SPECIAL REPAIR TO ROOF AND TOILETS IN BLDG NO SL-11 (BN STORE), SL-77 (MAGAZINE) AND CMH-3B (TOILET) AT MIL STN MT ABU

Amount

Dismantling of Manglore pattern or similar tiles in roofing.

Dismantling of timber battens for tiles of any size including tilting fillets spaced exc. 15 cm etc.

Supplu and Fixing Manglore pattern tiles in roofing interlocking at side joints, laid dry.

Refixing old Manglore pattern tiles in roofing interlocking at side joints, laid dry.

Supplu and Fixing ridge or hips tiles to suit Manglore pattern roofing tiles bedded and jointed in cement mortar 1:6 etc.

Dismantling of timber scantling 40 sqcm and over in sections in any position in unframed works.

Dismantling of timber scantling below 40 sqcm in sections in fillets, rails, rafters, purlins etc.

Material and Labour for IInd class hardwood battens clean sawn at 30cm centres and sectional area exc. 5 sqcm & not exc. 15 sqcm over & including one coat of creosote oiling on battens complete.

Material and Labour for second class hardwood (SAL) scantling clean swan in unframed work as in rafters, purlins & trusses etc all as specified and directed complete.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

Dismantling of plain or corrugated asbestos cement sheeting, any gauge, thickness, including in roof covering

Supplu and Fixing galvanised 0.63 mm thick corrugated mild steel sheeting class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs coering

Fixing only CGI sheeting of any gauge with two corrugation side lap fixed with 'L' or 'J' hooks in roofs including cup washer etc complete all as directed.

Supplu and Fixing 0.80 mm thick plain galvanised mild steel sheeting in eves board, ridges, hips, valley gutters, drip and straight flashings class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs

Supply and fixing pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having 550 Mpa tensile strength as in roof covering/cladding and fixed with self tapping screws, complete all as specified.(Make-JSW Colouron plus AZ-150)

Supply and fixing pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having 550 Mpa tensile strength as in roof covering/cladding and fixed with self tapping screws, complete all as specified.(Make-JSW Colouron plus AZ-150)

Material and Labour for rolled mild steel sections in rafters, purlins and posts or hollow square pipe as in tiles battens/ purlins, nut bolts etc . where connected to common rafters and runnuing rails fixed with angle cleats or other connecting plates and nut, bolts etc. confirnimg to Fe-290 (Gde E-165).

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast con-crete articles

M/L for brick work with kiln burnt bricks built in cm (1:6) using sub class 'B' bricks of compressive strength not less than 35 Kg/Sqcm straight or curved on plan exceeding 6 mtr mean radius with old size bricks all shown on drawing and as specified.

Taking down cement plaster on brick/stone walls etc including raking out joint, hacking for key scrubbing down with water etc.

Material and Labour rendering 15 mm thick in cement mortar 1:6 on walls, surface finished even & smooth without using extra cement over a coat of 1mm thick wall putty.

Material and Labour 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof/ceiling mixed with and including liquid water proofing compound as per manufacturers' instn surface finished even and smooth without using extra cement.

Material and Labour for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in fdn, surface channel,cills copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed.

Material & Labour for Non - skid light coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and inted in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and Labour for light coloured glazed ceramic tiles in vertical surface 600mm x 300 mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete.

Taking down wooden frame with shutter without taking off shutter from the frame exceeding 1.5 sqm each but n-exceeding 4 sqm each including removing from site.

Supplu and Fixing aluminium anodised barrel tower bolt of extruded section 200 mm long.

Supplu and Fixing 150 mm size aluminium handles, cast type anodised.

Supply and fixing butt hinges stainless steel 100 mm size fixed to PVC frames complete.

