Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LAccepted-AOC KANTHADHAR P O ICHAPORE NAWABGANJ DIST NORTH 24 PARGANAS PIN 743144 WB | ICHAPORE NAWABGANJ | NORTH 24 PARGANAS | WEST BENGAL | 743144 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹45.9 L+₹3.9 L (9.33%)Rejected-AOC 27 WESTERN STREET ROOM NO 307 KOLKATA 700012 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700012 | L2 | Rejected-AOC NOT L1 BIDDER | |
| 3 | L3₹46.1 L+₹4.1 L (9.86%)Rejected-AOC 35 P C MUKHERJEE STREET PO KONNAGAR DIST HOOGHLY PIN 712235 | KONNAGAR | HOOGHLY | WEST BENGAL | 712235 | L3 | Rejected-AOC NOT L1 BIDDER | |
| 4 | L4₹46.5 L+₹4.5 L (10.8%)Rejected-AOC | L4 | Rejected-AOC NOT L1 BIDDER | |
| 5 | L5₹46.7 L+₹4.8 L (11.3%)Rejected-AOC 87 MARIUM MAHAL SADAR BAZAR BARRACK PORE 24 NORTH PGS | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | L5 | Rejected-AOC NOT L1 BIDDER |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
6 Sept 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA, 46 BT ROAD, KOLKATA - 700050
SMART PERIODICAL SERVICES WORKS FOR 507 ABW AND MU CAMP AREA AT KANKINARA MIL STN UNDER GE (NORTH) KOLKATA
2024_MES_666989_1
8395/24-25/E8
Open Tender
Miscellaneous Works
Item Rate
210 days
507 ABW AND MU CAMP
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹88,000
Yes
28 Sept 2024
20 Jul 2024
9 Sept 2024
22 Jul 2024
6 Sept 2024
3 Aug 2024
Amount
Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vacuum based sanding machine,washing down, removal of nail etc & filling cracks/hole with putty, and applying Two coats of 100% Premium acrylic emulsion paint by spray machine on new plastered surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed. Note: (i) Guarantee of smart periodical will be 5 years.
Taking down cement plaster on brick or stone wals, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and directed.
Material and labour for rendering 20 mm thick cement plaster in cement mortar (1:4) in two layers, each 10mm thick, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall, finished the surface fair and even complete all as specified and as directed. Note: (WPC shall be measured and paid separately).
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint by spray machine on new plastered surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. Note: (i) Guarantee of smart periodical shall be 5 years.
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of wall by Vacuum based sanding machine, applying wall care putty 1 mm thick (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coat of emulsion distemper white or coloured by Auto Roller including one coat of primer complete all as specified and as directed and as per manufacturers instruction complete all as specified and directed.
Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vacuum based sanding machine, removal of nail etc & filling cracks/hole with putty,applying wall care putty 1mm thick (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller including one coat of primer complete all as specified and as directed and as per manufacturers instruction complete all as specified and directed.
Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vacuum based sanding machine, removal of nail etc & filling cracks/hole with putty,and applying two coats of emulsion distemper white or coloured by Auto Roller including one coat of primer complete all as specified and as directed and as per manufacturers instruction complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
Supply only integral water proofing liquid admixture for concrete and mortar complete all as specified and directed.
M&L for applying plaster of paris putty of 1 mm thickness to prepare the surface even and smooth complete all as specified and as directed.
Material and Labour for preparation of surface and applying one coat of synthetic enamel paint on old wooden surface exc 10 cm width or girth complete all as specified and as directed.
Material and Labour for preparation of old steel surface and applying one coat of synthetic enamel paint exc 10 cm width or girth complete all as specified and as directed.
Taking down/ dismantling loose/ damaged concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling, louvers, parapet, column, beam, and lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.
Demolition of reinforced concrete as in roofs, floors (other than ground floors), beams, staircases, landing, and similar suspended work (reinforcement cut as required to facilitate demolition) with necessary scaffolding and protection as required complete all as specified and as directed.
M&L for cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 15 & 16 here in before by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified and as directed.
M&L for two coats of “Epoxy zinc rich primer” as protective coat to exposed surfaces of old and new reinforcement over 10 mm dia as per manufacturer's instructions complete all as specified and as directed.
All as per item No.18 above but reinforcement upto 10mm dia complete all as specified and directed.
Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed.
Material and labour for TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.
Material and labour for TMT bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed.
Supply and fix in repair PVC (SWR) pipes 110 mm bore type 'A' single socketed in any length with rubber ring joint fixed to walls with and including PVC brackets complete all as specified and directed.
Supply and fix in repair PVC (SWR) bend/ shoe 110mm bore complete all as specified and directed.
Material and labour for providing reinforced cement concrete (1:1½: 3) type A1 (using 20mm graded stone aggregate) as in chajja, facia, railing and parapet complete all as specified and as directed. Note: Reinforcement and formwork shall be measured and paid separately.
Material and labour for providing reinforced cement concrete (1:1½: 3) type A0 (using 12.5mm graded stone aggregate) mixed with integral water proofing liquid admixture as per manufactures instructions as in columns, pillars, piers, posts and struts complete all as specified and as directed. Note: Reinforcement and formwork shall be measured and paid separately.
All as per item No. 26 above but in beams, lintel, cantilevers complete all as specified and directed.
All as per item No. 26 above but in slab, landing, balcony and similar items complete all as specified and directed.
All as per item No. 26 above but in chajja, facia, railing and parapet complete all as specified and directed.
M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.
M&L for use and waste of formwork to sides and soffits of beams, lintels, floors etc. for rough finished concrete surfaces complete all as specified and as directed.
M&L for use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.
M&L for use and waste of formwork to sides and soffits of chajja, troughs etc for rough finished concrete surfaces complete all as specified and as directed.
Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finishing the surface even and smooth without using extra cement complete all as specified and as directed
All as per item No. 34 above but in ceiling complete all as specified and directed.
M&L for chipping of existing plaster, area n. exc 1 sqm, removing weeds/ shrubs/ roots, treating the surface with chemical (sulphuric acid), plastering the surface in CM (1:4), 20 mm thick and finishing the surface to match the existing surface including necessary scaffolding/ support for working etc. complete all as specified and directed.
ELECTRO COMMERCIAL CO (BID ID -3080462)
M/S MAHENDRALALL DUTTA (BID ID -3083985)
M/s Anil Kumar Dutta (BID ID -3080685)
JHAWAR SUPPLIERS (BID ID -3083345)
DK DAS AND CO (BID ID -3084096)
RBS Builders (BID ID -3080108)
SHIVAM ENTERPRISE (BID ID -3087659)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .