GE(P) AF/GUR-22/2020-21

Amount

M&L for providing precast cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame (pre cast frame shall be measured separately) set in CM 1:4 incl dismantling complete all as specified and directed by Engr-in-Charge.

M&L for 8 mm dia TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

All as per item No 02 here-in-before but as in stirrups/binders complete all as specified and as directed by Engr-in-Charge.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) finished even and fair complete all as specified and as directed by Engr-in-Charge.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 15 cm wide, finished even and fair complete all as specified and as directed by Engr-in-Charge.

M&L for reinforced cement concrete (nominal mix) type B-1 1:1.5:3 (using for 20 mm thick crushed stone aggregate) in slabs supported on walls, bends, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed by Engr-in-Charge.

Demolition of RCC as in slab, beam, chajja (other than ground floor) beams staircases,and similar complete all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete (nominal mix) type B-1 1:1.5:3 (using for 20 mm thick crushed stone aggregate) as in chajjas and similar works complete all as specified and directed by Engr-in-Charge.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges, finished even and fair complete all as specified and as directed by Engr-in-Charge.

M&L for aluminium sheet 0.5 mm with aluminium alloy finish screw fixed with SS screws to door shutters and similar work etc all as specified and as directed by Engr-in-Charge.

M&L for applying evenly primer @ 0.3 ltr/Sqm and provn of APP based polymeric membrane, 3mm thick weight not less than 3.6 kg/sqm reinforced with polyester non woven fabric membrane with end laps of the 10cm and side over laps of 7.5cm and sealing all overlaps & joints , complete fixing membrane with thermofused the LPG flame and tack coat of industrial bitumen 85/25 ISI marked @ 1.2 kg/Sqm over clean plastered surfaces inlcuding taking down existing treatment and earthing arrester etc and after complitation of work earthing arrester are re-fixing in the same position and other similar works and complete all as specified & directed by Engr -in - Charge. Make :HYPERPLUS POLYSTER-IWL INDIA LTD , MOPLY FP-STP TEXSA LTD, HYDROSTOP-TIKITAR INDUSTRIES & POLYMOD AP-CHOKSEY CHEMICAL PVT LTD., TORCHRAR.

M&L for Applying two coat Bitumen water proofing aluminium heat resistance paint on the roof as per manufacture instructions complete all as specified and directed by Engr-in-Charge. Make : PLASCON/PLASCON or equalant

Demolition in cement concrete in any description and any position not other wise specified and provided as in ground floor and paving n.exc. 15 cm thickness (below above ground floor) all as directed by Engr-in-Charge.

Dismantling of wall/ floor tile including backing coat any description or any thickness led beded and pointed in any cement motar and removal to out of MD land all as specified and directed by Engr-in-Charge.

Taking down cement Plaster, any description on Brick Walls or on concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed.

Dismantling of brick work built in cement mortar including all qoins, arches, pillars, etc.complete all as specified and as directed by Engr-in-charge.

M&L for Brick work with old size sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

All as per srl item No. 17 here in before but except bricks. Note:- Serviceable bricks obatined from srl item No. 16 shall be re-used in srl item No. 6 after cleaning etc complete all as specified and directed by Engr-in-Charge.

M&L for glossy chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with white cement and pigments in any colour machine preassed glazed , over cement screed bed 15mm thick cement motor 1:6 complete all as specified and as directed by Engr-in-charge.

M&L for glazed ceramic coloured designer concept tiles matching with existing tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete all as specified and as directed by Engr-in-Charge.

M&L for non skid ceramic coloured tile 7 to 8mm thick (square/rectangular area of each tiles exceeding 0.11 Square but not exceeding 0.18 Sqm in floor over 10mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the tile complete all as specified and as directed by Engr-in-Charge.

M&L for 16 to 18 mm thick granite (any type) machine cut, table rubbed with granite finish laid over cement screed bed 15 mm thick in cm 1:6 and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including mirror polishing and bull nosing edging in any position etc complete all as directed by Engr-in-Charge.