Supply and fixing providing & Fixing factory made 100% Solid WPC (Wood Polymer Composite) -Door Farme 90mm x 65/45 mm (Moulded) Single Rebated made from Wood Polymet Compositge (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/Ruce Husk/Wheat Husk) and Non toxic additives fabricated with meter Joints after appliying PVC solvent cement & screwed with full body treaded star headed srews having minimum frame density of 780 kg/ cbm & manufactured by "RAJSHRI/ECHON or EQ." an ISO 9001 - 2015 Certified Company, having good screq holding capcity (Screw Withdrawal srength of (Min, 990 N) Minimum Compressie Strength of 58 N/mim2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A catgegory with property of being termite / borer proof, water / Moisture Proof & Fire retandant & Fixed in position with and including SS Dash Fasteners / Hold Fast of required dia and length, al as per specifications drawings as directed by the Engineeer-in-Chage, Material test certificate and authentication should be compulsory provided by the manufacturing company.

Supplu and Fixing PVC factory made shutter solid, PVC moulded prelam sheet both side front and back plain or coloured shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specifications & drawings.

Supplu and Fixing in repair vitreous china wash hand basin, white counter below oval type of size 560 x 400 mm including bracket.

Material and labour for providing reinforced cement concrete (nomonal mix) M-15, using 20mm graded stone aggregate as in cooking platform, counter WHB etc with and including necsaary form work complete all as specified.

Material and labour mild steel TMT bars 10 mm dia and over in main bars and stirrups, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Material and Labour for 18 mm thick south black Granite (Jet/Telephonic black) slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, polishing, half round moulding and cutting of holes for gas pipe complete.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white colour including PVC cover.

Supplu and Fixing repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.

Supplu and Fixing in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and all fittings and connections all as specified and directed.

Supplu and Fixing in repairs Jet spray, chromium plated, for EWC including hinges fixed complete all as specified and directed.

Supp and fixing in repair brass chromium plated head shower with revolving joint and 150 mm long shower.

Supply and fixing in repair, brass chromium plated tubular towel rail, 20 mm dia, 'D' type, 60 cm long between flange fixed complete all as directed.

Supply and fixing in repair pillar taps cast copper alloy with capstanb heads, chromium plated, fancy type of size 15 mm bore screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and flynut, screwed for 15 mm iron pipe and fixed.

Supplu and Fixing of GI water tubing, medium grade with fittings, fixed to wall and ceiling or laid in floor of size 15 mm bore including taking down old GI pipe.

Supplu and Fixing of GI water tubing, medium grade with fittings, fixed to wall and ceiling or laid in floor of size 20 mm bore including taking down old GI pipe.

Supply and fixing in repair stop valve cast copper alloy, chromium plated, fancy type with long shank and cup concealed type of size 15 mm complete all as specified and directed.

Supply and fixing in repair, angle cock cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed, concealed of size 15 mm bore.

Supply and fixing in repair, bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly hande screwed down, screwed for iron pipe or for brass ferrule and fixed, concealed of size 15 mm bore complete all as specified and directed.

Dismantling of water tanks capacity 500 ltr and removing from site.

Supplu and Fixing in repair white coloured rotational molded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge.

Supply and fixing of ball valve, high pressure with polythene float and flynut, screwed for iron pipe or brass ferrule of size 20 mm complete.

Supply and fixing in repair, gun metal valve with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore complete all as specified and directed.

Supplu and Fixing 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supplu and Fixing 75mm PVC (SWR) bends any radius complete all as specified and directed.

Supply and fixing of 75 mm CI Nahani trap with PTMT gratings (minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 all as specified and directed.

Supplu and Fixing in repairs 32 mm PVC waste pipe for wash basin, 600 mm long

Supplu and Fixing in repair PVC connections 45 cm long including 15 mm bore PTMT nuts on both ends complete all as specified and directed.

Supplu and Fixing in repair vitreous china half stall urinal white incl. connection to flushing pipes, waste fittings & pipe, out going pipes and brackets etc.

S/F in repair urinal spreader chromium plated for fixing with 15 mm bore pipe etc.

Supplu and Fixing in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

Removing building materials to a distance of 100m or under, beyond the lead incl in the rates incl loading, unloading and stacking at the destination complete

Complete removal of existing surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of walls complete all as specified and directed.

Material and Labour for applying 1 mm thick weather coat Asian/Birla/JK wall care white putty in two layers white wall care putty on complete removal of existing treatment externl or internal walls complete all as specified and directed.

Material and Labour two coats of oil bound distemper (acrylic) white or tinted over and including prepared putty surfaces of walls etc.

