Repair Renovation work Of Saryu Nahar Colony At 15th Cricle Irrigation Works ,Gonda

Amount

Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charges with in a distance of 60 meters(200ft.

DIsmantling cement concrete or brick or granolithic floors including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60 meters.

Dismantling door or window including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60 meters

Dismantling of G.I. sheet Roofing including stacking within 100m.

Dismantling of girder / truss /purlin as per direction of enginer-in- charge including stacking within 100m

Dismantling existing Tiles / Plaster including disposal of refuse as directed by the Engineer-in-charges with in a distance of 60 meters(200ft.)

DIsmantling brick work or stone work in lime or cement mortar including stacking of materials as directed by Engineer-in-charge within a distance of 60 meters.

First class brick work in 1:4 ratio cement and coarse sand mortar

Laying P.C.C. 1:2:4 ( 1Cement, 2 coarse sand, 4 graded stone Balast 10 mm nominal sige )Flooring including supply of material, Labour and T & P etc.

40mm thick 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20 mm nominal size laid in panels with one layer neat cement )

Scrapping old white or colour wash distemper/cement wash/paint including disposal of refuse as directed by the Engineer-in-Charge with in distance of 60 M.

Centering & shuttering for R.C.C work in bulding works

Reinforcement of steel with cutting, bending, binding with binding wire and placing in such a position with all materials, Labour and T &P.

R.c.C work excluding reinforcement , centering & shuttering by manual mixing

Supply and Fixing ISI marked flush door commercial Quality conforming to IS: 2202 Part I (1983) including Fixing of Aluminium cleats & stoppers and including fixing andadjustment of hinges , bolts, locks, handles springs with necessary screw to be supplied departmenlaly with all material, labour T & P sundries etc complete. (a) 35mm thick Single leaf.

12 mm thick plaster in 1:6 cement mortar with sand of F.M. 2.00 including cost of all material lead and lift , labour and T & P etc. per SQM.

S/F Of Virtified Tiles in 500x500mm size (Thickness to specified by manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shade in skirting riser of step over 12mm thick bed of cement mortar 1:3 (1 cement, 3 coarse sand) jointing with gray cement slurry @ 3.3Kg/sqm including grouting the joints with white cement and matching pigments etc complete.

Supplying and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface & Ceiling)

Finishing wall with Premium Acrylic Smooth exterior paint with silicon additives of required shade: New work (Two or more coat applied @ 1.43 ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20Kg/10Sqm) (1st quality Royal, Silk, Asian, Berger)

Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 250 mm x 10mm

Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (b) 200 mm x 10mm

S/F of brass handles with screws etc. complete (a) 125 mm

S/F ISI Marked stainless steel door latches with screws etc. complete 250x20x6 mm

Laying and Fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete with 12 mm mild steel U beading

Painting tow coat of syenthetic enamel Paints on new steel surface with superior quality approved make as after sand preparation and cleaning of surface including cost of all material, labour ,T & P required for proper completion of work in complete.

Painting tow coat of superior quality of Syenthetic enamel Paint approved make as after sand preparation and cleaning on wooden surface ( excluding cost of primary ) including cost of all material, labour ,T & P required for proper completion of work in complete

Fabrication of mild steel/ Iron work in Grill, gates, railing , door and window frames including cutting, drilling, welding, riviting, and hinges wherever necessary & fixing in position including cost of all material, labour and T & P required for proper completion of work with one coat of Red Oxide Primer.

Laying and compacting 12.5 CM thick first class brick rora size 20 MM to 40 MM for item preparation for GSB layers

Supply and fixing of rubber mould Reflective Zig Zag 80 MM thick precast compressed CC interlocking block, compressive strength shall not be less than 30 MPA and weight not less than 5.50 KG each block including 50 MM thick bedding sand and joint filling with sand all material, labour T&P etc. required for proper completion of the work over and including the cost of prepared base of 12.50 CM thick brick ballast as directed by Engineer-in- charge

Supply G.I. Iron Sheet 24 S.W.G. as per specification at site (As per sanction rate)

Laying G.I sheet roofing including cutting, fixing, cost of bitumen ap, washer,rivet, J bolts and nuts etc excluding cost of G.I. sheet

GI metal false ceiling lay in tengular edge global white colour tiles of size 595x595 mm and 0.50 mm thik with 8 mm drop made od G.I sheet having galvanizing of 100 sqm (both side inclusive) and electostatically polyster power coated of thickness 60 microns (minimum) including factory painted after bending.

Supplying and fixing Chlorinated Polyvinyl hloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(20 mm dia)

Scraping of old painted surface including disposal of scraped materials of distance of 30 M and directed by Engineer-in-charge

Supplying laying, spreading and compactin stone aggregates of 22.4-53 mm size to water bound macadam specificatio, n including spreading in unifrom thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, screeing type-B to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per Technical Specification Clause 405 (levelling Coate).

Supplying and applying tack coat with V.G-10 Bitumen using distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Supplying laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 bitumen to required line grade and level to serve as wearing course on a previously prepared base. Including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat of type-c as per Technical Specification Clause 508.

Supplying and laying seal coat sealing the voids in a bituminus surface laid to the speacified levels, grade and cross fall using type-c as per Technical Specification Clause 510.

Supply and fixing of rubber mould Reflective Zig Zag 80 MM thick precast compressed CC interlocking block, compressive strength shall not be less than 30 MPA and weight not less than 5.50 KG each block including 50 MM thick bedding sand and joint filling with sand all material, labour T&P etc. required for proper completion of the work over and including the cost of prepared base of 12.50 CM thick brick ballast as directed by Engineer-in- charge

First class brickwork in 1:4 CM cement and coarse sand for construction of side restraint of CC interlocking

Construction of U type drain, Chamber closed pipe (sec area attched) First class brickwork in 1:4 CM cement and coarse sand for construction of side restraint of CC interlocking

Earth work in excation in foundation

Plaster work 12 MM thick 1:3 cement and coarse sand mortar.

laying cc 1:3:6 in foundation with 4.75-40 mm size crushed stone grit & coarse sand having Fm not less than 2.0 including coast of all material, labour T&P etc. required for proper completion of work.

Shiv Bahadur Pandey

Raghvendra Pratap Singh Contractor