M&L for 20-22 mm thick machine cut Kota stone slab 550mm x 550mm size, flooring over cement screed bed 15mm thick in CM 1:6 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror type polishing complete all as directed by Engr-in-Charge.

M&L for providing 100mm thick cement concrete 1:4:8 type D-2 using 40mm graded aggregate in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L 75 mm thick in cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in Plinth protection finished even and smooth w/o using extra cement including 10mm wide groove in every 3Mtr or at turning point including bitumen mastic filling complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in as in copping cill ,rounded or chamffered on edges including necessary form work complete as directed by Engr-in-Charge.

M&L for cement concrete type D-2 1:4:8 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed by Engr-in-charge.

M&L for for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces other than fair face of brick work, finished fair & even w/o using extra cement in patches with water proofing compound(water proofing compound paid sepratelly in item) all as specified and directed by Engr-in-Charge.

M&L for rendering 10 mm thick in CM 1:3 on or concrete surfaces as ceiling , finished fair & even w/o using extra cement complete all as specified and all as directed by Engr-in-Charge.

M&L preparetion of new plastered surface and applying two coat of weather proof exterior grade acrylic emulsion over a coat of primer including necessary scaffolding complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing Newly Plastered Surfaces of WALLS and applying Three COATS of WHITE WASHING, complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparing New Plastered Surfaces of WALLS and applying TWO COATS of DISTEMPER OIL EMULSION (OIL BOUND WASHABLE DISTEMPER) over one coat of primer over a Coat of CHALK WHITING, complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation new steel surface exc 10 cm width/girth one coat red oxide primer and two coat synthetic enamal paint complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for Complete removal of existing treatment upto plastered surfaces including preparation of surfaces of walls and cornices and applying two coat of exterior cement base paint over one coat of cement base putty complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old painted concrete/cement plastered surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

S&F 0.5 mm thick pre coated thick galvalume aluminium zink coated GI based corrougated or curved shape steel sheeting of any colour having tansile strength of 550 MPA as in roof covering/glading to wall fixed with self tapping screws, includng dismantling old sheeting complete all as specified and directed by Engr-in-Charge.

S&F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed wire 2mm barbs at 75mm spacing & staraining fixing to any typoe of standard rails, straining bolts incl securing and tying at crossing with and provn of galvanised mild steel wire, stapels or steel pins etc as directed (each line wire to measured) complete all as specified and directed by Engr-in-Charge.

S&F in repair 950 mm dia concertina coil reinforced punched ( chrome razor or balde wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incl galvanised MS staples / clips for tying at crossing complete all as specified and directed by Engr-in-Charge.

S&F in repair 60cm/ 45cm dia concertina coil reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/Clips for tying at crossing complete all as specified and directed by Engineer–in-Charge

Taking down existing angle iron from wall embaded in PCC 1:2:4 incl demolition of existing PCC and refixing in the same opening complete all as specified and directed by Engineer–in-Charge.

Restriaining resecurig including making good staples or tighting of cross wire galvanised barbed wire in any dia of wire or any spacing complete all as specified and directed by Engr-in-Charge.

Dismantling mild steel work of any description not otherwise provided complete all as specified and directed by Engr-in-Charge.

M&L for frame work such as grill, as an fencing posts, angle, grating etc with ends of bara shouldred and / or revetied or forged into spikes , framed guard bars , barred iron doors, ladders, framed ballusters etc & similar work confarming to Fe-290 grade E1-65 complete all as specified and directed by Engr-in-Charge.

Supply only lntegral water proofing compound mix cement concrete/cement plaster as per manufacture instruction all as directed by Engr-in-Charge.

S&F in repairs, Precast Cement concrete manhole/drain cover of size 1200mm x 600mm x 70mm thick srounded with steel strip 70x1.25mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing drain complete all as specified and as directed by Engr-in-Charge. Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover.

S&F in repair chromium plated fancy type foam flow Bib taps 15 mm dia cast copper alloy with crutch or handle screwed down, screwed for iron pipe complete all as specified .Make : Jaquar/Pray/Mark.

S&F, in repair angular stop cock, 15 mm dia fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or handle screwed both ends for iron pipe or for union complete all as specified & directed by Engr-in-Charge .

