TE-97/2021-22

Amount

Recovery of brick/tile bats

Dismantling of brick work in cement sand mortar / lime mortar including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material. & staking the serviceable material with all lifts & lead of 100 metre (By Mechanical Means).

Dismantling RCC

Dismantling cement conglomerate floors (25mm to 50mm) thick without concrete base.

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. For Doors of area 3 sqm and below.

Doors of area 3 sqm and below.

Windows of area 3 sqm and below

Scraping of White wash and colour wash

Scraping of cement plaster

Cement concrete 1:2:4

Reinforced cement concrete M-20

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 2.5 kgf./sqm

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Conglomerate floor 40mm thick cement concrete topping 1:2:4.

Providing and laying vitrified floor tiles in different sizes laid on 20mm thick cement mortar 1:4 complete size 600x600 mm

12.5mm thick cement plaster 1:4

Plastering on underside of ceiling 10 mm thick cement plaster 1:3

Cement pointing 1:3 deep variety

Painting two or more coats with synthetic enamel paints in all shades on old wood work

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)

Painting with acid proof paint of approved brand and manufacture to give an even shade two or more coats

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete.

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect 5mm thick or 10.78 kg/sqm

Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete Iron helical spring

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete ISI designation no I

Providing and fixing aluminum work for doors, windows, ventilators and partitions For fixed portion

Providing and fixing aluminum work for doors, windows, ventilators and partitions For shutters of doors, windows & ventilators

Providing and fixing 12mm thick prelaminated particle board flat pressed

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. 5 mm thickness for windows

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300mm x 16mm

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250mm x 16mm

Cold twisted detormed (Ribbed/ Tor steel) Bars Fe 500 grade

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make

Providing and fixing in position vitreous chinaware white lavatory suites.Size 450mmx300mm

Providing & Fixing in postion 15 mm i/d bib cock of best quality C.P. brass Bib cock long nose/long body.

Providing & Fixing in postion 15 mm i/d bib cock of best quality C.P. brass Bib cock without flange.

Providing and fixing in position premium range C.P. Brass Fittings and accessories C.P.brass 15mm Angular stop cock with Wall flange.

Providing & fixing in position best Indian make PVC flexible tube connection. 15 mm x 300 mm

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Fan Box andElectronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-

Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1. sq. mm, 1100volts grade with step type electronic fan regulator 100watts (two module).

Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.

Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade.

Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs.

MCB Single Pole 6-32amp

MCB Double Pole 6-32amp

Supply and fixing general purpose tube fitting of crompton make on wall 1x36w

Supply and fixing Exhaust fan 18" sweep of crompton make including louver

Supply and fixing Exhaust fan 12" sweep of crompton make including louver

Recovery of bricks

Extra for tiles for regrading

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm

Recovery of steel scrap

Recovery of fuel wood

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba

Cement concrete 1:5:10

Providing and fixing 1st quality ceramic glazed wall tiles

Providing and laying Anti skid Ceramic floor tiles 12.5mm thick cement plaster 1:3 in base

Extra Carriage

Cement

Fine sand

Steel

Landing of rates

Coarse aggregates 13.2 mm

Coarse aggregates 11.2 mm

Coarse sand

Coarse aggregates 40 mm

Bricks

M/S H.S. CONSTRUCTIONS, BATHINDA

THE GURUSAR JODHA L and C CO OP SOCIETY LTD.