinguishers (CO2 type powder ) 4.5 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers (A, B, C type powder ) 6 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing 25 mm dia Inspector Test Valve 25 mm with drain arrangement complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers Clean Agent capacity 2 Kg. complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers 50ltr. (Water & Foam type) complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers consisting of welded M.S. cylindrical body automatic modular CO2 type extinguisher.(Capacity 22.5 Kg.) complete with all accessories as per manufacturers specifications.

Design of lifts:- Passengers Type Capacity:-13Passengers Speed - 1.5 Metre/Sec. (MPS) Door Operation - Full Height Infra-red cross-multi beam Floor - B+5 = 6stops Travel - 22Mtr. (Approx.) Stop & Opening - 6 Stops & 6Openings (One side only)

Power - 415 V ±10%, 3 Phase, 50 Hz. Type or Design of Lift Car - Stainless steel scratch proof (Moon Rock Finish). Car door - Power operated centre opening horizontal sliding stainless steel Scratch proof (Moon Rock Finish) Door Safety - Full Height Infra-red cross-multi beam

Landing doors - Centre opening, stainless steel scratch proof (Moon Rock Finish) at all floors. It must be fire-rated for minimum 1-Hrs and supplier must provide the certiifcate for the same alongwith material supply. Car operating Panel / Landing operating panel - Car operating panel with braile symbol luminous buttons and braile illuminated push buttons on all landing in Stainless Steel Mirror finish. Hand rail - Shall be SS finished not less than 600mm long, fixed above 900mm from the car-floor level on rear-wall or side wall. Voice announcement system - In car to announce the position of the elevetor in hoist way as the car passes or stop at a floor served by the elevator.

Intercom system, Complete as Described above

Same as item above but Secondary point. i.e. Points to be looped with Primary point with 2.5 sqmm wire and Point wiring

Supply, Installation, Testing and Commissioning of 5W Mirror Light.

Supply, Installation, Testing and Commissioning of 100W Led Spot Light.

UPS SYSTEM:- Supply, installation, testing & commissioning of One Set of 1 Nos , 8 KVA UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 90 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other.

Supply, installation, testing & commissioning of One Set of 1 Nos , 4 KVA UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 90 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other.

LIGHTNING PROTECTION Supply of Lightnig counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, meet the requirements for IS/IEC 62305 and IEC 62561-2.Tested for Electrical ,Mechanical and Chemical as per IEC 62561.

Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections.

11 KV HT DP STRUCTURE

RSJ pole of 9.15 mt length of size 175 x 90 mm complete with suitable M.S. base plate welded at bottombase plate - 2 Nos.

MS Channel of size 100 x 50 mm, length 4 mts (approx)

11 KV AB switch - 1 set

11 KV Horn Gap fuse Unit - 1 set

11 KV Lightning Arrestor

11 KV Disc insulator

11 KV Pin insulator

6 SWG copper wire for jumpering

Supply and erection of Stay set complete with necessary foundation, excavation and refilling of earth etc. as required.

Concrete foundation for RSJ poles burrioed upto a depth of 1830 mm in ground in a pit of size 450X450 mm in CC 1:3:6 along with 200 mm copping above ground inclusive of earth work.

Necessary Nut, Bolts, clamps, operating handle for AB switch, clamping welding etc. complete as required.

Painting the RSJ poles complete with two coat of Red Oxide and two coats of GI enamel paints complete as required.

11 KV H.T. METERING PANEL (INDOOR TYPE):

Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger ( SMPS Based ) with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 12 Nos. 20/16A DP MCB's (D.C. duty) as outgoing complete as required and as directed by Engineer Incharge.

DISTRIBUTION TRANSFORMERS

Supplying of following size of aluminum conductor, XLPE insulated armoured and over all PVC sheathed, 11 KV (E) grade earthed cable as per relevant IS code and technical specifications

Supply of fire buckets 4 No. in each set duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. Fire buckets shall be painted red from outside and white from inside with additional handle at the bottom and suitable for outdoor installation.

Supply and fixing on position the approved Single Line Diagram framed in 1000 x 800 mm size glass frame and installed in main switch room as directed by Engineer Incharge

Supply of First Aid box as directed by Engineer Incharge

Supply of tool kit with 1 pair 11 KV rubber hand gloves as directed by Engineer Incharge.

Supplying & fixing standard shock treatment charts in English & Hindi duly framed and covered with glass as directed by Engineer Incharge.

Providing Safety mat made of elastomeric polymers Material (Class B) 1.2 M wide with thickness 2.5 mm to withstand 12KV dielectric strength AS PER relevant IS Code

Providing a mat made of elastomeric polymers Material (Class A )1.2 M wide with 2 mm thickness to withstand 1.1 KV dielectric strength AS PER relevant IS Code

500 KVA (With Outdoor Acoustic Enclosure)

250 mm dia

SS Flexible Bellow 250 mm dia

Aluminium cladding for the Residential type silencers

MAIN LT PANEL

STAF QUARTER (TEACHING) PANEL

STAF QUARTER (NON TEACHING) PANEL

PRINCPAL QUARTER VTPN DB

AUDITORIUM & ACADEMIC BLOCK VTPN DB

2C x 6 Sq.mm.

2C x 4 Sq.mm.

3C x 6 Sq.mm.

3C x 4 Sq.mm.

4CX 2.5 Sq.mm

4C x 4 Sq.mm.

4C x 6 Sq.mm.

1C X 50 sqmm Cu flexible(Unarmoured) cable

7 C x 1.5 Sq.mm.

12 C x 2.5 Sq.mm.

4C/3C x 6/4 sq.mm.

4C/3C/2C x 4/6/2.5 sq.mm.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 6 sq. mm (28mm)

Raceways and Floor outlet box

150 mm x 40 mm x 2 mm thick

100 mm x 40 mm x 2 mm thick

50 mm x 40 mm x 2 mm thick

Supplying, installation, testing and commissioning of Gate light fitting suitable for 42 watt IP 65LED having system lumen output of minimum 4200 lumens complete with all accessories and lamp.

Supplying, installation, testing and commissioning of 70W LED Solar Street Light On 6 Meter GI octagonal Pole having Compact, Aesthetic, Eco friendly & modern integrated Solar street light in extruted Aluminum construction with high efficiency monocrystalline silicon photo voltaic panel, high efficacy SMD LED 6500K having secondary lens optics for street lighting distribution, high performance lithium battery, MPPT charge controller & Intelligent control module/sensor with higher reliability, long service life, suitable for easy & quick installation.

Providing, installation of 200 x 150 x 125 mm polycarbonate weather proof (IP-55) junction box and SP MCB’s and terminal block.

Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete.

Supply, Installation, Testing & Commissioning of 16TB Surviellance Hard Disk. Approved Makes: WD /segate /Toshiba/HP

Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display Panel. Approved Makes: Panasonic / LG/ Sony/ Samsung

SITC of Category 6 RJ45 Unshielded Modular Jack, ISO/IEC 11801:2nd edition, EN 50173-1, ANSI/TIA/EIA 568-C.2 Category 6, IEC 60603-7 (603-7), Interoperable and backwards compatible with Cat.5e, Universal 110 Impact Tool & Tooless (Both) Termination, Min. 250Mhz Bandwidth, 1G BASE T, IDC >= 200 Re-Terminations, >= 750 Plug Mating Cycles, 1.5A Current, 30lbs Plug Retention, UL Certified UL 1863, Strain Relief boot for Pairs, Bend Limiting Boot for Cable, Without Any OEM Proprietary Tool Termination Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24-Port 1U / 48-port 2U Unloaded Universal Modular Straight Patch Panel preloaded with cable support Bar (with slots to tie individual cable properly at the Support Bar), Stainless Steel Rear Metal Frame, Individual Port Transparent Shutter and Labelling, Preloaded earthing plug for surge protection, UL 1863 Complied, CRC Metal with Black Powder Coated, RoHS Compliant, Individually Replaceable Port IO, (Shuttered IO not recommended, because when shutter gets malfunctioned then entire IO is of no use) Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6 Patch Cord U/UTP Unshielded 24AWG Bare Copper, Stranded Flexible Conductor, HDPE Insulation, LSZH Jacket, ANSI/TIA 568C.2 Category 6 Patch Cord, Support 1GBASE-T with Min. 250Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.0mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, PC UL94-V-0, Factory assembled with Transparent Premoulded Boots, Length 1 Meter. ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6 Patch Cord U/UTP Unshielded 24AWG Bare Copper, Stranded Flexible Conductor, HDPE Insulation, LSZH Jacket, ANSI/TIA 568C.2 Category 6 Patch Cord, Support 1GBASE-T with Min. 250Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.0mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, PC UL94-V-0, Factory assembled with Transparent Premoulded Boots, Length 3 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of UK Style (Square) Keystone-Type Shuttered Faceplates, 1, 2 & 4 port configurations, White Color, Elegant 2 Piece (2 Plate) design for better aesthetics , Cover and Base Plastic Material ABS-UL94-V2, 86 x 86mm Approved Makes: Derwiser/Nexans/Siemon/Systimax

Supply, installation, testing and commissioning of 5 MP (2502 x 1944) Dome camera ,ONVIF profile S , G & T, M. CE , FCC Certified ,1/2.7” Progressive Scan CMOS. Color 0.004lux, Shutter speed1/5~1/200000s,I/O,1INand1OUT,DC12V/PoEIEEE802.3af).265/H.265+/H.264/H.264+/MJPEG, 256Kbps ~ 8Mbps, 256GB SD Card, Triple Stream, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, NFS/SMB/CIFS, SSL/TLS, P2P. Analytics: Face Recognition, Pedestrian & Vehicle, Intrusion, Line Crossing, Object Detection, Crossing Counting, Heat Map, Crowd Density, Queue Length, License Plate, Rare Sound, Intrusion, Region Entrance, Region Exiting. 7 users, IP67 & IK10, -30～+60°C, AES 256. Approved Makes :Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, installation, testing and commissioning of 5 MP (2502 x 1944) Bullet camera ,ONVIF profile S , G & T, M.CE , FCC Certified ,1/2.7” Progressive Scan CMOS. Color 0.004lux, Shutter speed1/5~1/200000s,I/O,1INand1OUT,DC12V/PoE(IEEE802.3af),H.265/H.265+/H.264/H.264+/MJPEG, 256Kbps ~ 8Mbps, 256GB SD Card, Triple Stream, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, NFS/SMB/CIFS, SSL/TLS, P2P. Analytics: Face Recognition, Pedestrian & Vehicle, Intrusion, Line Crossing, Object Detection, Crossing Counting, Heat Map, Crowd Density, Queue Length, License Plate, Rare Sound, Intrusion, Region Entrance, Region Exiting. 7 users, IP67 & IK10, -30～+60°C, AES 256. Approved Makes :Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, installation, testing and commissioning of 256 channel, Live and recording resolution up to 12MP, Recording bandwidth Incoming 1024 Mbps and outgoing 800 Mbps, RAM 32 Gb*2, Support RAID 0/1/5/6/10, Support Face detection and Recognition with Face Capture/Register quantity 1000000/ 10000, 512 User list, display out 3 HDMI and 1 VGA port, HDD: 16 SATA HDD Slots, Each SATA support up to 18TB, Operating temperature -10°C~+50°C. Approved Make:- Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 24*10/100/1000M RJ45 ports and 4*1/10G SFP+ fiber slot ports, Port 1-24 can support IEEE 802.3af/at PoE standard, switching capaticy of 598 Gbps, forwarding performance 95.23 Mpps, maximum PoE output power is 400W(at-600W), with 32K MAC address. Should have Static Routing , system logging, Telnet, SSH2.0, SNMP V1/V2C/V3, Network Time Protocol (NTP), FTP, TFTP, Xmodem. Approved Make :Cisco/ Impulse / Juniper / Nexxus

Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 10*10/100/1000M RJ45 ports and 4*100/1000M uplink SFP slot ports, Port 1-8 can support IEEE802.3af/at PoE. Support DC dual power supply input and DIN rail mounting. Switching capaticy of 256 Gbps, forwarding performance 20.83 Mpps, having 8 x 10/100/1000BASE-T PoE-plus(RJ45) with maximum PoE output power is 120W(at-240W). , with 2*10/100/1000Base-T uplink RJ45 ports 4*100/1000Base-X uplink SFP slot ports., 8K MAC address. Should have Static Routing , system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), and IPv6 features from day 1. Approved Make :Cisco/ Impulse / Juniper / Nexxus

Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest. Approved Makes: HP / DELL / IBM / LENOVO

Supplying, installing, testing and commissioning approved make Addressable Multi-criteria Photo-Thermal Above False Ceiling Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. The detector sensitivity (day & night) shall be controlled from the panel to get accustomed to the local environment.The detector shall comply UL268, 7th Edition guidelines. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supplying, installing, testing and commissioning approved make Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Detector shall comply UL521 guideline. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supplying, installing, testing and commissioning approved make Addressable Loop Powered Autoaligned Beam Detector. The beam detector shall be used for High Ceiling application with a detection range from 5 upto 100 mtrs and highly resistant to building movement; tolerates +/- 1° movement, Resistant to solid object intrusion, , Built-in imager heater, Resistant to strong light sources; does not alarm when saturated by sunlight, Automatic sensitivity threshold level settings and drift compensation. The detector shall be IP-55 compliant. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supply, Installation, Testing & Commssioning of 1X500W Class-D Amplifier, which can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection and High Efficiency Class D Power Amplifier, 500W, 100V/70 Output, with 100 - 240 VAC input and 24 VDC backup power Supply

Supply and drawing of 2 C X 1.5 Sq mm multi stranded twisted shielded FRLS Copper cable.

SITC of Armoured 06 Core Singlemode (OS2) 9/125 Fiber Cable, ITU/T G.652.D, IEC 60794-1 Complied, Outdoor ECCS Armored Fiber Cable with PBT Loose Tube Filled With Thixotropic Jelly, Uni-Tube, 2 Steel Wire Embedded In HDPE Jacket, Water Swellable Tape Under Armor, UV-HDPE Jacket with 1.5mm Thickness, 7.5 +/- 0.5 mm Overall Diameter, Crush Resistant 2000N/100mm, Tensile Resistant 1000N, Bend Radius : 20 x Cable Diameter, Operating Temperature : -20 to + 60 Deg C, Max. Attenuation @1310nm & 1550nm : <= 0.35dB/km & <= 0.22dB/km Respectively, Cladding Non-Circularity ≤1%, Mode Field Concentricity Error ≤0.6 um, Coating/Cladding Concentricity Error ≤ 12 um, Nominal Weight 65Kg/km, Black Color Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 6 Port 1U x 19” LIU Loaded with Singlemode OS2 LC Adapters & LSZH Pigtails along with Splice Trays, Min. 4 No of Circular Cable Entry with Rubber Groummet/Glands to close any open entry, Cable Holders for Cable Entry Inside Panel, Heat Shrink Tubes for Splices, Tube for open fibers, Ties, Panel shall be Powder Coated with Min. 1.2mm Metal Sheath, 30 Years Channel Warranty. Factory Loaded LC Type LSZH Pigtails should meet IEC 61034-1 ,IEC-60332-1, IEC-60754-1, Insertion loss <= 0.35 dB, Return Loss >= 50, Attenuation: 1310/1550 : 0.3/0.2 dB/KM, Repeatability: <= 0.2DB 1000 Times Mating Cycles, RoHS Complied, Meets ANSI/TIA 568.3-D Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24 Port 1U x 19” LIU Loaded with Singlemode OS2 LC Adapters & LSZH Pigtails along with Splice Trays, Min. 4 No of Circular Cable Entry with Rubber Groummet/Glands to close any open entry, Cable Holders for Cable Entry Inside Panel, Heat Shrink Tubes for Splices, Tube for open fibers, Ties, Panel shall be Powder Coated with Min. 1.2mm Metal Sheath, 30 Years Channel Warranty. Factory Loaded LC Type LSZH Pigtails should meet IEC 61034-1 ,IEC-60332-1, IEC-60754-1, Insertion loss <= 0.35 dB, Return Loss >= 50, Attenuation: 1310/1550 : 0.3/0.2 dB/KM, Repeatability: <= 0.2DB 1000 Times Mating Cycles, RoHS Complied, Meets ANSI/TIA 568.3-D Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Fiber Patch Cord, LC Duplex - LC Duplex, 9/125μm OS2 Singlemode Duplex Zip Cord (<= 2.0mm), IL <= 0.35dB, RL>= 50dB, LSZH Jacket IEC 60332-1, Operating Temperature -40°C to +85°C, Meets ANSI/TIA 568.3-D, Length 3Meter Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat 6A, 23 AWG Bare Copper Solid Conductor U/UTP Unshielded LSZH Jacket (Min. 0.8mm Thickness), ANSI/TIA 568 C.2 Category 6A, Flame Rating IEC 60332-1, Halogen Acid IEC 60754 -1, Smoke Density IEC 60134-2, ISO/IEC 11801–2nd Edition, Min. 500 Mhz Bandwidth, Min. 10G BASE T, 7.2 mm Nominal Diameter, HDPE Insulation with Diameter 1.08 +/- 0.05mm, No Shield/Non Metallic Barrier Tape Inside Cable, Breaking Strength : >= 400N, Conductor Resistance <= 7.5 Ω /100m, Min. Elongation at Break of Insulation : 300%, Min. Jacket Tensile Strength >= 10 N/mm2 (Mpa), Dielectric Strength: DC 1500 V /Min., Euroclass Eca, RoHS Complied, Operating Temperature -20 to + 75 Deg C, IEEE 802.3bt Type 1, Type 2, Type 3, Type 4 PoE Complied, Propagation Velocity : 69% (nominal), Cable Roll of 305 Mtr, Cable shall not have any kind of Non Metallic Barrier Tape or Metallic Shield inside Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Category 6A RJ45 Unshielded Modular Jack, ISO/IEC 11801:2nd edition, EN 50173-1, ANSI/TIA/EIA 568-C.2 Category 6A, IEC 60603-7 (603-7), interoperable and backwards compatible with Cat.6, Universal 110 Impact Tool & Tooless (Both) Termination, Min. 500Mhz Bandwidth, 10G BASE T, IDC >= 200 Re-Terminations, >= 750 Plug Mating Cycles, 1.5A Current, 30lbs Plug Retention, UL Certified UL 1863, Strain Relief boot for Pairs, Bend Limiting Boot for Cable, Without Any OEM Proprietary Tool Termination Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24-Port 1U / 48-port 2U Unloaded Universal Modular Straight Patch Panel preloaded with cable support Bar (with slots to tie individual cable properly at the Support Bar), Stainless Steel Rear Metal Frame, Individual Port Transparent Shutter and Labelling, Preloaded earthing plug for surge protection, UL 1863 Complied, CRC Metal with Black Powder Coated, RoHS Compliant, Individually Replaceable Port IO, (Shuttered IO not recommended, because when shutter gets malfunctioned then entire IO is of no use) Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6A Patch Cord U/UTP Unshielded 24AWG Bare Copper Stranded Flexible Conductor, HDPE Insulation, Transparent Cross (+) Filler Between Pairs, LSZH Jacket, ANSI/TIA 568C.2 Category 6A, Support 10GBASE-T with Min. 500Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.2mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, Factory assembled with Transparent Premoulded Boots, Length 1 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6A Patch Cord U/UTP Unshielded 24AWG Bare Copper Stranded Flexible Conductor, HDPE Insulation, Transparent Cross (+) Filler Between Pairs, LSZH Jacket, ANSI/TIA 568C.2 Category 6A, Support 10GBASE-T with Min. 500Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.2mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, Factory assembled with Transparent Premoulded Boots, Length 3 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of UK Style (Square) Keystone-Type Shuttered Faceplates, 1, 2 & 4 port configurations, White Color, Elegant 2 Piece (2 Plate) design for better aesthetics , Cover and Base Plastic Material ABS-UL94-V2, 86 x 86mm Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 42U Floor Standing Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment to conforms to DIN 41494 or equivalent ISO standard.Front Door should be Lockable Toughened Glass Door, Steel Single, Steel Dual. Standard Finish should be Powder Coated with Black colour. Mounting Option : Castor wheels (Front 2 wheels with Break and rear without break) Or Levelers Or Base plinth. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Size Options : 600 x 600 mm / 600 x 800 mm / 600 x 1000 mm / 800 x 1000 mm / 800 x 1200 mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 22U Floor Standing Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment to conforms to DIN 41494 or equivalent ISO standard.Front Door should be Lockable Toughened Glass Door, Steel Single, Steel Dual. Standard Finish should be Powder Coated with Black colour. Mounting Option : Castor wheels (Front 2 wheels with Break and rear without break) Or Levelers Or Base plinth. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Size Options : 600 x 600 mm / 600 x 800 mm / 600 x 1000 mm / 800 x 1000 mm / 800 x 1200 mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 15U Wall Mount Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment.: Conforms to DIN 41494 or equivalent ISO standard. Standard Finish should be Powder Coated with Black/Gray colour. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 450/500/600mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 6U Wall Mount Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment.: Conforms to DIN 41494 or equivalent ISO standard. Standard Finish should be Powder Coated with Black/Gray colour. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 450/500/600mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 15U Weatherproof Outdoor Enclosure. Wall / Pole Mount Outdoor IP65 grade or BETTER Steel. Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.. Steel,Racks should be made out of steel and proceeded with CNC Punching, forming, welding and powder coated. Front Door with IP 65 Filter & hood , IP Compatible lock. CRCA Sheet Steel, Flush Mounted with Gasket seal. # Door opening 130º angle with concealed hinges. Top and bottom panel Welded to frame with cable entry exit cut outs in Bottom. Canopy made from CRCA steel sheet folded & welded with cut-outs for air exhaust. Removable canopy for maintenance purpose. Welded Construction with Special Dual Coat Powder coated. Lockable Metal Front Plain Door.Colour coat RAL 7035. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 400/600mm

Supply, Installation, Testing & Commissioning of Core switch minimum 48 x10G SFP+ Port, 4xQSFP28 Port.2XQSFP+ Ports Should have RPS and hot swappable PSU option from day 1. Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. switching capacity of1.92Tbps, forwarding performance 1400 Mpps, should have non-blocking architecture, 64K MAC address. Should have Static Routing, RIP, VRRP, OSPF ,BGP,PBR, PIM-SM,PIM-DM ,OSPFv3 ,VRF,ECMP.BFD - BGP,BGP4+,RIPng,URPF,ISATAP Tunnel from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of 24 port Distribution switch minimum 16 x10G SFP+ Port, 4xQSFP28 Port.8XSFP28 Ports.Should have RPS and hot swappable PSU option from day 1. Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. switching capacity of1.52Tbps, forwarding performance 1130 Mpps, should have non-blocking architecture, 64K MAC address. Should have Static Routing, RIP, VRRP, OSPF ,BGP,PBR, PIM-SM,PIM-DM ,OSPFv3 ,VRF,ECMP.BFD - BGP,BGP4+,RIPng,URPF,ISATAP Tunnel from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of Access switch 24x 1G PoE/PoE+ and 4 x 1/10GSFP+ ports. Should have hot swappable RPS from day 1, Should have AC and DC PSU mix and match arrangement for power source resiliency in the same hardware .Min 370 Watt PoE/PoE+ power budget . Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. Switching capacity of 168Gbps, forwarding performance 124 Mpps, should have non-blockingarchitecture,32KMACaddress.ShouldhaveStaticRouting,RIP,VRRP,OSPF,OSPFv3,RIP,BFDOSPF,BGP,PBR,ECMP,VRRP from day 1, Should support ISSU from day 1, Should support stacking with min 12 members in a stack(Stacking ports should be exclusive of above mentioned ports), Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1, MTBF Min 198000 Hrs. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of 8 Port POE+ Access Switches with switching capaticy of 96 Gbps, forwarding performance 71 Mpps, having 8 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 125W, with 4 x 10G SFP+ uplink ports. Should Non Blocking architecture , 16K MAC address. Should have Static Routing ,RIP,VRRP, OSPF from day 1,Should support ISSU from day 1 ,Should support stacking with min 12 members in a stack, Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr Approved Make : Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of fiber Modules 1000BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of fiber Modules 10G BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of fiber Modules 40G BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of ITAM Web Appliance Hardware: Rack based Intel Core i7 or better, 3.20GHz w/ HD Graphics, Memory 32GB 4x8GB DDR4 2666MHz, Minimum 1 TB SATA/SSD Drive, Integrated NIC, COTS Compliant.Web Appliance Software: Capture specifications, warranties, Serial Numbers, MAC Addresses, IP info, what other H/W relates/connects to this H/W, item status, event logs, assignees, Specifications, License information, Aprroved Makes:F5/ Palo-alto / Juniper / Nexxus/Arista

Supply, Installation, Testing & Commissioning of 4x4 Access Point Ceiling Mount having 1 x 2.5GE (PoE/PoE+) port , 1 x G Copper port .For 2.4G 2*2 MIMO, For 5G 4*4 MIMO .Built-in omnidirectional internal antennas, Dual frequency with min 6 Stream .For 2.4G: 3dBi and for 5G: 3dBi.200 square meter coverage (without any obstacle).Maximum number of users per band should be minimum 128. power consumption:18W. Encryption: AES, WPA3\802.11i: Supported, Authentication: MAC Address/PSK, Client isolation: Both Layer-2 wireless client isolation and SSID isolation, forwarding security: Packet filter, MAC address filter, and broadcast storm suppression, SSID-VLAN binding: Supported, Management frame protection (802.11w): Supported. Should be CE, FCC, CCC, ROHS certified. Access Points should have option to be managed by cloud infrastructure without replacing the hardware in future required. Approved Make : Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of Pure IP at core server Based voice solution with 04 Port Voicemail ,04 Port FXS ,04 Port FXO , 1 PRI Trunk lines (30 Channel x 1 = 30) Circuit with CLIP Facility ,33 IP users & 250 analog user License ,01 Nos. IP Operator Console, 100 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, TEC should be with GR Number, - Should Support Redundant server in active-Active mode.

