COMPREHENSIVE MAINT CONTRACT TO JCO/OR MD ACCN AT BHAGAT ENCLAVE UNDER GE BABINA

Amount

S&F in repair of extruded Aluminum anodised handles 100 mm long, fabricated type, complete all as specified and directed.

S&F in repair of extruded Aluminum anodised handles 200 mm long, fabricated type, complete all as specified and directed.

S&F in repair of Aluminium anodised barrel tower bolts 200 mm long of extruded section, complete all as specified and directed.

S&F in repair of Aluminium anodised barrel tower bolts 150 mm long of extruded section, complete all as specified and directed.

S&F in repair of 16mm dia Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 300mm long, plate type, complete all as specified and directed.

S&F in repair of Aluminium anodised 150mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with swivel joints incl fixing to steel pipe/union complete all as specified and directed.

S&F in repair of MS 100mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed complete all as specified and directed.

S&F in repair of Aluminium anodised floor door stopper 140 mm with hard drawn steel spring long, complete all as specified and directed.

S&F in repair of Butt hinges, 100 mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair of Butt hinges, 75 mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair of Butt hinges with galvanised MS hinge pin, 100 mm size, aluminium anodised extruded, B-21 type, complete all as specified and directed.

S&F in repair of MS ordinary rat tail rod pattern springs of size 300mm incl roller & roller plate, complete all as specified and directed. Note : Including welding work as required for fixing in steel chowkhats.

S&F in repair of wooden bright polished Cup board knobs, 40mm dia size with nut, screw & washer, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed.

S&F in repair of magnatic catcher for cupboard and kitchen cabinets, complete all as specified and directed.

S&F in repair of Aluminium anodised (pegset) hat and coat hooks, solid body,175mm to 250mm with six hooks, complete all as specified and directed.

Hacking out old broken glass (any thickness,any quality or description ) from wooden frames or stone,concrete or brick surrounds,glazed with putty or fixed with beadscomplete all as specified and directed. Note:- (i) Work will be executed up to height of 6 meter for G+1 and no extra payment will be considered for extra height and for temporary scaffolding.

S&F 3mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, complete all as specified and directed. Note:- (i) Putty / Wooden beading included for fixing of glass in wooden /steel window shutter (II) Work will be executed up to height of 6 meter for G+1 and no extra payment will be considered for extra height and for temporary scaffolding.

-ditto as per item No 19 above but in plain glass.

S&F in repair of SS wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm, and fixed with SS wire staples,complete all as specified and directed.

S&F in repair of 18/19mm thick prelaminated MDF board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with timber frame work complete all as specified and directed.

S&F 19 mm Cover fillet of external teak wood lipping 6mm thick fixed with nail all as specified and directed.

S&F in repair of curtain rod 25mm dia anodised aluminium alloy CP with incl wall mounting brackets,stops,rollers complete all as specified and directed.

S&F in repair of door seal 20 to 25 mm wide with GI Powder coated flap fixed to wooden doors with screws, complete all as specified and directed.

With or without taking down and Refixing in the same opening of door/window/cupboard wooden shutter of any description not exceeding 1 Sqm each including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge

All as per item No 26 above but exceeding 1Sqm and not exceeding 2 Sqm

Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each complete all specified and directed. Note: Including cutting of hole as required at site for taking down and making good of disturbed portion with brick work of CM 1:6 or PCC 1:2:4.

All as per Ser item No 28 above but not exc 1.5 sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each

Taking down Shutters of any description exc 2 sq. m each

Material & labour 2nd class hardwood plain, solidstraight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, put together with glue pinned at joints, all as specified and directed.

S&F 125 mm x 60 mm size pressed steel frames locally fabricated for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom. PCC shall be provided in hollow frame in same rates.

S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters (locally fabricated), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.

M&L for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Removing of air lock in water pipe line of Bathroom / Toilet/ Kitchen by manual pump or moter pump as required at site condition and making functional water pipe line.

S&F in repair of Ball valves, 20mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in repair of Ball valves, 25mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in repair of PTMT waste coupling, 32/40 mm dia, half or full thread, complete all as specified and directed.

S&F in repair of PTMT waste kitchen sink coupling, 100 mm dia with waste pipe, complete all as specified and directed

S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed.

S&F in repair of PVC connection 450 x 15mm dia, PTMT nuts at both end, complete all as specified and directed.

