Drilling 2 Nos of Bore well at various locations in Aircraft Division HAL BC

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Cancelled cheque leaf to be uploaded)

PAN No.:

Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs:

Please Enter Turn over in Rupees for all the 3 years

Details of Registered Contractor

ESI No.:

GST Detail:

Please Enter GST Details

Related Document to be uploaded in ePortal

Contact details

Please Enter Contact person Name

Please Enter Mobile No

Valid Electrical contractor license of appropriate voltage (Minimum 650V) issued by any state Govt. under clause 45 of Indian Electricity Rules 1956 or as amended from time to time

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued within a period 12 months from the final date of submission of tender.

Please Enter Details to 'Name of the Bank' , 'Date of Issue','Value in C89``Rs. in Lakhs

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender should be either of the following: [Work completion certificates along with LOA/PO/WO should be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender.

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No II

work done

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Please Enter Details for Work No III

Details of person holding the power of Attorney :

Related Document to be Uploaded to eProcurement Portal

Please Enter Details for Person holding Power of Attorney

DECLARATION I

Please Accept the Declaration I

DECLARATION II

Please Accept the Declaration II

Subject tender has been called on item rate basis. Basic Rate to be quoted for each item.

Subject work is a Works contract and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.

Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

The payment terms shall be governed as per the terms indicated in General conditions of contract.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

Specification of item

WATER SURVEY: Geophyacal investigation by vertical electrical sounding by adopting venner or schlumbergers method or any other sclentific or approved method including reconnaissance survey of geolocal formation, geophysical investigation of existing ground water in the vecinity, its quality & acceptability of the users indicating the location of site recommended depth of casing pipe required to seal the top unconolidated formation including an extra depth 1m in comsolidation formation for proper seating of casing pipe, depth of drilling required to over full depth aquifier proposed to be tapped, probable yield and other information required including transportation of instrument and accessories to work site engaging technical personal and labour reguired,etc complete as directed by EIC / OIC.

DRILLING BORE WELL: Sinking / Drilling of 160/165 mm dia borewell with necessary drilling plants and equipments (drilling rigs, Compressor etc.,) for the depth as specified below including Site clearance if required, drilling through various underground strata necessary underground blasting of rocks tests for quantity and analysis of under ground water for quality including transportation of plant equipment men and materials etc., all complete as per directed by the EIC / OIC.. Note: The Agency shall take reguired permissions of concerned Gverment Bodies (if reguired) and official fee will be pald by HAL

Depth of Drilling upto 0 to 250 foot)

Depth of Drilling upto (251 to 350 foot)

Depth of Drilling upto (351 to 450 foot)

Depth of Drilling upto (451 to 600 foot)

Depth of Drilling upto (601 to 750 foot)

Depth of Drilling upto (751 to 900 foot)

Depth of Drilling upto (901 to 1000 foot)

Supplying, Jointing and fixing in position to required depth Mild Steel casing pipe of dia 165 to 170mm, MS Collar heavy grade of 2.5 mm thickness of approved quality brand and manufacture, threading and joining the collar / jointing with proper welding alround, installing upto required depth, all complete as approved, specified and directed by EIC / OIC.. [MS Casing pipes and MS Collars contractors own supply and exposed portion will be painted with anticorrosive paint]

Supplying, Jointing and fixing in position to required depth 140mm dia UPVC casing pipes of heavy duty conforming to IS and to withstand a pressure of 16 KGF/Sq cms, of approved quality brand and manufacture, threading and joining with SS Nipple, clamp, installing upto required depth etc., all complete as approved, specified and directed by EIC / OIC.. HDPE pipe, SS Nipple, SS Clamp contractors own supply]

Supplying & jointing and fixing to required depth UPVC slotted / filter pipe (borewell pipe) 140mm dia and class II of ISI / approved quality threading and jointing to collare with chemical solution, inserting to required depth with necessary fittings and fixtures, etc., all complete as per site conditions and as directed bu EIC / OIC.

Supplying, Jointing & Fixing in position to depth upto 1000 feet 50mm dia UPVC submersible coloum pipe confirming to IS and to withstand a pressure of 16 Kgs/Sq cmtr of approved quality brand and manufacture, threading and jointing with SS nipple, clamp, installing upto required depth etc., all complete as approved, specified and by EIC / OIC. (SS Nipple, SS clamp contractors own supply)

Supplying & Installation, Testing & Commissioning of 7.5 Hp submersible pumpsets as detailed below, of texmo-aquatex / CRI / Kieloskar / Cromton make type 60HH 1016, upto 32 stage suiting in site conditions 3PH, 415V 50 Hz, 2880 RPM, 50mm cutlet, lowering along with pipe lines as per directions inclusive of cost of all materials, labour, tools and plants, taxes, conveyances etc., all complete a approved and as directed by the EIC / OIC.

Supplying & Installation, Testing & Commissioning of 3Hp Monoblock pumpsets 3 phase of texmo-aquatex / CRI / Kieloskar / Cromton, etc., all complete a approved and as directed by the EIC / OIC.

Supplying & Installation, Testing & Commissioning of 2Hp Monoblock pumpsets 3 phase of texmo-aquatex / CRI / Kieloskar / Cromton, etc., all complete a approved and as directed by the EIC / OIC.

Supplying & Installation, Testing & Commissioning of 1Hp Monoblock pumpsets single phase of texmo-aquatex / CRI / Kieloskar / Cromton, etc., all complete a approved and as directed by the EIC / OIC.

Providing, laying and fixinf 4 sg .mm 3 core copper conductor - OVC insulated flat cable without joint to suit to site, of approved brand and manufacture (FINOLEX/eguivalent) for the submersible pump sets includingcost of all materials, lobour, T & P, taxes, conveyances etc., all complete as approved, specified and directed byEIC / OIC.

Providing and fixing M.S. clamps made up to M.S. flats (50 x 10) mm - 20 Nos.with necessary boolts, nuts and washers and 165/170mm din MS bore well cap inclusive of cost of all materials, labours, tools & plant over and with one coat of yellow board zinc chromate primer preparation of surface etc., complete all as per approved design and as directed by the EIC / OIC.

Supplying, Fixing and Commissioning Havells or other HAL approved make 32 A TPN switch fuse in stainless steel enclosure enclosure operating voltage 415V, 3 Phase fixed on angle frame work etc., all complete as directed and as per the instructions of the Engineer-in-Charge.

Supplying, Fixing and Commissioning Havells or other HAL approved make 32 A Miniature Circuit Breaker [MCB] in stainless steel enclosure operating voltage 415V, 3 Phase etc., all complete as directed and as per the instructions of the Engineer-in-Charge. [HAVELL's / INDO KOPP OR APPROVED make]

Supplying and jointing medium grade 50mm dia 0.1 pipes with screwed ends including all necessary heavy quality 0.1 fittings such as bends, tees, elbows, couplings, reducers, unions, check nuts, plugs etc., jointing with teflon tapers, clamping, etc., painting with one coat of zinc chromate primer and two coats of first quality synthetic enamel paint of approved colour etc., all complete etc., all complete as directed and as per the instructions of the EIC / OIC.

Providing, installation, fixing and wiring outdoor panel board with Volt meter, Ammeter L & T starter, DOL contractor, over load relay, single phose preventor, Dry run pneventor, pilot lamps, re-wirable fuse carrier including complete internal wiring housed in a SS box with MS legs painted with antlcorrosive paint. Provision of the required space for fixing 3 phase electrical energy meter with a scsble locking door and Aerylic windows including providing & fixing 3 nos. fuse cutouts with porcelain base and termination of service mains cables etc., Providing and fixing fuse cut outs 3 nos. and 6mm thick Hyiam sheet for fixing electrical energy motor as per specifications. The entire untill shall be fixed in concrete concrete pedestal with necessary foundation bolts inclusive cost of all materials, labours, tools and plants, taxes, conveyanoes et., all complete as directed by EIC / OIC.

Supplying and fixing 50 mm dia Gun metal high pressure heavy duty Non Return valve of NETA make or approved make conforming to IS 14846 (Class I) fixed to GI pipe with all required GI Specials etc., all complete as directed and as per the instructions of the EIC / OIC.

Supplying and fixing 150mm dia MS Borewell clamp and cap with adjustable nuts, bolts, etc., all complete as directed by the EIC / OIC.