58/EUCC-V/LESA/2023-24

Amount

Safe Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dump store and JE dump store to work site within municipal areas.

Cost of 33 KV 3x300sqmm XLPE Cable

33 KV Jointing Kit 3x300 sq mm Cable Outdoor

33 KV Jointing Kit 3x300sq mm Straight Through

STP 11 M long

33 KV pin insulator

Top channel 100X50 MM 10 kg / mtr

MS angle 65x65x6MM 5.8 kg / mtr

33 KV pin with nut

M S Earthing Rod 20x2500 mm

LT XLPE Cable AL.1X400 Sq.mm.

MS channel 100x50 mm

Laying of D/C 33 KV 3x300 Sqmm XLPE cable in parallel in normal soil by digging of trench 1050 mm deep & 750 mm wide its boxing with bricks laying of cable & seperation of cable by brick wall, filling of sand upto top and covering with stone slab after laying of cable (All material will be provided by contractor except 33 KV cable)

Laying of single Circuit 33 KV 3x300 Sqmm XLPE Cable by drill method

Laying of single 33 KV 3x300 Sqmm XLPE Cable by drill method in HDPE Pipe 150 mm dia (All material will be provided by contractor except 33 KV cable).

Laying of 33 KV 3x300 sq mm XLPE single cable in GI-Pipe 150 mm dia by digging of cable trench 600 mm wide and 900 mm deep (All materials will be provided by contractor except 11 KV cable)

Grouting,Plinting and Painting of new erected 11M long ST poles of single pole support,double pole cable exposures and end type poles of 33 KV lines

Digging of Pit in kachcha/Pakka land in depth upto 1/6 length of Pole, Dragging of STP from near by place/Dump, Erection of Single pole along with stone pad in bottom with proper alignment of line for 33 KV line on 11 M long ST Pole and refilling with ramming of earth.

Grouting of pole in depth of 1/6 the length of pole in ratio 1:4:8 in cement sand and brick balast as per RESPO norms.

Construction of pole plinth 300mm x 450 mm above ground level in 1:2:4 in cement, coarse sand and stone gritt as per RESPO norms.

Painting of new erected ST pole with two coat of red oxide paint,PO red paint at top of pole 2 M & balance by two coats of best quality aluminium paint ISI of Burger/Nerolac/Asian mark as per norms.

Ordinary Earthing of pole by M.S. Earthing Rod 20x2500 mm as per Resspo Norms only earting rod provided by deptt

Fabrication & erection of 33 KV Exposure type double pole with the provision of bus bar on 11 mtr. long ST-Pole with fixing of necessary clamps & other accesories like 02 No. Channel 100x50mm (1600 mm each) , 02 No. Bracing angle 65x65x6 mm (2800 mm each) for supporting the hoisting of cable on pole, 09 No. Pin insulator with pin, Danger board, number plates and Barbed wire etc. Its jumpering by single core PVC Al. Cable with proper size of lug.Painting of double pole with one coat of red oxide & two coats of enamel paints (ISI mark). Its grouting in ratio 1:4:8 & plinthing 300 mm above ground level WITH EARTHING OF POLE (All required materials will be provided by contractor except ST- pole, steel parts, Pin insulator with pin and PVC Al. cable)

Hoisting of 33 KV 3x300 Sqmm XLPE cable on D/P through GI- pipe of size 6" dia 3 mtr long including its jumpering complete with holding clamps, PG clamps, Nut & bolts (All material will be provided by contractor)

Digging of pit of size 3x2x1.2 mtr for making straight through joint of 33 KV cable size 3x300 Sqmm work included boxing of pit by sand, brick and stone slab filling of soil levelling and ramming of the same. (St/th provided by the deptt.)

High Pressure Testing of 33 KV cable. Testing equipment will be arranged by contractor.

Fabrication & Erection of cable stand made of two nos MS channel 100x50x3 mtr. Long jointed to each other by means of 05 nos MS strip 50x6 mm of size 150 mm Long each by welding at equal distance interval as per norms and grouting in block of 300x300x700 completely providing two nos cable clamp also.(All materials will provide by contractor except MS channel).

Painting of cable stand/Existing structures.

Hoisting, jumpering, clamping of 33 KV 3x300 sq mm XLPE cable on cable stand/Structure/RMU with proper jumpering with help of PG clamps (required PG clamps will be provided by contractor).

Supply and fixing of cable route marker of 33 KV Line

Cutting/Trimming of tree branches

Safe Dragging, loading, carriage and unloading of balanced materials with proper stacking from site to JE dump store/Lesa store after completion of work.

Provide NOC from Electrical safety Directorate before energization of erected 33 KV line

ARIHANT ELECTRIC COMPANY

SINLESS ELECRICAL CO. PVT. LTD.