SPECIAL REPAIR TO BLDG NO T-13-15 BC (TOILET BLOCK), BLDG NO T-3 AND T-4 (STORES), DRAINAGE AND PATHWAY UNDER AGE B/R-II NASIRABAD

Amount

Taking down plaster on wall /ceiling of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in cement plaster 1:6 on stone masonary wall surfaces, finished even and smooth without using extra cement, complete all as specified & directed.

M&L for 15 mm thick rendering in cement plaster 1:4 on stone masonary wall surfaces, finished even and smooth without using extra cement, complete, all as specified & directed.

M&L for 15 mm thick rendering in cement plaster 1:6 on fair faces of brick or concrete masonary wall surfaces, finished even and smooth without using extra cement, complete, all as specified & directed.

M&L for 10 mm thick rendering in cement plaster 1:4 on fair faces of brick or concrete masonary wall surfaces finished even and smooth without using extra cement, complete all as specified & directed.

M&L for 15 mm thick rendering in cement plaster 1:4 on fair faces of brick or concrete masonary wall surfaces finished even and smooth without using extra cement, complete all as specified & directed.

M&L for 15 mm thick rendering in cement plaster 1:4 mixed with water proofing compound as per manufacturer's instructions on fair faces of brick or concrete masonary wall surfaces finished even and smooth without using extra cement, complete all as specified & directed.

Supply only water proofing compound complete all as specified & directed.

M&L for 5mm thick rendering in cement plaster (1:3) on ceiling surfaces finished even and smooth without using extra cement, complete all as specified & directed.

M&L for rough cast plaster over & including 10mm thick rendering in CM 1:3 on fair faces of brick or concrete masonary wall surfaces complete all as specified & directed.

M & L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

All as per above item No 11.00 here in before but on ceiling surfaces.

M & L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint complete, all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling and applying two coat of white wash complete, all as specified and directed.

Demolition of stone/brick masonry built in cement or cement lime mortar complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling or mass concrete complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed, well bonded, bedded & solidly hearted, built in CM (1:6) complete all as specified and directed.

All as per sl item no 17.00 here in before but except stone. NOTE: Old serviceable stones retrieved vide Sl Item no 15.00 shall be reused.

Extra over stone walling of random rubble, uncoursed for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 20mm complete all as specified and directed.

M & L for brick work of fly ash bricks of old size built in CM (1:6) straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping, bed block etc including weathering slightly, rounded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed.

Demolition of cement concrete (unreinforced/ reinforced) in any position & of any description not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in surface channel and drain etc. complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, metered /stopped ends etc complete all as specified and directed.

S & F mild steel framed bracket of angle or Tee conforming to Fe-290 Gde E-165 on top of drain for fixing of draincover complete all as specified & directed.

Dismantling stone slab in roofs, suspended floors, chhajja, landing etc any thickness, jointed in any mortar & M&L for sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc n.exc 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed

Dismantling stone slab in floors of any description and any thickness, laid, bedded and pointed in any mortar complete all as specified & directed.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) & 25mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size exc 0.11 Sqm but not exc 0.18 Sqm, 6-7 mm thick, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles on vertical surfaces of wall such as dados, skirting etc over & including 10 mm thick screed plaster in CM 1:4 on stone masonry wall surfaces complete all as specified and directed by Engineer-in-charge.

M&L for machine cut Kota stone slab flooring of size 550mm x 550mm 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over & including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for Kota stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick in CM (1:4) complete all as specified & directed.

M & L for hard core of broken stones n exc 63 mm in size & deposited & spread & levelled & watered complete all as specified and directed

M&L for 50mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection, finished fair and even without using extra cement and laid down in alternate bays not exc 2 m in length and making joint 12 mm wide in full depth of PCC and filling the same with bitumen and sand 1:3, complete, all as specified and directed.

M&L 16-18mm thick black/ colour granite on kitchen platform and similar work (size not less than 900 x 450mm over and inlcuidng 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the sande of granite stone including cutting and polishing complete complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed.

