Construction of toilet at Tatabad middle school in ward no.68 in central zone

Amount

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. Sl.No.122

Supplying and erecting centering for sides soffits including supports and strutting upto 3.29m high for plain surface such as rectangular column top and bottom slabs of boxing, sill, slabs, sun shade etc., in all floors using mild steel slabs of sizes 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25X25x3mm for boarding laid over country wood joists of size 10cm X 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., complete as directed. Sl.No.123 C Part-II

Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification as per the direction of departmental officers etc, completed

Reinforced Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for all RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete.

Fly ash Brick work in cement mortar 1:5 mix (one cement five sand) using II class ground molded bricks chamber burnt bricks of size 9" X 4 1/2" X 3" for the following including curing etc., completed.

Supply and fixing of RCC jolly

PLASTERING with cement mortar 1:3(one cement and Three sand by volume) 12mm thick for all internal/external surfaces like super structure, rainwater, ducts, elevation in all floors complying with standard specifications.

PLASTERING with cement mortar 1:5(one cement and five sand by volume) 12mm thick for all internal/external surfaces like super structure, rainwater, ducts, elevation in all floors complying with standard specifications.

Daddoing the walls with first quality approved colour glazed tiles with printed design of 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc.,complete - 10 m2

Flooring finishing with first quality design ceramaic tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Weathering course in concrete broken stone brick jelly 20mm size in pure slacked lime over RCC slab. The proporation being 32:12:5 for requuired slope and the thickness of as required and well beaten with wooden beaters etc., completed - 10 m3

Terrace flooring with one couse of pressed tiles of size 23 X 23 in cement mortar 1:3 mix with impermo oil 2% by weight of cement and pointed with same oiled mortar

Painting with emulsion paint from ISI make for walls including cost of material and labour charges etc complete as per the standard specification and the instruction of the departmental officers etc complete

Painting new iron work for doors, windows, grills, weld mesh sceens etc., two coats over one coat of primer

Supplying and Laying Hydraulic Pressed Paver Block Providing and laying of 63 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Supplying and fixing in position of Indian make white water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position levelling complete with necesary connection as per standard specification

Stainless Steel Sink 600mm x 600mm x 200mm

Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALENT

Supplying and delivery of PVC & GI specials for approver brand including cost & convence of all meterials to work site etc., Completed as per standard Specification

a)63mm PVC Pipe

b)40mm PVC Pipe

c)63mm PVC Tee

d)63mm PVC Elbow

e)63mm PVC Bend

f)63mm End Cap

g)40mm PVC Tee

h)40mm PVC Elbow

i)40mm PVC Bend

j)40mm End Cap

k)Shellock Bottle

Towards labour charges for laying and jointing PVC Pipe and Specials etc.,complete as per standard Specification

Earthling as per lSl Specification with an ea(h electrode ol 2.1mt class 'B' Gl pipe of dia not less than 40mm and with 20mm dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangement using charcoal, common salt, G.l-reducer, check nuts etc., and masonry work and providing RCC cover slab 38mm thick for the Brick masonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers. (sD 233)

Supplying and run off 8 SWG copper wire on walls or below ground level with necessary'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental otflcers.(SD 75)

Supply and run otf 2 of 2.50sqm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with lSl mark confirming to 15:694/1990 with continuous earth connection by means of 1.50sqm PVC insulated single core unsheathed copper conductor cable confirming to 15:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. (denved from SD 55)

Supply and run off 2 of 1.5 sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with lSl mark confirming to IS:694/1990 with continious earth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to 15:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall ior mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. (derived from SD 54)

Supply and fixing of TNEB meter Board suitable for 32 A Three phase service connection with 32A fuse unit(500v)32A neutral link and earth link (1" x 1/8" Copper flat) on T.W plank of size 600mm x450mm x19mm with supportingT.W.reepers of '1" thick oneither sider with painting withsuitable bolt and nuts for fixingthe TW plank on wall withearth connection and interconnection wlh 7120 Pvcinsulated copper wire from EBmeter to fuse unit. SO 127)

Supply and Laying of 4 x 6 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 743

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 744

Wiring with 2 x 1.5 sqmm (22 lo.3 ) PVC insulated single core unsheathed copper conductor cable ol 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. swtch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic requlator). SD 23

Wiring with 2 x 1.5 sqmm (22 10.3 \ PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories flush all with 150 x 100 x 1'13 mm TW swtch box wth 3mm hylum sheet cover for 5A 3 pin non nteT locking CS plug with continucus eartn wrre connecticn of 14 SWG TC wire anc n'akin j Eood of the concealed portion with suitable ccloJr'3r ccncealed PVC plug point. SD 38

supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. SD528

Supply, Delivery and Instalation of Sanitary napkins vendlng machine as per the following standard specification Model - NV50E Capacity - 50Napkins Acceptable Coin - Multi Coin (INR 1,2,5,10) Input Voltage - 1ph 230V 50HZ Weight (Approx) - 18Kg Mounting - all Dimensions in MM (LBH) - 700x140x435 Features - Compact in size, Elegant design and curvy edges, Accept all denomination of coins, Automatic battery backup function, The machine can reject coin when there is no stock, The customer can set napkin price for an individual row, The machine can store transaction history, LCD display can show napkin price & avilability, Transparent glasses to view napkins, Separate lock & key for the door and coin box.

Supply, Delivery and Instalation of incinerator machine as per the following standard specification Power Input - 240V Body - MS powder Coated 1.2MM thickness consumpation of power - Upto 2000W Capacity - 10 to 12 Napkins at a time Mechanism - Auto off Temperature Controller - Inbuilt Automatic timer - Inbuilt Working Indication - LED Weight - Less than 20Kg thermal Insulator- Cera Woll Fixtures - Both wall mount and floor stand type (Depends on the site condition) Exhaust pipe line - Minimum 2mtr.

Supply and fixing of mild steel door using all round "L" angle 25 X 25 X 6mm thick, cross bracing 20 X 6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc., Size : 0.60 X 1.85 = 1.11 m2

Solid PVC Door Shutters using 19 Gauge 19mm MSsquare tubes for styles and outer frames.15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Supply and fixing 600mm x 600mm medium duty SFRCcover

Supply and fixing of Monoblock 1.00Hp Motor etc.,

Supplying and fixing in posltion C.P. Towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plug and C.P. Screws etc. complete complying with standard specrfication.

Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C-P. screws. etc. complete complying with standard specification.

S RAJATHI (BID ID -1108455)