S&F in repair chromium plated brass pillar taps 15mm bore long body cast copper alloy fancy type, complete all as specified and directed by Engr-in-Charge. Make- Hindware , or equivalent of Jaquar/Marc/Hindware.

S&F stainless steel bright polished barrel tower bolt with plate with 10mm dia of shoot and 200mm long complete all as specified directed by Engr in Charge.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 30mm x 160mm all as specified and directed by Engr-in-Charge.

S&F in repair 10mm thick, 200mm quarter round , as bull nosing fixed with stainless steel bracket with steel screw in corner shelf all as specified and directed by Engr-in-Charge.

S&F 15mm chromium plated foot operated tap with spout push cock faucet (deck mount installation type) system along with inlet and outlet 1.00 mtr PVC connection each fixed at ground floor with screw and completed with other necessary fitting all as specified and directed by Engr-in-Charge. Make:-Hindware/Cera/ Jagour/Kamal/Xen or equvilent as approved by Engr-in-Charge.

Taking down shutter of any discription exc 1 Sqm n exc 2 Sqm each and refixing in the same opening after necessary minor repair all as specified directed by Engr in Charge.

Taking down shutter of any discription exc 2 Sqm and refixing in the same opening after necessary minor repair all as specified directed by Engr in Charge.

Taking down shutter of any discription n.exc 1Sqm each and removed from site complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any discription exc 1 Sqm but n exc 2 Sqm each and removed from site complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any discription exc 2 Sqm each and removed from site complete all as specified and directed by Engr-in-Charge.

Taking down Chowkhats or frames n exc 1.5 sqm each without taking of shutter from the frame all as specifed and directed by Engr-in-Charge.

All as per item No 59 hereinbefore but exc 1.5 Sqm and not exc 4 Sqm Each all as specified and directyed by Engr in Charge.

S&F size 105x60mm for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed by Engr-in-Charge.

M&L for second class Hardwood 35 mm thickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified by Engr-in-Charge.

S&F factory made 35mm thick solid core Flush door shutter with block board core with BWP plywood on both side complete all as specified directed by Engr in Charge.

M&L second class hardwood 35mm thickness plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink wood primer complete all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass/frosted glass 4mm thick in wooden/ aluminium/or steel window glazed with oil putty or fixed with beads/clips/screws in square n exc 0.50sqm and exc 50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

S&F repair in of PTMT waste pipe 31/32 mm bore 80 cm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PTMT waste coupling 31/32mm bore of discharge (Half or full threaded) Min weight 45 gms, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm push pillar cock (auto closing system) of Jaguar or equivalent brand and manufacutre all as specified and directed by Engr-in-Charge.

M&L for 8 to 10mm thick densified reqular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm including main 'T' runner of size 24x38mm made from 0.33 mm sheet hot deep galvanized steel section making good existing frame without disterbing the other false ceiling with all as directed by Engr-in-Charge.

Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheets any thicknes in roof covering all as specified and directed by Engr-in-Charge.

S&F Asbestos cement 6mm thick corrugated or semi-corrugated sheets in roof firxed with L-type or J-type crenked hook bolts complete all as specified and as directed by Engr-in-Charge.

All as per item No 76 hereinbefore but using old serviceable AC sheets retreived from item No 75 above etc complete all as specified and directed by Engr-in-Charge.

S&F Asbestos cement 6mm thick in two pieces adjustable plain ridge fixed wirth l-type and J-type hook bolts complete all as specified and as directed by Engr-in-Charge.

Dismantling framed trusses span exc 6 mtr but n exc 10M complete all as specified and directed by Engr-in-Charge.

Dismantling framed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed by Engr-in-Charge.

M&L for Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.Fe-410 (Gde E-250) complete all as specified and directed by Engr-in-Charge.

M&L for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 all as specified and directed by Engr-in-Charge.

Note:- The amount of Rs 92110.00/- against Schedule of Credit on Page No 137 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

M/S ujjwal associates

NAVREET CONSTRUCTION

M/S CHANDER MUNI

Phogat Builders