Supply, Installation, Testing & Commissioning of Type 1 IP Phone 2 VoIP account, 120x40 Dot-matrix screen with backlight, Full HD duplex speaker phone, IPV6, Gigabit Ethernet, PoE .

Supply, Installation, Testing & Commissioning of Type 2 IP Phone with 4 Voip accounts, 4 line keys, 3.5-inch (480x320) Colour Screen display with backlight, GigE, colour displays for 6 DSS keys, IPV6, 2 x Gigabit Ethernet , PoE.

Supply ,Installation ,Testing & Commissioning of 4 Door 4 reader access control panel with with buttons for entering and reading cards and exiting the door, Large capacity of 24,000 users, 100,000 offline storage records. TCP/IP high-speed communication, convenient LAN and WAN wiring, The card reader can be connected to the international standard Wiegand 26bit-34bit Powerful functions. In addition to the access control function, the software also presents attendance, online patrol, conference sign-in, fixed consumption, WEB mother card function, and more cost-effective. Approved Makes : Lenel / Honeywell / Impulse

Supply, Installation , testing and commissioning of 12 V SMPS DC Power Supply Unit, highly regulated and spikes free terminal voltage and heavy sourcing current for regulated terminal voltage. Approved Makes : Lenel / Honeywell / Impulse

Supply & Installation of Operation system: Windows xp and the upward system, such as: Windows 2000 、Windows XP 、 Windows7、Windows Vista、windows nt、Windows 2000 sever、Windows 2003 、Windows Server 2008 and so on Database :MS Access (the default database after installation is the bringing small database of operating system) MS SQL Server (suggest more than 200 people, or swiping card every day more than 1000 records, had better choose to use this article database.) Approved Makes : Lenel / Honeywell / Impulse

Supply, Installing, Testing & Commissioning of fingerprint, IC/ID swipe card Fingerprint capacity: 1000 pieces Short Range Multi Technology Smart Card Reader UL Listed For Exit of Lift Access Doors, tripod/Flap barrier- Entry & Exit (doors) as per the specification, with back plate & Back Box. Approved Makes : Lenel / Honeywell / Impulse

Supply ,Installation ,Testing & Commissioning of Smart Card Contactless transmission of data and supply energy (No battery needed), Operating Distance: Upto 100mm (Depending on Antenna Geometry), Operating Frequency: 13.56 MHZ. Approved Makes : Lenel / Honeywell / Impulse

Supply ,Installation ,Testing & Commissioning of Electromagnetic Lock 600 lbs, Single leaf, LED Status Display, Approved Makes : Assa Abloy / Ablesco / Impulse / BEL

Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23 AWG LSZH as per ANSI/TIA 568 C.2 and ISO/ IEC 11801–2nd Edition, ROHS Compliant, solid copper conductors, tested @250 Mhz, with HDPE insulation of individual conductor and over all Dia of 5.8mm for Connectivity of Hub room to End Point. Approved Makes: Derwiser/Nexans/Siemon/Systimax

Supply and Laying of 8 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers & the access controllers) Approved makes : Polycab/ Havells/Bonton/KEI/Fionlex

Supply and Laying of 4 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers & the access controllers) Approved makes : Polycab/ Havells/Bonton/KEI/Fionlex

Supply ,Installation ,Testing & Commissioning of U/L Clamp made of aluminium anodised for EM Lock. Approved Makes : Assa Abloy / Ablesco / Impulse / BEL

Supply , Installation , Testing and commissioning of Exit push button as required. Approved Makes : Lenel / Honeywell / Impulse

Supply and Fixing of 25 mm dia MS Conduit. Approved Makes : AKG / BEC / MK

Supply, installation, testing and commissioning of automatic electromechanical boom barrier suitable road width 5-7 mtrs for intensive applications, high speed with 4-6 second opening/closing time with Aluminium housing & aluminium boom with fork rest, IP 67 Protection etc. (for Gate Entry/Exit) Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of a set of Entry/Exit push buttons for manual open and closing of barriers etc. complete as required.(for Gate Entry/Exit). Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of Photocell based safety device to avoid closing of the barrier when a Vehicle is crossing the barrier. ( Anti Fall Protection ). Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply installation, testing and commissioning of Remote & Receiver. Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of Loop detector for closing of the barrier when a Vehicle crosses the barrier. Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply, Installation, Testing & Commissioning of Long Range RFID reader with controller 10-12 mtr read range with suitable mounting arrangement for Outdoor Application and shall be compatible with boom barrier integration Approved Makes:- Speedgatz, Synergy, Kaba

Supply Installation Testing & Commissioning of 3mtr pole for mounting of RFID reader with all accessories complete as required. Approved Makes:- Speedgatz, Synergy, Kaba

Supply and programming of Wigand Proximity Cards/RFID Tagsa with credibility of having integrated 50 Readers integrated with Booms as a unified solution along with facility code as per specifications Approved Makes:- Speedgatz, Synergy, Kaba

Inline Fans

Air Quantity : 250 CFM

Air Quantity : 300 CFM

Air Quantity : 400 CFM

Air Quantity : 500 CFM

Air Quantity : 600 CFM

Plastic Propeller Fans

Air Quantity : 100 CFM

Air Quantity : 150 CFM

AXIAL FLOW FANS

Duty: Lift Well Pressurisation

Duty: Lift Lobby Pressurisation

Duty : Stair case pressurisation

Duty: Normal & Smoke Exhaust for Basement

Duty: Normal & Fresh Air in case of fire for Basement

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaust for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaust for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaus for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaus for Corridor

CONTROL & TRANSMISSION WIRING

Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for transmission

Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for remotes

DRAIN PIPING

25 mm dia

32 mm dia

REFNET (Y-JOINT )

Supply,installation,testing and commissioning of Y - Joints with necessary fittings as per specification.

VRV/VRF Central Controller for Indoor & Outdoor Units

Supplying, installing, testing and commissioning of Fresh Air powder coated Anodized extruded aluminium construction fresh air louvers (50 mm deep) (Fresh air louver with VCD , bird screen & rattle-free) complete as per specification.

Supplying, installing, testing and commissioning of Exhaust Air powder coated Anodized extruded aluminium construction fresh air louvers (50 mm deep) air louver without VCD , bird screen & rattle-free)complete as per specification.

Supply,installation and testing of double layer flexible duct connector consisting of a flame retardant fabric secured to extruded aluminium frame on both sides to provide a wear resistant airtight flexible connection. Fabric shall be mildew resistant, water proof and silicon impregnated.Flexible connector shall be supplied in accordance with the specifications and drawings.

MAIN HVAC PANEL

OUT DOOR PANEL

VENTILATION PANEL

SITC of high-performance passive constant curvature line array loudspeaker system of approved makes comprising a two-way passive design suitable for professional auditorium and installation applications. The enclosure shall consist of one 12” low-frequency/mid-frequency transducer (minimum 2.5” voice coil) employing advanced cooling technology, and a high-frequency section with custom Multidriver waveguide system incorporating a 1.4” exit compression driver with aluminium voice coil and titanium diaphragm, ensuring high intelligibility and consistent dispersion; the system shall provide a frequency range of 60 Hz – 20 kHz (-10 dB) and frequency response of 70 Hz – 18 kHz (±3 dB) with maximum SPL output exceeding 129 dB (LF) and 140 dB (HF), delivering high output capability suitable for medium to large auditoriums.The loudspeaker shall offer nominal coverage of 100° horizontal × 18° vertical, enabling precise audience coverage and array formation, and shall be acoustically optimized for use in arrays of up to 4 enclosures per vertical array, ensuring phase coherence and uniform sound distribution across the listening area ; the system shall have nominal impedance of 8 ohms (LF section) and shall support power handling of minimum 500W AES, 1000W program and 2000W peak (LF), suitable for use with external professional amplifiers; the enclosure shall include 2 × Neutrik NL4 connectors for input and link connections and shall support bi-amp or passive operation through appropriate processing.The cabinet shall be constructed from high-grade 15 mm birch plywood with durable polyurea coating for long-term reliability, and shall include a heavy-duty front grille with acoustic fabric backing for driver protection; the system shall incorporate integrated rigging hardware with adjustable splay angles (0°–6°) allowing flexible vertical array configuration, and shall be supplied complete with compatible flying frame, rigging accessories and mounting hardware for safe installation ; the loudspeaker shall be suitable for fixed installations, auditoriums, theatres and live performance venues, and shall be supplied complete with all necessary accessories, cabling interfaces and manufacturer authorization on company letterhead. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a compact two-way passive coaxial loudspeaker system suitable for short-throw and background sound reinforcement applications, comprising one 5″ coaxial transducer with a minimum 1.5″ LF voice coil and 1″ HF voice coil, capable of delivering a frequency range of 64 Hz – 20 kHz (-10 dB) and frequency response of 90 Hz – 20 kHz (±3 dB), with a sensitivity of 93 dB (1W@1m), nominal impedance of 16 ohms, and power handling of 150 W AES, 300 W program and 600 W peak, producing a maximum SPL in the range of 114 dB to 120 dB, and providing uniform 70° conical dispersion for consistent coverage; the enclosure shall be of bass-reflex design optimized for clear speech and music reproduction with low distortion, and shall be constructed from 9 mm premium birch plywood with durable Polyurea coating for long-term reliability in indoor installations; the system shall be compact, lightweight, and suitable for both fixed and portable applications, with provision for wall/ceiling mounting accessories; connectivity shall be via 2 × Neutrik Speakon NL4MP connectors; the loudspeaker shall be compatible with high-efficiency external Class-D amplification systems with recommended FIR-based DSP presets available through dedicated system processors, ensuring optimal performance, protection, and tonal consistency; the system shall be optimized for discreet architectural integration while maintaining high intelligibility and balanced frequency response, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: :LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a high-performance passive sub-bass loudspeaker system of approved makes suitable for professional auditorium, theatre and live sound reinforcement applications,the system shall comprise one 18” low-frequency transducer with minimum 4” voice coil, incorporating a high-efficiency neodymium magnet assembly and advanced cooling system for reduced power compression and improved thermal stability, ensuring high output and low distortion performance; the subwoofer shall provide a frequency range of 30 Hz – 140 Hz (-10 dB) and frequency response of 35 Hz – 125 Hz (±3 dB) with maximum SPL of not less than 132 dB, delivering deep and powerful low-frequency reinforcement suitable for medium to large auditoriums.The system shall have nominal impedance of 8 ohms, sensitivity of minimum 98 dB (1W/1m), and power handling capacity of 1200 W AES, 2400 W program and 4800 W peak, suitable for use with high-efficiency external Class-D amplifiers; the enclosure shall provide omnidirectional coverage and shall be optimized for both ground-stacked and flown configurations depending on system design; connectivity shall include 2 × Neutrik NL4-MP connectors for input and link operation, ensuring reliable and flexible system integration.The cabinet shall be constructed from high-grade 15 mm premium birch plywood with heavy-duty internal bracing to minimize resonance and distortion, and finished with durable polyurea coating for long-term reliability in professional environments; the enclosure shall incorporate aerodynamically optimized bass-reflex ports to reduce turbulence and port noise, and shall include a robust front grille with acoustic backing for driver protection; the system shall include integrated flying points and rigging provisions for safe suspension as part of a flown subwoofer array or cluster the subwoofer shall be designed for seamless integration with compatible full-range or line array systems, and shall be driven by dedicated system amplifiers with DSP-based processing including crossover, equalization, delay and protection functions to ensure optimal acoustic performance and system reliability; the unit shall be supplied complete with all necessary accessories, mounting hardware and manufacturer authorization on company letterhead. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of Rigging Frame for line array speakers & Subwoofers. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of wall bracket for fill speakers. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a high-performance self-powered stage monitor loudspeaker system of approved makes suitable for professional stage monitoring applications in auditoriums and live performance venues.The system shall be a two-way active coaxial design, comprising one 12” low-frequency transducer with minimum 3” voice coil and one high-frequency compression driver with minimum 3” voice coil and titanium diaphragm, ensuring coherent point-source performance, high intelligibility and uniform coverage across the monitoring area.The loudspeaker shall provide a frequency range of 60 Hz – 20 kHz (-10 dB) and frequency response of 75 Hz – 18 kHz (±3 dB), with maximum SPL of not less than 129 dB continuous and 132 dB peak, delivering high output capability suitable for stage monitoring of speech, vocals and instruments; the system shall provide nominal coverage of approximately 40° horizontal × 60° vertical, optimized for wedge monitoring applications with controlled dispersion and minimal feedback.The system shall incorporate integrated high-efficiency Class-D bi-amplification with total power of minimum 1500 W (LF: 750 W, HF: 750 W), powered by a switching-mode power supply with Power Factor Correction (PFC), ensuring stable operation over wide voltage ranges; the loudspeaker shall include onboard DSP processing with high internal resolution (minimum 56-bit) and FIR linear phase filtering, providing functions such as equalization, crossover, delay, and comprehensive protection including RMS limiting, peak limiting, thermal protection and system monitoring.The unit shall support analog balanced XLR input with loop-through output, and optional Ethernet connectivity for remote control and monitoring through dedicated software platform; the enclosure shall be constructed from premium 15 mm birch plywood with durable polyurea coating, featuring a robust steel front grille with acoustic backing, ergonomic handles, and wedge-shaped design suitable for stage floor placement; the system shall operate on 230V AC, 50/60 Hz and shall include Neutrik powerCON TRUE1 connectors with looping output, ensuring reliable power connectivity.The loudspeaker shall be suitable for use as stage monitors, side fills or portable reinforcement systems, and shall be supplied complete with all required accessories, cabling and manufacturer authorization on company letterhead, ensuring compliance with project specifications and long-term operational reliability. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a professional four-channel high-power Class-D power amplifier of approved makes suitable for driving line array systems, full-range loudspeakers and subwoofers in auditoriums, open-air theatres and large venue sound reinforcement systems; the amplifier shall be based on Class-D topology with high-efficiency switch-mode power supply (SMPS) and Power Factor Correction (PFC), ensuring high efficiency, reduced heat dissipation and stable performance under varying power conditions;the amplifier shall deliver a minimum output power of 4 × 2500 W @ 8 ohms, 4 × 4000 W @ 4 ohms, and shall support bridged mode operation up to 8000 W per channel, providing sufficient headroom for high-performance loudspeaker systems including line arrays and subwoofers; the unit shall have a frequency response of 20 Hz – 20 kHz (±1 dB) and total harmonic distortion of <0.5%, ensuring accurate and low-distortion audio reproduction;the amplifier shall provide a signal-to-noise ratio of ≥110 dB, high damping factor (>1000), and low crosstalk, ensuring precise low-frequency control and overall audio clarity; the unit shall support adjustable gain and input sensitivity compatible with professional DSP processors and mixing consoles;the system shall include balanced XLR inputs and professional speaker outputs via Neutrik Speakon connectors, ensuring secure and reliable connectivity; the amplifier shall incorporate comprehensive protection features including short circuit protection, thermal protection, overload protection, clip limiting, DC protection and soft-start circuitry, ensuring safe and reliable operation in demanding environments;the amplifier shall feature an integrated DSP (if applicable) with functions such as equalization, crossover, delay, limiter and preset management, enabling optimized system performance; the unit shall include a front-panel display (LCD/TFT) with control interface for monitoring and configuration;the amplifier shall be housed in a compact rack-mountable chassis (typically 1U–2U) with intelligent forced-air cooling system, suitable for continuous operation in indoor and outdoor environments; the unit shall operate on a universal power supply (100–240V AC, 50/60 Hz) and shall be suitable for installation in standard equipment racks;the system shall be supplied complete with all necessary accessories, interconnections and manufacturer authorization on company letterhead, ensuring compliance with project specifications and long-term reliability Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional high-power Class-D power amplifier of approved makes , designed for installation and live sound applications, featuring a high-efficiency switching-mode power supply with active Power Factor Correction (PFC) for reduced mains current consumption and stable operation over a wide voltage range of 100–260V AC, 50/60 Hz; the amplifier shall be available in high-power configurations including 2 × 4500 W, 2 × 3000 W, 1 × 9000 W and 1 × 6000 W, delivering a frequency response of 20 Hz – 20 kHz (±1 dB @ 8 ohms), total harmonic distortion of less than 0.5% at 1 kHz, signal-to-noise ratio greater than 110 dBA, crosstalk exceeding 70 dB (20 Hz – 1 kHz), input impedance of 20 kΩ, and adjustable gain between 32 dB and 41 dB, with a high damping factor greater than 5000 ensuring precise loudspeaker control; the unit shall incorporate comprehensive protection mechanisms including short-circuit, overload, auto-limiting, and AC/DC fault protection for reliable continuous operation; the amplifier shall provide high output power with optimized energy efficiency, with power consumption significantly reduced through PFC technology, and shall be housed in a compact 1U, 19″ rack-mount chassis featuring a front-panel 2″ TFT full-vision IPS color display for monitoring and configuration; the system shall be suitable for driving a wide range of high-performance loudspeaker systems and enable flexible system design with minimal amplifier models, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional high-power Class-D multi-channel power amplifier of approved makes, suitable for installation and live sound reinforcement applications, featuring a high-efficiency switching-mode power supply with active Power Factor Correction (PFC) for reduced current consumption and stable operation over a wide voltage range of 100–260V AC, 50/60 Hz; the amplifier shall be available in 2-channel and 4-channel configurations with output ratings up to 4 × 2500 W, 4 × 1500 W, 2 × 5000 W or 2 × 3000 W, delivering a frequency response of 20 Hz – 20 kHz (±1 dB @ 8 ohms), total harmonic distortion of less than 0.5% at 1 kHz, signal-to-noise ratio greater than 110 dBA, crosstalk exceeding 70 dB (20 Hz – 1 kHz), input impedance of 20 kΩ, adjustable gain between 32 dB and 41 dB, and a high damping factor greater than 5000 for precise loudspeaker control; the unit shall incorporate comprehensive protection circuits including short-circuit, overload, auto-limiting, and AC/DC fault protection, ensuring reliable long-term operation; the amplifier shall be capable of delivering high continuous output power with optimized mains consumption (approximately one-third of output power due to PFC efficiency), and shall be housed in a compact 1U, 19″ rack-mount chassis featuring a front-panel 2″ TFT full-vision IPS color display for monitoring and configuration; the system shall be designed for compatibility with high-performance loudspeaker systems, enabling flexible system configurations with minimal amplifier models, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional digital audio mixing console of approved makes designed for live sound reinforcement, auditorium, and installation applications, featuring advanced 96 kHz XCVI FPGA processing delivering ultra-low latency performance (≤0.7 ms) and high-resolution audio quality, with a minimum of 48 input processing channels, 36 buses, 12 stereo mixes plus LR, and 3 stereo matrices, along with 8 internal stereo FX engines with dedicated returns; the console shall provide a minimum of 24 onboard mic/line inputs (XLR) with recallable preamps and phantom power, additional stereo line inputs, and at least 16 balanced XLR outputs along with AES digital output, and shall support flexible routing and patching across all inputs and outputs; the system shall include comprehensive channel processing with 4-band fully parametric EQ, high-pass filters, gate, compressor, delay, and graphic EQ options on mixes, along with automatic microphone mixing capability; the control surface shall incorporate a minimum of 25 motorized faders arranged across multiple layers, a 7-inch capacitive color touchscreen interface, dedicated channel LCD displays, and assignable soft keys for intuitive operation; the console shall support remote control and monitoring via Ethernet using dedicated software and mobile applications, and shall include a built-in 32×32 USB audio interface for multitrack recording and playback along with direct USB recording capability; the system shall be expandable via SLink port for connection to remote stage boxes and shall include a 64×64 I/O expansion slot supporting audio networking protocols such as Dante, Waves, or MADI; the unit shall be housed in a robust chassis suitable for professional touring and fixed installations, and shall be supplied complete with all necessary accessories, software, and manufacturer authorization on company letterhead. Approved Make: Behringer / Yamaha / Allen&Heath

SITC of a professional remote audio expander / stage box of approved makes designed for live sound, auditorium, and installation applications, featuring a minimum of 16 remote-controlled mic/line inputs with high-quality recallable preamps and phantom power, and 8 balanced XLR outputs, operating at 96 kHz sampling rate for high-resolution audio performance with low latency; the unit shall be compatible with digital mixing systems via a single Cat5e/Cat6 connection using a proprietary or standard audio transport protocol (such as SLink), supporting connection to compatible digital mixers and expansion modules with redundant or daisy-chain capability; the stage box shall provide locking XLR connectors, status LEDs for signal and phantom power indication, and robust gain control and preamp recall from the connected console; the enclosure shall be of rugged construction suitable for stage floor or rack mounting, with provision for wall or stage installation, and shall be powered via an external PSU or PoE-compatible system as per manufacturer design; the unit shall support flexible placement on stage, minimizing analog cable runs and improving system noise performance; the system shall be suitable for integration in professional audio networks and shall be supplied complete with required power supply, mounting accessories, and manufacturer authorization on company letterhead.Make: Yamaha/Allen & Heath/Klark Teknik

SITC of a professional digital loudspeaker management system / DSP processor of approved makes featuring 4 analog inputs with additional AES3 digital input and 8 balanced XLR outputs, designed for high-performance sound system processing with support for input levels up to +24 dBu and a dynamic range of minimum 121 dB; the unit shall incorporate high-resolution AD/DA conversion with 32-bit converters and DSP processing with 64-bit double precision at 48 kHz, ensuring superior audio quality, low distortion, and accurate signal handling, with overall system latency not exceeding approximately 1.2 ms; the processor shall include advanced FIR linear phase filtering with up to 1000 taps per output channel, along with independent phase equalization capability and auto-equalization features allowing replication or matching of target response curves, including magnitude and phase adjustments; the system shall provide comprehensive equalization options including high-pass, low-pass, and multiple parametric EQ bands across input and output channels, along with configurable crossover filters (Linkwitz-Riley, Butterworth, Bessel up to 48 dB/oct), delay up to minimum 200 ms, and full matrix routing with simple, basic, and advanced (mixer mode) configurations; dynamics processing shall include dual-stage protection with RMS limiter-compressor (threshold in watts) and peak limiter (threshold in volts) per output channel, ensuring optimal transducer protection and performance; the unit shall support extensive preset management with storage capacity of up to 999 user, snapshot, and system presets, and shall offer control and monitoring via Ethernet and USB through dedicated software platform with features such as grouping, copy/paste, EQ import/export, and integration with measurement systems; the hardware shall be housed in a standard 19″ rack-mount chassis (1U), powered via universal switching power supply (85–240V AC, 40–400 Hz), with front panel IPS color display, encoder, and dedicated control buttons, and shall be suitable for fixed and touring applications, complete with manufacturer authorization on company letterhead and all necessary accessories and documentation. Approved Make:Extron/Lynxpro/BIAMP

SITC of Digital Wireless headset mic ; polar pattern: cardioid;pre-polarized condensor microphone;Audio frequency response: 20Hz-20KHz;Sound pressure level: 150 dB SPL;Sensitivity:1.6 mV/Pa;complete with all accessories as required. Approved Make: Sennheiser/ Shure/ DPA

SITC of set of antenna system set with 2 nos of antennas, antenna splitter, antenna cables . The antenna should be of same OEM as of microphones .System should be complete with all accessorie Approved Make: Sennheiser/ Shure/ DPA

SITC of Dynamic cardioid microphone with on/off switch for speech and vocals,frequency response 45 Hz- 16KHZ or better, nominal impedence 350 ohm or better,feedback rejection, rugged metal housing complete with all accessories Approved Make: Sennheiser/ Shure/ DPA

Supply and installation of drum kit with 7 microphone set Approved Make: Sennheiser/ Shure/ DPA

SITC of Professional installation projector featuring a bright single-chip DLP laser phosphor light engine with a native WUXGA (1,920 × 1,200) resolution and up to approximately 11,000 ANSI lumens brightness for clear, high-impact image projection. The projector supports 16:10 aspect ratio and delivers strong contrast performance with both sequential and dynamic contrast control for vibrant visuals and detail in diverse lighting conditions. A laser phosphor light source provides up to 20,000 hours of service life with low maintenance compared to traditional lamp-based designs, and constant light output (CLO) ensures uniform brightness over time. Connectivity includes multiple digital inputs such as 2× HDMI 2.0, 1× DVI-D, HDBaseT, and 3G-SDI, plus network control over RJ45, facilitating flexible integration with AV systems; support for 4K input signals (scaled to WUXGA) and active stereoscopic 3D capability expands usage across varied content formats. Installation flexibility is enhanced with wide optical lens shift, motorized zoom and focus, and compatibility with a range of interchangeable G-lenses. The projector is built for 360° orientation, supports embedded warp and blend via management tools, and offers low audible noise (~35–39 dB). Typical power input 100–240 V AC, robust casing and network control options make it suitable for conference halls, auditoriums, houses of worship, museums, and immersive environments where reliable, high-quality projection is required. Approved Make: Optoma / Panasonic / Barco

SITC of a heavy-duty motorised projection screen of approved makes designed for large venue applications including auditoriums, theatres, and convention halls, having a diagonal size of 371"(26 feet x 16 feet) in 16:10 aspect ratio, comprising a high-quality matte white projection surface with nominal gain of 1.0 ensuring uniform brightness, wide viewing angles, and accurate colour reproduction suitable for high-lumen laser projectors; the screen fabric shall be seamless or precision-joined with minimal visible joints, flame-retardant and mildew-resistant, and shall provide a smooth, flat viewing surface supported by tab-tensioning or equivalent system to prevent wrinkles and edge curling; the screen shall be housed in a robust heavy-gauge aluminium/steel casing with durable powder-coated finish, designed for ceiling or wall mounting, and shall incorporate a high-torque, low-noise tubular motor with smooth and reliable up/down operation, complete with limit switches for precise positioning; the system shall support multiple control options including wall switch, RF/IR remote, and dry contact/relay interface compatible with AV control systems, with provision for integration into centralized control platforms; the installation shall include all necessary mounting brackets, suspension hardware, power cabling, and control accessories, and shall be executed with proper alignment, leveling, and commissioning to ensure optimal screen flatness and performance; the system shall be suitable for continuous operation in professional environments and shall be supplied complete with manufacturer authorization on company letterhead along with warranty and all required documentation. Approved Make: Da-Lite / Draper / VAV/Telone

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

Supply, Installation, Testing & Commissioning of customised display mount for above displays

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

Supply, Installation, Testing & Commissioning of AI based Full 4K @ 60fps Presenter PTZ Tracking Camera with Dual Camera- one PTZ Camera for Presenter Tracking and second fixed lens Panoramic Camera. PTZ Presenter Camera should support min 30X Zoom and 8x Digital Zoom with Panning range of +170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees, Field of View for PTZ Camera should be min 58 Degree and for Panoramic Camera min. 85 Degree, camera should support simultaneous outputs through HDMI, 3G-SDI, USB 3.0 and IP with 1x Audio In and can be controlled via RS232 and IP. Should support multiple video streams with PIP. Tracking Camera should support Everywhere Tracking, Partition Tracking, Auto Framing & Gesture Control. Should support PoE+ and Virtual USB Driver. Quoted model should be BIS, CE, FCC , Clickshare & RoHS Certified with Test Lab Reports. Approved Make: Lumens/ Sony/ Datavideo

SITC of IP+RS 232/VISCA based Joystick Controller SITC of Joystick with 3" LCD for Preview Monitoring, PAN/Tilt/Zoom Control, Communication via IP & RS232C/RS455 Interfaces, Auto Backlit Keys, Should be able to control minimum 200 Cameras on IP & 10 Cameras through RS232/422, Should support VISCA, VISCA Over IP protocols & PoE. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports. Approved Make: Lumens/ Sony/ Datavideo

SITC of a professional 1G AV over IP encoder of approved makes capable of encoding high-quality video and audio signals for transmission over standard IP networks supporting HDMI 2.0 and VGA input interfaces with maximum input resolution up to 4K UHD (4096 × 2160 @ 60Hz, 4:2:0) and delivering encoded output up to 4K @ 30Hz (4:4:4) with visually lossless compression and ultra-low latency performance suitable for real-time applications; the unit shall transmit AV signals over Cat6/6A/7 cabling via Gigabit Ethernet (RJ45) and support multicast streaming enabling one-to-many and many-to-many distribution across multiple decoders without dedicated matrix hardware; the encoder shall support embedded and de-embedded audio, HDMI audio formats including LPCM and bitstream, and shall be compliant with HDCP 2.2 for secure content transmission; the device shall include control interfaces such as RS-232, IR (in/out), and USB for KVM functionality, enabling remote control of source devices over the IP network; the system shall support Power over Ethernet (PoE IEEE 802.3af) as well as external DC power supply for flexible installation, and shall be compatible with centralized control systems for matrix switching, video wall configuration, and system management via intuitive web-based GUI; the encoder shall be housed in a compact, robust metal enclosure suitable for continuous professional use in auditoriums, command centers, and broadcast environments, with low power consumption (approx. 7–10W) and reliable operation in typical indoor conditions, complete with all required accessories and manufacturer authorization on company letterhead. Approved Make: Crestron/AMX/Lumens

SITC of a professional 1G AV over IP decoder of approved makes capable of decoding high-quality video, audio and control signals over standard IP networks supporting HDMI 2.0 output with maximum resolution up to 4K UHD (4096 × 2160 @ 30Hz, 4:4:4) and 4K@60Hz (4:2:0), delivering visually lossless video with ultra-low latency suitable for real-time applications; the unit shall receive AV streams via Gigabit Ethernet (RJ45) over Cat6/6A/7 cabling and support multicast streaming enabling one-to-many and many-to-many AV distribution without dedicated matrix hardware; the decoder shall include multiple outputs including HDMI and VGA for display connectivity, along with digital (S/PDIF) and analog stereo audio outputs, and shall support HDMI audio formats including LPCM and bitstream; the system shall provide USB over IP functionality with minimum 2 × USB 2.0 and additional USB ports for keyboard, mouse and peripheral connectivity enabling full KVM control of remote computers, along with RS-232, IR (in/out) interfaces for device control and integration with third-party control systems; the decoder shall support HDCP 2.2 compliant content, built-in scaling and frame rate conversion to ensure compatibility with different display resolutions, and shall allow creation of video walls with portrait and landscape orientation; the unit shall support Power over Ethernet (PoE) as well as external power supply, with low power consumption and reliable operation, and shall be configurable via web-based GUI with compatibility for third-party control platforms; the device shall be housed in a compact, robust enclosure suitable for continuous professional use in auditoriums, control rooms and AV installations, and shall be supplied complete with all necessary accessories and manufacturer authorization on company letterhead. Approved Make: Crestron/AMX/Lumens

SITC of a centralized AV over IP system controller of approved makes designed for management and control of distributed AV over IP systems capable of controlling multiple encoders and decoders over standard IP networks enabling flexible matrix switching, video wall creation, and KVM functionality from a single interface; the controller shall support centralized management of AV streams with the ability to route any input source to any display output through an intuitive web-based graphical user interface (GUI) with drag-and-drop functionality, real-time preview, and customizable layouts, supporting group control, macro commands, scheduling, and automation features for seamless operation , the system shall include dual Ethernet ports (dedicated control and AV network), HDMI output for monitoring, USB interface for KVM control, RS-232, IR and trigger ports for integration with external devices and third-party control systems; the controller shall support Power over Ethernet (PoE IEEE 802.3af) as well as external DC power supply with low power consumption (approx. 3W), and shall be capable of operating in conjunction with AV over IP encoders and decoders to enable scalable, low-latency video distribution across multiple zones , the unit shall be housed in a compact, robust metal enclosure suitable for continuous professional operation in auditoriums, control rooms, and enterprise environments, and shall be supplied complete with all required accessories, software, and manufacturer authorization on company letterhead.Approved Make: Crestron/AMX/Lumens

SITC of a professional all-in-one portable video production and streaming system of approved makes comprising a 12-channel HD digital video switcher integrated within a hand-carry portable suitcase unit, supporting video formats 1080p, 1080i and 720p, designed for live production, streaming and recording applications; the system shall provide a minimum of 12 video inputs including 8 × 3G-SDI and 4 × HDMI inputs supporting resolutions up to 1080p50/60, and a minimum of 9 video outputs including 5 × SDI assignable outputs, 1 × HDMI assignable output and 3 × HDMI program outputs, with flexible crosspoint (XPT) assignment; the switcher shall support advanced video processing features including MIX, CUT, WIPE transitions (minimum 32 patterns), DVE effects, minimum 4 upstream keyers (USK) with chroma key capability, minimum 2 downstream keyers (DSK) with key and fill, and multi-window display capability with up to 8 Picture-in-Picture (PiP) layers including flexible source assignment; the system shall include an integrated character generator (CG) interface (such as CG-200 or equivalent) supporting insertion of static and animated graphics/logos (minimum 2 configurable layers), lower thirds, titles and overlays, and shall support advanced transitions including stinger transitions suitable for live events and sports applications; the unit shall incorporate a built-in minimum 17.3-inch Full HD monitor for multiview and preview/program monitoring, along with an integrated H.264 hardware streaming encoder and recorder capable of simultaneous live streaming and recording over IP networks and local storage; the system shall support audio embedding/de-embedding, multi-channel audio mixing, and synchronization with video inputs, and shall provide control via built-in panel, external control interfaces and network-based management; the unit shall be housed in a rugged portable enclosure suitable for field and auditorium use, with reliable power supply, efficient cooling, and continuous operation capability, complete with all required accessories, cabling and manufacturer authorization on company letterhead.Approved Make:Blackmagic Design/Datavideo/AIDA

SITC of Customised Metallic house structure, powder coated with caster wheels & brakes. Drawer for keyboard, mouse and document camera. Wooden Top Tray for placing document & Laptop. All drawers sliding tray and doors should be Lockable. External Connectivity: Cablecubby provision Having 1 X USB A,1 X C-USB,1 HDMI IN,Power Socket with ON/OFF. One MIC XLR for microphone; Motorized tilting adjustment for chainging viewing angle. Minimum 6 Universal rating 5 Amp Socket. Provision to fix Logo space at the front side. Provision of 19"inch Rack inside podium to fit in international standerd equipment. Access doors for servicing both from front and back side of the podium. Wire manager on left & right side and at bottom for flexibility of managing additional wire/wiring. ( FULL HD ) 22”LCD Tablet Monitor with Resolution 1920 x 1080 . View Area 476.64(H) x 268.11(V)mm – 22 inch. Luminance ,White 250 cd/㎡. Colour : 16.7M, Dynamic Contrast Ratio 50,000:1 . Viewing Angle 85˚+85˚H and 80˚+80˚ V. Lamp Life Time 20,000 Hrs (min ). Technology Electromagnetic Resonance. Detectable Height 3~10mm. Position Report Rate 138pps. Pressure Resolution 1024 Level. CapacitiveTouch Technology:Projected Capacitive. Detacted object Fingers, or Conductive material. Tracking speed : 133<-/Capacitive single :100:Multy:95. Accuracy : +-0.5mm /+-3mm (Edge)3mm wide. Detect height 0-10mm. Touch Points 10 Points.Approved Make: UNI/AHA/VACOM

Floor Box:- Supply, Installation, Testing & Commissioning of Floor BOX with Power/LAN/XLR Connectivity Approved Make:Ahuja/VAV/Custom

Floor Box:- Floor Box : 4 x XLR Point Input Stage / Floor Box Approved Make:Ahuja/VAV/Custom

Floor Box:- Floor Box : 2 x XLR Point Input Stage / Floor Box Approved Make:Ahuja/VAV/Custom

SITC of Integrated Controller, Dual Network Interface card, Should support IPv6 ,Should Supports IEEE Standard for Port-based Network Access Control with the ability to grant or deny network access to devices wishing to attach to a LAN based on credentials tied to the device rather than to a user ,Should have High Performance Architecture, Flexible Programming Platform (Java) ,Should have ability to manage secure port TLS and SSH communications with a remote device or server Enhanced Diagnostics On Serial and IR Ports ,Hardware / Software should be Built for 24/7/365 Operation ,Should have Ultra-Fast 1600 MIPS processor , 512 MB Onboard RAM , 1 M Non-Volatile Memory, 8 GB SDHC FLASH Memory ,1 RU Rack Space ,10/100 LAN Interface ,4 Digital I/O Ports , 1 RS-232/422/485 Port , 3 RS-232-Only Ports , 4 IR/Serial Output Ports , 4 Relay Ports ,Regulatory Compliance :RoHS ,WEEE.Approved Makes AMX/EXTRON/CYPRESS

SITC of 10.1”Table Top Touch Panel ;Display Size 10.1” Diagonal;Display Type TFT-LCD, IPS;Resolution:1920x1200;Aspect Ratio:16:10 landscape;Brightness 350 nits (cd/m2);Contrast Ratio >800:1;Illumination: LED backlight;Touch Overlay:Capacitive touch; >5 points touch panel with palm rejection and wet finger operation. Anti-fingerprint; Anti-microbial coating;RAM:4GB, LPDDR4;Storage:16 GB eMMC;RJ-45, POE 802.3af, 15.4W;USB Type C OTG, USB Type 2.0;Camera:5MP front-facing, with Fixed Focusing Lens;Speakers:2 x 2W;POE:RJ-45, POE 802.3af, 15.4W Approved Makes AMX/EXTRON/CYPRESS

SITC of i7 PC with 16GB RAM, 500 GB SSD .For Soft VC and Operation.Approved Make: Dell/HP/Acer

SITC of Wireless Access Point.Should have one 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink™ (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Should have Internal antenna 3.8/4.5dBi (2.4GHz/5GHz).Should have standards IEEE 802.11AX,IEEE 802.11ac,IEE 802.11n standard, 2.4GHz and 5GHz,WMM - Wireless MultiMedia Prioritization,WDS- Wireless Distribution System,Power over Ethernet (PoE) IEEE 802.3af/802.3at.Should have security features like Wi-Fi Protected Access (WPA3),SSL,Wireless access control to identify authorized wireless network devices,MAC address filtering with access control,Basic Service Set Coloring (BSS Coloring),Security Socket Layer (SSL) remote management login.Should have Remote configuration and management feature through Web browser, SNMP or Telnet. setup, monitoring and management through Standalone, Software\ Cloud based controller and Mobile App. Manageability As standalone and If software\ Cloud based controller than 5 years cloud licence should be including without extra charges. Should have advance wireless features like OFDM/OFDMA, Wireless backhaul to form Mesh Network,Bridge mode: Point-to-multipoint wireless WDS mode, Adjustable Transmit Power Control (TPC) Device detection.PoE power consumption should not be more than 25.5W Watts.Bandsteering, Guest Network/Captive Portal, Bandwidth management, Link Layer Discovery Protocol.Target Wake Time (TWT) feature.Block SSID Broadcast feature.can be Ceiling mounting/ Wall mounting.Should be from the same OEM as Ethernet switch.No repair products & replacement with New box.Lifetime free latest firmware support. Approved Make: Dlink/ Netgear/ Cisco

SITC of a fully managed AV over IP network switch of approved makes specifically designed for professional audio-visual applications comprising 24 × 10/100/1000 Mbps RJ45 PoE+ ports (IEEE 802.3at) with minimum 30W per port and a total PoE power budget of 300W, along with 2 × additional Gigabit RJ45 uplink ports and 4 × SFP fiber uplink ports for flexible connectivity; the switch shall support Layer 2 and Layer 3 switching features including VLAN, QoS, Link Aggregation (LAG), IGMP snooping/multicast management, DHCP server, IPv4/IPv6 support, and advanced security features such as DHCP snooping, RADIUS authentication and storm control; the unit shall be optimized for AV over IP applications with built-in IGMP Plus™ for automatic multicast configuration, pre-configured AV profiles for common protocols such as Dante, AES67, NDI, NVX, AMX, Q-SYS and similar systems, and shall provide a dedicated AV-friendly graphical user interface (GUI) in addition to standard IT management interfaces (Web GUI, CLI, SNMP, SSH); the switch shall support high performance with switching capacity of minimum 60 Gbps and forwarding rate of approximately 44.64 Mpps, along with jumbo frame support up to 12 KB and MAC address table size of minimum 16K entries; the device shall include USB ports for management, console interfaces, internal power supply, and support Power over Ethernet distribution for AV endpoints such as encoders and decoders; the unit shall be housed in a 1U rack-mountable chassis with rear-facing ports for clean AV rack integration, low-noise cooling (~34 dB) suitable for control room environments, and shall operate on standard AC power with maximum consumption around 400W under full load; the switch shall be supplied complete with rack mounting accessories, cables, and manufacturer authorization on company letterhead, and shall be suitable for continuous operation in professional AV installations such as auditoriums, command centers and broadcast environments. Approved Make: Dlink/ Netgear/ Cisco

Supply, Installation, Testing & Commissioning of Cables & connectors(Speakers,Audio,Cat x, hdmi etc) for connecting the entire AV equipment of Auditorium, Conference Room & Lobby Make: Falcon/Stecker/Dlink/Digisol/MX/Linetech

SITC of camera wall mount metal stand. It should be constructed with durable material and can be attached right side up or upside down, depending on camera configuration and requirment. OEM accessory will give a perfect fit and features pre-drilled installation hardware and cable holes. Make: Custom

SITC of 42U Floor standing rack with caster wheels. It should have cable entry from top and bottom.Should have front glass door with lock.Should have threeshelf tray.(1U/255mmD),PDU6x5Amp,Fan 90CFM,Mounting hardware(Packet of 10). Make: Prinet/Dynamic/APW president

SITC of professional monitoring headphones with linear sound reproduction, folding and rotating earcupes, frequecy response 10 Hz - 22 KHz or better,max SPL 112 dB or more complete with all accessories Make:Sennheiser/ Shure/ DPA

SITC of tall adjustable microphone stands with tripod base complete with all accessories as required. Make: Ahuja / hercules / i&A stands

SITC of Short stands complete with all accessories as required.Make: Ahuja / hercules / i&A stands

SITC of Active DI Boxes for electronic instruments Powered by +48 V phantom power with a 9 V battery backup Signal levels ranging from +10 to +50 dBu Frequency response from 10 Hz to 90 kHz (±3 dB) Earth Lift Switch.Make: BSS/Behringer/Klark Teknik

SITC of LED PAR light comprising RGBW LED source, beam angle 15°–30°, suitable for side lighting and effect lighting applications, with smooth dimming, DMX512 control, die-cast aluminium housing, and flicker-free operation.Make: ASL/Equivalent

SITC of professional LED Cyc light / asymmetric wall washer designed for uniform illumination of cyclorama, comprising RGBW or RGBA LED source (minimum 150W), wide asymmetric beam distribution for even top/bottom coverage, high color mixing capability, smooth dimming (0–100%), flicke.Make: ASL/Equivalent

SITC of professional moving head light comprising minimum 250W–300W LED source, with motorized pan/tilt, zoom function, color wheel, rotating gobos, prism effects, smooth dimming (0–100%), strobe effects, DMX512 control, multiple operational modes, LCD display, and flicker-free operation suitable for auditorium stage lighting and event applications. Make: ASL/Equivalent

SITC of professional digital lighting control console supporting minimum 512 DMX channels (expandable), control of intelligent fixtures, scene-based programming, minimum 200 scene memory, playback faders, chase functions, dimmer and RGB/RGBW control, intuitive user interface, USB/Ethernet connectivity, backup capability, and standalone operation.Make: Pearl/Equivalent

SITC of DMX splitter with minimum 1 input and 4–8 optically isolated outputs, ensuring signal integrity and protection for lighting network, complete with connectors and termination support.

SITC of dedicated 3-phase lighting distribution panel, fabricated from MS sheet, powder coated, comprising MCCB/MCB protection, phase balancing, individual outgoing circuits for lighting fixtures, RYB indication, voltmeter/ammeter, earthing provision, and suitable for stage lighting load distribution.

SITC of Cable Tray of size 40x75x40mm with 1.6 mm thickness

SITC of Light socket box 4"x4" with 15 Amp multi socket

SITC of C Clamp

SITC of safety chain

SITC of lighting bars fabricated from MS pipe (minimum 40 NB), powder coated black, complete with suspension system, clamps and supports, suitable for mounting lighting fixtures at FOH and stage positions, with adequate load-bearing capacity.

SITC of DMX signal cable (shielded twisted pair) with connectors, termination, testing and commissioning for complete lighting system.

SITC of power cabling for lighting fixtures including connectors, distribution boxes and termination.