M & L for machine pressed precast concrete interlocking tiles, reflective type, in path 60 mm thick, ISI marked, M-35 grade of approved quality laid over & including 25 mm sand cusion vibrated with mechinical vibrator complete all as specified and directed.

M&L for precast PCC (1:2:4) type B-1 using20mm graded stone aggregate as on kerb stone on side of path , set in CM (1:4) incuding necessary excavation & earth work complete all as specified and directed.

M & L for preparation of new concrete surfaces of walls over 10 cm width or girth and applying two coats of synthetic enamel paint (Ist quality) over one coat of priming paint plaster coat complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and refixing in the same opening including cutting & adjusting to size if required and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.50 sqm each and refixing in the same opening including cutting & adjusting to size if required and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed.

M & L for rolled mild steel work angle iron as in door frame (Chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 (Gde E-165) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed

S & F hold fast of flat iron 25x6mm conforming to Fe- 290 (Gde E-165) including preparing the surfaces & treated with coaltar & sanded with clean sharp sand complete all as specified & directed

S&F for solid PVC door frame of size 75mmx45mm x 47mm made out of 5mm prelam colour sheet PVC Sheet reinforced with M.S square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S & F second class HW Hollock/Bansum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned & chemically pressure treated complete all as per specified and directed.

S & F second class HW Hollock/Bansum/Sal, 35 mm thick, glazed and skeleton shutters, factory made open rebated (Three panels)and prepare to receive glass, gauge etc with out sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 1991 Part-I, section 8 clause Member shall be kiln seasoned & chemically pressure treated complete all as specified and directed.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2 raised panel design with 2mm thick moulded prelam coloured PVC sheet on front face & 2mm thick prelam coloured PVC sheet on back face and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part - II) 2010 complete all as specified and directed. Note :- Cadmium screws to be used for fixing and fixtures.

Taking out old unserviceable steel window / ventilator & S & F steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters including box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.60mm thick MS hollow pipe including guard bars and necessary cooler arrangement in window complete all as shown in drg No. CEBZ/TD/14/11 sh No 1/7 to 7/7, specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed

S & F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm complete all as specified and directed.

S&F stainless steel butt hinges, ISI marked of size 100 mm complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S & F aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

S & F mild steel sliding door bolts ISI marked plate type 300 mm long stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed.

S & F IInd class hard wood (Hollock) small fittings such as brackets of any type latch and hinge blocks shaped door and window stops and the like including all necessary labour articles not exc 200 cucm each, including 50mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed

M&L for preparing the new wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer complete all as specified & directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer complete all as specified.

Taking down existing unserviceable treatment of any description including cement plaster/cement concrete of any thickness from roof surface cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 50mtrs complete all as specified and directed.

M & L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in levelling course/padding on top of stone patti roof complete all as specified and directed.

M & L for water proofing treatment on roof surfaces with APP modified membrane with non woven polyester reinforced, weight not less than 3 KG/SQM and thickness of membrane not less than 3 mm having thermal insulation with white mineral /gravel finish on upper side of membrane uniformly embedded during manufacturing process laid in following sequence, complete all as specified and directed:- (a) Applying 10 mm thick plaster in CM 1: 4 mixed with and incl water proofing compound @ 3% by weight of cement on cleaned roof surface. After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for 7 days for any seepage / leakage etc. if any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5 Kg / Sqm using cement based cement grout. After the roof surface is repaired the slab / roof will be again tested for water tightness against before processing further treatment. (b) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc. for all foreign matters such as fungus, moss, dust. etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets / pipes/ chimney pipes and other similar situations to tuck in the treatment.

