REPAIRS TO JOINERY, ROOF TREATMENT AND ALLIED WORKS IN CERTAIN BUILDINGS IN ZONE-I AREA UNDER AGE B/R-I OF GE JAIPUR

Amount

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed by Engineer in Charge.

Taking down of shutters of any description exc 2 sqm each complete all as specified and as directed by Engineer in Charge.

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame complete all as specified and as directed by Engineer in Charge.

Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4 Sqm each without taking off shutters from the frame complete all as specified and as directed by Engineer in Charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engineer in Charge. Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and as directed by Engineer in Charge. The size of members of shutters shall be as specified in MES SSR Part-I complete all as specified and as directed by Engineer in Charge.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer in Charge. The size of members of shutters shall be as specified in MES SSR Part-I complete all as specified and as directed by Engineer in Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer in Charge. Make - Rajshri, Sintex

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer in Charge.

S&F steel window with side hung shutters factory made including box type hinges with steel handle and steel peg stay compete with glazing bars devetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary including taking down complete all as specified and as directed by Engineer in Charge.

S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary including taking down complete all as specified and as directed by Engineer in Charge.

S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete including taking down all as specified and as directed.

S&F 300mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as specified and as directed by Engineer in Charge. .

,---ditto--- all as per srl item No. 14 above but in repair complete all as specified and as directed.

S & F 150mm long aluminium handles, cast type anodised complete all as specified and as directed by Engineer in Charge.

,---ditto--- all as per srl item No. 16 above but in repair complete all as specified and as directed.

S & F 100mm long aluminium handles, cast type anodised complete all as specified and as directed by Engineer in Charge.

,---ditto--- all as per srl item No. 18 above but in repair complete all as specified and as directed.

S & F 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and as directed by Engineer in Charge.

,---ditto--- all as per srl item No. 20 above but in repair complete all as specified and as directed.

S & F 150mm long aluminium anodised barrel tower bolts of extruded sectionand fixed complete all as specified and as directed by Engineer in Charge.

,---ditto--- all as per srl item No. 22 above but in repair complete all as specified and as directed.

S & F 100 mm butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engineer in Charge.

,---ditto--- all as per srl item No. 24 above but in repair complete all as specified and as directed.

S & F 75 mm butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engineer in Charge.

S & F in repairs aluminium door stopper 150 mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete all as specified and as directed by Engineer in Charge.

S & F galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer in Charge.

S & F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples as to replace the old wire mesh complete all as specified and as directed by Engineer in Charge.

M&L cutting holes in stone walls built in Cement Mortar exc half but n exc one brick depth or embeded portion of hold fast or lugs incl making good to distrubed portion in CM 1:3 or PCC 1:2:4 type B1 as required complete all as specified.

S&F sheet glass 3.00mm thick ordinary quality and glazing with beads fixed with metal panel pin in square n.exc 0.5 Sqm each including hacking out old broken glass complete all as specified and as directed.

,---ditto--- all as per srl item No. 31 above but frosted or obscured complete all as specified and as directed complete all as specified and as directed.

S&F MS famed work such as guard bar/grill, gratings etc with ends of bars shouldered/ritveted or forced into spikes conforming to FE-310-0 or Fe-410-0 complete all as specified and as directed by Engineer in Charge.

M & L Preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer in Charge.

M&L Two coats of synthetic enamel paint to new steel surfaces over red oxide primer exc 10 CM in width or girth including preparation of new steel surfaces complete all as specified and as directed by Engineer in Charge. .

Supply and fixing anodised aluminium frame for door, windows, ventilators with one or more rebates incl jointing cleat for fixing etc complete all as specified and as directed.

Supply and fixing anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed by Engineer in Charge.

Supply and fixing anodised aluminium window and ventilator shutters, side hung typewithout sash, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium fittings such as peg stays 150mm long 1 No, hinges type B-21, 100mm long (2 No) suitable handle 1 No complete all as specified and as directed by Engineer in Charge.

S&F aluminium grill of size 50mm x 50mm size of mesh and 6mm dia fixed complete to existing frame complete all as specified and as directed by Engineer in Charge.

M&L for 09 mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice lamination fixed with screw complete all as specified and as directed by Engineer in Charge. .

,---ditto--- all as per srl item No. 40 above but in repairs complete all as specified and as directed

S&F sheet glass 4.00 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed

,---ditto--- all as per srl item No. 40 above but frosted or obscured complete all as specified and as directed

M&L for solar control film 25micron reflective type sticked to glass panes as per instruction of manufaturer complete all as specified and as directed by Engineer in Charge. .

S & F brass mortice lock verticle type size 65mm, 4 levers with escutcheon plates and two keys fixed in aluminium frame complete all as specified and as directed by Engineer in Charge. .

,---ditto--- all as per srl item No. 45 above but in repairs complete all as specified and as directed

F&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer in Charge.

S&F in repair Door closer aluminium anodized extrudedsection body hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg as in repairs complete all as specified and as directed by Engineer in Charge.

S & F in repair drappery rod / curtain rod with brackets and all accesories fixed in repair of stainless steel including taking down complete all as specified and as directed by Engineer in Charge.

Taking down cement plaster or cement lime plaster/ tiles of any descrption on PCC/ stone surface/ brick surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer in Charge.

M & L Rendering 15 mm thick on stone masonry wall surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.

M & L rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.

M & L Rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.

M & L preparing new plastered surfaces and applying three coats of white wash on ceiling all as specified and as directed

M & L preparing new plastered surfaces and applying two coats of cement base paint on wall over a coat of alkali based primer all as specified and as directed

M&L preparation of newly plastered surface wall and applying two coats of distemper oil emulsion of any tint over a coat of primer complete all as specified and directed.

M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying one coat of white wash on ceiling surfaces complete all as specified & as directed.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying one coat of distemper of approved tint all as directed.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying two coats of distemper of approved tint all as directed

M&L preparing old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and directed.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises

M & L glazed coloured ceramic tiles 300x450x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer in Charge.

M&L light shade Vitrified Ceramic tiles 9-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.38 sqm, in floors etc, set over 15mm thick screed in CM 1:6 jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer in Charge.

M&L Vitrified Ceramic tiles 9-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.38 sqm,on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match colour of the tile complete all as specified and as directed by Engineer in Charge.

M & L coloured non skid ceramic joint free tiles 400x400x 7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved complete all as specified and as directed by Engineer in Charge.

M & L coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exc 0.06 Sqm but n exc 0.11 Sqm, in vertical surface as in skirting over & including 10 mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as approved complete all as specified and as directed by Engineer in Charge.

S&F in repairs 300 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F in repairs Brass barrel tower bolts 300 mm long, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F in repairs 150 mm long Extruded brass handles, fabricated type polished complete all as specified and as directed

S & F in repair PVC Venetian blinds of any size and any type (Horizontal/ vertical/roller/Zebra type) Blinds complete all as specified and as directed.

M&L for taking out shutters of Aluminium door any desc from frame and refixing in position after repair including change of rubber neoprene packing, changing hinnges, beadings and other connected items all as per engineer in charges instruction.

S&F in repairs Brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and as directed.

S&F in repairs 300mm long, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F 18 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side decorative as in Sink/ Wash Basin cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of REHAU or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as specified and directed.

S & F 8 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side un decorative as in back of kitchen cabinets complete all as specified and directed..

S & F auto close hinges , stainless steel of grade SS-304 , bright finish fixed complete all as specified and directed. (Make : Hettich or equivalent).

S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed.

Disconnecting existing PVC water storage tank of capacity exc 500 ltrs & not exc1000 Ltrs, setting aside (or lowering if required) for repairs. cleaning, etc and hoisting if required reconnecting and refixing in position complete all as specified and directed.

M&L for complete removal of existing roof treatment any type to make surface ready to receive new roof treatment all as specified and as directed

M&L screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes in roof mixed with water proofing compound @3% by weight of cement even and smooth without using extra cement. Note :- WPC shall be measured and paid seprately as supply Only.

M&L applying a coat of bituminious primer confirming to [email protected] Kg per Sqm ,APP BASED POLYMERIC Memberane not less than 3 mm thick. Weighing not less than 3 Kg/m2, reinforcd with polyster non woven febric(weighing not less than 15 Gm/Sqm) and upperside of memberane thermally insulated uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application all as directed.

M&L preparing new surfaces APP based polymeric membrane roof top exc 10cm width or girth and applying two coats of aluminium paint complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 (using 12.5mm size graded stone aggregates) padding in laid to average consolidated thickness of 40mm to provide a finished slope of 1:30 finished even and smoth without using extra cement complete all as specified and as directed.

Dismantling and removing from site wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and metalic frame

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

S& FAnodised aluminium snap grid frame work for false ceiling all as specified size of frame 605mm x 605mm complete all as specified and as directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S & F PVC Wall Lining (Panelling) consisting of min 5-7mm thick coloured or textured PVC sheet fixed to PVC fillet frame with screws inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing(PVC fillet shall be paid seprately) (including refixing of all fittings on the surface after the work) including taking down wall paneling complete all as specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Supply only integral waterproofing compound ISI marked complete all as specified and as directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

Rakesh Choudhary Contractor

S.R.Enterprises

J.J.ENGINEERING

UNIVERSAL INFRAPROJECT PVT LTD

ANKIT BUILDERS