Provn of toilet block near Bldg No P-428 with 02 x WC, 01 x bathroom, 02 x WHB and 01 x urinal and other sanctioned works at Military Station Fazilka

Amount

SCHEDULE 'A' SECTION I (B&R Portion)

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out

Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point and disposal.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete etc.

Formwork to rough finished surface sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in flat.

M&L for RCC M 25 (Design Mix) using 20mm graded crushed stone aggregate as in foundation,ncludings,footing, foundation, beams, plinth beam bases for columns,etc basement slabs mass concrete completed all as specified and directed

Formwork to fair finish surfaces to side of pillars, post, struts, piers, column and stanchions completed all as specified and directed

M&L for RCC M 25 (Design Mix) using 20mm graded crushed stone aggregate as in Column pillars.piers and mass concrete complete all as specified and directed

Formwork to rough finished surface sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for RCC M 25 (Design Mix) using 20mm graded crushed stone aggregate as in beams ,cantilevers bressummers lintels over 1.50m span complete all as specified and directed

Formwork to fair finish surfaces soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Formwork to fairfinish surface edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

M&L for RCC M 25 (Design Mix) using 20mm graded crushed stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for factory made Pre-cast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as block masonary with solid blocks, exc 10 cm in width and setting in CM (1:6) completed all as specified.

S&F 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork ,applying evenly a coat of blown type bitumen at the rate of 1.5kg/per sqm and binding with clean dry sand @ 0.05 cum per sqm, polythene film, 150 micron thick,laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sq.mtr complete all as specified and directed.

M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface all as specified and directed.

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified and directed.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius ,built in CM 1:6 all as specified and directed.

Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in ,built in CM 1:6 all as specified and directed.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L 75 mm thick PCC 1:4:8 type D 2 using 40 mm graded stone aggregate as in sub base.

M&L 25 mm thick 1:2:4 type B 0 using 12.50 mm graded stone aggregate as in floor finishing cement concrete surface even and smooth without using extra cement.

S & F Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with joint free over 15 mm thick cment screed bed 1:4.

S & F.Glazed ceramic tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match to the shade over 10 mm thick cement sand screed (1:3) complete allas specified.

M&L Granite (of any type) tiles 18mm - 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 20mm thick rendering in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L 50 mm thick cement concrete type C1 1:3:6 using 40 mm graded stone aggregate as in plith protection, surface finished even and smooth without using extra cement.

S & F pressed steel door frames 125 x 60 mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc. all as specified.

S & F flush shutters ,35mm thick,solid core construction,with block board core and plywood face panels, commercial type on both sides as per SSR part-I all as specified.

S & F Aluminium, anodised, barrel tower bolts 150mm long of extruded section all as specified and directed.

S&F Aluminium handles 125mm size, cast type, anodised all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixe.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,150 mm fixed in floor all as specified and directed.

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reiforced with M S square tubes, S & F in openining as per specifications & drawing given as in SSR 2009.

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 100 mm long butt hinges extruded alumiunium alloy with galvanised mild steel hinges pin, anodised and fixed.

S & F 150 mm long aluminium anodised barrel tower bolt of extended section and fixed.

S & F 125 mm long aluminium handle cast type anodized.

S&F powder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing etc. completed all as specified.

S&F powder coated aluminum windows and ventilators shutter side hung type without sash, aluminum section weighing glazed clips, rubber packing anodized aluminum fittings such as peg stays 150 mm long (1 nos) hinges type B-21 100 mm long (2 Nos) suitable handle (1 Nos) complete all as specified.

S&F sheet glass not less than 4.8 mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pane

S & F Vitreous china white OVAL wash basin of size 550 x 400 mm including brackets, waste pipe and waste fitting 40 mm brass chromium plated and waste pipe and 15 mm dia PVC connection with brass nuts as in repairs complete all as specified and as directed.

S&F vitreous china squatting pan Orrisa pattern size 580 mm x 440 mm white with intgral foot rest with CI 'P' or 'S' trap and fixing in lime concrete ( 1 lime, 2 sand and 5 aggregate), 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing all as specified.