SITC of XLR connectors as required

SITC of motorized main stage curtain made of high-quality fire-retardant velvet fabric (minimum 350 GSM) conforming to NFPA 701 / BS 5867 standards, in approved colour, with horizontal traveler arrangement; complete with heavy-duty straight drapery track of open frame design, fabricated from powder-coated steel, supported on suitable brackets; curtain runners with nylon wheels and oil-impregnated bearings for smooth operation; master carriers with steel cable arrangement (minimum 3 mm dia), end stops, pulleys, and track accessories including joining plates, overlap carriers and guides; complete with motorized drive system (minimum 1.5 HP, 3-phase or suitable single phase as per design) with reduction gearbox, limit switches for open/close positions, and control through wall-mounted push button station (open/close/stop) and control panel; curtain shall be double pleated with minimum 900 mm center overlap; complete in all respects including installation, testing and commissioning as per site requirements.Width-44m(approx),Height-8m(Approx)

SITC of main valance made of same fire-retardant fabric as main curtain, stitched in 1:2 pleating, complete with cotton dori, eyelets and mounting arrangement using suitable MS pipe (minimum 25 mm dia) painted black; fixed above proscenium opening to conceal curtain track and lighting fixtures, complete with all accessories and installation as per drawings.Width : approx 22 to 24 m ; height :1.2 m to 1.5 m

SITC of stage border curtains made of fire-retardant black crepe fabric (minimum 280–300 GSM), stitched in 1:2 pleating, complete with mounting arrangement using MS pipes (minimum 25 mm dia) painted black, suitable for installation above stage at multiple levels for masking of lighting fixtures and rigging; complete with all accessories and installation.

SITC of Stage Legs (Side Wing Curtains) made of fire-retardant black velour/crepe fabric (minimum 300 GSM) complying with NFPA 701 / BS 5867, stitched with 1:1.5–1:2 fullness, complete with reinforced header, eyelets, bottom pipe pocket, heavy-duty manual track system with runners, carriers, MS support pipe, clamps, brackets and all accessories; installed in multiple rows on both sides of stage with proper overlap and alignment; complete installation, testing and commissioning as per approved drawings and site conditions.Height: 8.0 m (± site condition);Width per leg: 2.5 m to 3.0 m;Overlap: Minimum 150–300 mm between adjacent legs

SITC of rear blackout curtain made of fire-retardant black fabric (minimum 300 GSM) with horizontal sliding arrangement, complete with heavy-duty drapery track, runners, master carriers, steel cable system, pulleys and accessories similar to main curtain; complete with motorized operation (minimum 1.5 HP motor) with limit switches and control panel; curtain to be double pleated with minimum 900 mm overlap; complete installation, testing and commissioning as per site conditions.

SITC of side ladders (lighting booms) fabricated from MS rectangular tubes (minimum 50 × 25 mm, 16G) welded construction, finished with black powder coating, complete with mounting clamps, base plates and provisions for fixing stage lighting fixtures at multiple heights; complete installation as per stage design.

SITC of stage valance support bar fabricated from MS pipe (minimum 40 NB / 48 OD) in dual barrel configuration, painted black, suitable for supporting front valance and masking curtains, complete with suspension system, clamps and accessories; installed as per approved drawings.

SITC of cyclorama system comprising supply and installation of seamless white cyclorama fabric (matte finish, fire-retardant, minimum 300 GSM) suitable for projection and stage lighting applications, stretched over a rigid MS frame fabricated from MS pipes (minimum 40 mm dia) and MS angles (minimum 35 × 35 × 5 mm), properly anchored to wall/floor with holdfasts; frame to be painted with red oxide primer and black finish paint; fabric to be fixed with uniform tension using suitable fastening system (velcro/dori/track as required); complete installation ensuring wrinkle-free surface for uniform projection and lighting effects.Width- approx 26 m, Height- apporox 6 m

SITC of motor control panel for stage curtain system, fabricated from MS sheet with powder-coated finish, comprising contactors, overload protection, MCB/MCCB, limit switch integration, push button stations (open/close/stop), emergency stop, phase indication (RYB), power indication, internal wiring and terminal blocks; suitable for safe operation of curtain motors and integrated with stage electrical system; complete installation, testing and commissioning.

Supplying, and placing in position of sofa of Durian Make - Berry/55001 as per Image .classic Contemporary design and slender curves. . The Sofa of stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa. Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Leatherette, the sofa makes a fantastic first impression. The Cushioning is moulded such that it flows along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa The seat cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyester poly fill outer layer of 200 gsm. The polyester poly fill keeps the upholstery wrinkle free & soft. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, GREEN PRO / GREEN GUARD Certification, AIOTA Certification, BIFMA Certification, GRIHA Certification and from the approved make of Durian, Godrej, HNI, Rockworth, Haworth, Featherlite, Fabteq, Geeken. The product should be as per above given specification under the guidance of project architect & Engineer in charge. 1 seaterDimension (W)1905mm X (D)890mm X (H)870mm

Supplying, and placing in position of main Table as per Image/ drawing of Fabteq make - FS-711 (Model No.).The Table top made out of 32mm thk prelam particle board with 2mm thk pvc edge banding & side panel & modesty panel made up of 25mm thick pre-laminated particle board .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & central Locking arrangement. The table have a provision of free standing Side Storage of size 1200mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having a provision of 3 drawer unit, one openable shutter with D shape handle & central locking arrangement, one open storage with shelf in it . The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, GREEN PRO / GREEN GUARD Certification, AIOTA Certification, BIFMA Certification, GRIHA Certification and from the approved make of Durian, Godrej, HNI, Rockworth, Haworth, Featherlite, Fabteq, Geeken. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Providing and fixing 9 " long and 20mm thick and 50 mm depth grouted on the wall MS powder coated lettering for front gate with following lettering " Ustad Bismillah Khan Sangeet Mahavidyalay, Dumraon, Buxar ."

Amount of EMD (In Rs-):-92,65,500/-

Time of Completion:-17 Months

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

a) All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

All kinds of soil.

Supplying chemical emulsion in sealed containers including delivery as specified.

Chlorpyriphos/Lindone emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termites' treatrnent(including the cost of chemical emulsion)

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor.

With Chlorpyriphos EC 20% with 1% concentration

Extra for every additional lift of 1.5 m or part thereof in :

Ali kinds of soil.

Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead.

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

1:3:6 (1 Cement; 3 coarse sand :6 graded stone aggregate 40 mm nominal size)

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments,pillars,post.struts,buttresses, string or lacing courses,parapets, coping,bed blocks, anchor blocks, plin window sills, fillets etc. upt floor five level excluding the cost of centring,shuttering and finishing:

1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4(1cement:2:2 coarse sand :4 graded stone aggregate 20mm nominal size)

Extra for providing and mixing water prooding material in cement concrete work in the proportion recommended by the manufacturers.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg. per square metre on damp oroof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Extra for concrete work in superstructure above floor V level for each four floors of part thereof.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

All works upto Plinth level

Concrete of M-30 grade with minimum cement content of 350 kg/cum

All works above plinth level upto floor V level

Concrete of M-30 grade with minimum cement content of 350 kg/cum

Extra for RCC work in superstructure above floor V level for each four floors or part thereof.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia.

Thermo-Mechanically Treated bars TMTC-500-12mm dia.

Thermo-Mechanically Treated bars TMT Fe-500-I6mrn dia.

Thermo-Mechanically Treated bars TMT Fe-500-20mm dia.

Thermo-Mechanically Treated bars TMT Fe-500-25rnm dia

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundation, footing, bases of columns etc. for mass concrete

Suspended floors, roofs, landings, balconies, and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Stairs, (excluding landings) except spiral-staircases.

Weather shades. Chajjas, corbels etc., including edges

Columns, Pillars, Piers, Abutments, Posts and Struts

Shelves

Edges of slabs and breaks in floors and walls

Under 20cm wide

Small lintels not exceeding 1.5 m clear span, mouldings as in cornoces, window sills, string, courses, bands, copings, bed plates, anchor blocks and the like.

Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).

Suspended floors, roofs, landings, beams and balconies (Plan area to be measured)

Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.

200 mm wide.

Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge .(Material shall confirm to ASTM 6063).

Floor Joint of 100 mm gap.

Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-InCharge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).

Wall Joint of 100 mm gap.

Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self-centering arrangement that freely rotates / moves in all directions.The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.

Roof Joint of 100 mm gap.

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :

a) Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with bricks of class designation100A in foundations and plinth in :

Cement mortar 1:4 (1 cement: 4 coarse send)

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in Extra for Brick work in superstructure above plinth level upto floor V

Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level.

Cement mortar 1:4 (1 cement: 4 coarse send)

Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks)

Extra for brick work in superstructure above floor V level for each four floors or part there of.

Extra for half brick masonry in superstructure. Above floor V level for every four floors or part there o

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, edge moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab upto 0.50 sqm

Area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing 75 mm high, 50 mm deep and 18 mm thick stone slab table rubbed, edges rounded and polished, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Granite Stone of approved shade

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality

1.0 mm thick

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to measured)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to steel windows by welding

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/cum. The frame will have a provision of G.I. anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge . (Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes fire rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/sqm) duly filled mineral wool insulation having density minimum 96 kg/cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for seperately).

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Providing and fixing Stainless steel satin finish SS 304 grade Tower Bolts SS screws for wooden doors of approved make and model all complete as per the directions of Engineer-in-charge

Providing and fixing Stainless steel satin finish SS 304 grade Handles with SS screws for wooden doors of approved make and model all complete as per the directions of Engineer-in-charge

Providing and fixing carbon steel galvanised ( minimum coating 5 micron ) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve,including drilling of hole in frame , concrete/ masonry, etc.as per direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position andapplying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works.

Structural steel work riveted or bolted in built up sections, trusess and framed work, including cutting,hoisting,fixing in position and applying a priming coat of approved ateef primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Hot finished seamless type tubes

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Extra for providing mechanical device chain and crank operation for operating rolling shutters.

Exceeding 10.00 sqm and upto 16.80 sqm in the area

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Using M.S. angels 40x40x6 mm for diagonal braces

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab.

Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length

Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with:

Udaipur green marble

Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

Size of Tile 600 x 600 mm.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

Size of Tile 600 x 600 mm.

Mirror polishing on marble work/stone work where ever required to give high gloss finish complete.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement3

18 mm thick

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand) :

25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

52 mm thick cement concrete flooring with metallic concrete hardener topping under layer 40 mm thick cement concrete 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick metallic concrete hardener consisting of mix 1:2 (1 cement hardener mix:2 stone aggregate 6 mm nominal size) by volume @ 2 liter per 50 kg of cement or as per manufacture specification. This includes cost of cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3(1 cement::3 coarse sand)as per standard design

In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-(Part I) :2011 (Board with BIS certification marks)

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60)

12 mm cement plaster of mix :

1:6 (1 cement : 6 coarse sand)

6 mm cement plaster of mix:

1:3 (1 cement : 3 fine sand)

18 mm cement plaster in two coat under layer 12 mm thick cement plaster 1:5 (1 cement: 5 course sand) and a top layer 6mm thick cement plaster 1:3(1 cement: 3 coarse sand finiished rough with sponge

Extra for plastering exterior walls of height more than 10m form ground level for every additional height of 3 m or part there of

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade .

New work (two or more coats ) over and including priming coat with cement primer

Distempering with dry distemper of approved brand and manufacture (two or more coats ) and of required shade on new work , over and including priming coat of whiting to give an even shade

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

White washing with whiting to give an even shade :

New work (three or more goats)

Neat cement punning

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5.50 mm thickness

With float glass panes of 8.0 mm thickness

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

Upto 5mm depth and 5mm width

Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.

Powder coated minimum thickness 50 micron aluminium

Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer in-charge

Powder coated minimum thickness 50 micron aluminium

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.

Powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions.(ii) 11 nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) Illrd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) Ivth course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni).

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and laying integral cement based treatment for water . proofing on horizontal surfaces at all levels as directed by Engineerin-charge and consisting of: 1) 1st layer of 20 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement:3 coarse sand) mixed with water proofing compund conforming to IS: 12645 in the recommnded proportion. Joints sealed and grouted with cement slurry mixed with water proofing compound conforming to IS: 12645 in proportions recommended by the manufacturer. II) 2nd'c!ass layer of 25 mm thick cement mortar 1:3 (1 cement:3 coarse sand) mixed with water proofing compound in recommended proportions. Ill) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreadidng @ 8 cudm/sqm thoroughly embedded in the 2nd layer.

Using rough kota sotne.

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing sspecified stone slab 20 mm thick with cemm slurry mixed with water proofing compound conforming to IS: 2645 in recommended proportion with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar1:4 (1 cement:4 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-incharge.

Using rough kota stone.

Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).

600 mm dia piles

450mm dia. piles

Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :

300 mm dia piles

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.

Single pile upto 50 tonne capacity

Initial test

Routine test

Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.

Add for using extra cement in the items of design mix over and above the specified cement content there in.

Providing and supplying aluminium extruded tubular and other aluminium sections as per the rchitectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS74,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge.

Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete.

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- inCharge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.

50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.

40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign mater;al etc. and lining out complete.

New work (Two or more coats)

Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.

With rapid setting bitumen emulsion

On W.B.M / W.M.M. @ 0.4kg/sqm

On bituminous surface @ 0.25kg/sqm

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge.

Made of G.I. wire of dia 4 mm

Stone chips

Coarse/Fine Sand

Bricks

Local Sand

Cement

Coarse Sand

Local Sand

Stone Chips

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing toilet paper holder :

C.P. brass

Providing and fixing 32mm C.P brass bottle Trap of approved quality & make as per the direction of engineer-in-incharge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink without drain board

610x460 mm bowl depth 200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

40 mm dia

Providing and fixing soil, waste and vent pipes :

100 mm dia

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

75 mm dia

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Hubless centrifugally cast (spun) iron epoxy coated inside & outside I.S. 15905

Providing and fixing plain bend of required degree.

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Providing and fixing heel rest sanitary bend

100 mm dia

Sand cast iron S&S as per IS - 3989

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

sand cast Iron S&S as per IS: 3989

Providing and fixing single equal plain junction of required degree

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Providing and fixing single equal plain junction of required degree

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Providing and fixing terminal guard:

Hubless centrifugally cast (spun) iron pipe epoxy inside & outside IS: 15905

Sand cast iron S&S as per IS - 3989

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipes

S S 304 grade coupling with EPDM rubber gasket

S S 304 grade coupling with EPDM rubber gasket

Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter :

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :

100 mm diameter pipe

75 mm diameter pipe

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :

100 mm diameter pipe

75 mm diameter pipe

Providing and fixing G.I. soil / waste pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler

Single tee with door

Shoe (Plain)

110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

20 mm dia. nominal bore

25 mm dia. nominal bore

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

15mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

65 mm diameter

80 mm diameter

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :

25 mm dia

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :

50 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

25 mm nominal outer dia pipe

40 mm nominal outer dia pipe

50 mm nominal outer dia pipe

65 mm nominal outer dia pipe

80 mm nominal outer dia pipe

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :

150 mm diameter

200 mm diameter

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not lessthan 4.50 kg and frame to be not less than 2.70 kg as per standard design :

180x150 mm size P type

With fly ash bricks (non modular) bricks of class designation 7.5

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

250 mm dia. R.C.C. pipe

300 mm dia. R.C.C. pipe

450 mm dia. R.C.C. pipe

Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) with RCC top slab with 1:2:4 mix ( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size ) , foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size ) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation cocreate 1:3:6 mix (1 cement :3 coarse sand : 6 graded stone aggregate 40 mm norminal size),and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm norminal size) finished with a floating coat of neat cement complete as per standard design .

inside size 90x80 cms and 45 cms deep including CI cover with frame ( light duty ) 455x610 mm internal dimensions total weight of cover & frame to be not less than 38 kg (weight of cover 23 kg & weight of frame 15 kg )

with common brunt clay FPS ( non modular ) bricks of class designation 7.5

Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand),in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation cocreate 1:3:6 mix (1 cement :3 coarse sand : 6 graded staone aggregate 40 mm norminal size),and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm norminal size) finished with a floating coat of neat cement all complete as per standard design:

Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand),in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation cocreate 1:3:6 mix (1 cement :3 coarse sand : 6 graded staone aggregate 40 mm norminal size),and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm norminal size) finished with a floating coat of neat cement all complete as per standard design:

With Common Burnt clay FPS ( non modular ) bricks of class designation 7.5

Extra depth for Circular Type manhole 0.91 m internal dia ( at bottom ) beyond 0.91 m to 1.67 m

With common burnt clay FPS ( non modular ) bricks of class designation 7.5

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering esides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per pecifications and having manufacture’s permanent identification mark to be visible even after fixing,including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different trata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

All Type of Soil

400mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.

200 mm nominal size dia having minimum wall thickness 5.40 mm

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.

200 mm nominal size dia

Supplying , filling , Spreading & Leveling stone boulders of size range 5 cm to 20 cm , in recharge pit , in the required thickness , for all lead and lifts , all complete as per direction of Engineer-in-charge.

Supplying , filling , Spreading & Leveling gravels of size range 5 mm to 10 mm , in recharge pit , over the existing layer of boulders , in required thickness , for all lead and lifts , all complete as per direction of Engineer-in-charge.

Supplying , filling , Spreading & Leveling coarse sand of size range 1.5 mm to 2 mm , in recharge pit , in required thickness , over gravel layers , for all lead and lifts , all complete as per direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:

200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

200 mm clamp

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

200 mm nominal size dia

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering esides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per pecifications and having manufacture’s permanent identification mark to be visible even after fixing,including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge.

Providing and filling Brick Blasted filling including proper watering and compaction in sunken areas all complete as per drawings and as directed by the Engineer-in-chargein-Charge.

Marble stone flooring with 18 mm thick in risers of steps, skirting and Cladding laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.

Granite stone slab 18 mm thick in risers of steps, skirting and Cladding laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required .

150 mm dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

Single headed Gunmetal

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :

Single headed Gunmetal

Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers , gaskets conforming to IS : 13095 of following sizes as required .

150 mm dia

Supplying and Fixing 63 mm dia 15 m Long RRL Hose pipe with 63 mm dia male and female coupling duly bound with GI wire , rivet etc . Conforming to IS : 636 ( Type A ) as Required .

Gun Metal

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Gun metal

Supplying and Fixing of Fire brigade connection of Cast iron body with gunmetal male intantaneous inlet coupling complete with cap and chain as required for suitable dia ms pipe connection conforming to IS : 904 as required

2 Way 100 mm dia MS Pipe

4 Way 150 mm dia MS Pipe

Supplying and Fixing Air Vessel made of 250 mm dia 8 mm thick ms sheet 1200 mm in height with air release valve on top and flanged connection to riser drain arrangement with 25 mm dia gunmetal wheel valve with required accessories pressure gauge and painting with synthetic enamel paint of approved shade as required

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of foilwing sizes as required:

150mm dia

Supplying, installation, testing and commissioning of electric driven Terrace Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : ( Terrace Fire Pump ).

900 lpm at 35 m Head

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required .

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia (wall thickness 6.3 mm)

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI] marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :

80 mm Dia

100 mm Dia

150 mm Dia

200 mm Dia

Supplying and Fixing orifice plate made out of 6 mm thick stainless steel ( Grade 304 ) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg / sqcm complete as required .

Providing Installation Testing and Commissioning of Non Return Valve of following sizes conforming to IS : 5312 complete with rubber gasket , GI Bolts , Nuts , washers etc as required .

100 mm dia

150 mm dia

Providing Installation Testing and Commissioning of stainless steel y-strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3mm dia holes with stainless steel flange.

150mm dia

200 mm dia

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.

40 Metre Length

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

Pendent Sprinkler

Horizontal side wall sprinkler

Providing and fixing of Flow switches in MS pipe line including connection extra as required.

150mm dia

Supplying, installation, testing & commissioning of sprinkler flexiblepipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :

2280 LPM at 70 m Head

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)

2280 LPM at 70 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump).

180 LPM at 70 m Head

Supplying, installation, testing and commissioning of electric driven Terrace Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : ( Terrace Fire Pump ).

900 lpm at 35 m Head

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 120 sq. mm and upto 400 sq. mm.

supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

P/ F RCC Hume Pipe

150 mm dia ID

FIRE FIGHTING PANEL

S/ F powder coated of approved shade MS Cable Trays

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

S/ F powder coated of approved shade MS Cable Tray Bends

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

S/ F powder coated of approved shade MS Cable Tray Tee's

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

S/ F powder coated of approved shade MS Cable Tray Cross Members

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

450 mm width X 62.5 mm depth X 2.0 mm thickness

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 6 sq. mm (28mm)

4 X 10 sq. mm (28mm)

4 X 16 sq. mm (28mm)

3½ X 25 sq. mm (28mm)

3½ X 35 sq. mm (32mm)

3½ X 50 sq. mm (35mm)

3½ X 70 sq. mm (38mm)

3½ X 95 sq. mm (45mm)

3½ X 120 sq. mm (45mm)

3½ X 150 sq. mm (50mm)

3½ X 185 sq. mm (57mm)

3½ X 240 sq. mm (62mm)

3½ X 300 sq. mm (70mm)

10 Loop Panel

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED,metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W wall mount speaker ceiling/wall speakers complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

OUTDOOR UNIT

10 HP to 12 HP

4 HP to 22 HP

INDOOR UNIT

Supplying, Installation, Testing and Commissioning of following minimum capacity High wall type Indoor unit equipped with and comfort washable synthetic media prefilter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor)

Supplying, Installation, Testing and Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted mid high static ductable type Indoor unit equipped with washable synthetic media prefilter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration Isolators, drain pan, drain pump, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor) High Static Ductable units (minimum 49 to 77 pascal external static pressure)

Supplying, Installation, Testing and Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted high ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration Isolators, drain pan, drain pump, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor)

High Static Ductable units (minimum 78 pascal external static pressure)

Supplying, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units in confirmation to IS 18794 : 2024 made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for varialbe frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.)and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. (Total static pressure considered is max. 50 mm wg).

Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature).

1.0 TR with 5 Star BEE Rating

Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm

19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm

25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm

31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm

34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm

Thickness 0.63 mm sheet (24 gauge) Galvanized Sheet Steel Ducting

Thickness 0.80 mm sheet (22 gauge) Galvanized Sheet Steel Ducting

Thickness 1.00 mm sheet (20 gauge) Galvanized Sheet Steel Ducting

Thickness 1.25 mm sheet (18 gauge) Galvanized Sheet Steel Ducting

Thickness 0.63 mm sheet (24 gauge) Galvanized Sheet Steel Ducting

Thickness 0.80 mm sheet (22 gauge) Galvanized Sheet Steel Ducting

Thickness 1.00 mm sheet (20 gauge) Galvanized Sheet Steel Ducting

Thickness 1.25 mm sheet (18 gauge) Galvanized Sheet Steel Ducting

GI volume control duct damper

Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sqmm) for integration within AHU room

Actuator

Powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers

Powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers

Supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Thermal insulated flexible duct- 200 mm dia

Fire dampers in supply air duct/main branch and return air path with inbuilt mechanism of spring return action Fire damper

Actuator

19mmthickness

25mmthickness

Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable size Gl box etc.as required. (Switch Control Primary Points)

Group C

Wiring for light/ power plug with 2 X 4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recesed PVC conduit along with 1 No. 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 x 10 sq. mm + 1 x 10 sq.mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mmX75mm)

6 Module (200mm X 75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

3 pin , 5/6 amps socket outlet

5/6 amps switch

Telephone socket outlet

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required.

