HERITAGE WORK - JDRO

Excavation up to 1.5 — Excavation for foundation upto required depth below existing ground level up to 1.5m in any type of soil except hard rock. Rate to include dressing the sides and bottom, bailing out of water if encountered, shoring, strutting, backfilling after the construction of foundation, trenches/plinth beam etccompacting by the side of the foundation and disposal of surplus excavated earth within/outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including spreading, watering and compaction, complete. The measurement of the excavation would be based on actual depth of excavation with applicable rate for different depths

PCC 1:3:6 — Providing and laying PCC 1:3:6 using 20 mm and down sizegraded stone aggregates including machine mixing, providingformwork if required, placing, compacting by hand ramming,curing etc complete.

BRICK MASONRY SUBSTR — Providing and constructing following brick masonry in CM1:5 using first quality bricks of Class designation 35 (35KG / SQCM minimum) and conforming to IS- 1077-1986 includingproviding all openings and projections , raking the jointsto 1 cm deep, scaffolding, soaking of bricks in water priorto use and curing etc complete as per specifications . ForSubstructure below plinth level

20 MM Plaster — Providing and laying 20 mm thick smooth cement plasteringin 1:4 CM in single coat to all the interior wallsincluding providing necessary scaffolding, chicken wiremesh at all joints of brick and concrete surfaces with aminimum overlap of 150 mm in all directions and additionalthickness if required to achieve perfect line and level,groove cutting without any extra cost.

ACRYLIC EMULSION PNT — """ACRYLIC EMULSION PAINT (EXTERIOR GRADE) PROVIDING ANDAPPLYING 3 COATS OF ACRYLIC ANTI FUNGAL CEMENT PAINTINCLUDING PRIMER OF APPROVED MAKE & SHADE TO ALL THEEXTERIOR SURFACES AS PER MANUFACTURER'S SPECIFICATIONSINCLUDING PROVIDING NECESSARY SCAFFOLDING, CURING , ETC.COMPLETE. IF ADDITIONAL COATS ARE REQUIRED TO OBTAINUNIFORM FINISH, THE SAME SHALL BE CARRIED OUT AT NOEXTRA,COST AS DIRECTED BY ENGINEER IN CHARGE. GENERALSPECIFICATIONS/GUIDELINES GIVEN UNDER WHITEWASHITEM ALSOTO BE FOLLOWED, AS APPLICABLE."""""""

PLASTIC EMULSN PAINT — """PLASTIC EMULSION PAINT: PROVIDING AND APPLYING 2 COATS (FIRST COAT WITH BRUSH AND FINAL COAT WITH ROLLER) OFPLASTICEMULSION PAINT OF APPROVED MAKE AND SHADE ON ALLSURFACES AND HEIGHTS TO GIVE AN EVEN SHADE INCLUDING PRIMERANDCOMPATIBLE PUTTY. APPROVED MAKE: ASIAN/NITCO / NEROLAC.GENERAL SPECIFICATIONS/GUIDELINES GIVEN UNDER WHITEWASHITEMALSO TO BE FOLLOWED, AS APPLICABLE. """""""

100x100 Precast Cement Pillar — """Providing and fixing of 100x100x1200 mm Precast Cementedpillar of mix 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 6mm nominal size) reinforced with 1.6 mmdia mild steel wire with all carved detail inculding postand base, as per approved architectural drawing/view,designed for supporting jali or any other works.The workincludes hand carving of decorative patterns, dressing,shaping, edge finishing, and polishing of exposed surfacesas per design/drawing.The work further includestransportation to site, loading/unloading, lifting,hoisting, scaffolding, and fixing in position overRCC/masonry base with cement mortar (1:4) or approvedadhesive/anchoring system, including proper alignment,leveling, grouting, curing, cleaning, and all complete asper drawing, specification, and direction of theEngineer-in-Charge.Measurement:Shall be measured innumber (Nos.) of finished items, complete as per approveddrawing/view."""

S&I of Cemented Decorative — Providing and fixing precast reinforced cement concrete 75mm wide (+-25mm) border with carving pattern of mix 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 6mmnominal size) reinforced with 1.6 mm dia mild steel wire,including positioning, fixing in position with cementmortar 1:3 (1 cement : 3 coarse sand), finishing smooth,and curing complete minumum thickness 25mm (Design shouldbe approved by EIC/Consultant)

S&I of Cemented 125 mm Wide — Providing and fixing precast reinforced cement concrete125 mm wide (+-25mm) border with carving pattern of mix1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate6mm nominal size) reinforced with 1.6 mm dia mild steelwire, including positioning, fixing in position with cementmortar 1:3 (1 cement : 3 coarse sand), finishing smooth,and curing complete minumum thickness 25mm (Design shouldbe approved by EIC/Consultant). Rates shall include Supply,transportation, Fixing, Chemicals, Clamps, scaffolding andanother required material. No extra payment will be madefor any material.

S&I of Cemented 175 mm Wide — Providing and fixing precast reinforced cement concrete175 mm wide (+-25mm) border with carving pattern of mix1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate6mm nominal size) reinforced with 1.6 mm dia mild steelwire, including positioning, fixing in position with cementmortar 1:3 (1 cement : 3 coarse sand), finishing smooth,and curing complete minumum thickness 25mm(Design shouldbe approved by EIC/Consultant). Rates shall include Supply,transportation, Fixing, Chemicals, Clamps, scaffolding andanother required material. No extra payment will be madefor any material.