SITC of 50 KvA voltage stabilizer and other electrical works at various WSS of Mech. Rural Sub-Division Peripheral

Amount

WSS Narbal Providing, Installation, Testing and Commissioning of Fully automatic Star-Delta Submersible Motor Starter with thermal Relay Range 36-60 Amp. The starter shall be sheet enclosure type suitable for operating on 3 – phase, 415 V, 50 Hz AC Power Supply. The starter shall be able to provide single phase, phase reversal, phase imbalance and overload protection to the motor. The starter shall also consist the On/OFF, voltage and current indication meters & minor wiring of starter is also included in the job.

Providing installation testing and commissioning of area lighting 120 Watt LED (Street Light Type) Input: 90-240 V, 50 Hz Power Factor: >0.9 Colour Temperature: 4K - 6.5K Beam Angle: 120˚ - 170˚ Lumens: >12000 Operating Temperature: -20˚C to 60˚C The LED shall have pressure die cast aluminum housing with power coated finish and having Ingress Protection up to IP-68. The LED shall be properly fitted on the arm of the pole and connected to the copper wire as provided in item no A The job also includes Supply, Installation, Testing & Commissioning of DP, MCB (02 No’s) of required size enclosed in steel enclosure including cost of 2Cx10 mm² XLPE Aluminum Armoured Cable Aluminum cable , cable glands etc.

WSS Nendwanpora Providing and fitting of LT Distribution box for 63 KVA H.T transformer with 200 Amp 4 pole heavy duty MCCB Switch with following Specifications. Rated Current = 200 A Thermal release range (A) = 160-200 No. of Poles. = 4 Pole Volts = 415 VAC FRQ. = 50 Hz Breaking capacity = 36 KA Qty. = 1 no, The job includes Providing, fitting, testing and commissioning Aluminum, 70 Sq.mm 3.5 core, PVC sheathed Heavy Duty of armored LT industrial grade power cable (15 mtrs) from HT transformer to the main control panel as service mains. The conductor to be laid in air/ underground as per site requirement. The job also includes providing, fitting, crimping and taping suitable amperage Aluminum thimbles at the ends of the conductor. The job includes making a suitable hole in the wall for passing the above laid aluminum conductors as per the site requirement.

M/S RELIANCE ELECTRICALS

M/S WASEEM TRADERS

Competent Engineering Works