Construction of Shops at Dr. Radha Krishanan Medical College Hamirpur at Jol Sappar Tehsil Nadaun Distt. Hamirpur (H.P.)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:6 (one cement : six coarse sand) in super structure above plinth level up to all floors level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m(one point five zero metre) in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (one point six zero plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg(forty kilogramme)), G.I fasteners 100 x 8 mm(one hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm(ninety two into forty four millimetre) & sash 32 x 60 mm(thirty two into sixty millimetre) both having wall thickness of 1.9 ± 0.2 mm(one point nine plus minus zero point two millimetre) and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm(one point seven five square metre)). The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Applying one coat of water thinnable cement primer (Asian / Dulux /Berger paints/Nerolac) of approved brand and manufacture on wall surface complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and applying white cement based (Birla White/ J.K ) putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 (fifty) grams/ litre of approved brand and manufacture , including applying additional coats wherever required to achieve even shade and colour. including all ncidentals. The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. (Only weight of grill to be measured for payment).

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm(one point six zero plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm(one hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge. (Single / double glass panes and silicon sealent shall be paid separately). Casement door with 3D hinges made of (big series) frame 67 x 64 mm(sixty seven into sixty four millimetre) & sash 67 x 110 mm(sixty sevsn into one hundred ten millimetre) both having wall thickness of 2.3 ± 0.2 mm (two point three plus minus zero point two millimetre) and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm(two point zero zero square metre)). The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in uPVC/aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) with toughened glass panes of 12.0 mm (twelve point zero millimetre) thickness (weight not less than 30.0 kg/ sqm (thirty point zero kilogram per square metre) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.

Providing and fixing Fly proof stainless steel grade 304(three hundred four) wire gauge with 0.5 mm(zero point five millimetre) dia. wire and 1.4mm (one point four millimetre) wide aperture with matching wood beading panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion in side grooves or rebates measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm(twenty five millimetre to forty millimetre) thick : including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.

Supplying and fixing steel work in single section, fixed with or 80x1.25mm(eighty into one point twenty five millimetre)) M.S. laths with 1.25mm(one point twenty five millimetre) thick top cover rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm (twenty seven point five centimetre) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454- part 1 and M.S. top cover of required thickness for rolling shutters including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing ball bearing for rolling shutters. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine zero liter/ ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight zero liter/ ten square metre) of approved brand and manufacture including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying gang saw cut 18 mm(eighteen millimetre) thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm(twenty millimetre) thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x600x6mm (six hundred into six hundred into six millimetre) ACP panel ceiling with pre-painted GI channel framing @ 600mm(six hundred millimetre) centre to centre with suitable screw complete as per approved drawing, design and specifications including carriage of material upto all leads & lifts as per direction of EEngineer-in -charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of Orient bell/ Kazaria-Eternity/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(Three point three kilogramme per square metre) including grouting the joints with white cement and matching pigments etcetra complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government