S&F in repair of Hot water connection (Braided Hose type), 450 x 15mm dia, Brass nuts at both end (for geyser), complete all as specified and directed.

S&F in repair of PVC seat cover, suitable for existing EWC, complete all as specified and directed.

S&F in repair of Brass Spindle for bib taps/pillar taps/angle cock 15 mm, complete all as specified and directed.

S&F in repair of Brass Spindle for mixer 15 mm, complete all as specified and directed.

S&F in repair of GI Pipe 15 mm Medium Grade, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F in repair of GI Pipe 20 mm Medium Grade, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F in repair of GI Pipe 25 mm Medium Grade, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F of 20mm outer dia CPVC pipes SDR 11 & CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F of 25mm outer dia CPVC pipes SDR 11 & CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repair PVC (SWR) 110mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F in repair PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls, including hold fast for fixing of pipe in wall complete all as specified and directed.

S&F of PVC(SWR) Bend any radius suitable for 110 mm Pipe, complete all as specified and directed.

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) branch piece, single (double Y)) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) reducers complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F of PVC(SWR) Bend any radius suitable for 75 mm Pipe, complete all as specified and directed.

M&L PVC (SWR) floor trap 110/125 mm dia plain with grating including jointing with solvent cement

S&F in repair of CP bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, fancy type complete all as specified and directed.

S&F in repair of CP Pillar cock, 15 mm dia with flange made of cast copper alloy fancy type, complete all as specified and directed.

S&F in repair of CP fancy type stop cock, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP two way angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed.

S&F in repair of CP two way bib cock & angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed.

S&F in repair of CP wash basin mixer, pillar type with out popup waste system, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wash basin mixer, swan neck type with out popup waste system, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wall mixer, incl provn for shower connection, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wall mixer swan neck type, for kitchen 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP health faucet with 8 mm dia, 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed.

S&F in repairs chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 8-10mm thick CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge .

S&F in repair of SS grating of 125 mm dia size, complete all as specified and directed.

S&F in repair of SS grating of 125 mm dia size with hole for waste pipe, complete all as specified and directed.

S&F in repair of Gun-metal gate valve with iron wheel, screwed both ends, 20 mm bore size, complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed .

S&F in repair vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor.

Supply & Fix in repairs Vitreous China wash down water closet pan (pedestal pattern), EWC, coloured including jet system & matching coloured seat cover fixed ccomplete all as specified and directed.

Running welding in repairs not exc 6mm thickness of metal to be welded complete all as specified and directed.

Welding in repairs n. exc 2.5cm in length n exc 6mm thickness of metal to be welded complete all as specified and directed.

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store.

M/L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement.

Material and labour for colour printed glazed ceramic tiles 300X600mm x 7mm thick as in wall, dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match

Machine cut Kota stone slab in floor 18-20 mm thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and nosing complete all as specified and directed.

M&L for 18-20mm thick granite of any type in full length for kitchen plate form, machine cut bedded and jointed with grey cement sluury and pointed with white cement with admixture of pigment to match the shade over 15 mm thick screed bed (1:6) including grinding and polishing complete all as directed.

M&L Stone slab 25mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120 cm in copings, window cills, chajjas, sunshades, etc., complete all as specified and as directed.

M&L Cement concrete in foundations/sub base, filling and mass concrete 1:4:8 type D2 (using 40mm graded stone agg) complete all as specified and directed.

M&L for Glossy finish Chequered cement concrete tiles 30cm x 30cm x 22-25mm thick approved colour, design & pattern as in footpath, parks, lawns, parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern, set, jointed and pointed in grey cement with color pigments slurry in floors over 15mm CM (1:6) thick screed bedding specified and directed by engr-in-charge.

M&L for Glossy finish 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed.

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, of 75 mm thick finished fair and even, using extra cement complete all as specified and as directed

S&F in repair for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed.

Demolition of RCC water storage tank of size exc. 600x1200x1000 mm but n.exc 1200x1600x1500mm on roof, floor, staging complete and the scrap should be removing to distance of 50m where directed by EIC.

S&F 500 ltr 3 layer white colour rotational moulded polyethylene cylindrical vertical with closed top water storage tank including 20mm ball valve and gate valve hoisted and fixed in position on new or existing foundation complete all as specified and directed.