(c) Applying a coat of bituminous primer conforming to IS 3384-1965 @ 0.3 Kg / Sqm on the prepared surface till the surface is properly impregnated. (d) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method. (e) All joints and changes in direction should be curved with cement mortar 1: 3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1: 2: 4 types BO using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction. (f) Topping will be done with precast machine pressed 20-22mm thick PCC tiles (using gray cement) of size 250 x 250 mm or 300 x 300 mm, conforming to IS - 1237 (hydraulically pressed), laid over 15 mm thick cement mortar screed in CM (1: 4), set & jointed in neat cement, joints of tiles shall be 2-3mm wide and grouted with chemical tile grout "of M/S Asian Paints or equivalent as approved by GE. Note:- (i ) Work of water proofing treatment shall be carried out by the authorized applicant of the manufacture. Necessary documentary evidence in support of the authorized applicant will be submitted to GE before the commencement of water proofing work. (Ii) The quoted rates is understood to include for the cost of scaffolding, T & P, etc required for execution of the work.

M&L for coved fillet in PCC 1:2:4, type B0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces 75mm radius and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @ 0.40 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr/Sqm complete, all as specified & directed. all as specified & directed.

Dismantling existing unserviceable, PVC / RCC water tank of capacity n.exc 500 litre each & removing from site complete all as specified and directed.

Dismantling existing unserviceable, PVC / RCC water tank of capacity exc. 500 litre but n.exc 1000 litre each & removing from site complete all as specified and directed.

S & F for rotational moulded polyethylene (HDPE) water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted, double layered, ISI marked hoisted and fixed in position complete all as specified and directed.

S & F for rotational moulded polyethylene water storage tanks of 1000Ltrs capacity (cylindrical vertical with closed top), double layered, ISI marked hoisted and fixed in position complete all as specified and directed.

S & F ball valves high pressure and of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm bore minimum weight 210 gms complete all as specified and directed.

Taking up or down steel tubing and connection 15mm bore keeping aside for reuse or removing to store complete all as specified and directed.

All as per item No.71.00 here-in-before but 20mm dia

All as per item No. 71.00 here-in-before but 25mm dia

Supply and fix mild steel water tubing 15 mm boregalvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.

All as per item No. 74.00 here-in-before but 20mm bore pipe.

All as per item No. 74.00 here-in-before but 25mm bore pipe.

M & L for refixing only 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed.

All as per item No. 77.00 here-in-before but 20mm bore pipe.

All as per item No. 77.00 here-in-before but 25mm bore pipe.

S&F 15mm bore, fancy type bib tap of cast copper alloy,chromium plated, screwed for iron pipe or for brass ferrule, complete, all as specified & directed. Make: Pryag, Cat Part No. 9208 or equivalent from specified make in PS as approved by GE.

S&F 15mm bore concealed valve, fancy type, cast copper alloy, chromium plated with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete, all as specified & directed. Make: Pryag, Cat Part No. 9218/9220 or equivalent from specified make in PS as approved by GE.

S & F stop/angle valve, 15mm bore, cast copper alloy fancy type, chromium plated, screwed both ends for iron pipes or for unions, complete all as specified and directed. Make: Pryag, Cat Part No. 9210 or equivalent from specified make in PS as approved by GE.

S&F 15mm bore capston headed pillar tap, fancy type, cast copper alloy, chromium plated, screwed both ends for iron pipe or for unions, complete all as specified & directed. Make: Pryag, Cat Part No. 8502 or equivalent from specified make in PS as approved by GE.

Taking out old unserviceable tubular towel rail & S&F tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as specified & directed.

S&F in repair brass chromium plated shower rose of 125 mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F in repair gun metal high pressure globe or gate valve with iron wheel head screwed both ends for iron pipes of 20mm bore and fixed complete all as specified & directed.

S&F in repair gun metal high pressure globe or gate valve with iron wheel head screwed both ends for iron pipes of 25mm bore and fixed complete all as specified & directed.

Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with chinaware ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed.

Taking out old unserviceable wash down water closet and S & F vitreous china wash down water closet pan (pedestal pattern), white, including plastic cover white closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe etc complete all as specified and directed.

Taking down old unserviceable WHB and S&F wash hand basin vitreous china colour flat size 550 x 400mm complete all as specified and directed

Taking down old unserviceable flushing cistern S&F PVC valve less syphonic action type low level flushing cistern, 10 Ltrs capacity, white, with inlet ball valve, float and handle fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

Taking down CI soil, waste and vent pipe 100mm bore size set in CM from walls/trenches complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, laid in trenches or in floors complete all as specified and directed.

All as per item No. 94 here-in-before but 75mm bore PVC (SWR) pipe

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. complete all as specifed and directed.

S&F PVC (SWR) 110 mm single juction (Single T) (equal or unequal) complete all as spd and directed.

S&F PVC (SWR) 75 mm single juction (Single T) (equal or unequal) complete all as spd and directed.

S&F PVC (SWR) 110 mm vent cowl complete all as spd and directed.

S&F in repairs PVC floor trap 75 mm outlet with grating including jointing with solvent cement complete all as specified and directed.

Excavation in trenches in hard/dense soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc of 25 cm thick in any type of soil complete all as specified and directed.

Removal of surplus soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landing, cover slabs, shelves and manhole cover complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) perforated as in as in drain cover, complete all as specified and directed.

M&L mild steel TMT bars in reinforcement 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends , and binding with and including binding mild steel wire(annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L mild steel TMT bars in reinforcement 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends , and binding with and including binding mild steel wire(annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Demolition & breaking up 150mm bore drain pipes (SGSW) set in cement mortar and removing from site all as directed

M & L for PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in bed of drain pipe of 150mm dia (nominal) including packing under and haunching against the size of after they are laid and tested complete all as specified and directed.

M & L for 150 mm bore RCC class NP-2 drain pipe with collar, ISI Marked laid in trenches and jointed in CM (1:1) tested complete all as specified & directed.

M & L for 150 mm bore salt glazed stone ware drain pipe ISI Marked laid in trenches and jointed in CM (1:1) tested complete all as specified & directed.

M & L for 300mm bore RCC class NP-2 drain pipe with coller, ISI marked, laid in trenches and jointed in CM 1:1 including 100mm thick bedding of PCC 1:4:8 type D2 using 40mm graded stone aggregate, including testing complete, all as specified & directed.

M & L for 450 mm bore RCC class NP-2 drain pipe with coller, ISI marked, laid in trenches and jointed in CM 1:1 including 100mm thick bedding of PCC 1:4:8 type D2 using 40mm graded stone aggregate, including testing complete, all as specified & directed.

M & L for brick work with ' fly ash ash brick, straight or curved on plan to any radius in half brick thick built in CM 1:4, complete, all as specified & directed.

Taking down carefully copper / aluminium point wiring complete with concealed/surface conduit/casing caping wiring including fitting and fixtures such as switches, sockets, holders, ceiling rose, regulators, light fittings, tube light fittings etc removing from site and making good the disturbed surface of walls/ceiling etc complete all as specified and directed.

Disconnecting electric connections and taking down old unserviceable MCB SPN/SP/TP and DB's of any capacity and removing from site complete all as specified and directed.

M & L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts grade drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher with all PVC conduit accessories with suitable size of sunk type pressed steel terminal box concealed in wall, with PVC laminated sheet top cover 3mm thick with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cable connected to common earth dolly for the following complete all as specified and directed:-

One light point point controlled by one, one-way 5 Amps

One fan point controlled by one, one-way 5 Amps

One 3/5 pin 5 Amps socket outlet on same board with other switch

One 3/5 Pin 5 Amps socket outlet on independent board

All as per item No 117 here-in-before but 2.5sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts incuding 2.5sqmm stranded copper conductor (FRLS) PVC insulated greeen in colour as continous earth conductor connected to common earth and earth dolly with all accessories for one 5 pin 5/15 Amp socket on independent board complete all as specified and directed.

S&F switch piano type, flush button, single pole, one way, 5 Amps complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F switch piano type, flush button, single pole, one way, 15 Amps complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F socket outlet 5 Amps, 5 pin, flush type, complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F socket outlet 15 Amps, 2 in1 , 3/5 pin, flush type, complete all as specified and directed. Make : CONA / SSK / HAVELLS

S & F stepped type electronic ceiling fan regulator, flush type, AC 230 volts complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F ceiling rose, surface bakelite 65 x 17.5mm, three terminal complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F batten lamp holder PVC/polycarbonate type with back plate suitable for batten complete all as specified and directed. Make : CONA / SSK / HAVELLS

S & F LED tube light fitting retrofit batten in acrylic linear tube (1x18 watt), 230 V for single LED tube light including 1x18 W LED retrofit bar professional CW 6500 K cover channel, bipin holder, LED power driver, connector block, etc complete with all accessories internally prewired and incuding connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make : Bajaj Cat part No BLRB 18 W CWc for tube & BLRB - DB 118 for batten, Havells cat part No PHOTONULTRA1213T8LLSSTL18WLED865SPC for tube & REGALBATTENT8UPTO1X18WDSBSWH for batten, Surya cat part No STETL-DS 18 PC REFORM for tube & SUB1 18T8LED for batten.

S & F LED light fittings, suitable for & including 1x10 watt bulk head luminaries with connector block etc complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz complete all as specified and directed. Make :- Bajaj Cat No : BIBWP 10W LED, Havells cat part No LHEOAP7UZ6W010 or equivalent make of JAQUAR/CROMPTON.

S & F LED mirror light fitting, suitable for & including 1 x 10 watt LED luminaire, attractive wall/ ceiling mounted type with metallic channel and white reflector, suitable for mirror fittings with complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Bajaj Cat Part No BCLSB 10 WH or equivalent model from Havells.

Supply fixing testing and commissioning of energy saving street light luminiare suitable for & including 15watt LED, pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate cover, complete with individual LED lenses including street light bracket made of 32mm bore GI pipe, medium grade, 1.2mtr long fixed with 02 No of suitable size of clamps, nuts & bolts and fixing on wall complete all as specified and directed. Make :- Bajaj Cat Part No BCLST 15W LED, Jaquar Cat Part No LSRT01S016XC or equivalent model of Surya.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Make:Legrand/Siemens/Schneider Note : MCB DB and MCB will be of same make.

S&F MCB single pole 240 volt 10KA, 6 to 32 Amps conforming to IS 8828 of 1996 curve 'C' complete all as specified & directed. MAKE: LEGRAND (DX-3), SCHNEIDER (ACTI-09), SIEMENS (BETAGARD)

S&F MCB single pole and neutral 240 volt 10 KA, 10 to 40 Amps conforming to IS 8828 of 1996 curve 'C' complete all as specified & directed. MAKE: LEGRAND (DX-3), SCHNEIDER (ACTI-09), SIEMENS (BETAGARD)

M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6.00mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 5 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15mm dia medium grade GI pipe and watering pipe shall be 20mm bore, medium grade including excavation & earth work in any type of soil & disposal of sil chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover, reinforced with 8mm TMT bars 100mm C/C both ways with handle made out of 8mm dia bars, watering arrangement with funnel and wire mesh completed all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.

Supply, laying, jointing and testing of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10sqmm, 2 core complete all as specified and directed. Note :- Excavation, earth work, sand cushoning and cable cover will be measured and paid separately.

M & L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables complete all as specified and directed. Note :- For the purpose of payment only punned thickness will be measured.

M & L for old size sub class 'B' bricks straight or curved on plan exc. 6 mtr mean radius for cable cover laid flat adjoining to each other width wise complete all as specified and directed.

S & F GI pipe light grade for cable protection of size 40mm dia laid in trenches/ducts or fixed to pole/wall including necessary fixing arrangements with clamp of suitable sizes complete all as specified and directed.

Taking down existing ceiling fan, dismantling blades, cleaning the fan & blades, fixing blades & refixing ceiling fan in position incuding connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

M/S Nexus Projects

M/s SUNIL ENTERPRISES

M/s Jai Jinendra Constructions

M/S JAGDISH PRASAD AIRUN

M/S Bansal Construction

MITTAL ENTERPRISES