Dharashiv Caves Dharashiv Dist Dharashiv

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression/ pit if any.

Cutting down trees including trunks and branches with girths above 60cm to 90cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.

Removal of plants / ficus grown by pulling out root system embedded in masnory,cutting stem and application of high/gur/lime formulation as specified by the Architect or other patented chemical biocide treatment such as biocide 'Glycel'(iso proplamine salt of glyphosate) or other chemical as specified by the Engineer incharge etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50m) By Manual Means

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. comple

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing Uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually striking joints on un exposed faces and watering etc.complete.

Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints on the inside when plastering is to be done, watering and scaffolding etc. complete.

Providing and fixing Stone Paving, Second Sort in Cement mortar 1:1½, with size of stone (60 cm. x 45 cm. x 15 cm.), as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be not finely chiseldressed on the surface and the course to be of prescribed width, true for top 25 mm. (1"), the joints running true, the stones to be laid with joints not exceeding 8 mm. (5/16") thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete.

Providing and fixing frame with/without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, ironhold fast of size 300mm x 40mm x 5mm with oil painting, etc. complete.

Providing and fixing single or double leaf panel led door shutter excluding frame with glazed openable fan light shutter 35mm thick as per detailed drawing consisting panelled verticals styles 100mmx35mm and lock and bottom rail 200mmx35mm and panels 12 mm thick both side commercial ply faced particle board including stainless steel fixtures and fastening and T.W.beading at junctions of panel in ser tsandas instructed by the Engineer in charge including 3coats of oil paintina etc. complete

Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79,with 3 rows of 40mm dia. G.I. pipe 30cm a part and fixed in M.S. channels of section 100 x 50 x 6 mm spaced 2.5 C/c 1:2:4 с.с. bedding of size 45 x 30 x 30cm. as per detailed drawing, with 3 coats of approved of yellow and black paint including necessary excavation in any strata.

Providing and fixing mild steel grill gate with angle iron frame 65mmx65mmx10mm with iron barsat 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing oras directed including steel centering. plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic. tarpaulin etc. (Wooden centering willnot be allowed.) With fine aggregate (Crushed sand VSI Grade)

Providing and fixing Stone benches of size 1.80x0.75m with two leg support of thickness 75mm, M20 Conerete-with silu finish with backrest to be placed above the platform edjes lines/periphary etc. Complete in all respects as per the Design & Instructions of the Engineer Incharge including all taxes, transportation charges, loading, unloadning etc, complete. Basic Rate (as per market rate)

Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one Number direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes,conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade

Please Enable Macros to View BoQ information