S&F 1000 ltr 3 layer white colour rotational moulded polyethylene cylindrical vertical with closed top water storage tank including 20mm ball valve and gate valve hoisted and fixed in position on new or existing foundation complete all as specified and directed.

Disconnecting existing 500 to 1000 litres tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).

Cleaning & removing all scale & dirt, etc. from 500 litres tankS&Form mouths of circulating pipes, etc.

Cleaning & removing all scale & dirt, etc. from 1000 litres tankS&Form mouths of circulating pipes, etc.

Demolition of PCC in thickeness in sunken floor of toilet/bathrom/kitchen complete, all as directed and as specified.

M&L rendering 10 mm thick in CM 1:3 on fair faces of brick/concrete surfaces of sunken floors including WPC finished even and fair with out using extra cement complete.

M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors all as directed.

M&L for two or more coat of Epoxy (Hardener and raiser ) coating over primer over new prepared wall /floor surfaces in sunken floor complete, all as directed and as specified.

M&L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and as specified.

M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, copings, bond stones, bed plates for hold fast and the like including weathering, slightly rounded or chamfered angles and throating, , complete all as specified and directed.

M&L for mild steel angles, bars, flats etc, as in hold fasts, pipe clamps, plain angle cleats for securing purlins, supports for stiffening of fencing, wall ties and similar small articles confirming to Fe-290 Gde E-165, complete all as specified and directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for doors/windows chowkets conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repair for stainless steel kitchen plate rack including fixing arrange ment to walls with rawel plug or wooden plugs complete all as specified and directed.

S&F in repairs sink with drainage board made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including bedding in CM 1:3 into dwarf wall or cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed by Engineer-in-Charge

S&F in replacement of SS soap case premium quality, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc.

M&L rendering/screeding 15mm thick cment mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as specified and as directed

M&L renderig 15mm thick cment mortar 1:4 on other than fair faces of brick or concrete surface of wall rendering is to be finished even and smooth with out using extra cment complete all as specified and as directed

Materials and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over one coat of putty complete.

Materials and labour for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer over one coat of putty complete.

M&L preparing old decorated plastered or unplastered surfaces of wall, pilasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed. Note: All grass, trees should be removed from the chajjas, and wall during the time of white wash, No extra payment shall be paid to the contracotrs

Description same as per item No.125 above but on ceiling in lieu of walls complete all as spedified and as directed.

M&L for preparing old decorated plastered or un-plaster surfaces of wall, pilaster, cornices etc by brooming down or steel wire brushing, scrapping down smoke root moulds, moss and efforehance salt and trading oil and greasy spot and applying one coat oil bound distemper on wall with exesting coloure match and all as specifed and as directed.

M&L for preparation of old decorated surfacees of wall by washing, rubbing down and stoping of painted surfaces and applying one coat of cement base paint complete all as directed

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

Preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint).

Preparation of New steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

Demolition and breaking drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe for 150 mm Internal dia of pipe complete all as specified and directed

Demolition and breaking drain pipe (salt glazed stoneware)set in cement mortar including packing under and haunching against side of pipe for 200 mm Internal dia of pipe complete all as specified and directed

Concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 complete all as specified and directed

Concrete bed to drain pipes 200mm including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 and complete all as specified and directed

M&L Salt glazed stone ware (SGSW) grade 'A' pipe 150mm bore laid and jointed on concrete bed complete including testing all as specified.

M&L Salt glazed stone ware (SGSW) grade 'A' pipe 200 mm bore laid and jointed on concrete bed complete including testing all as specified.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil complete all as specified and directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and directed

Removing excavated at a level n.exc 50m m above the starting point complete all as specified and directed

M&L cement concrete as in coping concrete type B-1, 1:2:4 using (20mm graged aggregate) complete all as specified and directed.

Cleaning of sewage line any size ,incl taking out sludge in any form along with all other foreign material by mechanically or mannually and taking out side from MoD land by any means duly covered complete all as specified and directed.

Cleaning of manhole any size incl taking out sludge in any form along with all other foreign material by mechanically or mannually and taking out side from MoD land by any means duly covered complete all as specified and directed.

Cleaning/Removal of blockage of kitchen / Bathroom floor trap incl taking out sludge in any form along with all other foreign material by mechanically or mannually and taking out side from MoD land by any means duly covered complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L for Brick work old size with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work old size with fly ash bricks, straight or curved on plan to any radius radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20 mm graded store aggregate as in coping/surface channel /drains complete all as specified and as directed.

Taking down mumty door chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each complete all specified and directed. Note: (i) Including cutting of hole as required at site for taking down and making good of disturbed portion with brick work of CM 1:6 or PCC 1:2:4. (ii) tenderer are advised to visit the site of mumty door to avoide the credit issue at later.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O

S&F Mild steel, plain black sheet 1.25mm thick in wall cladding, steel gates & similar work, cut to size, holes punched; including round headed screws, clout nails or rivets & fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M & L for concealed point wiring for one light point/Fan Point/Ext Fan Point/ Bell Point controlled by one, one way switchcomplete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed.

Description all as per item No 162 above but for One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

Description all as per item No 162 above but fo One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

Description all as per item No 162 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket/swich outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, and 15 Amp flush type complete all as specified and as directed.

S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S&F ceiling rose,surface 63 x50mm three terminals complete all as specified and as directed.

Supply and fixing in replacement Modular switch 6 amp one way 230 V incl dismentling of old unserviceable switch of any make all as specified & directed .

Supply and fixing in replacement Modular switch 16 amp one way 230 V incl dismentling of old unserviceable switch of any make complete all as specified and directed.

Supply and fixing in replacement Modular socket 6 amp 5 Pin one way 230 V complete all as specified and directed.

Supply and fixing in repair Modular socket 16 amp 5 Pin one way 230 V incl dismentling of old unserviceable switch of any make complete all as specified and directed.

Supply and fixing in replacement Modular fan Regulator step type and make, 120 watt , 230 Volts ismentling of old unserviceable regulator complete all as specified and directed.

Supply and fixing in replacement modular cover plate with frame 4 module type for fixing of modular switch socket, regulators, blank plates etc incl dismentaling old unserviceable cover plate complete all as specified and directed.

Supply and fixing in replacement modular cover plate with frame 8 module type for fixing of modular switch socket, regulators, blank plates etc incl dismentaling old unserviceable cover plate complete all as specified and directed.

S&F fan condenser as per site requarment complete all as specified and directed.

Taking down ceiling fan/Exhaust fan, sealing cable end,dismantling blades and removing fan and blades to store or repair and refixing in same position including connector from ceiling rose to fan connector complete all as specified and directed.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-42 DB's suitable for one MCB SPN as incoming and 2 MCB SP as out going,SPN 4Way complete incl dismentaling of unservceable DB complete all as specified and directed.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete incl dismentaling of unservceable DB complete all as specified and directed.

S&F replacement sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for one No 100 Amp 10 KA TPN MCCB as incoming complete incl dismentaling of unservceable DB complete all as specified and directed.

Supply and Fix in replacement MCB Single pole"C" series 6-32 Amps 10 KA, 240V, ISI marked incl dismantaling old unserviceable MCB SP complete all as specified and directed.

Supply and fix MCB 40A - 63A, SPN, 'C' curve, 240 V, 50 Hz complete all as specified and directed.

M&L repairing storage type water heater (geyser) including replacement of suitable heating element thermostate with adjustable tempreture , heating element. complete all as specified and directed.

Supply and fixing in replacement MCB TPN C Curve 40 to 100 Amps, 415 V incl dismantaling of old unserviceable TPN MCB complete all as specified and directed.

Supply and fixing PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 1.5 sqmm as in replacement of any defective/burnt circuit incl taking down old UNSV cable complete all as specified and directed.

Supply and fixing repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 2.5 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable complete all as specified and directed.

Supply and fixing in replacement Modular Bell push any type and make 6 amp one way 230 V taking down old UNSV bell push all as specified & directed.

All as per Ser item No 162 here in before but with using 4 Sq mm single core multistanded copper conductor cable including 4 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board complete all as specified and directed.

S&F in replacement LED light fitting 1 X 20 watt (4 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete and incl taking down old UNSV fitting all as specified and directed.

S&F in replacement LED light fitting 1 X 9 watt (2 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete and incl taking down old UNSV fitting all as specified and directed.

Supply and fix in replacement of LED street/security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size incl taking down old UNSV Bulkhead fitting complete all as specified and directed.

S & F repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 4.0 sqmm as in replacement of any defective/burnt circuit complete all as specified and directed.