S & F PVC 10 ltr syphonic action type flushing cistern, loe level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32 mm bore and connection to WC pan complted all as specified.

S & F vitreous china urinal ,bowl type (back or corner wall type),flat back size of 465x355x265mm complete including providing and fixing plugs,bedding urinal agianst wall in cement mortar 1:2,securing urinal to plugs with and including 60mm long brass screws,pointing around urinal back in cement ,fixing automatic flusing cistern with brackets,flush pipe ,grating,water spreader and union for discharge pipe complete all as specified and directed by Engineer - in – Charge.

S & F in repair brass chromium plated central hole basin mixer with regular spout , popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by Engr-in-charge.

S & F brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed. Make : Prayag.Essco and equivalent.

S & F in repairs for brass chromium plated shower rose 200 mm dia round shape with arm including fixing to 15 mm dia steel pipe or union.Make : ESSESS cat part No. RF-105S

S&F 15 mm bore CP angle cock one way chromium plated, high pressure with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified.

S&F 15 mm bib taps, chromium plated fancy type cast copper alloy with crutch or butterfly hand, swrewed down, secrewed for iron pipe or for brass ferrule and fixed.

S&F 20 mm bore stop valve , cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both end of iron pipe or union and fixed all as specified.

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm all as specified.

S&F in repair towel rail 20mm dia, D type 60cm long between flanges brass bran chromium plated. Make -hindware. Esser etc equialant.

S & F soap dish chromium plated brass complete all as specified and directed by Engineer-in-Charge.

Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supplying and laying of CPVC pipes 25mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F 1000 ltr rotetional moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S&F 20 mm float ball valve high pressire of PTMT with epoxy coated aluminium rod & high density platic ball screwed for iron pipe and fixed. ( Min weight 15 mm - 142 gms/20 mm 210 gms/25 mm 455gms/40mm 690 gms)

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with acces door

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F 75mm PVC (SWR) vent cowl

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:6) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

M& L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth ( wihout using Extra cement) as in vertical surface.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with 2 % water proofing compound finished even and smooth ( wihout using Extra cement) as in vertical surface.

M&L Rendering 10 mm thick on ceiling Surface in CM 1:3 .

Supply only liqid water proofing compound.

M& L Preparaion plastered or unplasterd surfaces and applying 3 coat of white wash on vertical surfaces of walls , and the like completed all as specified.

M& L two coatof oil bound distemper on Preparaion plastered or unplasterd surfaces over a coat of alkali resistance primer on vertical surfaces of walls , and the like completed all as specified.

M& L Preparaion plastered or unplasterd surfaces and applying three coat of white wash on ceiling, soffits of slab,beams and like completed all as specified.

M& L preparation surface of wood and wood based surface new on any description not other wise described over 10 cm grith and applying two coat of synthetic enamel paint over a coat of pink primer.

M&L 25 mm thick cement concrete flooring type B0 1:2:4 using 12.5mm graded aggregate on roof slab.

Preparation of roof top surfaces, providing and applying UV stable single components smart care damp proof ultra is a fiber reinforcement elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibers and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio of damp proof and water 3:1 and coverage @ 1 ltr/10sqm with a thickness of 650 micron. Note :- 6 Hrs interval between two coats will be maintain & the work will be carried out through company applicator duly got approved from accepting officer in writing before incorporation and paid only after receiving of the warranty certificate from the company . Make :- Asian paint or equivalent as approved by GE

Surface excavation not exc 30 cm deep and average 15 cm in soft/loose soil and getting out all as specified and directed by Engineer-in-Charge.

Material and labour DWCPE pipe 150 mm dia ( 160 mm OD) completed laid in trenches including earthwork, removal and return filling and jointed including testing alongwith necessary jointing material tees/union/socket etc complete laid on PCC bed 150mm thick PCC in 1:3 type C2 of avg depth 0.90 to 1.65 m depth incuding packing under and haunching against the side of pipes after they are laid and tested all as specified in IS 16098:2013 and as directed.

Spreading & levelling in layers n exc. 25 cm thick & well ramming incl. watering as required

M&L RCC M-25 design mix using 20 mm graded aggregate in chajjas ,shelves and the like

M&L continuous brick edging, with burnt clay bricks of sub class ‘B’ (old size) with width equal to the depth of the brick laid dry on end vertically including sand cushioning & filling interstices with sand (Tibba sand) complete all as specified.

Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified .

S & F galvanised mild steel wire cloth, 0.51 mm to 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanised wire staples,fixed in repairs all as specified .

S & F 150mm Extruded aluminium alloy handles, fabricated all as specified.

S & F Alum anodized barrel tower bolt of extended section and fixed 200 mm long.

S & F in repair MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F i steel window 1.25 mm thick box type (primer coated) ERW hollow "P" section of size 60mm x 25mm single rebated comprises guaged and glazed skeleton shutter ERW section 50mm x20mm and 1mm thick with two openable leaf consisting two no. of sash bars of flat iron 12mm x 3mm complete welded to frame and all description as directed by Engg-in -charge

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complet

S&F Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars & similar work conforming to Fe 410-0 or Fe 310-0

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome

M & L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbingand polishing complete including 15 mm thick sceeed bed or bedding in CM 1:4

S&F CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity

S&F 110mm PVC (SWR) 'P’ trap

M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4)

M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extgra cement including forms, moulds mitred/stopped ends etc.

Providing & laying On site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10user

Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 3M dia X 3.0M effective deepth including removing excavated soil n exc. 150m & depositing where directed at a level n exc. 1.5 m above the starting point all as directed by Engineer- in - Charge.

SCHEDULE 'A' SECTION-II (E&M PORTION)

M&L point wiring with PVC FRLS multi strandard copper conductor unsheathed cable of size 1.5 sqmm by using PVC FRLS copper conductor unsheathed cable of size 1.5 sqmm(for earthing connections to common earth dolly/earth lugs in MS sunken box/switch board) drawning in concealed conduits 20/25mm dia with all arrangements & PVC accessories as required to site requirement inlcuding fixing of switch board with new machine brass screw & washers complete all as specified & directed. Note :- 1. Colour code of Phase cable is Red,Yellow and Blue . (2) colour code of Neutral is BLACK. (3) Colour code of Earth wire is GREEN. (a) One light/Fan point controlled by one, one way switch 5/6 Amp

M&L switch piano flush type one way 5 amp, 230V.

M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified.

S&F switch Piano type single pole one way 15 Amp on laminated sheet top cover complete to all as spd (Sheet top cover incl in point wiring) .

S&F socket Pinao type 6 Pin 16 amp,230 VAC .

M&L ceiling rose 3 treminals/ PVC polycarbonate isolated body size(65x50)mm surface type, 230V.

Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, .Make: Havells/Anchor/Legrand

Suppy and fixing Exhaust fan metalic body heavy duty of size 300 mm sweep with louver shutter 220V, single phase AC including 1.0sqmm copper flexible cable twiested three core alongwith flelxible PVC condiut from ceiling rose to fitting testing complete all as specified and directed including cutting holes thruogh cement mortor wall for fixing 300mm sweep exhaust fan grouting the bolts, plastering and making good surface internally and externally wth existing colour.Make:Cromption/Havells/Bajaj

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater, storage type steel body with heating element 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as angle cock, hot and cold pvc pipe, 15 Amps Plug top complete all as specified and directed by Engr-in-Charge.

S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 4 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed..

M&L MCB SPN 20 Amp,440 Volt complete all as specified.

M&L MCB SP 6-32A,240 Volt as in replacement complete all as specified.

M&L sub main wiring of PVC FRLS insulated unsheathed four core 10 sqmm copper multi stranded conductor including one run of two core copper conductor of size 10.0 sqmm as earth wire drawing in concealed PVC conduit complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .

M & L for sand cushioning with dry coarse sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable all as specified and directed by Engineer-in-Charge.

Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 25 mm dia bore.

Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 20 mm dia bore.

S & F stop valve size 20 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.

All as per Srl item No. 1 here-in-before but one three pin socket outlet 5 Amps on the independent board complete all as specified.

S&F socket two in one ,3 Pin 5 Amps 230 VAC supply, .

M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.Make: Havells/Anchor/Legrand

S&F of Ceiling fan of 1200mm sweep mounted in suitable arrangement for operation on 230 volts, single phase, 50 cycle per second, AC supply with electonic type regulator and connecting accessories BEE 5 Star rating and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable from ceiling rose to fan fixing in ceiling complete and making the surface good after fixing the fan complete all as specified and directed. MAKE : BAJAJ/HAVELLS/CROMPTON

M & L for Sub main wiring with 2 single core 6 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 6 Sqmm single core copper earth wire complete all as specified. (Note:- Three lengths of 6 sqmm cable and will be measured as one length).

Supply installation, commisioning and testing solar water heater system storage type having capacity 400 ltr per day including solar panel, collector, absorber and other required accessories including hot water stainless steel storage tank 400 ltr capacity to be placed ON roof at a hight of 3 Mtr aluminium cladding, angle iron structure, cold water tank of capacity 1000 ltr (HDPE Double layer) with inter connection between tank and solar panel and necessary masonary work, concrete etc shall be done as per manufacturer instruction including electric backup 3KW heating element with thermostate, electric connection with Sub main from solar panel to MCB DB and other safety devices such as thermostste, necessary PCC work complete all as per manufactures instructions

Supply and fixing GI tubing of size 20mm medium grade ISI marked including all fitting and fixed complete to wall/floor etc all as specified and directed by Engr-in-Charge

Supply and fixing GI tubing of size 15mm medium grade ISI marked including all fitting and fixed complete to wall/floor etc all as specified and directed by Engr-in-Charge

Supply and fixing hot water pipe duly insulated with glass wool and aluminium cladding 20 mm complete to wall/floor etc all as specified and directed by Engr-in-Charge

M&L Gun metal globe or gate valve 20 mm dia with iron wheel head screwed bolts ends for iron pipes and fixed complete all as specified.

M&L Gun metal globe or gate valve 15 mm dia with iron wheel head screwed bolts ends for iron pipes and fixed complete all as specified.

M & L for bib taps of size 15mm , chromium plated, fancy type with crutch or butter fly handle , screwed down, screw for iron pipe or for brass complete all as specified.

M& L for ball brass valves suitable for 20mm dia pipe high pressure with polythyne floate and nut complete.

M&L sub main wiring as of PVC FRLS insulated unsheathed two single core 6.00 sqmm copper multi stranded conductor including one run of single core copper conductor of size 6.0 sqmm as earth wire drawing in concealed PVC conduit after chasing in wall and making good the disturbud surfaces with existing colour complete all as specified and directed.

M&L MCB SPN SPN 63 A, 240 Volt Complete all as spd.

M & L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping of poles all as specified and directed by Engineer - in - Charge .

M &L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A 240 Volt all as specified and directed

Supply and fixing storage type water heater of capacity 25 Ltrs complete groutig nuts, bolts and making good the disturbed surface, complete all as specified.Make: Havells/CG/Venus

Supply and fixing storage type water heater of capacity 50 Ltrs complete groutig nuts, bolts and making good the disturbed surface, complete all as specified.Make: Havells/CG/Venus

S& F Hot water PVC pipe 15 mm dia 450 mm long suitable for Gyser all as specified.

S& F Cold water PVC pipe 15 mm dia 450 mm long suitable for Gyser all as specified.

M&L sub main wiring of PVC FRLS insulated unsheathed two single core 4 sqmm copper multi stranded conductor including one run of single core copper conductor of size 4 sqmm as earth wire drawing into concealed PVC conduit complete all as specified and directed.Make:Havells/Finolex/HPL

BiBib taps 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .

M/s GURFATEH BUILDERS