SPECIAL REPAIRS TO EIGHT QUARTERS FOUR EACH IN BLDG NO 44 45 JCO OR MD ACCN AT TRISHUL LINE UNDER AGE B R N NO II OF GE NORTH SECUNDERABAD

Amount

Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L Rendering 15 mm thick CM (1:4) on fair faces of brick/concrete surfaces using with water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured & paid separately.

M&L Rendering 5 mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 10 mm thick CM (1:6) on surfaces other than fair faces of brick/concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound.

M&L Preparation of the newly plastered surfaces of walls/ceilings & applying two coats oil bound distemper (oil- emulsion) white or tinted over a coat of primer complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with using smart painting tools complete all as specified and directed.

M&L Complete removal of existing treatment and applying two coats of oil bound distemper (oil emulsion) over one coat of primer on walls/ceiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris beyond the premises complete all as specified and as directed.

M & L Non skid ceramic coloured tiles of size 600 x 600 x 8mm to 10 mm, as in floors etc, set and jointed in neat cement slurry and pointed in white or colored cement to match including and over screed bed or beeding layers of mortar 15mm thick in CM (1:6) complete all as specified and directed.

All as per item No.10 above,but as on vertical surfaces such as skirting,dado,etc over and including backing coat of of 10 mm thick in CM (1:3) complete all as specified and directed.

S&F Non skid coloured plain/printed glazed tiles of size 300 x 300 x 6mm to 7 mm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15 mm thick CM (1:6) complete all as specified and directed.

S&F Coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including backing coat of 10 mm thick CM (1:4) complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in padding concrete complete all as specified and directed.

M&L Granite slab work 18-20mm thick in floors steps, cooking platforms and like including pointing in white cement with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM (1:6) including cutting recess opening for the sink portion and embedding complete all as specified and directed by Engineer-in-Charge. Note : No deduction shall be made for opening of sink portion, shall deemed to be included in the quoted rate.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and othersimilar situations,complete all as specified and directed.

M&L Granite (of any type) tiles 18-20mm thick machine cut,in skirting/ dado laid over 10mm thick backing layer in CM (1:4) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M & L Preparation of old painted steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n exc 4.0 Sqm each complete all as specified and directed.

Taking down shutters of any description and in any position exceeding 1 Sqm & not exceeding 2 Sqm each complete all as specified and directed.

S&F 2nd class hard wood factory made glazed and skeleton shutters, 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coats of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 50 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and directed. Note: During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed. Note: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F Factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick PVC lipping all around the edges, fixing in frame at site complete all as specified and directed. Note : All screws shall be self tapping and length of Screw not less than 50 mm.

S&F Providing & fixing of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 5 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work.

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of 33 x 56 mm Box section panelled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work complete all as specified and directed.

S&F in repair Double action spring hinges brass, with phosphor bronze wire spring, bright polished 100mm, complete all as specified and directed.

S&F Telescopic (Hattich) channel for drawer fixed with steel screws complete all as specified and directed.

S & F Continuous (piano) hinges, stainless steel , bright finish or electrogalvanised complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges (medium weight) complete all as specified and directed.

M&L 150mm long stainless steel handles complete all as specified and directed.

S&F 200 mm size stainless steel tower bolt complete all as specified and directed.

S&F 300mm length stainless steel sliding door bolt, dia not less than 12 mm including 6 Nos of bolts with hasp and stapple (bolt type) and fixing clips of sheet complete all as specified and directed.

M & L Preparation of newly wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of prink primer etc complete all as specified and directed.

S&F in repairs 25mm dia Stainless Steel curtain rod incl brackets complete all as specified and diretced

S&F in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia complete all as specified and directed.

S & F in repair vitreous china wash basin, white flat back, size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy type pillar tap 15mm bore quarter turn, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S&F in repairs vitreous china water closet (squatting pan), orissa patern size 580 x 440mm white with integral, foot rests an including 'P' trap and lime bedding making good to floors complete all as specified and directed.