S & F repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 6.0 sqmm as in replacement of any defective/burnt circuit complete all as specified and directed.

POLISHING OF WOODEN FURNITURE ITEMS :-

Material and labour for preparation of old existing polished surface of Bed plywood top (FD-246 & 247) wooden furniture by scrapping and rubbing down by emery paper including removing oily spots, ink dots, filling the cracks and pores with paste and putty and malamine spary polish glossy finish make - Asian/Berger to the entire articals with satisfaction of user and Engr-in-Charge. All the furnitures should be carried out minor repair and tightining before the polishing. The tint of polish shall be exactly same as of existing polish colour of furniture or as aproved by Engr-in-Charge.

Description same as item No 200 above but polishing of Bin Soiled multipurpose (FD/MAP-II/09)

Description same as item No 200 above but polishing of Chair dining (FD-279)

Description same as item No 200 above but polishing of Chair dining Officers (MAP) FD/MAP-II/04

Description same as item No 200 above but polishing of Chair dining JCOs/ORs (MAP) FD/MAP-II/05

Description same as item No 200 above but polishing of Chair Writing (FD-228, 230)

Description same as item No 200 above but polishing of Hat Stand with mirror (FD-233, 286)

Description same as item No 200 above but polishing of Peg Table (FD-236, 384)

Description same as item No 200 above but polishing of Side board (Internal & External) (FD-241, 371, 372)

Description same as item No 200 above but polishing of Sofa Set 5 Seate (FD/E6/MAP/02, 373, 258)

Description same as item No 200 above but polishing of Stool Dressing CB (FD-27, 252)

Description same as item No 200 above but polishing of Table 3'x2' with/without drawer

Description same as item No 200 above but polishing of Table Bed side (Internal & External (FD-210, 248, 276)

Description same as item No 200 above but polishing of Table Centre (FD-375, 274, 235)

Description same as item No 200 above but polishing of Table dining 4/6/8 pers (FD/MAP/E6/09, 376, 273, 239)

Description same as item No 200 above but polishing of Table dressing Gents FD-379, 230)

Description same as item No 200 above but polishing of Table dressing ladies (FD-251)

Description same as item No 200 above but polishing of Teapoy (FD-278, 382)

Description same as item No 200 above but polishing of Book Case (FD-45, 355, 356)

Description same as item No 200 above but polishing of Chair dining with long back (FD-357)

Description same as item No 200 above but polishing of Sofa set Single/Four Seater (FD-281/373/258/FD/E6/MAP-II/02)

Description same as item No 200 above but polishing of Table dressing ladies (MAP) (FD/E6/MAP/07)

REPLACEMENT OF SOFA CUSHION Removing of old cushion of size 21 x 22 inchs & 4 inchs thick foam and replacing foam cushion of Sofa Set (Single, three seater, Four seater & Five seater) new PU foam cushion of 40 density (Make- Sleepwell/Kulon and cushion shall be covered with velwet D. décor cloth tapesty cloth of range not less than Rs 600 per meter, colour, shade and quality of tapesty shall be as approved by GE. Complete rest all as specified in drawings & directed. (FD/E6/MAP/07, FD/E6/MAP/02, 273, 258)

Removing of old UNSV of Table dressing ladies stool (MAP) S&F new PU foam 75mm 32 density covered with velwet D. décor cloth Tapesty cloth of range not less than Rs 600 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified in drawings & directed. (FD/E6/MAP/07)

Removing of old UNSV cushion of Chair dining Officers cushioned, S&F new PU foam 75mm 32 density covered with velwet D.decor cloth Tapesty cloth of range not less than Rs 600 per meter, shade and quality of tapesty shall be as approved by GE complete all as specified in drawings & directed. (FD/E6/MAP-II/04)

Removing of old UNSV/worn out plastic seat from Chair dining, S & F new plastic seat of size 405x390mm & preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary as directed by Engr-in-Charge.

PAINTING OF STEEL FURNITURE ITEMS :-

M&L for preparation of old existing painting surfaces of Painting of Almirah Large Steel all type (Internal & external) (FD-1031/1032/351) by scrapping the old and filling the dents by applying putty upto the required level and smoothening the surface with sand paper including denting and minor repairs before applying one coat of primer wherever required and to be spray hamaltone spary paint dual colour with dark bron and silver gray with synthetic enamel paint make Asian/Berger as approved by Engr-in-Charge and as directed.

