Construction of New Cement Store, Toilet and septic tank along with renovation of office building of Hydel Channel Sub-Division at RD 5500 along SNHC

Amount

Removing doors and windows steel or wood with chowkhats by making recesses in walls when wall is not to be dismantled.

Removing and reinstall windows with chowkhats by making recesses in walls when wall is not to be dismantled.

Dismantling asbestos cement, celotax or other hard board ceiling or partition wall including supporting timber.

Earth work excavation in foundation, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 mtr depth including dressing of bottom and sides of trench, stacking the excavated soil clear from the edge of excavation in subsequent filling around masonry and compaction in 15 cm layers including disposal of all surplus soil as directed with a lead of 30mtr.

Cement concrete 1:4:8 with stone ballast 20mm gauge(ii)mixing by mechanical means using concrete mixer volumetric type.

Filling crushed stone on level including compaction.

Cement Concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type.

First class burnt brick work laid in cement sand mortar mix 1:4 in foundation and plinth.

Damp proof course 2.5cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded.

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 mtr above plinth level.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressummers, lintels.

Cold twisted deformed ribbed/tor steel bars (Fe 500 grade as per IS 1786-2008) for R.C.C works, where rates are not including the complete rates of RCC including bending and placing in position complete.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40 mm gauge and 100mm sand filling using mechanical mixer for mixing of material.

40 mm thick grey polished flooring cement concrete 1:2:4 toping finished with 3mm thick neat coat of cement rubbed and polished using mechanical mixer for mixing of material.

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones) (a) Size 600x600mm.

Providing and fixing Ist quality ceramic glazed wall tiles confirming IS:15622 (thick ness to be specified by the manufactures of approved make in all colors, shades expect burgundy bottle green, black of size 200 x 300 mm as approved by Engineer-in-charge in skirting, risers of steps and dadoes over 12mm thick bed of cement mortar 1:4 (1 cement :4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Water proofing treatment of Roof Slab with High performance cementitious two component product, consisting of a powder component and an acrylic polymer using two coats (Dr Fixit Roof seal flex - Packaging Size: 12 .5 kg (7.5 kg powder + 5 kg polymer) / equivalent water proofing Solution). The slurry thus formed by mixing the two, is to be applied on new roofs to forms a seamless, highly elastic, non-toxic waterproofing layer on the roof with a life expectancy of 7 years. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge.

Corrugated GI sheet roofing 0.80mm thick fixed with galvanized iron J or L hooks 10mm dia., GI Limpot and bitumen washers complete excluding the cost of Purling rafters and trusses.

Providing and fixing 110 mm dia SWR U.P.V.C rain water pipe of 4 kg/sqcm (ring fitted type A) as per IS:4985 including jointing during masonry complete as per specifications and to the entire satisfaction of Engineer-in-charge.

Providing and fixing 110 mm dia. SWR U.P.V.C bend for Rain water Pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer -in-charge.

Cement Concrete 1:2:4 gola 10cmx10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Supplying of pressed steel sheet frames (Chowkats) consisting of 18 gauge(1.25mm) thick steel sheet of the specified section including iron lugs, iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, lock notch provision for receiving tower bolts, and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs concrete Doors and windows frame of size 113mmx60mm with 35 mm wide single rebate weighing 3.38 kg per mtr.

Providing and fixing 14-gauge MS sheet garage doors with 40x40x6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects.

Wire gauge fixed on steel windows of standard rolled steel section, with 3mm thick flat iron cover moulding of 12.5mm width. Fixed with machine screws, complete in all respect.

Kail wood door shutter and windows shutter panelled, glazed and panelled including hinges screens chokes, cleats and cards etc complete fixed in position. 35mm thick

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area.

Providing and fixing M.S. round or square bars at required spacing in wooden frames of windows and clearstory window.

Supplying openable steel windows, of standard rolled steel Z sections, joints mitred and Electrically flash-welded, with iron fittings including necessary iron handles, Peg-stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing ) and finished with two coats of ready mixed paint red lead non setting primer. Up to 1 Sqm area.

Providing & fixing 30mm thick Factory-Made solid Panel PVC Door shutter (Panel thickness 10mm) Consisting of frame made out of M.S tubes of 19-gauge thickness and size of 19mm x 19mm for stiles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the stiles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification ,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.

Cost of aluminium fittings complete for doors windows such as tower bolts handles, stopper and screws etc. for these fittings (excluding sliding belt). For area above 0.50 sqm

Providing and fixing aluminium sliding door bolts ISI marked anodized transparent or dyed to required colour or shade with nuts and screws etc. complete. 250mm x16mm

Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. (a) For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span.

Providing and fixing 5mm thick asbestos sheets ceiling.

12.5 mm thick cement plaster 1:4.

Plastering on underside of ceiling 6mm thick cement plaster 1:3.

White washing (Three coat).

Finishing walls with water soluble exterior paint cement based such as snowecem, robbiacem etc. on old work one coat to give an even shade.

Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats).

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement mortar 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.(b) 100mm internal Diameter H.C.I. gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm

Providing and fixing in position single socket S.W.R. UPVC soil waste or anti-siphonage pipes as per IS:13592 of E.D.C. manufacture or of any other reputed firm including cutting, jointing, wastage but excluding cost of jointing, single socket type-A 110 mm outer dia single socket SWR UPVC pipe lines laid complete.

Bidder Name

Amount in Words

vikrant kumar

Gauri Ram

LEKH RAJ

RAKESH KUMAR

RAKESH KUMAR

LEKH RAJ

vikrant kumar