Construction work of toilets and ramps for the disabled etc. in the premises of the office of the Provincial Public Works Department, in District Bulandshahr

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge..As Per DSR 2.6.1. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Cement concrete with 4cm (1/2") gauge approved stone ballast, approved coarse sand, cement in the proportion 6:3:1 including supply of all materials,labour,T&P etc. required for proper completion of the work.As per DSR 4.1.6. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Brick work in 1:4 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials,labour,T&P etc. required for proper completion of the work. Including all type of taxes,octroi,toll taxes,labour cess,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.As per DSR 6.2.1. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :As per DSR 5.2.2. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Brick work in 1:4 cement & coarse sand mortar in Super Structure including supply of all materials labour,T&P etc.As per DSR 6.4.1. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Steel reinforcement for R.C.C. work ready to use “cut and bend” rebars of approved make from actory/workshop to construction site including placing in position and binding all complete upto plinth level. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

12 mm cement plaster on brick wall of mix : 1:6 (1 cement: 6 Coarse sand).Including all type of taxes, octroi,toll taxes,labour cess,cost of all material, labour T&P etc required for proper completion of work as per Direction of E/I.But excluding GST.As per DSR-13.4.2. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Providing and applying plaster of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. As per DSR no 13.26. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior primer applied @ 2.20 kg/10 sqm.As Per DSR 13.48.1. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Painting with synthetic enamel paint of approved brand & manufacturing to give and even shade. Two or more coats on new works. As per DSR no 13.62.1. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Steel work welded in built up sections/ framed work, including cutting,hoisting,fixing in position & applying a priming coat of approved steel primer using structural steel etc.as required.In stringers,treads,landings etc.of stair cases, including use of chequered plate wherever required,all complete. As Per DSR 10.15.1. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

1:2:4 (1 cement : 2 coarse sand (zone-lll) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) As per DSR no 4.1.3. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. As per DSR no 11.41.2. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Providing & fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood & well matched teak 3 ply veneering with vertical grains or cross bands & face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary Screws.Including cost of,all material ,labour,T&P,royality complete.As per DSR 9.20.1 but excluding GST

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.(DSR-17.7A). Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931..(DSR-18.53). Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(DSR-18.51.1). Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(DSR-18.48). Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (15 mm nominal outer dia).(DSR-18.7.1). Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (25 mm nominal outer dia).(DSR-18.7.3). Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).. including supply of all materials ,labour and T & P complete.As per DSR No. 11.20.1. Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates efc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastenersetc.). including supply of all materials ,labour and T & P complete.As per DSR No. 10.28 . Including all material,labour,T&P etc.as required for proper completion of work as per direction of Engineer-In-Charge and including all taxes,royalty,labour cess But excluding GST.

Please Enable Macros to View BoQ information