Supplying and fixing replaceable compact commercial batten suitable for Single TB LED tube complete with 20 watt LED polycarbonate TB tube with built in driver etc. directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required.

Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 Im/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 Im/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required

Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required.

lnstallation, testing and commissioning of ceiling fan,including wiring the down rods of standard lengjth ( upto 30 cm ) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

300 mm Sweep

Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB Isolator)

8 way, Double door

Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/lsolator)

6 way (4 + 18), Double door

8 way (4 + 24), Double door

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

6/32 amps, Single pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 amps, single pole

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 amps, Triple pole

Supplying and fixing following rating, double pole, (singte phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.l. tube, having single prong at top, with 85 mm dia 6 mm thick G.l' base plate including holes etc. complete as required.

Jointing copper/ G.l. tape (with another copper/ GI tape, base of the finial or any other metallic object ) by riverting/nut bolting sweating and soldering etc. as required.

Providing and fixing G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run)

Providing and fixing G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.l. strip, 125 mm long, with 4 nos. of tlnned G.l. bolts, nuts, chuk nuts and spring washers etc. complete as required.

Providing and laying G.l. tape 32 mm X 6 mm from earth electrode directly in ground as required.

Laying of one number PVC insulated and pVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Up to 35 sq mm.

Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering.

Above 95 sq.mm and upto 185 sq.mm

Above 185 sq.mm and upto 400 sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Up to 35 sq mm. (Clambed with 1mm thick saddle)

Above 35 sq mm and up to 95 sq mm. (Clambed with 25 x 3 mm thick MS Flat Clamp)

Above 95 sq. mm and upto 185 sq. mm (Clamped with 25/40x3mm MS flat clamp)

4 core, 6 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty ) armoured electric cable with aluminium conduct

4 core, 10 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conduct

4 core, 16 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 25 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 35 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 50 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 70 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 95 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 120 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 150 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 185 sq. mm XLpe/pVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 240 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor

3.5 core, 300 sq. mm XLPE/PVC insulated PVC sheathed(Heavy duty) armoured electric cable with aluminium conductor

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including accesssories, and providing masonary enclosure with cover plate (CI heavy duty) having locking arrangement and watering pipe of 2.7 mtr long etc. with charcoal or coke and salt ) as required.

Supplying and laying 25 mm X 5 mm G.l. strip in 40 mm dia G.l. pipe from earth electrode, including connection with G.l. nut, bolt, spring, washer excavation and refilling etc. as required.

Supplying and laying 25 mm X 5 mm copper strip in 40 mm dia G.l. pipe from earth electrode, including connection with brass nut, bolt. spring, washer excavation and refilling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing etc. as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Above 4.5 metre and upto 6.5 metre

Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

Supply and erection of 6 metre height Hot-dip galvanized octagonal street Iight pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm ,small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation)

Single arm, 1000 mm

Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. (1 run of cable).

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Amount of EMD (In Rs-):-92,65,500/-

Time of Completion:-17 Months

Description of Item

ACOUSTICAL DOOR (HIGH PERFORMANCE – DOUBLE SKIN COMPOSITE TYPE) : Providing and fixing in position factory-fabricated acoustical door assembly comprising of solid wood frame of finished size 150 x 80 mm (±2 mm tolerance), kiln-seasoned and chemically treated, fixed with approved anchor fasteners. Door shutter shall be minimum 75 mm thick, constructed with internal hardwood grid framework (Solid wood) at maximum 600 x 600 mm c/c, infilled with 50 mm thick polyester fibre insulation of minimum 1000 GSM and density not less than 24 kg/m³, combined with high-density sound barrier membrane of minimum 3 mm thickness (min. 4 kg/m² mass loaded vinyl or equivalent) provided continuously on both faces. Both faces of shutter shall be finished with 12 mm calibrated BWR grade plywood and 1.0 mm thick high-pressure laminate, factory pressed under controlled conditions to ensure uniform bonding. All edges shall be lipped with hardwood of minimum 8 mm thickness, machine finished. Shutter shall be provided with perimeter acoustic sealing system including EPDM/neoprene gaskets, and drop-down acoustic seal at bottom to ensure airtight performance. Doors without complete sealing system shall be rejected. The complete door assembly shall achieve minimum STC 35–40. Hardware shall include minimum 4 nos. SS heavy-duty hinges (150 mm), mortise lock, SS handle, door closer, and all necessary accessories, suitable for acoustic application.

Frame shall be finished with polish/paint as per approved scheme, and shutter with approved laminate finish including decorative mouldings / trims as per architectural drawings. Rate shall include all required cut-outs, hardware fixing, sealing system, edge finishing, accessories, wastage, and complete installation as per direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Shining Sun / Viraaj Extrutech / Absolute Solutions / Audible.

STAGE WOODEN FLOORING : Providing and fixing in position teak wood stage flooring system comprising of machine-cut tongue & groove teak wood planks of size 20 mm (±0.5 mm) thickness, 70 mm (±1 mm) width and random lengths between 750 - 1200 mm, kiln-seasoned to moisture content 8–12%, with uniform grain and shade. Planks shall be fixed over 18 mm thick BWR grade plywood using approved adhesive and concealed nailing system, ensuring tight joints with maximum gap not exceeding 0.5 mm. The plywood shall be supported on hardwood sub-frame of section 45 x 35 mm, spaced at maximum 600 mm c/c (±5 mm tolerance), rigidly fixed using metal clamps and dash/anchor fasteners. All timber members shall be seasoned and treated with anti-termite and anti-fungal chemicals. Below the framework, 8 mm thick elastomeric shock absorption pads (minimum density 600 kg/m³) shall be placed at required intervals to provide resilient performance and load distribution. A continuous polyethylene vapor barrier (minimum 150 microns) shall be provided between sub-frame and base surface to prevent moisture ingress. The complete system shall be installed ensuring level variation not exceeding ±2 mm over 3 m span, with proper expansion gaps at periphery. Top surface shall be machine sanded (multi-stage sanding) and finished with minimum 3 coats of high-performance melamine coating, including sealer and top coat, achieving uniform matt/satin finish with anti-skid properties.

Uneven sanding, patchiness, or visible joints shall not be accepted. shall deliver impact vibration absorption suitable for auditorium use. Rate shall include complete sub-frame, shock pads, vapor barrier, fixing of teak planks, sanding, polishing, edge finishing, cut-outs, skirting interface, wastage, and installation, excluding cost of plywood , all as per drawings and direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Shining Sun / Viraaj Extrutech / Absolute Solutions / Audible.

ACOUSTIC CARPET FLOORING WITH UNDERLAY : Providing and fixing in position heavy-duty woven pile carpet of total thickness not less than 10 mm, having pile height minimum 6 mm, minimum pile weight 1000 GSM. Carpet shall be laid over closed-cell cross-linked polyethylene acoustic foam underlay of minimum 6 mm thickness and density not less than 30 kg/m³, having impact sound reduction properties, properly fixed to subfloor using approved adhesive. . Installation shall be carried out using full spread adhesive method, ensuring tight joints with seam strength not less than manufacturer’s standard, No visible joints. The complete system shall achieve impact sound reduction, Rate shall include surface preparation, adhesive, underlay, cutting, edge finishing, skirting interface, wastage, and complete installation as per drawings and direction of Engineer-in-Charge. The Materail shall strictly met the specs and should be approved prior to installation. Approved Makes: Milliken / Shaw Contract / Nexgen.

Audi. Hall wall Panelling

Providing and fixing acoustic wall panelling consisting of 2x50 mm (making box) in vertical studs of GI framework of India Gypsum ltd placed at 610 mm c/c vertically and horizontally fixed on wall with cleats (GI supported systems) and supplying and fixing 50mm thick glass wool with black glass fibre tissue facing (32 kg/cum) of U.P. Twiga and held in place at rear and front with 22 swg x 12. X12.5 mm gi chicken wire mesh with 25 mm air gap in the rear. In front, Providing and fixing Black cotton/jute @ Rs 50 /Rmt 40mmx 15mm European steam beech wood slats over a backing of 12mm thick duro marine ply strips 100mm wide at 610mm centre to centre fixed with screw/ rawel plugs etc if necessary as per architect’s direction. European steam beech slats to be melamine matt polished. The gap between the slats to be 8 mm. This paneling is proposed to be upto ceiling level from ground and at all sides of the front stage from bottom to the ceiling. (Fixed to the satisfaction of architect )

WOODEN SKIRTING : Providing and fixing in position machine-finished teak wood skirting of 15 mm thickness and 100 mm height, made from kiln-seasoned teak wood with moisture content between 8–12%, free from warping, cracks, or visible defects. Skirting shall be factory polished with minimum 3 coats of melamine finish (matt/satin), including sealer and top coat, achieving uniform shade and smooth surface. All edges shall be machine-cut with slight chamfer/rounded profile, and skirting shall be fixed using concealed screws with wooden plugs and approved adhesive, ensuring tight joints with maximum gap not exceeding 0.5 mm. Joints shall be properly aligned and finished without visible mismatch. Skirting shall be installed true to line and level, with proper alignment to wall finish and flooring junction. Necessary grooves/rebates (if required) shall be provided for flush integration with wall paneling or flooring system. Back surface shall be treated with anti-termite and moisture-resistant coating prior to installation. Rate shall include all necessary cutting, edge finishing, fixing hardware, adhesive, polishing touch-ups, wastage, and complete installation as per drawings and direction of Engineer-in-Charge.

AUDITORIUM SEATING -Godrej Jupiter Mid Back chair(with cupholder) MB (PUSH BACK TYPE - HIGH PERFORMANCE):The seat shall be made of Polyurethane Foam moulded with 1.5 ±0.1cm. thk. plywood insert measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric. Approx. Seat Size shall be: Depth: 42.0cm, Width @ rear: 44.0cm. Width @ front: 41.0cm. The back assembly shall be flexing type and made of Polyurethane Foam moulded with MS. tubular frame insert and shall be upholstered with fabric and back cover. The insert shall be made of 01.9 ±0.02cm x 0.16 ±0.0.128cm. thk.MS tubular frame with flexible nylon straps running across the length and width of the frame. Approx; Back-Size shall be: Height: 65.5cm, Width @ top: 34.5cm. Width @ seat level: 46.0cm. The HR polyurethane foam shall be moulded with density = 45 +/-2 kg/m3. The back cover and mechanism cover shall be vacuum formed from black ABS sheets. The Armrest understructure shall be upholstered PU foam moulded with MS insert. Arm tops shall be made of black Integral Skin polyurethane with 50-70 Shore 'A' Hardness & reinforced with wooden insert. Armrest width= 7.0 ±0.5cm and shall be offered as common/individual armrest between chairs.

• MS black powder coated (DFT 40-60 microns ) understructure with integrated, auto tip-up mechanism which folds the seat when not in use. • Footprint area of base plate shall be made of HR steel 15.0 ±0.2cm X 22.0 ±0.2cm X 0.5 ± 0.05 cm thick. • Backrest supporting beam width shall be-46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2 ±00.16cm MS tube. • Understructure fixed to ground by 200 mm to 250 mm Hilti hheavy duty dash fastners. The auditorium chair shall be designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368. Overall Dimensions of Chair shall be Seat Height - 46.5 cm, Height - 89.0 cm, Width & Depth of Chair Width(w1)-53.0cm(individual), width(W2) - 60.0 cm.(common arm) and Depth-69.0 cm.(normal) , Depth(D2)- 54.0(seat folded).UPHOLSTERY: Stitched fabric upholstery should be as per following specs. Std fabric (Glory shades) Wt.: 320 gm/running meter Fabric width: 1.2 M Specs: 100% Polyester

Providing & fixing ‘Unistone’ Wall Cladding Clay Tiles in size 230mm X 75mm X 17 mm thick in approved natural clay shade or ‘Terracotta’ non-pigmented made from natural clay. The appearance and shade of tiles should be natural terracotta having subtle variation in shade. The tiles would be made from special clay and firing temperature would be more than 1100 Celsius. The allowed variance in these tiles should not be more than ± 2.5 mm & top surface should be coated with Silicone and surface water absorption should not exceed 1% and by immersion method it should be less than 10%.

Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/Tubular Structure ( MS built-up section :-Rolled section & plates confirming to IS 2062 Grade Yst 350,Tubular Structure:- made from Steel hollow sections, ISI marked from SAIL / RINL / TATA/JINDAL, conforming to IS 1161/4923/1239, Minimum Yst 240 thickness upto 10mm ) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc. With special plate connectors, pinion joints, plates, hollow sections including Preparation of detailed fabrication and erection drawings of Structural steel work from design drawings issued by Engineer-In-Charge and incorporation of Engineer-In-Charge's comments on same, ransportation from fabrication yard, cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to make structure of Tensile Membrane shade. The tubular structure system with plate connectors, pinion joints, etc. is to be provided. The structure has to be provided as per conceptual drawings of Tensile fabric profile , including all arch beam, curved lateral beams and bracings, vertical support columns, nodal joints, ,bases of columns and high tensile bolts of grade not less than 10.9 having black phosphate coating. The complete structure to be Hot Dip Galvinized along with one coat of epoxy primer and two coats of Polyurethane paint on steel work at all locations prepared by sand blasting in required minimum 210 micron DFT (dry film thickness) for each coat as specified in particular specification. The work is to be executed as per technical specification and direction of Engineer-In-Charge.

Design, Supply Fabrication and installation of tensile membrane fabric type II -900 gsm ( Serge Ferrari) , Tenseo Edition TXS 900 F (B4616) both side PVDF coat,the base yarn should be better protected with thicker coating process for greater performance against UV exposure,Total Thickness-0.78mm,Acoustic Performance-Weaking Index-14dBA-ISO717-1,Light Transmission-5% UV Transmission 0%,yarns should be pre-stress with tensile strength 420/ 400 daN/ 5cm, tear strength 55/ 50 daN as per manufacturer's specification and 10 yearsmanufacturer warranty.Flame Retardancy B-s2-d0/EN13501-1, make Serge Ferrari or Verseidag equivalant. Including cutting, welding and cables, plates and necessary hardware for fixing the fabric as per approved shape.serge ferrari fabric manufacturer authorisation letter required. Membrane shall be cut and manufactured with high frequency PVC welding machine, cost of all materials complete as per directions.Quality in conformity with ISO9001,Enviornmental communication in conformity with ISO14021.

Providing and fixing white vitreous china wash basin under counter / Table Top basin, with C.I. concealed type brackets fixed to walls with GI rag bolts or approved fasteners etc., including 32 mm CP brass waste coupling, including painting of fittings and brackets, cutting and making good the walls wherever required all complete (Granite counter top will be measured and paid separately under relevent item): as per approved make and decision of engineer-in-charge

Providing and fixing CP brass auto closing system basin pillar tap / hand wash as approved by Engineer- In Charge

Providing and fixing CP brass single lever mixer system basin pillar tap / hand wash as approved by Engineer- In Charge

Providing & fixing in position GI 100x50 elbow floor drain including cost of cutting and making good the walls and floors wherever required.

Providing and fixing 125 mm dia S/S grating (with or without hole)for floor or Nahani trap.

Providing & Fixing water cooler wth stainless steel having storage capacity of 80 liter & cooling capacity 60 liter / hour with Reverse osmosis system & ultra voilet membrane TDS reduction 90% having automatic back wash system with filteration unit & all other required accessories complete in all respect as per direction of the engineer in charge .

Providing and fixing hand held ablution fitting (health faucet) with 1.2 meter long flexible tube and wall hook, all complete approved engineer-in-charge

Supply and fixing of 15mm CP brass 2 -Way Bib Cock with wall flange and suitable length CP brass extension pipe all of approved engineer-in-charge

Supply ,Erection , Testing & Commissioning of Automatic water level control panel & related accessories for pumping automation with consisting of automatic water level controller , level sensor with stainless steel probe, motorized butterfly valve, motorized valve controller with complete in all respect.

upto 50 mm dia. nominal bore

Providing and fixing HDPE Pop Up Sprinkler Irrigation System Pop height 100 mm with fittings all complete as per direction of engineer in charge.

Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete.

150 mm diameter

200 mm diameter

SUB HEAD -1.0 PIPING, HYDRANT , SPRINKLER AND ACCESSORIES SYSTEM FOR BUILDINGS

Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x 0.90 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in PO red colour suitable to accommodate, internal hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be fixed inside the FHC Cabinet Complete as required .

Supplying, installation, testing and commissioning of weather proof M.S hose cabinet of size 750 x 600 x 250mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following: - (for yard hydrant)

Providing and fixing standard firemans axe with heavy rubber handle.

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm.

Providing and fixing Fire Extinguishers (CO2 type powder ) 4.5 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers (A, B, C type powder ) 6 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing 25 mm dia Inspector Test Valve 25 mm with drain arrangement complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers Clean Agent capacity 2 Kg. complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers 50ltr. (Water & Foam type) complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers consisting of welded M.S. cylindrical body automatic modular CO2 type extinguisher.(Capacity 22.5 Kg.) complete with all accessories as per manufacturers specifications.

Supplying, installation, testing & commissioning of 13 Passenger , Gearless type,Machne room-less passenger lift having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed specifications as under and additional details given in schedule of technical particulars. Provisions of General CPWD specifications for lift works are to be followed.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points)

Primary point controlled by one MCB.

Same as item above but Secondary point. i.e. Points to be looped with Primary point with 2.5 sqmm wire and Point wiring

Supply, Installation, Testing and Commissioning of 5W Mirror Light.

Supply, Installation, Testing and Commissioning of 100W Led Spot Light.

Supply, installation, testing & commissioning of One Set of 1 Nos , 8 KVA UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 90 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other.

Supply, installation, testing & commissioning of One Set of 1 Nos , 4 KVA UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 90 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other.

Supply of Lightnig counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, meet the requirements for IS/IEC 62305 and IEC 62561-2.Tested for Electrical ,Mechanical and Chemical as per IEC 62561.

Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections.

50 mm x 6 mm thick Cu flat

50 mm x 6 m thick GI flat

11 KV HT DP STRUCTURE

RSJ pole of 9.15 mt length of size 175 x 90 mm complete with suitable M.S. base plate welded at bottombase plate - 2 Nos.

MS Channel of size 100 x 50 mm, length 4 mts (approx)

11 KV AB switch - 1 set

11 KV Horn Gap fuse Unit - 1 set

11 KV Lightning Arrestor

11 KV Disc insulator

11 KV Pin insulator

6 SWG copper wire for jumpering

Supply and erection of Stay set complete with necessary foundation, excavation and refilling of earth etc. as required.

Concrete foundation for RSJ poles burrioed upto a depth of 1830 mm in ground in a pit of size 450X450 mm in CC 1:3:6 along with 200 mm copping above ground inclusive of earth work.

Necessary Nut, Bolts, clamps, operating handle for AB switch, clamping welding etc. complete as required.

Painting the RSJ poles complete with two coat of Red Oxide and two coats of GI enamel paints complete as required.

11 KV H.T. METERING PANEL (INDOOR TYPE):

Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger ( SMPS Based ) with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 12 Nos. 20/16A DP MCB's (D.C. duty) as outgoing complete as required and as directed by Engineer Incharge.

DISTRIBUTION TRANSFORMERS

Supplying of following size of aluminum conductor, XLPE insulated armoured and over all PVC sheathed, 11 KV (E) grade earthed cable as per relevant IS code and technical specifications

Supply of fire buckets 4 No. in each set duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. Fire buckets shall be painted red from outside and white from inside with additional handle at the bottom and suitable for outdoor installation.

Supply and fixing on position the approved Single Line Diagram framed in 1000 x 800 mm size glass frame and installed in main switch room as directed by Engineer Incharge

Supply of First Aid box as directed by Engineer Incharge

Supply of tool kit with 1 pair 11 KV rubber hand gloves as directed by Engineer Incharge.

Supplying & fixing standard shock treatment charts in English & Hindi duly framed and covered with glass as directed by Engineer Incharge.

Providing Safety mat made of elastomeric polymers Material (Class B) 1.2 M wide with thickness 2.5 mm to withstand 12KV dielectric strength AS PER relevant IS Code

Providing a mat made of elastomeric polymers Material (Class A )1.2 M wide with 2 mm thickness to withstand 1.1 KV dielectric strength AS PER relevant IS Code

500 KVA (With Outdoor Acoustic Enclosure)

250 mm dia

SS Flexible Bellow 250 mm dia

Aluminium cladding for the Residential type silencers

MAIN LT PANEL

STAF QUARTER (TEACHING) PANEL

STAF QUARTER (NON TEACHING) PANEL

PRINCPAL QUARTER VTPN DB

AUDITORIUM & ACADEMIC BLOCK VTPN DB

2C x 6 Sq.mm.

2C x 4 Sq.mm.

3C x 6 Sq.mm.

3C x 4 Sq.mm.

4CX 2.5 Sq.mm

4C x 4 Sq.mm.

4C x 6 Sq.mm.

1C X 50 sqmm Cu flexible(Unarmoured) cable

7 C x 1.5 Sq.mm.

12 C x 2.5 Sq.mm.

4C/3C x 6/4 sq.mm.

4C/3C/2C x 4/6/2.5 sq.mm.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 6 sq. mm (28mm)

Raceways and Floor outlet box

150 mm x 40 mm x 2 mm thick

100 mm x 40 mm x 2 mm thick

50 mm x 40 mm x 2 mm thick

Supplying, installation, testing and commissioning of Gate light fitting suitable for 42 watt IP 65LED having system lumen output of minimum 4200 lumens complete with all accessories and lamp.

Supplying, installation, testing and commissioning of 70W LED Solar Street Light On 6 Meter GI octagonal Pole having Compact, Aesthetic, Eco friendly & modern integrated Solar street light in extruted Aluminum construction with high efficiency monocrystalline silicon photo voltaic panel, high efficacy SMD LED 6500K having secondary lens optics for street lighting distribution, high performance lithium battery, MPPT charge controller & Intelligent control module/sensor with higher reliability, long service life, suitable for easy & quick installation.

Providing, installation of 200 x 150 x 125 mm polycarbonate weather proof (IP-55) junction box and SP MCB’s and terminal block.

Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete.

