Construction of New PD Shop No 27BC002PN at Kambaramayanam Street, in Wad No 11

Amount

Earth work excavation and deposting on bank with an intial lead of 10m& initial liftm of 2m in hard siff clay, stiff black cotton, hard red earth shales, murram, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil asper standard specification 20.B including refilling charges

Plain cement concrete 1:4:8 mix using 40mm metal ISS HBG metal including and const and conveyance of all materials and all labour charges etc completeas per std specification

Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with out props, With all cost and conveyance of materials and lab our at site ect ., Coplete as per standard specfication.

For Raft & Floor Beam

For Column

For Slab & beam

Supplying , fabricating and placing in it position of MS or RTS rod including the cost of steel & Binding wire, labour charges for cutting, bending, placing & tying with grills and conveyance etc., complete.asper standard specification.

Reinforced cement concrete 1:11/2:3 mix using 20mm ISS size HBG metal from approved quarry including all cost and conveyance of all materials to site and all labour charges etc., complete.asper standard specification.

For Foundation / Basement

For Ground Floor

Filling basment with excavated earth in layers of not more than 30cm thick, well rammed, watered and consolidated complying with standard specifications etc., complete

Supply and filling of well gravel for foundation and beasement including cost and conveyance of all materials and consolidation with water, ramming etc., complete asper standard specification.

Brick work in cement 1:5 mix using well burnt country bricks of size 83/4"x41/4"x23/4" including all cost and conveyance etc complete as per std specification

For Basement

For Super Structure

Special ceiling Plastering cement mortar 1: 3 mix 10mm thick including cost and conveyance all materials etc. complete as per std specification

Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification.

Weathering course of concrete borken brick jelly 20mm size in pure slacked lime over RCC roof slab the proportion 32:12.5 (Thirty two Broken Jelly and Twelve and Half Slacked lime) Mix for required depth of 80mm for giving required slope and thickness to roof as required well beaten with wooden beaters etc., complete complying with standard specifications.

Terrace flooring with one course or pressed tiles of size 20cm x 20cm x 20mm laid in CM 1:3 (One cement and three sand) mixed with crude oil 10% by weight of painted with same oiled mortar in all cost of materials and lab our charges etc., complete. as per standard specification.

Paving the floor with ceramic tiles siratch proof design of size 305mm x 305mm x 6mm in Cement Mortar 1:3, 20mm thick with all cost and conveyance of materials etc., for flooring of self designed grooves and both way special colour tile of best quality and pointing with white cement using atthe rate of 0.40Kg / sq m including finishing thejoint neatly and pointing flush with tile surface etc complete

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Dadooring the walls with glazed square tiles of 150mmx150mmx6mm of the following colour set in cement Mortar 1:2 10mm thick and pointed with white cement @ 0.4Kg/m2 in all floors as directed etc., complete complete complying with standard specification (S.D.261A)

Providing polished cuddapha slab of 20mm to 30mm thick for shelves, cupborards, cover slabs etc., and pointing with cement mortar 1 : 3 ( One cement and three sand) and mixed with black oxide and finished smooth etc., complete.

Supplying fixing of M.S sheet doors and widows and Grills including all cost and conveyance of materials to site and all labours charges for etc. complete asper standard specification.

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,

Painting two coats with approved Interior and Exterior Emulsion paint over cement plastered wall surfaces including cleaning preparing the surface and quring etc complete asper standard specification.

Painting two coats with ready mixed approved paint over new steel surface including cost and conveyance all materials etc. complete asper standard specification.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter.

Supplying of following pipes and special including cost and conveyance all materials etc. complete

32mm PVC Pipe

32mm PVC Coupling

32mm PVC Tee

32mm PVC Ellbow

32mm PVC Bend

32mm PVC Adopter

25mm PVC Pipe

25mm PVC Coupling

25mm PVC Tee

25mm PVC Ellbow

25mm PVC Bend

25mm PVC Adopter

20mm PVC Pipe

20mm PVC Coupling

20mm PVC Tee

20mm PVC Ellbow

25mm Gate valve

110mm PVC (6 Kg/cm2)

110mm PVC Tee

110mm PVC bend

110mm PVC Ellbow

110mm PVC Coupling

1000 litre PVC tank

15mm SD Tap

Solventcement

Supply and run of 2 of 6 sq.mm.(84/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (class 'B' ) suitably bent at both ends with neccessay angle iron upright and end support for mains (SD 69)

Supply and fixing of 16 Amps DP Switch with metal clad of 500 V with fuse and neutral (Side Handle) on suitable TW Box PWD Earthing(SD 141)

Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masony. (SD 233)

Supply and fixing of 15A aeriual fuse unit(500A) on suitable 100x100 mm TW concealed box with hylem sheet on on the tapping pole with necessary clamps (SD 128)

Supply and Fixing of TNEB meter Board suitable for 32A single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1"x1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection with 7/20 PVC insulated copper wire from EB meter to fuse unit,(SD 125).

Supply and Fixing of 5A or 10 Amps AC Single phase 230 V , 50 HZ watt hour metre on Suitable TW box complete with earth connections. (SD 124)

TNEB charges for new service connection main including all cost and conveyance etc., complete.

Providing and fixing 110mm dia PVC Rain water down fall pipe eith necessary specials with all cost and conveyance or material cost and all labourcharges etc, complete as per standard specification

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 22)

Supply and fixing of 1200mm (48") A C ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp(S D 110)

Supply and fixing of 20W 4 Feet LED Fitting with LED

Supply and fixing of 30W LED Street Light Fitting with LED

Wiring with 2X1.5 sq mm (22/0.3) P V C insulated S C, unsheated Cu. Conductor of 1100 V grade in suitable P V C rigid pipe on wall and ceiling with P V C accessories 100X113mm TW switch box for 5 A3 pin non interlocking C S plug with painting of suitable colour with contineous earth wire connection of 14 SWG TC wire for open P V C plug point ( S D 36)

Painting and lettering arrangements for using best and approved colour including all cost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification.