REPAIRS TO ROOF SHEETING, FALSE CEILING, JOINERY, TILING AND ALLIED CONNECTED REPAIRS IN ZONE I AND III AT LEKHAPANI

Amount

Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including frames and cover fillets complete all as specified and directed by Engr-in-Charge..

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed by Engr-in-Charge..

Taking down roof trusses, coupled rafters or trussed beams of clear span above 4 mtrs and upto 8 mtrs complete all as specified and as directed by Engr-in-Charge..

Dismantling timber scantlings in unframed timber work 40 sq.cm and over in section, in any position complete all as specified and as directed by Engr-in-Charge..

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as directed by Engr-in-Charge..

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each complete all as directed by Engr-in-Charge..

Fixing only roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete are as specified and directed by Engr-in-Charge..

Supply & Fixing structural steel work in hollow square/rectangular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 4923 -1997 (Reaffirmed 2009) grade Yst.-310 complete all as specified and directed.

Supply & Fixing structural plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment cofirming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

Material and Labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, long but length of bolt exc 5cm but n exc 10cm long, diameter of neck 5 to 10 mm complete all as specified and as directed.

Material and labour for second class hardwood, scantlings, wrought, fixed in unframed work complete as specified and directed.

Supply and fixing galvanised steel wire netting 0.71 mm dia and 25 mm size of mesh for lathing, fixed with tinned of wire staples to wooden frame in all including all laps, cutting and waste complete all as specified and directed.

Material and labour for rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of newly plastered surfcaes of walls and preparing surfaces as directed and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for rendering 10mm thick plaster in CM (1:6 ) on fair faces of brick work or concrete surfaces including finishing top surfaces even and smooth without using extra cement complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of walls and preparing surfaces as directed and applying two coats of distemper over a coat of primer complete all as specified & directed.

Material and labour for preparation of old plastered surfaces of walls,by washing,rubbing down and stopping of distempered and painted surfaces etc.and applying one coat of distemper oil emulsion complete all as specified & directed.

Material and labour for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified & directed.

Material and labour for preparation of old painted or plastered surfaces of walls etc by washing, rubbing down and applying one coat of cement base paint complete all as specified & directed.

Material and labour for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed

Material and labour for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

M&L providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from purlins or truss member using 2 to 3 mm dia GI wire, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed by Engineer – in - Charge.

Material and labour for 4 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation ad acoustic purpose to be placed in grid system hold down clips with provision of high fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc, complete all as per manufacturer instructions complete all as pecified & as directed by Engr-in-Charge..

Supply and fixing mild steel framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified & as directed.

Supply and fixing 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); complete fixed to frame all as specified & as directed.

Supply and fixing 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & fixed to chowkats complete all as specified & directed.

Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description), from alumunium, wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing 2.5mm to 3mm thick PVC transparent window panes ordinary quality and glazing with necessary beadings any type as required in squares exc 0.5sq. m in each pane complete all as specified and as directed

Supply and fixing in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

Supply and fixing 100mm size butt hinges, medium weight, cold rolled mild steel with and including stainless steel screws complete all as specified & as directed.

Supply and fixing 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.

Supply and fixing 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.

Supply and fixing 300mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed.

Material and labour for preparing new wood & wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of old painted surfaces of steel of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Material and labour for preparing old wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all complete all as specified and directed by Engr-in-Charge..

Material and labour for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified & directed.

Material and labour for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in vertical surfaces such as skirting/dado, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) for vertical surfaces such as skirting/dado complete all as specified & directed.

MAA COMMUNICATION

RIA CONSTRUCTION