REPAIR TO JOINERY WORK, WALLING, RENDERING, FLOORING, ROOFING, TOILETRY AND OTHER MISC WORKS OF BLDGS UNDER AGE B/R (EAST) AREA AT GE DEHU ROAD

Amount

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store. complete all as specified and directed.

All as per item no 1 but n'exc 1.5 Sqm each. complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid. complete all as specified and directed.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specified and directed.

M&L for false ceiling with 10mm thick of panel size 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface and applying two coats of oil bound distemper over a coat of primer all as specified and as directed.Make: Gyproc or Equivalent

M and L for 10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge.

Supply and fix in repair for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 30 mm thick factory made solid panel PVC door shutter ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. complete all as specified and directed.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm. Complete all as specified and as directed.

S & F for 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

S & F 35 mm thick factory made glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified and as directed.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.complete all as specified and as directed.

Supply and fixing three track sliding window including frame with two shutters with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc; fabricated using following aluminium anodised sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engineer-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. (Note:- Cost of Tinted glass & wire cloth shall be included in the quoted rate of the item).

M & L in repairs 12 mm thick MDF board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed.

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples complete all as specified and directed.

S&F 3.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.Complete all as specified and as directed.

S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and as directed.

S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and as directed.

S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and as directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and as directed.

S&F 100 mm MS, Butt hinges,medium weight cold rolled fixed with screw or welding complete all as specified and as directed.

S&F 125 mm MS, Butt hinges,medium weight cold rolled fixed with screw or welding complete all as specified and as directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

M&L for rendering 15 mm thick in CM 1:4 on old fair faces of brick work or concrete surface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge.

M&L for rendering 15 mm thick in CM 1:6 on new fair faces of brick work or concrete surface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls. all as specified and as directed by Engr-in-charge

M & L for Complete removal of existing treatment of surface finish on wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with wall care putty (3 mm thick) and applying one coat of primer with two coat of oil bound distemper complete all as specified.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level) complete all as specified and directed.

M & L 75 mm thk Cement concrete (1:3:6) type C-2, (40 mm gr agg) as in plinth protection finished even and fair complete all as specified and as directed.

M & L 75 mm thick PCC type D2 1:4:8 (40 mm Gr. Agg ) as in sub base complete all as specified.and as directed.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55 mm to 60 mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm thick set and jointed in cement slurry and pointed in neat grey cement & reflective coloured over screed bed 15 mm thk in cm 1:6 .complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and as directed.

M&L for 40 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in floor,finished rough to receive tiles etc,complete all as specified.

M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

Material and labour for 20 mm thick granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, rounding to edges of granite stone etc.complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as specified and directed.

M&L for 25 mm thick plain cement concrete (1:2:4) type B-1 using (20 mm graded stone aggregate) as in Sub base for leveling ,complete all as specified and directed.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L for vitrified coloured tiles 8 to 10 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and directed.

All as per item No 47 but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and directed.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & including backing coat 10mm thick in CM 1:4 complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to over & including 10mm thick screed bed in 15mm thick Screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.

All as per item No 50 but on skirting over 10 mm th rendering in CM 1:4 complete.

S&F, in repair 18/19 mm thick MDF board, exterior grade pre laminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinet or fixed with screws to timber frame work, complete all as specified and as directed.

Dismantling Plain or corrugated steel (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for .complete all as specified and directed.

S&F Tubular Sections, Angle sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified and as directed.

S&F Roof truss framed trussed etc incl distance piece , cleats with necessery welding works etc Fe 410-W ( gde E-250)Quality A

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc. complete all as specified and directed.

S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete all as specified and directed.

All as per item No 58 above above but plain sheet fix in valley gutter / ridge/ view cutter complete all as specified and directed.

M & L for Rendering 10 mm thick in cement mortar 1:4 using water proofing compound @ 3% of weight of cement on RCC roof slab, finished even & smooth without using extra cement as directed by Engineer-in-charge

M&L for 40 mm thick cement conceret 1:2:4 type B-1, (20mm graded aggregate) as in surface channel & floor finish .complete all as specified and as directed.

M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction. (c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint. (d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note:-Obtain material through out low laying Area

M & L for Providing and carrying out water Proofing treatment to toilet, sunkan slabs, wet areas etc, after applying 15mm thick cement plaster in cm (1:4) complete and proper surface prepration, carry out cementitious ingection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete all tools and plant as per manufacturers specification paint complete all as specified and directed by engr-in-charge.

M &L for two coat of synthetic enamel paint over a coat of red oxide primer, including preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.

M & L for plain cement concrete (using 40 mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and directed.

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F External teak wood lipping 6 mm thick for 18 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed.

S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30mm width of flaps complete all as specified and directed.

S&F 40 mm dia, mild steel bright finished cup board knobs fixed with nut, screw and washer complete all as spd and as directed.

S&F, Ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in complete all as specified and as directed.

M & L Framed work as in doors or gates of angle or other section, hollow section with gusset plates, rail, braces, etcof Fe 290 Gde E 165 complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm etc all as specified and directed by Engr-in -charge.

All as per item No. 74 above but bore of pipe 20mm

M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm

All as per item No.76 above but bore of pipe 20mm

Refixing old steel tubing and connections in new or old position (wall, ceiling, floor etc) 15mm bore

All as per item No. 78 above but bore of pipe 20 mm

Supplying and laying15 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supplying and laying 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe.

S & F in repairs pillar taps fancy type ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe.

S & F in repairs Brass cromium plated with capstan headsshower rose of 125 mm dia complete all as specified.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.)

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete

Dismantling of PVC water tank of capacity exc 250 litre and n. exc 500 litre and complete all as specified and directed.

S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.

Complete Cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltr, etc.including dismantling and fixing as complete

S & F in repairs 25 mm chromium plated stainless steel curtain rod with fixed to brackets, stops, complete all as specified and directed.

Dinesh Constructions (BID ID -3408214)

Star Construction (BID ID -3405349)

DR J S CHADHA AND SONS (BID ID -3409777)

H S TAKHI (BID ID -3410500)

RAMESH PATIL (BID ID -3417249)

M/S B.A. GAIKWAD (BID ID -3407332)

Santhi Enterprises (BID ID -3416772)

KARPE AND SONS CONSTRUCTION (BID ID -3417124)