Description same as item No 227 above but painting of Almirah MAP steel (Internal/External) FD-1030)

Description same as item No 227 above but painting if Almirah Medium steel all type (Internal & External)

Description same as item No 227 above but painting of Almirah Large Steel 1/2H & 1/2S (Internal & External (FD/E6/MAP/18)

Description same as item No 227 above but painting of Almirah Medium steel 1/2H & 1/2S (Internal & External)

Description same as item No 227 above but painting of Rack Shoes Steel MAP (FD/E6/MAP/02®

Description same as item No 227 above but painting and canning of Chair Verandah (FD-359/256)

Description same as item No 227 above but painting of Locker steel (Internal & External) FD-1029)

Description same as item No 227 above but painting of Locker steel TD-645 (Internal & External) FD-1029)

Description same as item No 227 above but painting of Bed Hard Steel MAP (FD/E6/MAP/08®

Description same as item No 227 above but painting of Charpoy with Hard Top (FD/MAP-II/01)

Description same as item No 227 above but painting of Chair Verandah Steel (MAP) FD/E6/MAP/11)

Description same as item No 227 above but painting of Table Computer (MAP) FD/E6/MAP/03

Description same as item No 227 above but painting of Chair Writing (MAP) FD/E6/MAP/12)

Replacement of Lock of Almirah Large/Medium steel Make- Godrej/Harrision (FD-1031/1032/1030/FD/E6/MAP/18)

Replacement of Handle of Almirah Large/Medium steel Make- Godrej/Harrision (FD-1031/1032/1030/FD/E6/MAP/18)

Repalcement of Lock of Locker steel FD-1029)

Repalcement of Handle of Locker steel FD-1029)

Repalcement of Lock of Locker steel TD-645

Repalcement of Handle of Locker steel TD-645

Notes :-

Supply of complaint handling software system including inventary with following features :- (i) (a) App based complaint system (Android & IOS) : Development and supply of web based app applicable for both android & IOS developed exclusively for GE Babina station. The app to consist of various provision to register complaint by user and download complaint by admin. The approval of functions in the app will be done by GE before finalisation of web based app. The app shall have minimum feature of online complaint booking and handling, mapping of Qtr under GE Babina, lodge a new complaint, add complaint, assigned complaint to technician, close complaint, inventory, feedback from user as satisfactory or unsatisfactory etc. (b) SMS Features : User can receive compaint docket no by SMS, closed complaint, hold complaint, assigned complaint to technician. close complaint, inventory etc cost in carried on account of sending and receiving SMS from/to user will be included in the quoted rate during currency of contract. No additional payment shall be made on this ground.

(c) Maintenance/upkeeping of all the records and status of day to day all kind of related complaints with works by deploying Data Entry Operators (Skilled) from 9 AM to 5 PM including sunday & holidays. Contractor to provide 04 (Four) telephone number at customer care support/hot line at his service center for enabling the user to lodge his complaint. This number will be attended 24 hrs 07 days during currency of work at service centre. No additional payment will be made on this ground. The rates also include cost of compatible computer sytstem, printer, peripherals, consumables, telephone, internet/broad band connection etc comprising of following duties:- (i) Downloading the complaints received from service centre on daily basis for assigning the work to the workers of respective trade. (ii) Uploading all the complaint received at the service centre by any mode in the MES E-Complaint System/ App based complaint system and uploading the status of attending the complaints on daily basis so that the back log is not more than one day/as per required complaint as per time/agreement. (iii) Preparing abstract for unattended compalint on daily, weekly and monthly basis and submitting the same to concerned Engr-in-Charge.

(iv) Failure in maintaining Service Centre in working condition shall attract recovery @ Rs. 500/- per day. Spare capacity of individuals after attending emergency complaints may be utilized for attending routine complaints. (v) The contractor shall take immediate action to attend all complaint lodged on app based system or any complaint assigned to him through site order book / verbal instructions from Engineer-in-Charge or on telephones / through service centre of app based system or through any mode, from occupants. In all cases he shall attend the complaints in the specified duration. All complaints reveived by any mode shall be entered in the app based system and docket No for the complaint will be raised immediately and notification for the same shall be communicated to user through app and SMS system whichever is possible. All complaints received on phone calls will be only registered in the register and app based system.

