Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC FLAT NO A 15 ARCHANA GREEN SOCIETY NIBM ROAD KONDHWA PUNE 411048 | PUNE | MAHARASHTRA | 411048 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹30.4 L+₹1.5 L (5.33%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹31.3 L+₹2.5 L (8.51%)Rejected-Finance 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹32.4 L+₹3.5 L (12.3%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹33.2 L+₹4.3 L (15.1%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
8 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 19 OF 2023-2024REPAIRS TO ROOF, PLASTER, CEILING AND CERTAIN MISC B/R WORKS IN SFC, KOHIMA LINE AND CERTAIN AREA OF AGE B/R (CENTRAL) UNDER GE (N) PUNE
2023_MES_604258_1
GE (N) P/TOKEN- 19 OF 2023-2024
Open Tender
Civil Works
Item Rate
270 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹90,000
Yes
8 Sept 2023
19 Jun 2023
15 Jul 2023
19 Jun 2023
8 Jul 2023
3 Jul 2023
20 Jun 2023 - 27 Jun 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.
Material and labour for double charge coloured vitrified tiles 8 to 10mm thick (square/rectangular) of colour and pattern as approved by GE, polished, area of each tile exc. 0.18Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
Material and labour for coloured non skid ceramic tiles of size 300mm x 300mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.
M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mm thick cement mortar 1:4 complete all as specified and directed.
M&L for Glazed coloured ceramic tiles in vertical surface 300mmx200mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including backing coat of 10 mm thick in cement mortar 1:3 complete all as specified and directed.
M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified & directed.
M&L for coloured glazed ceramic highlighter tile of size 600mm x 300mm x 7 to 8mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar 1:3 etc complete all as specified & as directed.
M&L for coloured glazed ceramic tiles of size 450mm x 350/300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified & directed.
M&L for coloured glazed ceramic highlighter tile of size 450mm x 350/300mm x 7 to 8mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar 1:3 etc complete all as specified & as directed.
M&L for double charged vitrified ceremic tiles 8 to 10 mm thick wooden texture size- 200 X 1200 mm, plank type laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade complete all as specified and directed.
Material and labour for coloured, glazed ceramic cladding tiles, of size 600mm x 300mm x 8 to 10mm thick as in vertical surface/ in cladding, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.
M&L 25 mm thick plain cement concrete (1:2:4), type B-O (using 12.5mm graded stone aggregate) as in sub base including demolition of existing cement concrete complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and rubbish off the premises complete all as directed
Material and labour 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.
M&L for 25mm thick coloured glossy rubber moulded chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
Dismantling of stone slabs,cudappah of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified.
M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed of CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.
M&L for Machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed.
M&L 40mm thick cement concrete 1:2:4 Type B1 (20mm Graded Stone Aggregate) , as in Floors, court yard etc., and finishing the Cement Concrete Surfaces Even and Smooth with using Extra Cement, complete including demolition existing concrete all as specified and as directed.
Supply and fix for glass dividing strips 3mm thick and 38mm width, inserted in position conform to design complete all as specified and as directed.
M&L for cement concrete 1:3:6 Type C-2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cement including demolition existing concrete and rubbish off the premises complete all as specified
M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar complete all as specified and directed.
Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces with sagol finish all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer as specified and directed.
M&L for preparation of new plastered or unplastered wall surfaces and applying two coats of acrylic distemper over a coat of primer as specified and directed.
Material and labour for removing of plants, bushes, weeds with roots from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , waste water pipe, bends and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to height of 15 metres vertical slopes)
M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces to receive new finish complete all as specified and directed.
M&L for complete removal of existing treatment on ceiling using steel wire brush, sanding machine, rubbing emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces to receive new finish complete all as specified and directed.
M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces complete all as specified and directed.
M&L for applying wall care putty 1 to 1.5 mm thick on celing surfaces complete all as specified and directed.
M&L for applying one coat of alkali resistant priming paint on wall complete all as specified and directed.
M&L for applying one coat of alkali resistant priming paint on celing complete all as specified and directed.
M&L for two coats of acrylic distemper of approved tint on wall surfaces complete all as specified and directed.
M&L for two coats of acrylic distemper of approved tint on ceiling surfaces complete all as specified and directed.
Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.
M&L for subsequent coat of acrcylic distemper complete all as specified and as directed.
Preparation of old treated plastered/ false ceiling surface of ceiling by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.
Material and labour for preparation of old surfaces of walls and applying two coats of white wash complete all as specified and as directed.
Material and labour for preparation of old treated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old traeted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of new untreated wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old treated surfaces of wood and wood based material/ asbestos surface of any description in ceiling etc over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old treated plastered or unplastered wall surfaces and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of old treated plastered or unplastered wall surfaces and applying two coats of cement base paint as specified and directed.
Material and labour for preparation of old treated plastered or unplastered/ concrete surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of plastic emulsion paint complete all as specified and as directed.
Preparation of old treated surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of luster paint complete all as specified and as directed.
Preparation of old treated surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coat of luster paint complete all as specified and as directed.
M&L for preparing the old treated wooden surfaces of any description including cleaning and applying a coat of wood filler and one or more coats of french polishing till the desired finish is obtained complete all as specified and directed.
Material and labour for scrapping out old treated wooden surfaces in floors, staircase etc ,sanding the surfaces using sanding machine, application of pigment and hardener of desired colour and finally applying two or more coats of melamine polish with spray guns, compressor etc complete till desired (Glossy/Matt) surface is obtained complete all as specified and as directed.
- Ditto- all as per serial item No.55 here-in-before but as in wooden doors, window and wall paneling.
Material and labour for preparation of old decorated surfaces of Mangalore Tiles, Roof, Parapets etc at Height not Exc 15m and applying one coat of 100% Acrylic exterior emulsion paint complete all as specified and as directed.
Dismantling asbestos/ Galvalume/ fibre sheet cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and as directed.
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.
Material and labour for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.
Material and labour in repair for 6mm thick asbestos cement, two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc including taking down existing ridge complete all as specified and as directed.
Dismantling of structural steel work of any description including doors, gates, framed trusses etc. complete all as specified and as directed.
Supply and fix mild steel work in tubular trusses, beams, rafters, purlins, main columns, posts etc., for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.
Supply and fix rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.
M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.
Supply and fix rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed.
M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of Red Oxide Primer complete all as specified and as directed.
Supply and fix 1.00mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified anda as directed.
S&F in repairs chromium plated two way bib cock quarter turn with wall flange 15mm dia Cat No. QQT 7041 of make Jaquar ‘QUEEN'S series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repairs chromium plated fittings angular stop cock quarter turn with wall flange 15mm dia Cat No. QQT 7053 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repairs chromium plated pillar cock quarter turn, Cat No. QQT-7011 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repairs chromium plated single towel rail 600mm long including built in side brackets ,Cat No. AQN-7711 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repairs chromium plated toilet paper holder ,Cat No. AQN-7751 of make Jaquar ‘‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repairs chromium plated soap dish ,Cat No. AQN-7731 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repairs chromium plated towel ring round, Cat No. AQN-7721 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repairs chromium plated wall mixer system with provision for both hand shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs ,Cat No. QQT-7281 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repairs chromium plated towel rack, 600mm long with lower hangers, Cat No. AQN-7781 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repair 5 mm thick float glass looking mirror with stainless steel wall brackets complete all as specified and as directed.
Supply and fix in repair brass chromium plated mixer for mixing hot and cold water screwed down high pressure for iron pipe of 15mm bore complete all as specified and as directed.
S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion ' series or of equivalent make as per Appx 'A' as approved by GE.
S&F in reapir 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.
Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as specified and as directed.
Supply and fix 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.
Supply and fix 20 mm bore GI tubing 'medium grade' galvanised, with all fittings laid in trenches complete all as specified and as directed.
Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning for refixing complete all as specified and as directed.
Fixing only 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning for refixing complete all as specified and as directed.
Supply and fix 25mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down existing tubing complete all as specified and as directed.
Supply and fix in repair for 25mm bore dia gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
Supply and fix in repairs for vitreous china wash hand basin, white, size 550 mm x 400 mm flat back excluding taps but including CI brackets, chromium plated brass waste coupling, chain and plug, waste fittings, union and PVC waste pipe 32mm dia, of required length, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.
Supply and fix in repair for brass mortice lock, vertical type, size 100mm of 4 levers with duplicate key complete all as specified and as directed.
Supply and fix in repairs vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.
Supply and fix in repairs for vitreous china, squatting pan of 'Orissa' pattern, size 580 mm x 440 mm, white, with PVC 'P' of 'S' Trap, front or back inlet and integral foot rests any pattern, including provision of lime concrete bedding including connection to trap and to flushing pipe, antisyphonage pipe including 32mm dia PVC flush pipe etc. and making good to the floor complete all as specified and as directed.
Material and labour for 08 to 10mm thick PVC laminated false ceiling board of size 600 mm x 600 mm on and including GI powder coated grid work with using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). Note: Height of ceiling is above 5 metres.
Material and labour in repair for false ceiling with Single layer of size 1800mm x 1200mm x 12.5mm thick, tapered edge gypsum board (Gypboard) Plain (conforming to IS 2095-Part 1:2011, Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc Joint Paper tape fixed on and including metal grid of hot dipped galvanized steel sections and suspended as per manufacturer's specifications and instructions including dismantling of existing complete all as specified and as directed. Make: Gyproc-Saint Gobain or equivalent of Armstrong, Diaken, New Age (ACE) as approved by GE.
M&L for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sqcm and not exceeding 25 Sq cm and fixed in decorative pattern including preparation of surfaces and applying two coats of acrylic distemper over a coat of primer matching with the colour of ceiling complete including dismantling of existing all as specified and as directed.
Supply and fix in repair for polycarbonate fibre glass reinforced translucent corrugated/ Plain sheeting 6.00 mm thick hollow section fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.
Supply and fix in repair for brackets for drapery/ curtain rod, decorative type, of stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed.
Supply and fix in repair drapery/ curtain rod of 25mm dia, decorative type, of stainless steel complete all as specified and as directed.
Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and complete all as specified and directed.
Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and complete all as specified and directed.
Material and labour for 6mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.
Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.
Material and labour for Second class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 3 Sq.cm but not exc. 6 Sq.cm complete all as specified and as directed.
Material and labour for Second class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 6 Sq.cm but not exc. 13 Sq.cm complete all as specified and as directed.
Material and labour for Second class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 13 Sq.cm but not exc. 25 Sq.cm complete all as specified and as directed.
S&F stainless steel auto close/ hydraulic hinge suitable for shutter of not exc 0.50 sqm area complete all as specified and as directed. Make Prayag Cat No. 5120 or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repair stainless steel hinge 50 mm long for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.
S&F 75 mm long stainless steel handles for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.
S&F in repairs chromium plated sink cock with regular swinging spout (wall mounted model) with wall flange complete all as specified and as directed. Make: Jaquar Cat part No ARI 39347S or equivalent of make as per Appx 'A' as approved by GE
Supply and fix in repairs, chromium plated single lever extended basin mixer (height 85mm) without popup waste system with 450mm long braided hoses as per Cat No.FUS-29023B of make Jaquar ‘FUSION ' series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
Supply and fix in repair for hand shower, chromium plated (health faucet) of ABC body with 8mm dia 1.2 metres long spirochrome flex tube and wall hook all as per Cat No. ALD-587 of make Jaquar or equivalent as approved by GE complete all as specified and as directed.