Material and Labour two coat of synthetic enamel paint over old/new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces compelte.

Material and Labour for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10 cm in width or girth including preparation or surfaces complete.

Material and Labour two coat of exterior emulsion roof tile paint coloured on roof tiles and fascia of roof over one coat primer all as spd & directed.

Material and Labour two coat of exterior emulsion paint coloured on walls over one coat primer all as spd & directed.

Taking down carefully aluminum/copper point wiring (light/fan/socket/power) complete including fittings such as switch, socket, ceiling roses light fittings etc and and making good disturbed surface of wall all as specified and directed by Engineer-in-Charge. (Serviceable light fitting to be kept separately for re-use).

Material and Labour for point wiring 1.5 Sqmm nominal area PVC insulated and unsheathed multistranded copper conductor FRLS in PVC concealed concuit with suitable metal box and hylem sheets with multistranded insulated solid copper earth continuity conductor of size 1.5 sq mm complete all as specified and directed by Engr-in-Charge :-

(a) One light point controlled by one switch one way

(b) One fan/exhaust fan point controlled by one switch one way

(c) One socket out let 5 Amps 5 pin on independent board

(d) One socket out let 5 Amps 5 Pin on same board with other switch

All as per item No 2 here in before but with cable size 2.5 Sqmm for one 5 pin 15 Amps socket out let on independent board and multistanded insulated solid copper earth continuity conductor of size 2.5 Sq mm all as specified and directed by Engr-in-Charge.

Supplu and Fixing switch piano flush type 5 Amps single pole one way. Make:Cona/Anchor/Havells

Supplu and Fixing socket out let 2 in 1 multi pin 5 Amps flush type universal. Make:Cona/Anchor/Havells

Supplu and Fixing switch socket combination 2 in 1, multi pin 5 Amps flush type universal. Make:Cona/Anchor/Havells

Supplu and Fixing switch socket combination 2 in 1, multi pin 5 Amps/15 Amps flush type universal.

Supplu and Fixing Ceilling rose on PVC board size 65 X 50 mm three terminal Complete. Make:Cona/Anchor/Havells

Supplu and Fixing Angle holder backelite complete all as specified.Make:Anchor/ Philips/Cona

Supplu and Fixing fan regulator electronic step type, 230 volt , 50 Hz complete all as specified. Make:Cona/Anchor/Havells

Supplu and Fixing MCB single pole, Curve 'C' 240 volts 5 to 32 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supplu and Fixing MCB single pole and neutral, Curve 'C' 240 volts 32 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supplu and Fixing MCB single pole and neutral, Curve 'C' 240 volts 40 to 63 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supplu and Fixing MCB DB SPN 8 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail double door complete all as specified. Make Havells/ Legrand/L&T.

Supplu and Fixing MCB DB TPN 04 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail complete all as specified. Make Havells/ Legrand/L&T.

Material and Labour for sub main wiring with 2 x 4 Sqmm copper conductor (Multistandered) 1x4 sqmm copper conductor wire as earth continuity in PVC counduit all as directed.

Supplu and Fixing LED LED light fittings 1x18 watt, 220 volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductore cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and dirtected by Engr-in-Charge.

Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and dirtected by Engr-in-Charge.

Taking down old u/s exhaust fan and supply and fixing exahust fan steel body AC single phase, 230V of size 300mm sweep with blades and frame and louvers complete all as specified. Make - Havells/Bajaj/CG or its equivalents.

Hanging only ceiling Fan (MD supply) and connectiong up including provision of cable from ceiling rose or connector to fan.

Earthing complete with GI steel earth plate eletrode 60 cm X 60 cm X 6.3mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground,connected to Gl iron or steel earth wire 4 mm dia (8 SWG) by means of nuts,bolts checks nuts and washers made of Gl iron or steel earth wire protected by Gl iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC coverslab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges,necessary excavation and earth work in any type of soil complete all as shownin electrical plate No 3 of MES schdule part-I and testing after completion

Haritwal traders

M/s ESS KAY Construction

boon construction company

Suchit constructions

Choudhary Traders and Engineers

M/S Balkishan Panwar Construction

J.J.ENGINEERING

M/s B. S. Solanki Builders