WBPHED/EE/AMD/ NIeT-43 of 2024-2025/3

Amount

Supply of 3 Core X 10 Sqmm Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC. (Make:- Approved in vendor list.) (Test Certificate is to be submitted at the time of delivery.)

Laying of one No. cable 3 Core X 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.(From RBTW to Pump House)

Straigh through Jointing of cable of 3 Core X 10 sqmm by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC)

80 mm dia P.N.-1.0, Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, Spindle of IS 6603, Gr-12 cr-13, spindle nut & seat rings are of Gunmetal as per IS:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10 kg/sqcm (seat test) and body tested to 15 kg/sqcm, All the valves should be tested by closed end method only.(Make-Approved Make)

Fitting, fixing of 80 mm dia non-rising type sluice valve in existing line with supplied flanges, nuts, bolts and rubber gasket etc, cutting of MS delivery pipe then welded with the flanges, next placing above supplied valve also tightened the nuts all complete as per direction.

Withdrawing of 15.00 HP sub. p/m from outside tubewell including submersible cable, rope & column pipe part by part after disconnection of power line & delivery pipeline as directed (including Derrick arrangement cost on hiriing basis)

Anti snapping safety device for pump set by supplying suitable size or MS angle busket and nylon rope of required length including supplying of Nuts,bolts and all other materials.

Lowering of same 15 HP S/M P/M set into the ground bored tubewell, with rope and column pipe atfirst put into the cage, part by part also doing necessary power connection, and making interconnection of ddedlivery line as per direction of EIC.

Supply of 3.5 Core X 25 Sqmm Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC. (Make-Approved Make) (From WBSEDCL End to Panel Incomer)

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 3.5 Core X 25 Sqmm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :3.5 Core X 25 Sqmm.

Polypropylene make moulded chair.(Make-Approved Make)

Polypropylene make moulded table.(Make-Approved Make)

Add GST @ 18%

Add CESS @ 1%

V P Concern (BID ID -6242563)

PESTCO INDIA (BID ID -6231768)