Supply and fix in repairs for brass chromium plated soap dish holder complete all as specified and as directed. Make: Jaquar Cat No. AKP-35731P of make 'Contonental series' or equivalent of make as per Appx 'A' as approved by GE
Supply and fix in repairs for overhead shower 150X150mm square shape (body and face plate stainless steel with chrome finish) with shower arm with rubit cleaning system, complete all as specified and as directed. Make: Jaquar Cat No.OHS CHR -1605 or equivalent of makes as per Appx 'A' as approved by GE
Material and labour in repair for 4mm thick one side decorative group match veneer plywood and application of resin pigment and hardener to desired colour and pattern and applying two or more coats of melamine polish with spray guns, compressor etc till the desired glossy surface is obtained complete all as specified and as directed.
Taking down door shutter of any description, area exc.1sqm and not exc. 2 sqm each and refixing in same opening after making necessary repair/ easing complete all as specified and as directed. ( Note :- Builders hardware used in repairs shall to measured and paid separately)
Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and as directed.
Taking down shutters of any description, area exc.2sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed
Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and as directed.
Supply and fix 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed
Supply and fix 35mm thick Second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.
Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed
S&F factory made 100% solid wood plastic composite (WPC) 28 to 30 mm thick board as in door shutter complete all as specified and directed. Make: Rajshri/ Sintex/Duraplast/Accucell
Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.
S&F Second class hardwood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including taking down chowkats/frames and 02 coats of synthetic enamel paint over a coat of pink primer o two sides of chowkats and one coat of black bituminious paint on one side of chowkats complete.
S&F factory made 100% solid wood polymer composite (WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed.NOTE: During fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. Make: Rajshri/ Sintex/Duraplast/Accucell
Supply and fix 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.
Supply and fix 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
Supply and fix in reapirs 150 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
Supply and fix butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.
Supply and fix 75mm size butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed type D-11 complete all as specified and as directed.
Supply and fix in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.
Supply and fix in repairs for 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.
Supply and fix 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
S&F in repairs Stainless steel utensil racks for modular kitchen including latches, magnetic hinges, handles and all necessary fittings required for modular kitchen, all as specified and directed by Engineer-in- Charge, Consisting Following components:- (a) Cup plate rack made of 3mm dia stainless steel wire (b) Meal Plate Rack made of 3mm dia stainless steel wire (c) Catlery Basket made of 3mm dia stainless steel wire (d) Bottle Basket Plate Rack made of 3mm dia stainless steel wire (e) stainless steel hinges 19mm long L type (f) Stainless steel hinges 12mm L type (g) Stainless steel hinges 6mm long L type. Notes:- (1) Weight of each unit shall be assessed at site (2) PVC parts/ shutters shall be measured and paid separately under Item No 138 Below
S&F Drawer Sliding channel fixed with screw and fittings fixture of 450mm long all as specified and as directed.
S&F shelves made of HDHMR (high density high moisture resistance ) board manufactured with hard wood, prelaminated both sides white in colour 18mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make- Action Tesa, Century, Kitply
S&F in repairs rainwater gutter system of SWR pipe 180mm nominal dia. Half round type alongwith all accessories/ fittings, heads, shoes, bends, swan-necks, etc.complete all as specified and as dircted. Make- Prince Model HPR18R or equivalent of Infra, supreme, Kisan, Astron Plastic, Amogh Plast, Finolex. (Height of Bldg is 15m)
-- ditto-- as per sl item no 140 but except pipe
S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls, including all fittings,heads, shoes, bends, swan-necks, etc., overall as fixed along along the centre line over fittings and accessories)
S&F in repairs PVC (SWR) bends of any radius with oval and access door of 110 mm dia complete all as specified and directed.
M&L AC Eves/Weather Boarding of AC Sheet 12 to 15mm thick, complete any size and shape including dismantling of existing all as specified and as directed. Make: Shera wall/Everest/ V-board/Charminar or Eqvt.
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
SAGAR ENTERPRISES
Sai Construction
M/S AKASH ENTERPRISES
K.S.JITE AND SONS
M/s Akshay Contruction
VIRENDRA FABRICATORS
ANIL CONSTRUCTION CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .