REPAIR/MAINT OF CERTAIN MISC E/M WORKS AT TALBEHAT MIL STN

Amount

Prunning of tree branches not less than 1.5 mtr around the LT/HT Over head line which obstructing the maintainance of electric supply as well as illumination in area including repair of damage broken ACSR conductor GI wire and jumpers, testing of line complete all as specified and directed by Engr-in-charge. NOTE:- Each span shall not be less than 30 mtr length.

Installation cleaning, bushes and grass cutting including removing cutting materials complete all as specified and directed by Engr-in-charge.

M&L for Scraping the existing old surface of HT/ LT Poles and painting with one coat of primer and two coats of silver paint and marking of poles with 30 cms black and 30 cms white upto 1 meter height of pole on LT and marking of HT poles with Red and white paint , and marking of poles with standard size( 15 cms x7.5 cms ) of letters complete all as specified and directed.

Supply and fixing in replacement of unserviceable MCCB, 415 volt, fixed type, 36KA, 4 pole, capacity 400 Amp complete all as specified and directed. MAKE:- ABB, Havells, LEGRAND.

S&F in repair for E14 screw base lamp holder with E14 base LED lamp warm white holder fitting arrangement complete all as specified and directed.

M & L for spreading 40mm size stone aggregate spread and levelled in Sub Station around two pole/four pole structure all as directed.

M&L for bamboo ladder size 80 mm dia, 9m length, minimum strength 150 kg/step complete all as specified and directed.

S&F Euroload four pole on load changeover switch 400A confirm to IS 13947 complete all as specified and directed.

M&L in replacement of Earthing complete with galvanised steel earth plate electrode 60cm X 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below ground level earth plate connected with GI earthing strip (25X4mm) as earthing lead for transformer/feeder pillar box etc by means of bolts, nuts, check nut and washers of galvanized iron all as shown in Electrical plate No.3 of MES Sch part I and testing on completion. Necessary excavation and earth work, adequate common slat, charcoal dust and funnel PCC (1:3:6) type C-1 pit with pre-cast RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 6 mm dia bars, MS bar 3 Nos both ways funnel with 20,mm dia GI medium grade watering pipe , earthing lead from earth plate to equipment earth point complete all as specified. Note:- 1.Additional earth strip shall be measured and paid separately under respective item here in after 07 meter more then from pit.

Supply and fix cable End Joints and testing cable end box LT 1.1 KV (heat Shrinkable) with jointing materials suitable for LT XLPE cable of size 3.5 Core 95 Sqmm indoor type. Make : DENSONS/CCI/M-SEAL/RAYCHEM RPG

Taking down/ Dismantling of solar panel board , Silicon seal, Gasket , Electric back up coil water tanks , capillaries and piping system for repair / replacement for damaged / U/S Parts of water heater system . Re fixing / reassembling the same after repair/ replacement the defective components of capacity of 100 LPD / 200 LPD complete all as specified and directed. Note:-The rates of material / spares is not included in this item rate. Spares will be measured and paid separately.

Supply and fixing the following parts/ components of 100 / 200 LPD Solar water heaters complete all as specified and directed.

Solar water heater vacuum tubes

Gasket

Silicon Ring/seal

Electric back up coil with thermostat 2 Kw to 3 Kw

Taking down/ Dismantling of old U/S Angle iron/MS work and M&L for making /repair the same with suitable angles /flat iron/ bars etc including painting complete all as specified and directed.

M&L for UG cable 10 Sq mm 2 Core XLPE insulated heavy duty electric cables with Stranded aluminium conductor, 1100 volts grade, passing through trenches/ducts/pipes and climbing on poles/walls including fixing with proper size of aluminium lugs in replacement of street light OH ACSR conductor. NOTE:- Excavation and earth work to be measured and paid separately.

S&F in replacement Hot press PVC moulded (Fire Proof) junction box of size 150 mm x 100 mm x 60 mm, complete with two No. aluminium bus bar of size 100 mm x 30 mm x 05 mm for phase and neutral, mounted on insulators, front opening door, locking arrangement and fixing with suitable size clamp and nut and bolt on pole, Including connection of incomer and out going cable by Galvanizes nut bolt and washer of suitable size and proper lugs, making hole in bus bar . Make of PVC Box:- Sintex Industries.

Excavation in trenches in soft/disintegrated rock/hard dense soil etc n. exc 1.5 m wide and n.exc 1.5m in depth for foundation etc or for shafts, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 meter in depth and getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm each layers complete all as specified and directed.

Removal of excavated material & surplus spoil n. exc 50 m to a distance and depositing where directed at a level n.exc 1.5 meter above the starting point complete all as specified and directed.

M&L for spreading clean dry sand cushioning to underground cable in layers of 23 cm (8 cm deep before laying of cable and 15cm deep over the cable) after laying the cable in trenches including punning thickness up to 18 cm , and filling in FOL Store as required complete all as specified and directed. Note: - Only punned thickness will be considered for payment.

Supply and laying burnt bricks sub class 'B' old size for cable protection laid length wise perpendicular to the axis of cable complete all as specified and directed.

M&L for Scraping the existing old surface of panel boards and painting with one coat of primer and two coats of yellow paint and marking of accessories fixed in panel boards standard size of letters complete all as specified and directed.

M&L for foam filling for fire fighting extinguisher type A,B,C Type installed at different installations including painting with standard colour of fire fighting code complete all as specified and directed.

Supply and fixing pipe galvanised, medium grade with all fittings fixed to walls and ceiling or laid in floors complete all as specified and directed of size 40 mm dia complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in couping of poles etc including fair finishing the exposed surface even and smooth with out using extra cement and necessary form work all as specified and directed

M&L for replacement of 150 watt flood light by repairing the LED driver including taking down and refixing the same at same / different location complete all as specified and directed. Note:- Rates of wire (upto 1.00 meter), Nuts bolts may be included in the coated rate.

M&L for replacement of LED 25 watt wall light size 300x300mm with LED driver including taking down and refixing the same complete all as specified and directed.

Supply, fixing and testing high performance LED Street Light fittings ENDURA PEARL PLUS luminaries of 70 Watts, energy saving and environment friendly long life pressure die -cast aluminium hosing high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP-66 Protection and impact resistance of IK07 with 10KV Built-in-Surge Protection Device suitable for pole dia 54 mm including bracket hook type complete with 3.0 m long 40 mm dia med grade GI pipe with MS clamp and nut bolts complete all as specified and directed , MAKE : Havells Model ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO or equivalent make Philips/CG/Halonex

M&L for GI pipe bracket 32mm light grade bend type minimum 1.5 mtr length suitable for LT pole street light including MS clamp with nut bolts and washers complete all as specified and directed.

M&L for MS nut bolts and washers any kind any description as per site requirement complete all as specified and directed.

M&L for replacement of ACSR conductor for OH line complete all as specified and directed.

M&L for replacement of Pin insulator for LT OH line complete all as specified and directed.

Re-streching of LT/HT OH line ACSR conductor of any size upto suitable seg point including GI wire of any size complete all as specified and directed.

AUTOMATION AND SWITCHGEAR PANELS

HARNAM SINGH ANIL SINGH