Work of fabrication of electric pole from 6 inch and 4 inch dia pole for making lighting arrangement at site GM office behind PO office Kundi under GM unit M-S Area.

Amount

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required. Details of cost for one No bolts and washer, painting the flat iron with primer and finish paint etc. as required

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 35 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. As required

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required, Doubble pole

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way , Double door

Fabrication of tubular electric pole from 6 inch and 4 inch dia pipe

Supply of 2 core flexible copper wire 2.5 sq.mm

Supply of 6 sqmm 2 core copper armored cable ISI marke

Street light 70 watt

Total impact of GST for the purpose of CTC

M/S MEHTA ELECTRONICS

ODYSSEY INTERNATIONAL