Supply, Installation, Testing & Commissioning of 16TB Surviellance Hard Disk. Approved Makes: WD /segate /Toshiba/HP

Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display Panel. Approved Makes: Panasonic / LG/ Sony/ Samsung

SITC of Category 6 RJ45 Unshielded Modular Jack, ISO/IEC 11801:2nd edition, EN 50173-1, ANSI/TIA/EIA 568-C.2 Category 6, IEC 60603-7 (603-7), Interoperable and backwards compatible with Cat.5e, Universal 110 Impact Tool & Tooless (Both) Termination, Min. 250Mhz Bandwidth, 1G BASE T, IDC >= 200 Re-Terminations, >= 750 Plug Mating Cycles, 1.5A Current, 30lbs Plug Retention, UL Certified UL 1863, Strain Relief boot for Pairs, Bend Limiting Boot for Cable, Without Any OEM Proprietary Tool Termination Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24-Port 1U / 48-port 2U Unloaded Universal Modular Straight Patch Panel preloaded with cable support Bar (with slots to tie individual cable properly at the Support Bar), Stainless Steel Rear Metal Frame, Individual Port Transparent Shutter and Labelling, Preloaded earthing plug for surge protection, UL 1863 Complied, CRC Metal with Black Powder Coated, RoHS Compliant, Individually Replaceable Port IO, (Shuttered IO not recommended, because when shutter gets malfunctioned then entire IO is of no use) Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6 Patch Cord U/UTP Unshielded 24AWG Bare Copper, Stranded Flexible Conductor, HDPE Insulation, LSZH Jacket, ANSI/TIA 568C.2 Category 6 Patch Cord, Support 1GBASE-T with Min. 250Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.0mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, PC UL94-V-0, Factory assembled with Transparent Premoulded Boots, Length 1 Meter. ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6 Patch Cord U/UTP Unshielded 24AWG Bare Copper, Stranded Flexible Conductor, HDPE Insulation, LSZH Jacket, ANSI/TIA 568C.2 Category 6 Patch Cord, Support 1GBASE-T with Min. 250Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.0mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, PC UL94-V-0, Factory assembled with Transparent Premoulded Boots, Length 3 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of UK Style (Square) Keystone-Type Shuttered Faceplates, 1, 2 & 4 port configurations, White Color, Elegant 2 Piece (2 Plate) design for better aesthetics , Cover and Base Plastic Material ABS-UL94-V2, 86 x 86mm Approved Makes: Derwiser/Nexans/Siemon/Systimax

Supply, installation, testing and commissioning of 5 MP (2502 x 1944) Dome camera ,ONVIF profile S , G & T, M. CE , FCC Certified ,1/2.7” Progressive Scan CMOS. Color 0.004lux, Shutter speed1/5~1/200000s,I/O,1INand1OUT,DC12V/PoEIEEE802.3af).265/H.265+/H.264/H.264+/MJPEG, 256Kbps ~ 8Mbps, 256GB SD Card, Triple Stream, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, NFS/SMB/CIFS, SSL/TLS, P2P. Analytics: Face Recognition, Pedestrian & Vehicle, Intrusion, Line Crossing, Object Detection, Crossing Counting, Heat Map, Crowd Density, Queue Length, License Plate, Rare Sound, Intrusion, Region Entrance, Region Exiting. 7 users, IP67 & IK10, -30～+60°C, AES 256. Approved Makes :Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, installation, testing and commissioning of 5 MP (2502 x 1944) Bullet camera ,ONVIF profile S , G & T, M.CE , FCC Certified ,1/2.7” Progressive Scan CMOS. Color 0.004lux, Shutter speed1/5~1/200000s,I/O,1INand1OUT,DC12V/PoE(IEEE802.3af),H.265/H.265+/H.264/H.264+/MJPEG, 256Kbps ~ 8Mbps, 256GB SD Card, Triple Stream, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, NFS/SMB/CIFS, SSL/TLS, P2P. Analytics: Face Recognition, Pedestrian & Vehicle, Intrusion, Line Crossing, Object Detection, Crossing Counting, Heat Map, Crowd Density, Queue Length, License Plate, Rare Sound, Intrusion, Region Entrance, Region Exiting. 7 users, IP67 & IK10, -30～+60°C, AES 256. Approved Makes :Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, installation, testing and commissioning of 256 channel, Live and recording resolution up to 12MP, Recording bandwidth Incoming 1024 Mbps and outgoing 800 Mbps, RAM 32 Gb*2, Support RAID 0/1/5/6/10, Support Face detection and Recognition with Face Capture/Register quantity 1000000/ 10000, 512 User list, display out 3 HDMI and 1 VGA port, HDD: 16 SATA HDD Slots, Each SATA support up to 18TB, Operating temperature -10°C~+50°C. Approved Make:- Allgovision/ Impulse / Mobotix / Cisco/ Axis

Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 24*10/100/1000M RJ45 ports and 4*1/10G SFP+ fiber slot ports, Port 1-24 can support IEEE 802.3af/at PoE standard, switching capaticy of 598 Gbps, forwarding performance 95.23 Mpps, maximum PoE output power is 400W(at-600W), with 32K MAC address. Should have Static Routing , system logging, Telnet, SSH2.0, SNMP V1/V2C/V3, Network Time Protocol (NTP), FTP, TFTP, Xmodem. Approved Make :Cisco/ Impulse / Juniper / Nexxus

Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 10*10/100/1000M RJ45 ports and 4*100/1000M uplink SFP slot ports, Port 1-8 can support IEEE802.3af/at PoE. Support DC dual power supply input and DIN rail mounting. Switching capaticy of 256 Gbps, forwarding performance 20.83 Mpps, having 8 x 10/100/1000BASE-T PoE-plus(RJ45) with maximum PoE output power is 120W(at-240W). , with 2*10/100/1000Base-T uplink RJ45 ports 4*100/1000Base-X uplink SFP slot ports., 8K MAC address. Should have Static Routing , system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), and IPv6 features from day 1. Approved Make :Cisco/ Impulse / Juniper / Nexxus

Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest. Approved Makes: HP / DELL / IBM / LENOVO

Supplying, installing, testing and commissioning approved make Addressable Multi-criteria Photo-Thermal Above False Ceiling Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. The detector sensitivity (day & night) shall be controlled from the panel to get accustomed to the local environment.The detector shall comply UL268, 7th Edition guidelines. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supplying, installing, testing and commissioning approved make Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Detector shall comply UL521 guideline. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supplying, installing, testing and commissioning approved make Addressable Loop Powered Autoaligned Beam Detector. The beam detector shall be used for High Ceiling application with a detection range from 5 upto 100 mtrs and highly resistant to building movement; tolerates +/- 1° movement, Resistant to solid object intrusion, , Built-in imager heater, Resistant to strong light sources; does not alarm when saturated by sunlight, Automatic sensitivity threshold level settings and drift compensation. The detector shall be IP-55 compliant. Approved Makes: Notifier/ Farenhyt / Rux / Bosch UL/ Ansul / Gamewell/ Impulse

Supply, Installation, Testing & Commssioning of 1X500W Class-D Amplifier, which can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection and High Efficiency Class D Power Amplifier, 500W, 100V/70 Output, with 100 - 240 VAC input and 24 VDC backup power Supply

Supply and drawing of 2 C X 1.5 Sq mm multi stranded twisted shielded FRLS Copper cable.

SITC of Armoured 06 Core Singlemode (OS2) 9/125 Fiber Cable, ITU/T G.652.D, IEC 60794-1 Complied, Outdoor ECCS Armored Fiber Cable with PBT Loose Tube Filled With Thixotropic Jelly, Uni-Tube, 2 Steel Wire Embedded In HDPE Jacket, Water Swellable Tape Under Armor, UV-HDPE Jacket with 1.5mm Thickness, 7.5 +/- 0.5 mm Overall Diameter, Crush Resistant 2000N/100mm, Tensile Resistant 1000N, Bend Radius : 20 x Cable Diameter, Operating Temperature : -20 to + 60 Deg C, Max. Attenuation @1310nm & 1550nm : <= 0.35dB/km & <= 0.22dB/km Respectively, Cladding Non-Circularity ≤1%, Mode Field Concentricity Error ≤0.6 um, Coating/Cladding Concentricity Error ≤ 12 um, Nominal Weight 65Kg/km, Black Color Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 6 Port 1U x 19” LIU Loaded with Singlemode OS2 LC Adapters & LSZH Pigtails along with Splice Trays, Min. 4 No of Circular Cable Entry with Rubber Groummet/Glands to close any open entry, Cable Holders for Cable Entry Inside Panel, Heat Shrink Tubes for Splices, Tube for open fibers, Ties, Panel shall be Powder Coated with Min. 1.2mm Metal Sheath, 30 Years Channel Warranty. Factory Loaded LC Type LSZH Pigtails should meet IEC 61034-1 ,IEC-60332-1, IEC-60754-1, Insertion loss <= 0.35 dB, Return Loss >= 50, Attenuation: 1310/1550 : 0.3/0.2 dB/KM, Repeatability: <= 0.2DB 1000 Times Mating Cycles, RoHS Complied, Meets ANSI/TIA 568.3-D Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24 Port 1U x 19” LIU Loaded with Singlemode OS2 LC Adapters & LSZH Pigtails along with Splice Trays, Min. 4 No of Circular Cable Entry with Rubber Groummet/Glands to close any open entry, Cable Holders for Cable Entry Inside Panel, Heat Shrink Tubes for Splices, Tube for open fibers, Ties, Panel shall be Powder Coated with Min. 1.2mm Metal Sheath, 30 Years Channel Warranty. Factory Loaded LC Type LSZH Pigtails should meet IEC 61034-1 ,IEC-60332-1, IEC-60754-1, Insertion loss <= 0.35 dB, Return Loss >= 50, Attenuation: 1310/1550 : 0.3/0.2 dB/KM, Repeatability: <= 0.2DB 1000 Times Mating Cycles, RoHS Complied, Meets ANSI/TIA 568.3-D Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Fiber Patch Cord, LC Duplex - LC Duplex, 9/125μm OS2 Singlemode Duplex Zip Cord (<= 2.0mm), IL <= 0.35dB, RL>= 50dB, LSZH Jacket IEC 60332-1, Operating Temperature -40°C to +85°C, Meets ANSI/TIA 568.3-D, Length 3Meter Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat 6A, 23 AWG Bare Copper Solid Conductor U/UTP Unshielded LSZH Jacket (Min. 0.8mm Thickness), ANSI/TIA 568 C.2 Category 6A, Flame Rating IEC 60332-1, Halogen Acid IEC 60754 -1, Smoke Density IEC 60134-2, ISO/IEC 11801–2nd Edition, Min. 500 Mhz Bandwidth, Min. 10G BASE T, 7.2 mm Nominal Diameter, HDPE Insulation with Diameter 1.08 +/- 0.05mm, No Shield/Non Metallic Barrier Tape Inside Cable, Breaking Strength : >= 400N, Conductor Resistance <= 7.5 Ω /100m, Min. Elongation at Break of Insulation : 300%, Min. Jacket Tensile Strength >= 10 N/mm2 (Mpa), Dielectric Strength: DC 1500 V /Min., Euroclass Eca, RoHS Complied, Operating Temperature -20 to + 75 Deg C, IEEE 802.3bt Type 1, Type 2, Type 3, Type 4 PoE Complied, Propagation Velocity : 69% (nominal), Cable Roll of 305 Mtr, Cable shall not have any kind of Non Metallic Barrier Tape or Metallic Shield inside Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Category 6A RJ45 Unshielded Modular Jack, ISO/IEC 11801:2nd edition, EN 50173-1, ANSI/TIA/EIA 568-C.2 Category 6A, IEC 60603-7 (603-7), interoperable and backwards compatible with Cat.6, Universal 110 Impact Tool & Tooless (Both) Termination, Min. 500Mhz Bandwidth, 10G BASE T, IDC >= 200 Re-Terminations, >= 750 Plug Mating Cycles, 1.5A Current, 30lbs Plug Retention, UL Certified UL 1863, Strain Relief boot for Pairs, Bend Limiting Boot for Cable, Without Any OEM Proprietary Tool Termination Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 24-Port 1U / 48-port 2U Unloaded Universal Modular Straight Patch Panel preloaded with cable support Bar (with slots to tie individual cable properly at the Support Bar), Stainless Steel Rear Metal Frame, Individual Port Transparent Shutter and Labelling, Preloaded earthing plug for surge protection, UL 1863 Complied, CRC Metal with Black Powder Coated, RoHS Compliant, Individually Replaceable Port IO, (Shuttered IO not recommended, because when shutter gets malfunctioned then entire IO is of no use) Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6A Patch Cord U/UTP Unshielded 24AWG Bare Copper Stranded Flexible Conductor, HDPE Insulation, Transparent Cross (+) Filler Between Pairs, LSZH Jacket, ANSI/TIA 568C.2 Category 6A, Support 10GBASE-T with Min. 500Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.2mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, Factory assembled with Transparent Premoulded Boots, Length 1 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of Cat6A Patch Cord U/UTP Unshielded 24AWG Bare Copper Stranded Flexible Conductor, HDPE Insulation, Transparent Cross (+) Filler Between Pairs, LSZH Jacket, ANSI/TIA 568C.2 Category 6A, Support 10GBASE-T with Min. 500Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.2mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, Factory assembled with Transparent Premoulded Boots, Length 3 Meter, ETL/NABL Certified. Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of UK Style (Square) Keystone-Type Shuttered Faceplates, 1, 2 & 4 port configurations, White Color, Elegant 2 Piece (2 Plate) design for better aesthetics , Cover and Base Plastic Material ABS-UL94-V2, 86 x 86mm Approved Makes: Derwiser/Nexans/Siemon/Systimax

SITC of 42U Floor Standing Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment to conforms to DIN 41494 or equivalent ISO standard.Front Door should be Lockable Toughened Glass Door, Steel Single, Steel Dual. Standard Finish should be Powder Coated with Black colour. Mounting Option : Castor wheels (Front 2 wheels with Break and rear without break) Or Levelers Or Base plinth. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Size Options : 600 x 600 mm / 600 x 800 mm / 600 x 1000 mm / 800 x 1000 mm / 800 x 1200 mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 22U Floor Standing Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment to conforms to DIN 41494 or equivalent ISO standard.Front Door should be Lockable Toughened Glass Door, Steel Single, Steel Dual. Standard Finish should be Powder Coated with Black colour. Mounting Option : Castor wheels (Front 2 wheels with Break and rear without break) Or Levelers Or Base plinth. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Size Options : 600 x 600 mm / 600 x 800 mm / 600 x 1000 mm / 800 x 1000 mm / 800 x 1200 mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 15U Wall Mount Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment.: Conforms to DIN 41494 or equivalent ISO standard. Standard Finish should be Powder Coated with Black/Gray colour. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 450/500/600mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 6U Wall Mount Welded/CKD Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Adjustable 19” equipment mounting verticals provide better mounting flexibility and maximizes the usable mounting space.100% assured compatibility with all equipment conforming to DIN 41494. General industrial standard for equipment.: Conforms to DIN 41494 or equivalent ISO standard. Standard Finish should be Powder Coated with Black/Gray colour. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 450/500/600mm Approved Makes: Derwiser/MTS/Rittal/APC/APW

SITC of 15U Weatherproof Outdoor Enclosure. Wall / Pole Mount Outdoor IP65 grade or BETTER Steel. Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.. Steel,Racks should be made out of steel and proceeded with CNC Punching, forming, welding and powder coated. Front Door with IP 65 Filter & hood , IP Compatible lock. CRCA Sheet Steel, Flush Mounted with Gasket seal. # Door opening 130º angle with concealed hinges. Top and bottom panel Welded to frame with cable entry exit cut outs in Bottom. Canopy made from CRCA steel sheet folded & welded with cut-outs for air exhaust. Removable canopy for maintenance purpose. Welded Construction with Special Dual Coat Powder coated. Lockable Metal Front Plain Door.Colour coat RAL 7035. Static Load : 30 kgs.Standard Accessories Like Power Distribution Units, Cable Manager, Fans and Mounting hardware. Depth 400/600mm

Supply, Installation, Testing & Commissioning of Core switch minimum 48 x10G SFP+ Port, 4xQSFP28 Port.2XQSFP+ Ports Should have RPS and hot swappable PSU option from day 1. Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. switching capacity of1.92Tbps, forwarding performance 1400 Mpps, should have non-blocking architecture, 64K MAC address. Should have Static Routing, RIP, VRRP, OSPF ,BGP,PBR, PIM-SM,PIM-DM ,OSPFv3 ,VRF,ECMP.BFD - BGP,BGP4+,RIPng,URPF,ISATAP Tunnel from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of 24 port Distribution switch minimum 16 x10G SFP+ Port, 4xQSFP28 Port.8XSFP28 Ports.Should have RPS and hot swappable PSU option from day 1. Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. switching capacity of1.52Tbps, forwarding performance 1130 Mpps, should have non-blocking architecture, 64K MAC address. Should have Static Routing, RIP, VRRP, OSPF ,BGP,PBR, PIM-SM,PIM-DM ,OSPFv3 ,VRF,ECMP.BFD - BGP,BGP4+,RIPng,URPF,ISATAP Tunnel from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of Access switch 24x 1G PoE/PoE+ and 4 x 1/10GSFP+ ports. Should have hot swappable RPS from day 1, Should have AC and DC PSU mix and match arrangement for power source resiliency in the same hardware .Min 370 Watt PoE/PoE+ power budget . Should support 10 Gbps Copper module on SFP+ port for flexibility to utilize. Switching capacity of 168Gbps, forwarding performance 124 Mpps, should have non-blockingarchitecture,32KMACaddress.ShouldhaveStaticRouting,RIP,VRRP,OSPF,OSPFv3,RIP,BFDOSPF,BGP,PBR,ECMP,VRRP from day 1, Should support ISSU from day 1, Should support stacking with min 12 members in a stack(Stacking ports should be exclusive of above mentioned ports), Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1, MTBF Min 198000 Hrs. Approved Makes: Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of 8 Port POE+ Access Switches with switching capaticy of 96 Gbps, forwarding performance 71 Mpps, having 8 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 125W, with 4 x 10G SFP+ uplink ports. Should Non Blocking architecture , 16K MAC address. Should have Static Routing ,RIP,VRRP, OSPF from day 1,Should support ISSU from day 1 ,Should support stacking with min 12 members in a stack, Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr Approved Make : Cisco/ Nexxus/Juniper / Extreme/Impulse

Supply, Installation, Testing & Commissioning of fiber Modules 1000BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of fiber Modules 10G BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of fiber Modules 40G BASE Approved Make :Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of ITAM Web Appliance Hardware: Rack based Intel Core i7 or better, 3.20GHz w/ HD Graphics, Memory 32GB 4x8GB DDR4 2666MHz, Minimum 1 TB SATA/SSD Drive, Integrated NIC, COTS Compliant.Web Appliance Software: Capture specifications, warranties, Serial Numbers, MAC Addresses, IP info, what other H/W relates/connects to this H/W, item status, event logs, assignees, Specifications, License information, Aprroved Makes:F5/ Palo-alto / Juniper / Nexxus/Arista

Supply, Installation, Testing & Commissioning of 4x4 Access Point Ceiling Mount having 1 x 2.5GE (PoE/PoE+) port , 1 x G Copper port .For 2.4G 2*2 MIMO, For 5G 4*4 MIMO .Built-in omnidirectional internal antennas, Dual frequency with min 6 Stream .For 2.4G: 3dBi and for 5G: 3dBi.200 square meter coverage (without any obstacle).Maximum number of users per band should be minimum 128. power consumption:18W. Encryption: AES, WPA3\802.11i: Supported, Authentication: MAC Address/PSK, Client isolation: Both Layer-2 wireless client isolation and SSID isolation, forwarding security: Packet filter, MAC address filter, and broadcast storm suppression, SSID-VLAN binding: Supported, Management frame protection (802.11w): Supported. Should be CE, FCC, CCC, ROHS certified. Access Points should have option to be managed by cloud infrastructure without replacing the hardware in future required. Approved Make : Cisco / Juniper / Impulse / Nexxus/Arista

Supply, Installation, Testing & Commissioning of Pure IP at core server Based voice solution with 04 Port Voicemail ,04 Port FXS ,04 Port FXO , 1 PRI Trunk lines (30 Channel x 1 = 30) Circuit with CLIP Facility ,33 IP users & 250 analog user License ,01 Nos. IP Operator Console, 100 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, TEC should be with GR Number, - Should Support Redundant server in active-Active mode.

Supply, Installation, Testing & Commissioning of Type 1 IP Phone 2 VoIP account, 120x40 Dot-matrix screen with backlight, Full HD duplex speaker phone, IPV6, Gigabit Ethernet, PoE .

Supply, Installation, Testing & Commissioning of Type 2 IP Phone with 4 Voip accounts, 4 line keys, 3.5-inch (480x320) Colour Screen display with backlight, GigE, colour displays for 6 DSS keys, IPV6, 2 x Gigabit Ethernet , PoE.

Supply ,Installation ,Testing & Commissioning of 4 Door 4 reader access control panel with with buttons for entering and reading cards and exiting the door, Large capacity of 24,000 users, 100,000 offline storage records. TCP/IP high-speed communication, convenient LAN and WAN wiring, The card reader can be connected to the international standard Wiegand 26bit-34bit Powerful functions. In addition to the access control function, the software also presents attendance, online patrol, conference sign-in, fixed consumption, WEB mother card function, and more cost-effective. Approved Makes : Lenel / Honeywell / Impulse

Supply, Installation , testing and commissioning of 12 V SMPS DC Power Supply Unit, highly regulated and spikes free terminal voltage and heavy sourcing current for regulated terminal voltage. Approved Makes : Lenel / Honeywell / Impulse

Supply & Installation of Operation system: Windows xp and the upward system, such as: Windows 2000 、Windows XP 、 Windows7、Windows Vista、windows nt、Windows 2000 sever、Windows 2003 、Windows Server 2008 and so on Database :MS Access (the default database after installation is the bringing small database of operating system) MS SQL Server (suggest more than 200 people, or swiping card every day more than 1000 records, had better choose to use this article database.) Approved Makes : Lenel / Honeywell / Impulse

Supply, Installing, Testing & Commissioning of fingerprint, IC/ID swipe card Fingerprint capacity: 1000 pieces Short Range Multi Technology Smart Card Reader UL Listed For Exit of Lift Access Doors, tripod/Flap barrier- Entry & Exit (doors) as per the specification, with back plate & Back Box. Approved Makes : Lenel / Honeywell / Impulse

Supply ,Installation ,Testing & Commissioning of Smart Card Contactless transmission of data and supply energy (No battery needed), Operating Distance: Upto 100mm (Depending on Antenna Geometry), Operating Frequency: 13.56 MHZ. Approved Makes : Lenel / Honeywell / Impulse

Supply ,Installation ,Testing & Commissioning of Electromagnetic Lock 600 lbs, Single leaf, LED Status Display, Approved Makes : Assa Abloy / Ablesco / Impulse / BEL

Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23 AWG LSZH as per ANSI/TIA 568 C.2 and ISO/ IEC 11801–2nd Edition, ROHS Compliant, solid copper conductors, tested @250 Mhz, with HDPE insulation of individual conductor and over all Dia of 5.8mm for Connectivity of Hub room to End Point. Approved Makes: Derwiser/Nexans/Siemon/Systimax

Supply and Laying of 8 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers & the access controllers) Approved makes : Polycab/ Havells/Bonton/KEI/Fionlex

Supply and Laying of 4 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers & the access controllers) Approved makes : Polycab/ Havells/Bonton/KEI/Fionlex

Supply ,Installation ,Testing & Commissioning of U/L Clamp made of aluminium anodised for EM Lock. Approved Makes : Assa Abloy / Ablesco / Impulse / BEL

Supply , Installation , Testing and commissioning of Exit push button as required. Approved Makes : Lenel / Honeywell / Impulse

Supply and Fixing of 25 mm dia MS Conduit. Approved Makes : AKG / BEC / MK

Supply, installation, testing and commissioning of automatic electromechanical boom barrier suitable road width 5-7 mtrs for intensive applications, high speed with 4-6 second opening/closing time with Aluminium housing & aluminium boom with fork rest, IP 67 Protection etc. (for Gate Entry/Exit) Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of a set of Entry/Exit push buttons for manual open and closing of barriers etc. complete as required.(for Gate Entry/Exit). Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of Photocell based safety device to avoid closing of the barrier when a Vehicle is crossing the barrier. ( Anti Fall Protection ). Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply installation, testing and commissioning of Remote & Receiver. Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply , Installation , Testing and Commissioning of Loop detector for closing of the barrier when a Vehicle crosses the barrier. Approved Make: SPEEDGATZ /KABA/ELKA/ SYNERGY ACCESS

Supply, Installation, Testing & Commissioning of Long Range RFID reader with controller 10-12 mtr read range with suitable mounting arrangement for Outdoor Application and shall be compatible with boom barrier integration Approved Makes:- Speedgatz, Synergy, Kaba

Supply Installation Testing & Commissioning of 3mtr pole for mounting of RFID reader with all accessories complete as required. Approved Makes:- Speedgatz, Synergy, Kaba

Supply and programming of Wigand Proximity Cards/RFID Tagsa with credibility of having integrated 50 Readers integrated with Booms as a unified solution along with facility code as per specifications Approved Makes:- Speedgatz, Synergy, Kaba

Inline Fans

Air Quantity : 250 CFM

Air Quantity : 300 CFM

Air Quantity : 400 CFM

Air Quantity : 500 CFM

Air Quantity : 600 CFM

Plastic Propeller Fans

Air Quantity : 100 CFM

Air Quantity : 150 CFM

AXIAL FLOW FANS

Duty: Lift Well Pressurisation

Duty: Lift Lobby Pressurisation

Duty : Stair case pressurisation

Duty: Normal & Smoke Exhaust for Basement

Duty: Normal & Fresh Air in case of fire for Basement

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaust for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaust for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaus for Corridor

Duty : Normal & Fresh Air in case of fire for Corridor

Duty : Normal & Smoke Exhaus for Corridor

CONTROL & TRANSMISSION WIRING

Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for transmission

Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for remotes

DRAIN PIPING

25 mm dia

32 mm dia

REFNET (Y-JOINT )

Supply,installation,testing and commissioning of Y - Joints with necessary fittings as per specification.

VRV/VRF Central Controller for Indoor & Outdoor Units

Supplying, installing, testing and commissioning of Fresh Air powder coated Anodized extruded aluminium construction fresh air louvers (50 mm deep) (Fresh air louver with VCD , bird screen & rattle-free) complete as per specification.

Supplying, installing, testing and commissioning of Exhaust Air powder coated Anodized extruded aluminium construction fresh air louvers (50 mm deep) air louver without VCD , bird screen & rattle-free)complete as per specification.

Supply,installation and testing of double layer flexible duct connector consisting of a flame retardant fabric secured to extruded aluminium frame on both sides to provide a wear resistant airtight flexible connection. Fabric shall be mildew resistant, water proof and silicon impregnated.Flexible connector shall be supplied in accordance with the specifications and drawings.

MAIN HVAC PANEL

OUT DOOR PANEL

VENTILATION PANEL

SITC of high-performance passive constant curvature line array loudspeaker system of approved makes comprising a two-way passive design suitable for professional auditorium and installation applications. The enclosure shall consist of one 12” low-frequency/mid-frequency transducer (minimum 2.5” voice coil) employing advanced cooling technology, and a high-frequency section with custom Multidriver waveguide system incorporating a 1.4” exit compression driver with aluminium voice coil and titanium diaphragm, ensuring high intelligibility and consistent dispersion; the system shall provide a frequency range of 60 Hz – 20 kHz (-10 dB) and frequency response of 70 Hz – 18 kHz (±3 dB) with maximum SPL output exceeding 129 dB (LF) and 140 dB (HF), delivering high output capability suitable for medium to large auditoriums.The loudspeaker shall offer nominal coverage of 100° horizontal × 18° vertical, enabling precise audience coverage and array formation, and shall be acoustically optimized for use in arrays of up to 4 enclosures per vertical array, ensuring phase coherence and uniform sound distribution across the listening area ; the system shall have nominal impedance of 8 ohms (LF section) and shall support power handling of minimum 500W AES, 1000W program and 2000W peak (LF), suitable for use with external professional amplifiers; the enclosure shall include 2 × Neutrik NL4 connectors for input and link connections and shall support bi-amp or passive operation through appropriate processing.The cabinet shall be constructed from high-grade 15 mm birch plywood with durable polyurea coating for long-term reliability, and shall include a heavy-duty front grille with acoustic fabric backing for driver protection; the system shall incorporate integrated rigging hardware with adjustable splay angles (0°–6°) allowing flexible vertical array configuration, and shall be supplied complete with compatible flying frame, rigging accessories and mounting hardware for safe installation ; the loudspeaker shall be suitable for fixed installations, auditoriums, theatres and live performance venues, and shall be supplied complete with all necessary accessories, cabling interfaces and manufacturer authorization on company letterhead. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a compact two-way passive coaxial loudspeaker system suitable for short-throw and background sound reinforcement applications, comprising one 5″ coaxial transducer with a minimum 1.5″ LF voice coil and 1″ HF voice coil, capable of delivering a frequency range of 64 Hz – 20 kHz (-10 dB) and frequency response of 90 Hz – 20 kHz (±3 dB), with a sensitivity of 93 dB (1W@1m), nominal impedance of 16 ohms, and power handling of 150 W AES, 300 W program and 600 W peak, producing a maximum SPL in the range of 114 dB to 120 dB, and providing uniform 70° conical dispersion for consistent coverage; the enclosure shall be of bass-reflex design optimized for clear speech and music reproduction with low distortion, and shall be constructed from 9 mm premium birch plywood with durable Polyurea coating for long-term reliability in indoor installations; the system shall be compact, lightweight, and suitable for both fixed and portable applications, with provision for wall/ceiling mounting accessories; connectivity shall be via 2 × Neutrik Speakon NL4MP connectors; the loudspeaker shall be compatible with high-efficiency external Class-D amplification systems with recommended FIR-based DSP presets available through dedicated system processors, ensuring optimal performance, protection, and tonal consistency; the system shall be optimized for discreet architectural integration while maintaining high intelligibility and balanced frequency response, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: :LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a high-performance passive sub-bass loudspeaker system of approved makes suitable for professional auditorium, theatre and live sound reinforcement applications,the system shall comprise one 18” low-frequency transducer with minimum 4” voice coil, incorporating a high-efficiency neodymium magnet assembly and advanced cooling system for reduced power compression and improved thermal stability, ensuring high output and low distortion performance; the subwoofer shall provide a frequency range of 30 Hz – 140 Hz (-10 dB) and frequency response of 35 Hz – 125 Hz (±3 dB) with maximum SPL of not less than 132 dB, delivering deep and powerful low-frequency reinforcement suitable for medium to large auditoriums.The system shall have nominal impedance of 8 ohms, sensitivity of minimum 98 dB (1W/1m), and power handling capacity of 1200 W AES, 2400 W program and 4800 W peak, suitable for use with high-efficiency external Class-D amplifiers; the enclosure shall provide omnidirectional coverage and shall be optimized for both ground-stacked and flown configurations depending on system design; connectivity shall include 2 × Neutrik NL4-MP connectors for input and link operation, ensuring reliable and flexible system integration.The cabinet shall be constructed from high-grade 15 mm premium birch plywood with heavy-duty internal bracing to minimize resonance and distortion, and finished with durable polyurea coating for long-term reliability in professional environments; the enclosure shall incorporate aerodynamically optimized bass-reflex ports to reduce turbulence and port noise, and shall include a robust front grille with acoustic backing for driver protection; the system shall include integrated flying points and rigging provisions for safe suspension as part of a flown subwoofer array or cluster the subwoofer shall be designed for seamless integration with compatible full-range or line array systems, and shall be driven by dedicated system amplifiers with DSP-based processing including crossover, equalization, delay and protection functions to ensure optimal acoustic performance and system reliability; the unit shall be supplied complete with all necessary accessories, mounting hardware and manufacturer authorization on company letterhead. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of Rigging Frame for line array speakers & Subwoofers. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of wall bracket for fill speakers. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a high-performance self-powered stage monitor loudspeaker system of approved makes suitable for professional stage monitoring applications in auditoriums and live performance venues.The system shall be a two-way active coaxial design, comprising one 12” low-frequency transducer with minimum 3” voice coil and one high-frequency compression driver with minimum 3” voice coil and titanium diaphragm, ensuring coherent point-source performance, high intelligibility and uniform coverage across the monitoring area.The loudspeaker shall provide a frequency range of 60 Hz – 20 kHz (-10 dB) and frequency response of 75 Hz – 18 kHz (±3 dB), with maximum SPL of not less than 129 dB continuous and 132 dB peak, delivering high output capability suitable for stage monitoring of speech, vocals and instruments; the system shall provide nominal coverage of approximately 40° horizontal × 60° vertical, optimized for wedge monitoring applications with controlled dispersion and minimal feedback.The system shall incorporate integrated high-efficiency Class-D bi-amplification with total power of minimum 1500 W (LF: 750 W, HF: 750 W), powered by a switching-mode power supply with Power Factor Correction (PFC), ensuring stable operation over wide voltage ranges; the loudspeaker shall include onboard DSP processing with high internal resolution (minimum 56-bit) and FIR linear phase filtering, providing functions such as equalization, crossover, delay, and comprehensive protection including RMS limiting, peak limiting, thermal protection and system monitoring.The unit shall support analog balanced XLR input with loop-through output, and optional Ethernet connectivity for remote control and monitoring through dedicated software platform; the enclosure shall be constructed from premium 15 mm birch plywood with durable polyurea coating, featuring a robust steel front grille with acoustic backing, ergonomic handles, and wedge-shaped design suitable for stage floor placement; the system shall operate on 230V AC, 50/60 Hz and shall include Neutrik powerCON TRUE1 connectors with looping output, ensuring reliable power connectivity.The loudspeaker shall be suitable for use as stage monitors, side fills or portable reinforcement systems, and shall be supplied complete with all required accessories, cabling and manufacturer authorization on company letterhead, ensuring compliance with project specifications and long-term operational reliability. Approved Make:LACOUSTIC/D&B AUDIOTECHNIK/LYNX PRO

SITC of a professional four-channel high-power Class-D power amplifier of approved makes suitable for driving line array systems, full-range loudspeakers and subwoofers in auditoriums, open-air theatres and large venue sound reinforcement systems; the amplifier shall be based on Class-D topology with high-efficiency switch-mode power supply (SMPS) and Power Factor Correction (PFC), ensuring high efficiency, reduced heat dissipation and stable performance under varying power conditions;the amplifier shall deliver a minimum output power of 4 × 2500 W @ 8 ohms, 4 × 4000 W @ 4 ohms, and shall support bridged mode operation up to 8000 W per channel, providing sufficient headroom for high-performance loudspeaker systems including line arrays and subwoofers; the unit shall have a frequency response of 20 Hz – 20 kHz (±1 dB) and total harmonic distortion of <0.5%, ensuring accurate and low-distortion audio reproduction;the amplifier shall provide a signal-to-noise ratio of ≥110 dB, high damping factor (>1000), and low crosstalk, ensuring precise low-frequency control and overall audio clarity; the unit shall support adjustable gain and input sensitivity compatible with professional DSP processors and mixing consoles;the system shall include balanced XLR inputs and professional speaker outputs via Neutrik Speakon connectors, ensuring secure and reliable connectivity; the amplifier shall incorporate comprehensive protection features including short circuit protection, thermal protection, overload protection, clip limiting, DC protection and soft-start circuitry, ensuring safe and reliable operation in demanding environments;the amplifier shall feature an integrated DSP (if applicable) with functions such as equalization, crossover, delay, limiter and preset management, enabling optimized system performance; the unit shall include a front-panel display (LCD/TFT) with control interface for monitoring and configuration;the amplifier shall be housed in a compact rack-mountable chassis (typically 1U–2U) with intelligent forced-air cooling system, suitable for continuous operation in indoor and outdoor environments; the unit shall operate on a universal power supply (100–240V AC, 50/60 Hz) and shall be suitable for installation in standard equipment racks;the system shall be supplied complete with all necessary accessories, interconnections and manufacturer authorization on company letterhead, ensuring compliance with project specifications and long-term reliability Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional high-power Class-D power amplifier of approved makes , designed for installation and live sound applications, featuring a high-efficiency switching-mode power supply with active Power Factor Correction (PFC) for reduced mains current consumption and stable operation over a wide voltage range of 100–260V AC, 50/60 Hz; the amplifier shall be available in high-power configurations including 2 × 4500 W, 2 × 3000 W, 1 × 9000 W and 1 × 6000 W, delivering a frequency response of 20 Hz – 20 kHz (±1 dB @ 8 ohms), total harmonic distortion of less than 0.5% at 1 kHz, signal-to-noise ratio greater than 110 dBA, crosstalk exceeding 70 dB (20 Hz – 1 kHz), input impedance of 20 kΩ, and adjustable gain between 32 dB and 41 dB, with a high damping factor greater than 5000 ensuring precise loudspeaker control; the unit shall incorporate comprehensive protection mechanisms including short-circuit, overload, auto-limiting, and AC/DC fault protection for reliable continuous operation; the amplifier shall provide high output power with optimized energy efficiency, with power consumption significantly reduced through PFC technology, and shall be housed in a compact 1U, 19″ rack-mount chassis featuring a front-panel 2″ TFT full-vision IPS color display for monitoring and configuration; the system shall be suitable for driving a wide range of high-performance loudspeaker systems and enable flexible system design with minimal amplifier models, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional high-power Class-D multi-channel power amplifier of approved makes, suitable for installation and live sound reinforcement applications, featuring a high-efficiency switching-mode power supply with active Power Factor Correction (PFC) for reduced current consumption and stable operation over a wide voltage range of 100–260V AC, 50/60 Hz; the amplifier shall be available in 2-channel and 4-channel configurations with output ratings up to 4 × 2500 W, 4 × 1500 W, 2 × 5000 W or 2 × 3000 W, delivering a frequency response of 20 Hz – 20 kHz (±1 dB @ 8 ohms), total harmonic distortion of less than 0.5% at 1 kHz, signal-to-noise ratio greater than 110 dBA, crosstalk exceeding 70 dB (20 Hz – 1 kHz), input impedance of 20 kΩ, adjustable gain between 32 dB and 41 dB, and a high damping factor greater than 5000 for precise loudspeaker control; the unit shall incorporate comprehensive protection circuits including short-circuit, overload, auto-limiting, and AC/DC fault protection, ensuring reliable long-term operation; the amplifier shall be capable of delivering high continuous output power with optimized mains consumption (approximately one-third of output power due to PFC efficiency), and shall be housed in a compact 1U, 19″ rack-mount chassis featuring a front-panel 2″ TFT full-vision IPS color display for monitoring and configuration; the system shall be designed for compatibility with high-performance loudspeaker systems, enabling flexible system configurations with minimal amplifier models, and must be supplied with manufacturer authorization on company letterhead along with all required accessories and documentation. Approved Make: Lynxpro/QSC/POWERSOFT

SITC of a professional digital audio mixing console of approved makes designed for live sound reinforcement, auditorium, and installation applications, featuring advanced 96 kHz XCVI FPGA processing delivering ultra-low latency performance (≤0.7 ms) and high-resolution audio quality, with a minimum of 48 input processing channels, 36 buses, 12 stereo mixes plus LR, and 3 stereo matrices, along with 8 internal stereo FX engines with dedicated returns; the console shall provide a minimum of 24 onboard mic/line inputs (XLR) with recallable preamps and phantom power, additional stereo line inputs, and at least 16 balanced XLR outputs along with AES digital output, and shall support flexible routing and patching across all inputs and outputs; the system shall include comprehensive channel processing with 4-band fully parametric EQ, high-pass filters, gate, compressor, delay, and graphic EQ options on mixes, along with automatic microphone mixing capability; the control surface shall incorporate a minimum of 25 motorized faders arranged across multiple layers, a 7-inch capacitive color touchscreen interface, dedicated channel LCD displays, and assignable soft keys for intuitive operation; the console shall support remote control and monitoring via Ethernet using dedicated software and mobile applications, and shall include a built-in 32×32 USB audio interface for multitrack recording and playback along with direct USB recording capability; the system shall be expandable via SLink port for connection to remote stage boxes and shall include a 64×64 I/O expansion slot supporting audio networking protocols such as Dante, Waves, or MADI; the unit shall be housed in a robust chassis suitable for professional touring and fixed installations, and shall be supplied complete with all necessary accessories, software, and manufacturer authorization on company letterhead. Approved Make: Behringer / Yamaha / Allen&Heath

SITC of a professional remote audio expander / stage box of approved makes designed for live sound, auditorium, and installation applications, featuring a minimum of 16 remote-controlled mic/line inputs with high-quality recallable preamps and phantom power, and 8 balanced XLR outputs, operating at 96 kHz sampling rate for high-resolution audio performance with low latency; the unit shall be compatible with digital mixing systems via a single Cat5e/Cat6 connection using a proprietary or standard audio transport protocol (such as SLink), supporting connection to compatible digital mixers and expansion modules with redundant or daisy-chain capability; the stage box shall provide locking XLR connectors, status LEDs for signal and phantom power indication, and robust gain control and preamp recall from the connected console; the enclosure shall be of rugged construction suitable for stage floor or rack mounting, with provision for wall or stage installation, and shall be powered via an external PSU or PoE-compatible system as per manufacturer design; the unit shall support flexible placement on stage, minimizing analog cable runs and improving system noise performance; the system shall be suitable for integration in professional audio networks and shall be supplied complete with required power supply, mounting accessories, and manufacturer authorization on company letterhead.Make: Yamaha/Allen & Heath/Klark Teknik

SITC of a professional digital loudspeaker management system / DSP processor of approved makes featuring 4 analog inputs with additional AES3 digital input and 8 balanced XLR outputs, designed for high-performance sound system processing with support for input levels up to +24 dBu and a dynamic range of minimum 121 dB; the unit shall incorporate high-resolution AD/DA conversion with 32-bit converters and DSP processing with 64-bit double precision at 48 kHz, ensuring superior audio quality, low distortion, and accurate signal handling, with overall system latency not exceeding approximately 1.2 ms; the processor shall include advanced FIR linear phase filtering with up to 1000 taps per output channel, along with independent phase equalization capability and auto-equalization features allowing replication or matching of target response curves, including magnitude and phase adjustments; the system shall provide comprehensive equalization options including high-pass, low-pass, and multiple parametric EQ bands across input and output channels, along with configurable crossover filters (Linkwitz-Riley, Butterworth, Bessel up to 48 dB/oct), delay up to minimum 200 ms, and full matrix routing with simple, basic, and advanced (mixer mode) configurations; dynamics processing shall include dual-stage protection with RMS limiter-compressor (threshold in watts) and peak limiter (threshold in volts) per output channel, ensuring optimal transducer protection and performance; the unit shall support extensive preset management with storage capacity of up to 999 user, snapshot, and system presets, and shall offer control and monitoring via Ethernet and USB through dedicated software platform with features such as grouping, copy/paste, EQ import/export, and integration with measurement systems; the hardware shall be housed in a standard 19″ rack-mount chassis (1U), powered via universal switching power supply (85–240V AC, 40–400 Hz), with front panel IPS color display, encoder, and dedicated control buttons, and shall be suitable for fixed and touring applications, complete with manufacturer authorization on company letterhead and all necessary accessories and documentation. Approved Make:Extron/Lynxpro/BIAMP

SITC of Digital Wireless headset mic ; polar pattern: cardioid;pre-polarized condensor microphone;Audio frequency response: 20Hz-20KHz;Sound pressure level: 150 dB SPL;Sensitivity:1.6 mV/Pa;complete with all accessories as required. Approved Make: Sennheiser/ Shure/ DPA

SITC of set of antenna system set with 2 nos of antennas, antenna splitter, antenna cables . The antenna should be of same OEM as of microphones .System should be complete with all accessorie Approved Make: Sennheiser/ Shure/ DPA

SITC of Dynamic cardioid microphone with on/off switch for speech and vocals,frequency response 45 Hz- 16KHZ or better, nominal impedence 350 ohm or better,feedback rejection, rugged metal housing complete with all accessories Approved Make: Sennheiser/ Shure/ DPA

Supply and installation of drum kit with 7 microphone set Approved Make: Sennheiser/ Shure/ DPA

SITC of Professional installation projector featuring a bright single-chip DLP laser phosphor light engine with a native WUXGA (1,920 × 1,200) resolution and up to approximately 11,000 ANSI lumens brightness for clear, high-impact image projection. The projector supports 16:10 aspect ratio and delivers strong contrast performance with both sequential and dynamic contrast control for vibrant visuals and detail in diverse lighting conditions. A laser phosphor light source provides up to 20,000 hours of service life with low maintenance compared to traditional lamp-based designs, and constant light output (CLO) ensures uniform brightness over time. Connectivity includes multiple digital inputs such as 2× HDMI 2.0, 1× DVI-D, HDBaseT, and 3G-SDI, plus network control over RJ45, facilitating flexible integration with AV systems; support for 4K input signals (scaled to WUXGA) and active stereoscopic 3D capability expands usage across varied content formats. Installation flexibility is enhanced with wide optical lens shift, motorized zoom and focus, and compatibility with a range of interchangeable G-lenses. The projector is built for 360° orientation, supports embedded warp and blend via management tools, and offers low audible noise (~35–39 dB). Typical power input 100–240 V AC, robust casing and network control options make it suitable for conference halls, auditoriums, houses of worship, museums, and immersive environments where reliable, high-quality projection is required. Approved Make: Optoma / Panasonic / Barco

SITC of a heavy-duty motorised projection screen of approved makes designed for large venue applications including auditoriums, theatres, and convention halls, having a diagonal size of 371"(26 feet x 16 feet) in 16:10 aspect ratio, comprising a high-quality matte white projection surface with nominal gain of 1.0 ensuring uniform brightness, wide viewing angles, and accurate colour reproduction suitable for high-lumen laser projectors; the screen fabric shall be seamless or precision-joined with minimal visible joints, flame-retardant and mildew-resistant, and shall provide a smooth, flat viewing surface supported by tab-tensioning or equivalent system to prevent wrinkles and edge curling; the screen shall be housed in a robust heavy-gauge aluminium/steel casing with durable powder-coated finish, designed for ceiling or wall mounting, and shall incorporate a high-torque, low-noise tubular motor with smooth and reliable up/down operation, complete with limit switches for precise positioning; the system shall support multiple control options including wall switch, RF/IR remote, and dry contact/relay interface compatible with AV control systems, with provision for integration into centralized control platforms; the installation shall include all necessary mounting brackets, suspension hardware, power cabling, and control accessories, and shall be executed with proper alignment, leveling, and commissioning to ensure optimal screen flatness and performance; the system shall be suitable for continuous operation in professional environments and shall be supplied complete with manufacturer authorization on company letterhead along with warranty and all required documentation. Approved Make: Da-Lite / Draper / VAV/Telone

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

Supply, Installation, Testing & Commissioning of customised display mount for above displays

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

SITC of 4K UHD LED display,scren size- 55” diagonal,aspect ratio-16:9, 24/7 operation,HDMI INPUT: 3 nos, USB INPUT (2.0 SUPPORT): 2 nos,USB 3.0:1 nos;Built in Wi-Fi,HDMI CEC Enabled;Built-in Chromecast ;Android 11;Built in Google assistant and Google playstore ;.Cortex-A55 x4,1.3GHz;Mali G31 MP2, Open GL ES3.2Mali G31 MP2, Open GL ES3.2;Mali G31 MP2, Open GL ES3.2;6GB EMMC;2.0GB, DDR3 2133Mhz;complete with wall mount. Make: Viewsonic/Panasonic/Samsung

Supply, Installation, Testing & Commissioning of AI based Full 4K @ 60fps Presenter PTZ Tracking Camera with Dual Camera- one PTZ Camera for Presenter Tracking and second fixed lens Panoramic Camera. PTZ Presenter Camera should support min 30X Zoom and 8x Digital Zoom with Panning range of +170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees, Field of View for PTZ Camera should be min 58 Degree and for Panoramic Camera min. 85 Degree, camera should support simultaneous outputs through HDMI, 3G-SDI, USB 3.0 and IP with 1x Audio In and can be controlled via RS232 and IP. Should support multiple video streams with PIP. Tracking Camera should support Everywhere Tracking, Partition Tracking, Auto Framing & Gesture Control. Should support PoE+ and Virtual USB Driver. Quoted model should be BIS, CE, FCC , Clickshare & RoHS Certified with Test Lab Reports. Approved Make: Lumens/ Sony/ Datavideo

SITC of IP+RS 232/VISCA based Joystick Controller SITC of Joystick with 3" LCD for Preview Monitoring, PAN/Tilt/Zoom Control, Communication via IP & RS232C/RS455 Interfaces, Auto Backlit Keys, Should be able to control minimum 200 Cameras on IP & 10 Cameras through RS232/422, Should support VISCA, VISCA Over IP protocols & PoE. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports. Approved Make: Lumens/ Sony/ Datavideo

SITC of a professional 1G AV over IP encoder of approved makes capable of encoding high-quality video and audio signals for transmission over standard IP networks supporting HDMI 2.0 and VGA input interfaces with maximum input resolution up to 4K UHD (4096 × 2160 @ 60Hz, 4:2:0) and delivering encoded output up to 4K @ 30Hz (4:4:4) with visually lossless compression and ultra-low latency performance suitable for real-time applications; the unit shall transmit AV signals over Cat6/6A/7 cabling via Gigabit Ethernet (RJ45) and support multicast streaming enabling one-to-many and many-to-many distribution across multiple decoders without dedicated matrix hardware; the encoder shall support embedded and de-embedded audio, HDMI audio formats including LPCM and bitstream, and shall be compliant with HDCP 2.2 for secure content transmission; the device shall include control interfaces such as RS-232, IR (in/out), and USB for KVM functionality, enabling remote control of source devices over the IP network; the system shall support Power over Ethernet (PoE IEEE 802.3af) as well as external DC power supply for flexible installation, and shall be compatible with centralized control systems for matrix switching, video wall configuration, and system management via intuitive web-based GUI; the encoder shall be housed in a compact, robust metal enclosure suitable for continuous professional use in auditoriums, command centers, and broadcast environments, with low power consumption (approx. 7–10W) and reliable operation in typical indoor conditions, complete with all required accessories and manufacturer authorization on company letterhead. Approved Make: Crestron/AMX/Lumens

SITC of a professional 1G AV over IP decoder of approved makes capable of decoding high-quality video, audio and control signals over standard IP networks supporting HDMI 2.0 output with maximum resolution up to 4K UHD (4096 × 2160 @ 30Hz, 4:4:4) and 4K@60Hz (4:2:0), delivering visually lossless video with ultra-low latency suitable for real-time applications; the unit shall receive AV streams via Gigabit Ethernet (RJ45) over Cat6/6A/7 cabling and support multicast streaming enabling one-to-many and many-to-many AV distribution without dedicated matrix hardware; the decoder shall include multiple outputs including HDMI and VGA for display connectivity, along with digital (S/PDIF) and analog stereo audio outputs, and shall support HDMI audio formats including LPCM and bitstream; the system shall provide USB over IP functionality with minimum 2 × USB 2.0 and additional USB ports for keyboard, mouse and peripheral connectivity enabling full KVM control of remote computers, along with RS-232, IR (in/out) interfaces for device control and integration with third-party control systems; the decoder shall support HDCP 2.2 compliant content, built-in scaling and frame rate conversion to ensure compatibility with different display resolutions, and shall allow creation of video walls with portrait and landscape orientation; the unit shall support Power over Ethernet (PoE) as well as external power supply, with low power consumption and reliable operation, and shall be configurable via web-based GUI with compatibility for third-party control platforms; the device shall be housed in a compact, robust enclosure suitable for continuous professional use in auditoriums, control rooms and AV installations, and shall be supplied complete with all necessary accessories and manufacturer authorization on company letterhead. Approved Make: Crestron/AMX/Lumens

SITC of a centralized AV over IP system controller of approved makes designed for management and control of distributed AV over IP systems capable of controlling multiple encoders and decoders over standard IP networks enabling flexible matrix switching, video wall creation, and KVM functionality from a single interface; the controller shall support centralized management of AV streams with the ability to route any input source to any display output through an intuitive web-based graphical user interface (GUI) with drag-and-drop functionality, real-time preview, and customizable layouts, supporting group control, macro commands, scheduling, and automation features for seamless operation , the system shall include dual Ethernet ports (dedicated control and AV network), HDMI output for monitoring, USB interface for KVM control, RS-232, IR and trigger ports for integration with external devices and third-party control systems; the controller shall support Power over Ethernet (PoE IEEE 802.3af) as well as external DC power supply with low power consumption (approx. 3W), and shall be capable of operating in conjunction with AV over IP encoders and decoders to enable scalable, low-latency video distribution across multiple zones , the unit shall be housed in a compact, robust metal enclosure suitable for continuous professional operation in auditoriums, control rooms, and enterprise environments, and shall be supplied complete with all required accessories, software, and manufacturer authorization on company letterhead.Approved Make: Crestron/AMX/Lumens

SITC of a professional all-in-one portable video production and streaming system of approved makes comprising a 12-channel HD digital video switcher integrated within a hand-carry portable suitcase unit, supporting video formats 1080p, 1080i and 720p, designed for live production, streaming and recording applications; the system shall provide a minimum of 12 video inputs including 8 × 3G-SDI and 4 × HDMI inputs supporting resolutions up to 1080p50/60, and a minimum of 9 video outputs including 5 × SDI assignable outputs, 1 × HDMI assignable output and 3 × HDMI program outputs, with flexible crosspoint (XPT) assignment; the switcher shall support advanced video processing features including MIX, CUT, WIPE transitions (minimum 32 patterns), DVE effects, minimum 4 upstream keyers (USK) with chroma key capability, minimum 2 downstream keyers (DSK) with key and fill, and multi-window display capability with up to 8 Picture-in-Picture (PiP) layers including flexible source assignment; the system shall include an integrated character generator (CG) interface (such as CG-200 or equivalent) supporting insertion of static and animated graphics/logos (minimum 2 configurable layers), lower thirds, titles and overlays, and shall support advanced transitions including stinger transitions suitable for live events and sports applications; the unit shall incorporate a built-in minimum 17.3-inch Full HD monitor for multiview and preview/program monitoring, along with an integrated H.264 hardware streaming encoder and recorder capable of simultaneous live streaming and recording over IP networks and local storage; the system shall support audio embedding/de-embedding, multi-channel audio mixing, and synchronization with video inputs, and shall provide control via built-in panel, external control interfaces and network-based management; the unit shall be housed in a rugged portable enclosure suitable for field and auditorium use, with reliable power supply, efficient cooling, and continuous operation capability, complete with all required accessories, cabling and manufacturer authorization on company letterhead.Approved Make:Blackmagic Design/Datavideo/AIDA

SITC of Customised Metallic house structure, powder coated with caster wheels & brakes. Drawer for keyboard, mouse and document camera. Wooden Top Tray for placing document & Laptop. All drawers sliding tray and doors should be Lockable. External Connectivity: Cablecubby provision Having 1 X USB A,1 X C-USB,1 HDMI IN,Power Socket with ON/OFF. One MIC XLR for microphone; Motorized tilting adjustment for chainging viewing angle. Minimum 6 Universal rating 5 Amp Socket. Provision to fix Logo space at the front side. Provision of 19"inch Rack inside podium to fit in international standerd equipment. Access doors for servicing both from front and back side of the podium. Wire manager on left & right side and at bottom for flexibility of managing additional wire/wiring. ( FULL HD ) 22”LCD Tablet Monitor with Resolution 1920 x 1080 . View Area 476.64(H) x 268.11(V)mm – 22 inch. Luminance ,White 250 cd/㎡. Colour : 16.7M, Dynamic Contrast Ratio 50,000:1 . Viewing Angle 85˚+85˚H and 80˚+80˚ V. Lamp Life Time 20,000 Hrs (min ). Technology Electromagnetic Resonance. Detectable Height 3~10mm. Position Report Rate 138pps. Pressure Resolution 1024 Level. CapacitiveTouch Technology:Projected Capacitive. Detacted object Fingers, or Conductive material. Tracking speed : 133<-/Capacitive single :100:Multy:95. Accuracy : +-0.5mm /+-3mm (Edge)3mm wide. Detect height 0-10mm. Touch Points 10 Points.Approved Make: UNI/AHA/VACOM

Floor Box:- Supply, Installation, Testing & Commissioning of Floor BOX with Power/LAN/XLR Connectivity Approved Make:Ahuja/VAV/Custom

Floor Box:- Floor Box : 4 x XLR Point Input Stage / Floor Box Approved Make:Ahuja/VAV/Custom

Floor Box:- Floor Box : 2 x XLR Point Input Stage / Floor Box Approved Make:Ahuja/VAV/Custom

SITC of Integrated Controller, Dual Network Interface card, Should support IPv6 ,Should Supports IEEE Standard for Port-based Network Access Control with the ability to grant or deny network access to devices wishing to attach to a LAN based on credentials tied to the device rather than to a user ,Should have High Performance Architecture, Flexible Programming Platform (Java) ,Should have ability to manage secure port TLS and SSH communications with a remote device or server Enhanced Diagnostics On Serial and IR Ports ,Hardware / Software should be Built for 24/7/365 Operation ,Should have Ultra-Fast 1600 MIPS processor , 512 MB Onboard RAM , 1 M Non-Volatile Memory, 8 GB SDHC FLASH Memory ,1 RU Rack Space ,10/100 LAN Interface ,4 Digital I/O Ports , 1 RS-232/422/485 Port , 3 RS-232-Only Ports , 4 IR/Serial Output Ports , 4 Relay Ports ,Regulatory Compliance :RoHS ,WEEE.Approved Makes AMX/EXTRON/CYPRESS

SITC of 10.1”Table Top Touch Panel ;Display Size 10.1” Diagonal;Display Type TFT-LCD, IPS;Resolution:1920x1200;Aspect Ratio:16:10 landscape;Brightness 350 nits (cd/m2);Contrast Ratio >800:1;Illumination: LED backlight;Touch Overlay:Capacitive touch; >5 points touch panel with palm rejection and wet finger operation. Anti-fingerprint; Anti-microbial coating;RAM:4GB, LPDDR4;Storage:16 GB eMMC;RJ-45, POE 802.3af, 15.4W;USB Type C OTG, USB Type 2.0;Camera:5MP front-facing, with Fixed Focusing Lens;Speakers:2 x 2W;POE:RJ-45, POE 802.3af, 15.4W Approved Makes AMX/EXTRON/CYPRESS

SITC of i7 PC with 16GB RAM, 500 GB SSD .For Soft VC and Operation.Approved Make: Dell/HP/Acer

SITC of Wireless Access Point.Should have one 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink™ (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Should have Internal antenna 3.8/4.5dBi (2.4GHz/5GHz).Should have standards IEEE 802.11AX,IEEE 802.11ac,IEE 802.11n standard, 2.4GHz and 5GHz,WMM - Wireless MultiMedia Prioritization,WDS- Wireless Distribution System,Power over Ethernet (PoE) IEEE 802.3af/802.3at.Should have security features like Wi-Fi Protected Access (WPA3),SSL,Wireless access control to identify authorized wireless network devices,MAC address filtering with access control,Basic Service Set Coloring (BSS Coloring),Security Socket Layer (SSL) remote management login.Should have Remote configuration and management feature through Web browser, SNMP or Telnet. setup, monitoring and management through Standalone, Software\ Cloud based controller and Mobile App. Manageability As standalone and If software\ Cloud based controller than 5 years cloud licence should be including without extra charges. Should have advance wireless features like OFDM/OFDMA, Wireless backhaul to form Mesh Network,Bridge mode: Point-to-multipoint wireless WDS mode, Adjustable Transmit Power Control (TPC) Device detection.PoE power consumption should not be more than 25.5W Watts.Bandsteering, Guest Network/Captive Portal, Bandwidth management, Link Layer Discovery Protocol.Target Wake Time (TWT) feature.Block SSID Broadcast feature.can be Ceiling mounting/ Wall mounting.Should be from the same OEM as Ethernet switch.No repair products & replacement with New box.Lifetime free latest firmware support. Approved Make: Dlink/ Netgear/ Cisco

SITC of a fully managed AV over IP network switch of approved makes specifically designed for professional audio-visual applications comprising 24 × 10/100/1000 Mbps RJ45 PoE+ ports (IEEE 802.3at) with minimum 30W per port and a total PoE power budget of 300W, along with 2 × additional Gigabit RJ45 uplink ports and 4 × SFP fiber uplink ports for flexible connectivity; the switch shall support Layer 2 and Layer 3 switching features including VLAN, QoS, Link Aggregation (LAG), IGMP snooping/multicast management, DHCP server, IPv4/IPv6 support, and advanced security features such as DHCP snooping, RADIUS authentication and storm control; the unit shall be optimized for AV over IP applications with built-in IGMP Plus™ for automatic multicast configuration, pre-configured AV profiles for common protocols such as Dante, AES67, NDI, NVX, AMX, Q-SYS and similar systems, and shall provide a dedicated AV-friendly graphical user interface (GUI) in addition to standard IT management interfaces (Web GUI, CLI, SNMP, SSH); the switch shall support high performance with switching capacity of minimum 60 Gbps and forwarding rate of approximately 44.64 Mpps, along with jumbo frame support up to 12 KB and MAC address table size of minimum 16K entries; the device shall include USB ports for management, console interfaces, internal power supply, and support Power over Ethernet distribution for AV endpoints such as encoders and decoders; the unit shall be housed in a 1U rack-mountable chassis with rear-facing ports for clean AV rack integration, low-noise cooling (~34 dB) suitable for control room environments, and shall operate on standard AC power with maximum consumption around 400W under full load; the switch shall be supplied complete with rack mounting accessories, cables, and manufacturer authorization on company letterhead, and shall be suitable for continuous operation in professional AV installations such as auditoriums, command centers and broadcast environments. Approved Make: Dlink/ Netgear/ Cisco

Supply, Installation, Testing & Commissioning of Cables & connectors(Speakers,Audio,Cat x, hdmi etc) for connecting the entire AV equipment of Auditorium, Conference Room & Lobby Make: Falcon/Stecker/Dlink/Digisol/MX/Linetech

SITC of camera wall mount metal stand. It should be constructed with durable material and can be attached right side up or upside down, depending on camera configuration and requirment. OEM accessory will give a perfect fit and features pre-drilled installation hardware and cable holes. Make: Custom

SITC of 42U Floor standing rack with caster wheels. It should have cable entry from top and bottom.Should have front glass door with lock.Should have threeshelf tray.(1U/255mmD),PDU6x5Amp,Fan 90CFM,Mounting hardware(Packet of 10). Make: Prinet/Dynamic/APW president

SITC of professional monitoring headphones with linear sound reproduction, folding and rotating earcupes, frequecy response 10 Hz - 22 KHz or better,max SPL 112 dB or more complete with all accessories Make:Sennheiser/ Shure/ DPA

SITC of tall adjustable microphone stands with tripod base complete with all accessories as required. Make: Ahuja / hercules / i&A stands

SITC of Short stands complete with all accessories as required.Make: Ahuja / hercules / i&A stands

SITC of Active DI Boxes for electronic instruments Powered by +48 V phantom power with a 9 V battery backup Signal levels ranging from +10 to +50 dBu Frequency response from 10 Hz to 90 kHz (±3 dB) Earth Lift Switch.Make: BSS/Behringer/Klark Teknik

SITC of LED PAR light comprising RGBW LED source, beam angle 15°–30°, suitable for side lighting and effect lighting applications, with smooth dimming, DMX512 control, die-cast aluminium housing, and flicker-free operation.Make: ASL/Equivalent

SITC of professional LED Cyc light / asymmetric wall washer designed for uniform illumination of cyclorama, comprising RGBW or RGBA LED source (minimum 150W), wide asymmetric beam distribution for even top/bottom coverage, high color mixing capability, smooth dimming (0–100%), flicke.Make: ASL/Equivalent

SITC of professional moving head light comprising minimum 250W–300W LED source, with motorized pan/tilt, zoom function, color wheel, rotating gobos, prism effects, smooth dimming (0–100%), strobe effects, DMX512 control, multiple operational modes, LCD display, and flicker-free operation suitable for auditorium stage lighting and event applications. Make: ASL/Equivalent

SITC of professional digital lighting control console supporting minimum 512 DMX channels (expandable), control of intelligent fixtures, scene-based programming, minimum 200 scene memory, playback faders, chase functions, dimmer and RGB/RGBW control, intuitive user interface, USB/Ethernet connectivity, backup capability, and standalone operation.Make: Pearl/Equivalent

SITC of DMX splitter with minimum 1 input and 4–8 optically isolated outputs, ensuring signal integrity and protection for lighting network, complete with connectors and termination support.

SITC of dedicated 3-phase lighting distribution panel, fabricated from MS sheet, powder coated, comprising MCCB/MCB protection, phase balancing, individual outgoing circuits for lighting fixtures, RYB indication, voltmeter/ammeter, earthing provision, and suitable for stage lighting load distribution.

SITC of Cable Tray of size 40x75x40mm with 1.6 mm thickness

SITC of Light socket box 4"x4" with 15 Amp multi socket

SITC of C Clamp

SITC of safety chain

SITC of lighting bars fabricated from MS pipe (minimum 40 NB), powder coated black, complete with suspension system, clamps and supports, suitable for mounting lighting fixtures at FOH and stage positions, with adequate load-bearing capacity.

SITC of DMX signal cable (shielded twisted pair) with connectors, termination, testing and commissioning for complete lighting system.

SITC of power cabling for lighting fixtures including connectors, distribution boxes and termination.

SITC of XLR connectors as required

SITC of motorized main stage curtain made of high-quality fire-retardant velvet fabric (minimum 350 GSM) conforming to NFPA 701 / BS 5867 standards, in approved colour, with horizontal traveler arrangement; complete with heavy-duty straight drapery track of open frame design, fabricated from powder-coated steel, supported on suitable brackets; curtain runners with nylon wheels and oil-impregnated bearings for smooth operation; master carriers with steel cable arrangement (minimum 3 mm dia), end stops, pulleys, and track accessories including joining plates, overlap carriers and guides; complete with motorized drive system (minimum 1.5 HP, 3-phase or suitable single phase as per design) with reduction gearbox, limit switches for open/close positions, and control through wall-mounted push button station (open/close/stop) and control panel; curtain shall be double pleated with minimum 900 mm center overlap; complete in all respects including installation, testing and commissioning as per site requirements.Width-44m(approx),Height-8m(Approx)

SITC of main valance made of same fire-retardant fabric as main curtain, stitched in 1:2 pleating, complete with cotton dori, eyelets and mounting arrangement using suitable MS pipe (minimum 25 mm dia) painted black; fixed above proscenium opening to conceal curtain track and lighting fixtures, complete with all accessories and installation as per drawings.Width : approx 22 to 24 m ; height :1.2 m to 1.5 m

SITC of stage border curtains made of fire-retardant black crepe fabric (minimum 280–300 GSM), stitched in 1:2 pleating, complete with mounting arrangement using MS pipes (minimum 25 mm dia) painted black, suitable for installation above stage at multiple levels for masking of lighting fixtures and rigging; complete with all accessories and installation.

SITC of Stage Legs (Side Wing Curtains) made of fire-retardant black velour/crepe fabric (minimum 300 GSM) complying with NFPA 701 / BS 5867, stitched with 1:1.5–1:2 fullness, complete with reinforced header, eyelets, bottom pipe pocket, heavy-duty manual track system with runners, carriers, MS support pipe, clamps, brackets and all accessories; installed in multiple rows on both sides of stage with proper overlap and alignment; complete installation, testing and commissioning as per approved drawings and site conditions.Height: 8.0 m (± site condition);Width per leg: 2.5 m to 3.0 m;Overlap: Minimum 150–300 mm between adjacent legs

SITC of rear blackout curtain made of fire-retardant black fabric (minimum 300 GSM) with horizontal sliding arrangement, complete with heavy-duty drapery track, runners, master carriers, steel cable system, pulleys and accessories similar to main curtain; complete with motorized operation (minimum 1.5 HP motor) with limit switches and control panel; curtain to be double pleated with minimum 900 mm overlap; complete installation, testing and commissioning as per site conditions.

SITC of side ladders (lighting booms) fabricated from MS rectangular tubes (minimum 50 × 25 mm, 16G) welded construction, finished with black powder coating, complete with mounting clamps, base plates and provisions for fixing stage lighting fixtures at multiple heights; complete installation as per stage design.

SITC of stage valance support bar fabricated from MS pipe (minimum 40 NB / 48 OD) in dual barrel configuration, painted black, suitable for supporting front valance and masking curtains, complete with suspension system, clamps and accessories; installed as per approved drawings.

SITC of cyclorama system comprising supply and installation of seamless white cyclorama fabric (matte finish, fire-retardant, minimum 300 GSM) suitable for projection and stage lighting applications, stretched over a rigid MS frame fabricated from MS pipes (minimum 40 mm dia) and MS angles (minimum 35 × 35 × 5 mm), properly anchored to wall/floor with holdfasts; frame to be painted with red oxide primer and black finish paint; fabric to be fixed with uniform tension using suitable fastening system (velcro/dori/track as required); complete installation ensuring wrinkle-free surface for uniform projection and lighting effects.Width- approx 26 m, Height- apporox 6 m

SITC of motor control panel for stage curtain system, fabricated from MS sheet with powder-coated finish, comprising contactors, overload protection, MCB/MCCB, limit switch integration, push button stations (open/close/stop), emergency stop, phase indication (RYB), power indication, internal wiring and terminal blocks; suitable for safe operation of curtain motors and integrated with stage electrical system; complete installation, testing and commissioning.

Supplying, and placing in position of sofa of Durian Make - Berry/55001 as per Image .classic Contemporary design and slender curves. . The Sofa of stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa. Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Leatherette, the sofa makes a fantastic first impression. The Cushioning is moulded such that it flows along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa The seat cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyester poly fill outer layer of 200 gsm. The polyester poly fill keeps the upholstery wrinkle free & soft. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, GREEN PRO / GREEN GUARD Certification, AIOTA Certification, BIFMA Certification, GRIHA Certification and from the approved make of Durian, Godrej, HNI, Rockworth, Haworth, Featherlite, Fabteq, Geeken. The product should be as per above given specification under the guidance of project architect & Engineer in charge. 1 seaterDimension (W)1905mm X (D)890mm X (H)870mm

Supplying, and placing in position of main Table as per Image/ drawing of Fabteq make - FS-711 (Model No.).The Table top made out of 32mm thk prelam particle board with 2mm thk pvc edge banding & side panel & modesty panel made up of 25mm thick pre-laminated particle board .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & central Locking arrangement. The table have a provision of free standing Side Storage of size 1200mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having a provision of 3 drawer unit, one openable shutter with D shape handle & central locking arrangement, one open storage with shelf in it . The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, GREEN PRO / GREEN GUARD Certification, AIOTA Certification, BIFMA Certification, GRIHA Certification and from the approved make of Durian, Godrej, HNI, Rockworth, Haworth, Featherlite, Fabteq, Geeken. The product should be as per above given specification under the guidance of project architect & Engineer in charge.

Providing and fixing 9 " long and 20mm thick and 50 mm depth grouted on the wall MS powder coated lettering for front gate with following lettering " Ustad Bismillah Khan Sangeet Mahavidyalay, Dumraon, Buxar ."