(vi) The daily complaint monitoring system on the app based portal will be used for lodging and attending complaints will be provided by the contractor. (vii) The expenditure on account of internet for using app and infrastructure shall be borne by the contractor. Nothing extra shall be paid on this account. (viii) Any compaint raised by user by any means (i.e. app based, telephonically, SMS, Service Centre helpline or any other mode) shall be uploaded on app based software by the auth rep of contractor at Service Centre. If the user gives a feedback that the complaint has been attended unsatisfactorily, it will be considered as unattended. No payment on this ground shall be made to contractor. (ix) In subject work the contractor has to deploy adequate number of (a) Sewer Men (b) Carpenters (c) Plumbers (d) Mason (e) Electrician from 9 AM to 5 PM excluding sundays/Holidays as mentioned for attending and rectiying day to day complaints related to all kinds of repair/replacement to be carried out in the works. The number of helpers to assist the skilled workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account.

(x) Welder/blacksmith (Skilled) are to be deployed as and when required on complaint basis. The work includes electric welding machine, gas cutter, welding rods (ISI) including hire charges of welding machine, cost of welding rods, transportation of welding machine to site and carrying out other associated operations for attending the complaints and making system fully functional, to the entire satisfaction, complete all as specified and directed by GE/Engineer-in- charge.

(xi) The contractor is also required to deploy 01 (one) site Engineer (Skilled) who will amicably supervise/ assist the entire works. The qualification shall be Degree in Civil Engineering with 03 years experience or Diploma in Civil Engineering with 05 years experience. Notes:- (i) Quoted rates shall include repair of all minor items such as cups, washers, nuts & bolts, screws and all material required except specified under relevant item of supply only (Schedule A part I) etc or any other material as directed by Engr-in-charge. (ii) The quoted rates shall also incl the labour part for all the supply only items as enlisted under sch A part-I. (iii) Materials retreived from repair/replacement of parts or attending complaints, other than mentioned in credit schedule shall be the contractor's property and nothing shall be recovered from the contractor. Rates quoted are deemed to be inclusive of this aspect. (iv) Apart from above based upon Number of complaints & quantum of work involved and during emergencies irrespective of working hours, the additional work force is required to be deployed accordingly as decided by GE/Engr-in-Charge. The rates for same is deemed to be included in this item only and nothing extra shall be paid and no claim is admissible on this account.

(v) The bidders are advised to pay due cognizance while quoting their rates with respect to minimum fair wages, periodical hikes in wages, repair/replacement of parts, labour charges for fixing of supply only items, extra manpower required keeping in view quantum of complaints/works and during emergencies for timely disposal and user facilitations for which no excuses shall be entertained. (vi) The contractor is responsible to provide all T&P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site. (vii) It may also be noted that the subject CA is for 09 months therefore the periodical change of workforce as per labour laws is the sole responsibility of the contractor for payment of minimum wages plus allowances etc and no worker shall have any lien/ claim of permanency in Govt Services during or after the contract period. (viii) For the details of the work force/labours required in the subject work refer PS clause.

(ix) Any other misc works/services connected with user facilitation as per direction of GE/Engr-in-Charge. (x) Recovery on Absentees The contractor will maintain attendance records of the staff, which will be checked by the Junior Engineer/Engineer-in-Charge/GE of the work. In case of absence of any staff, recovery shall be made at the following rates: (a) Skilled @1500/- per day/ per person. (b) Semi-skilled @1200/- per day/ per person. (c) Unskilled @1000/- per day/ per person. (xi) Recovery on non attendance of complaints. The contractor shall take immediate action to attend any complaint assigned to him through site order book/verbal instructions from Engineer-in-charge or on telephones, MES call centres/IVRS from occupants. In all cases he shall attend the complaints in the specified duration. Penalty for non attending Complaints:- (a) Complaint pending 3-12 hours - 100 Rupees per complaint. (b) Complaint pending 12-24 hours - 200 Rupees per complaint. (c) Complaint pending 24-48 hours - 500 Rupees per complaint. (d) Complaint pending more than 48 hours - 1000 Rupees per complaint. (

xii) Recovery on non wearing of uniform The employee and labourers engaged by the contractor under this contract shall wear neat and clean uniforms as approved by Engineer-in-Charge along with name badges, else recovery shall be made @ Rs 50/- per person per day.

VIJAY BUILDERS (BID ID -3273340)