S&F in repairs 15mm dia Bib taps quarter turn, cast copper alloy with chromiun plated crutch or butterfly handle screwed down, for iron pipe or brass ferule complete all as specified and directed.

S & F in repairs 15mm dia angle valves quarter turn, chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions complete all as specified and directed.

S & F in repairs 15mm dia 2-in-1 bib tap with angle valves quarter turn, chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions,complete all as specified and directed.

S&F in repairs shower rose 125 mm dia of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.

S&F in repair health faucet spray type jet with brass jet, chromium plated, and 1.5m long PVC flexible pipe complete all as specified and directed. Make: CERA F8030104AB or equivalent in Hindware/Parryware as approved by GE.

S & F in repairs 15mm size PVC connections with PTMT nuts of length 450 mm complete all as specified and directed.

M&L in repairs 40mm dia Low density poly ethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to wall, ceiling or in floors etc complete all as specified and directed.

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) and stop valves for 20mm bore pipe, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends etc complete including dismantling existing water tank all as specified and directed. Make :-HSWS-0100-01-Pure of M/s Sintex

M&L Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 to ends of landings, steps, cills sunshades, shelves lintels etc complete all as specified and directed.

M&L Cutting holes or through PCC block / RCC wall built in CM and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required, superficial area exc 150 Sqcm but n.exc 400 Sqcm complete all as specified and directed.

M&L in repair for preparing the existing surface by cleaning thoroughly to make it smooth and free from any foreign matter such as fungus, moss, dust etc by wire brushing and dusting followed by 10mm thick rendring in CM 1:4 including water proofing compound and applying a coat of bitumenous primer conforming to IS : 3384 - 1986 @ 0.30 litre / Sqm and then pressing & laying 3mm thick Atactic Polypropylene Polymer (APP) modified prefabricated with non woven polyester reinforcement five layer water proofing membrane weighing not less than 3.50 Kg/ Sqm comprising of centre core of 160 - 170gsm non - woven polyster matt sandwitched on both sides by APP polymer modified bitumen duly protected on both sides by 20 micron HMHDPE film by torch on application with gas welding torch (Butane torch), and thereover applying a tack coat of 85/25 blown grade bitumen conforming to IS : 702 @ 1.20 Kg / Sqm and finish the top surfaces with aluminium paint (Super Silver Shield) @ 0.150 Ltr / Sqm complete all as specified. as per manufacturer's instructions and as directed. Note :- 1. The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative. 2. Water proofing compound measured and paid separately.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) internal dia of pipe in 75 mm set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) internal dia of pipe in 110mm set in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed

S&F 110 mm dia PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed

S&F 75mm dia PVC (SWR) branch piece single (single 'Y') equal or unequal with acess door complete all as specified and directed.

S&F 75mm dia PVC (SWR) branch piece Double (single 'Y') equal or unequal with acess door complete all as specified and directed.

S&F 110mm dia PVC (SWR) branch piece Tee (Single 'T') equal or unequal with acess door complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F for PVC (SWR) reducers 110mm bore complete all as specified and directed.

S&F for PVC (SWR) floor trap long body type, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F for PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

M&L PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in hold fast, cill etc with necessarry form work complete all as specified and directed.

Taking up or down existing unserviceable upvc/ mild steel water tubing and connections 15mm dia, any grade, of any description or in any position including fittings complete all as specified and directed

Taking up or down existing unserviceable upvc/ mild steel water tubing and connections 20mm dia, any grade, of any description or in any position including fittings complete all as specified and directed

S&F 20 mm outer dia Unplasticised PVC SDR 13.5 and plain CPVC SDR 11 fittings pipes fixed complete to walls, ceilings or in floors etc., any type of pipe etc in required length complete all as specified and directed.

S&F 25 mm outer dia Unplasticised PVC SDR 13.5 and plain CPVC SDR 11 fittings pipes fixed complete to walls, ceilings or in floors etc., any type of pipe etc in required length complete all as specified and directed.

M&L Machine cut kota stone slab size as in flooring, stair case landing. treads of steps, 18-22mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed CM (1:6) complete all as specified and directed.

M&L Machine cut kota stone slab size as in skirting, dado, vertical surfaces etc, 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including backing coat 15mm thick CM (1:3) complete all as specified and directed.

S&F Sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 495mmX420mm bowl size 410mmX330mmX160mm complete all as specified and directed.

S&F in repair of PVC cabinet size 650 x 400mm, comprising of looking glass, complete all as specified and directed. Make :- HINDWARE / CERA / NEYCER / PARRYWARE/CLASSIC

Demolition of reinforced cement concrete of any description and in any position including removal of debris beyond the premises complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type D-2 (using 40mm graded stone aggregate) as in as in sub base complete all as specified and directed.

M&L Providing precast cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in CM (1:4) complete with joints to math size complete all as specified and shape as approved by Engr-in-charge.

M&L Sand filling 50 mm thick under floor/ below interlocking paver blocks or in foundations including well ramming complete all as specified and directed.

M&L 60 mm thickness, Machine pressed precast concrete interlocking paver blocks, M-35 grade with grey cement and pigment (glossy finish) any shape and size conforming to IS 15658-2006 complete all as specified and as directed.

Demolition of concrete block masonry built in cement mortar or cement lime mortar including removal of debris beyond the premises complete all as specified and directed.

M&L Brickwork with fly ash bricks (using modular bricks) straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

S & F of Classic Glossy 6 Pin Cloth Hanger for Bathroom Wall Door Hooks For Hanging keys,Clothes Holder Hook Rail 6 as approved by Eng-in-charge complete all as directed.

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F 200mm long SS decorative soft close zero crank hinges, for kitchen cabinet complete all as specified and directed.

S & F in repair 200mm long SS decorative soft close zero crank hinges, for kitchen cabinet complete all as specified and directed.

S&F Rolled sections conforming to Fe 410-W (Gde E- 250) quality A as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Preparation of new or previously untreted steel or iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 15mm dia chromium plated fancy type washing machine taps screwed down,for iron pipe or brass ferule complete all as specified and directed.

S&F in replacement stainless steel plate rack of size 609mm X 609 X 254 mm complete all as specified and directed. Make :Blue star

M&L Providing and applying plaster of paris putty of 1 mm thickness over plastered surface of ceiling /wall to prepare the surface even and smooth complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M & L Point wiring on concealed conduit with 1.5 Sq mm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through including rigid PVC conduit of dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of sutiable thickness covered with suitable modular cover plate including running up of 1.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc for one light/fan/Bell point controlled by one, one way switch 5A, SP complete all as specified and as directed. Note: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor

All as per Item No.100 above but one 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No.100 above but one 3 Pin 5 Amps switch socket Independt board.

All as per Item No.100 here-in-before but using 2.5 Sq mm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Modular switch 1 way 10 A, 1 Module capacity 230 volts complete all as specified and directed.

S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts complete all as specified and directed.

S&F Modular Bell Push 10A, 1 Module complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and directed.

S & F Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and directed.

S & F Calling Bell, AC, 230 volts, single pole complete all as specified and directed.

S & F Ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.

S&F Sheet metal enclosure vertical type MCCB DB TPN 4 way having degree of protection IP 43-IK 09 with metal double door , 415 Volts , flush type made out of 1.2 mm CRCA sheet metal, duly powder coated confirming to IS 8623 with suitable rated bus bar and includes 63 Amps MCCB with breaking capacity 16 KA as incomer and 12 Outgoing SP MCB's with magnetic locking system complete all as specified. Note: MCB SP Shall be measured and paid seperately.

S&F Sheet metal enclosure MCB DB SPN 12 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified and directed.

S&F MCB, Single Pole Neutral (SPN) 40/63 Amps, 415 Volts of rupturing capactiy 10 KA, 'C' Series complete all as specified and as directed.

S&F MCB, Single Pole (SP), 6-32 Amps, 240 volts of rupturing capacity 10 KA, 'C' series complete all as specified and as directed.

S & F in replacement of wall mounted batten type LED light of 12 watts with aluminium extruded batten and system lumens of 1200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and directed. Make: Philips Model BN021 LED12S PSU GR or equivalent model in Havells/Wipro/GE.

S & F in replacement of wall mounted batten type LED light of 20/22 watts with aluminium extruded batten and system lumens of 2200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and directed. Make: Philips Model BN021C LED22S or equivalent model in Havells/Wipro/GE.

S & F in replacement of Security Lights of 25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution with suitable pipe bracket 32 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete complete all as specified and directed. Make: Havells Model ENDURA SUNDOWN SL 25W LED 765 PASY BOPCIHD or equivalent model in Wipro/Philips/GE

M & L Submain wiring with two single core 6 Sqmm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 6 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Three runs of 6 Sqmm cable and one run of conduit shall be measured and paid as one unit length.

M&L Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion complete all as specified and directed. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

S&F Exhaust fan, steel body AC single phase, 230 V of size 300 mm sweep with blades, frame and louvers connecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified. Note: Cutting of hole with the help of machine at wall or fabrication of aluminium frame with glass wall for fixing of exhaust fan shall be inclusive of rate quoted by Contractor.

S&F Exhaust fan, sturdy Engineering plastic body AC single phase, 230 V of size 250 mm sweep with blades, frame and louvers connecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified. Note: Cutting of hole with the help of machine at wall or fabrication of aluminium frame with glass wall for fixing of exhaust fan shall be inclusive of rate quoted by Contractor.

M&L Disconnecting and removing ceiling/exhaust/wall fan of any capactiy any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling,refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan. Note :- (1) Necessary repairs/ replacement of unserviceable parts shall be measured and paid seperately. (2)Labour element for replacing of u/s parts deemed to be included in rate quoted.

M&L Rewinding of the ceiling/exhaust fan complete with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing of ceiling fan of any make and any sweep complete all as specified and directed including taking out burnt copper wire complete all as specified and directed.

S&F in replacement of Ball bearing/Brass bush of Ceiling/Exhaust Fan upto 300mm complete all as specified and directed.

S&F in replacement of 2.5 Mfd Capacitor of Ceiling/Exhaust Fan upto 300mm complete all as specified and directed.

M&L Painting of ceiling fans 48”/56” size complete at site, with super synthetic enamel paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc complete,all as specified and as directed by Engr-in-Charge.

S&F in replacement of Fan Cups of PVC type suitable for 1200/1400mm sweep complete all as specified and directed.

S&F Electric water heater , storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc.alongwith brass check nuts complete all as specified and as directed. Make: Bajaj/AO Smith /Racold

Supply, laying, testing and commissioning of LT XLPE UG cable of size 2 core x 25 sqmm insulated, PVC sheathed and armoured 1100 volts grade with aluminium conductor including necessary end terminal /cable gland as per site requirement in trenches /floors/on wall /service connections including connecting to the main switches /cut outs MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed.

S&F Rigid non-metallic PVC conduit 32 mm exclusive of boxes (junction/terminal) including tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.complete all as specified and directed.

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting exc 10 cm girth but not exc 20 cm complete all as specified and directed by Engineer-in-Charge.

K LAKSHMAN SINGH AND CO (BID ID -3295153)

M/s GM Constructions (BID ID -3298588)

BV SAYANNA SONS (BID ID -3298076)

SKY CONSTRUCTIONS (BID ID -3298083)

SHAH ENTERPRISES (BID ID -3298567)

Venkat Ramaiah (BID ID -3298624)

harshraj and co (BID ID -3293991)