COMPREHENSIVE MAINTENANCE AND REPLACEMENT OF SANITARY FITTINGS PLUMBING KITCHEN TAPS WALL PLASTERING AND OTHER CONNECTED BR WORKS IN N4 NARENDRA AND RAMA DEVI AREA AT AFS CHAKERI KANPUR.

Amount

Easing of door shutters exc 1.0 Sqm but n.exc 2.0 sqm each for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters n.exc 1.0 Sqm each kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed.

S & F in repair butt hinges medium weight cold rolled mild steel of size 100 mm long at any location complete all as specified and directed.

S & F in repair Aluminium (extruded section), door closer hydraulically regulated, designation No-3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.

Repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, PVC connection, waste pipes, float valves, concealed stop cock, GI pipe joints, bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed.

S & F in repair Mortice lock of brass, vertical type, with 4 levers of size 100 mm complete all as specified and directed.

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty (ISI marked) and fixed, including taking down existing aluminium door shutter area not exceeding 2.0 sqm each, and refixing the same shutter to the original position for proper functioning including making good to the disturbed places of wall and floor complete all as specified and as directed.

S&F in repair 5mm thick tinted sheet glass special quality with new rubber beading and partitions area of any size in each pane complete all as specified and as directed.

Taking down easing and adjusting aluminum shutters including complete accessories of any description n.exc 1 sqm each refixing in same opening complete all as specified and as directed. Note :- Replacement of door closer, glass, lock, handle, tower bolt etc shall be measured and paid separately.

All as per item No 14 here-in-before but exc 1 sqm and n.exc 2 sqm each refixing in same opening.

S&F in repairs 100mm dia disc handle for Aluminium doors complete all as specified and as directed.

S&F in repair 200mm long American type handle for Aluminium doors complete all as specified and as directed.

S&F in repair double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

S&F in repair mild steel helical door spring 150 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm complete all as specified and directed.

All as per item No 21 above but length of bolt 100mm complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles fabricated type 125 mm size complete all as specified and directed.

All as per item No 23 above but 100 mm size complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, completed all as specified and directed.

S & F in repair in old or new position, Plain fillets of 2nd class hardwood, square, rectangular or traingular in section, clean sawn, secured with nails or brads, for glazed /gauged joinery, sectional area exc. 3 & not exc. 6 sqcm complete all as specified and directed.

Taking down of MS gate of any description and refixing in same position/location after necessary repair such as welding of any type of section, MS sheet, cutting of brick/concrete work including PCC type B-1, 1:2:4 (using 20 mm grade stone aggregate complete all as specified and directed.

Dismantling of wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

M&L for asbestos cement building board, 6 mm thick, fixed to timber frame work with screws including cover fillets complete all as specified and directed.

S&F 19 mm thick prelaminated particle board, interior grade with both side decorative choice lamination fixed with screw to timber frame work as in shelves , Cup board shutter etc with all around lipping complete all as specified and directed.

Petty reapirs to low level flusing cistern by adjusting the float valve, leakage PVC connection, PVC / GI bend incl replacing of rubber washer cheek nuts, plunges etc for any type of flush complete all as specified and directed.

S&F in repair 15mm bore chromium plated cast copper alloy bib taps fancy type with flange of Cat part No 7606 of Make-Prayag or equivalent of Cera/Essco complete all as specified and directed.

S&F in repair 15mm bore chromium plated cast copper alloy pillar cock of Cat part No 7602 of Make- Prayag or equivalent of Cera/Essco complete all as specified and directed.

S&F in repair 15mm bore angle valves, cast copper alloy fancy type chromium plated with flange of cat No 7610 of Make- Prayag or equivalent of Cera/Essco complete all as specified and directed.

S&F in repair 15 mm bore concealed stop valves, cast copper alloy fancy type chromium plated with flange of Cat No 7618 of Make- Prayag or equivalent of Cera/Essco complete all as specified and directed.

S&F repair chromium plated overhead shower multiflow of Cat No BOS-13 with shower arm 225 mm (with flange) of Cat No BOS-49 of Make-Prayag or equivalent of Cera/Essco complete all as specified and directed.

S&F in repair brass chromium plated towel rail of 450 mm long of Cat part No F5004104 of Make-Cera equivalent of Prayag or equivalent equivalent complete all as specified and directed

S&F in repair fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-105 gms) of Make Prayag cat No 1231 or of make specified.

S&F in repair fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-120 gms) of Make Prayag cat No 1311or of make specified.

S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) of Make Prayag or of make specified.

S&F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) of Make Prayag or of make specified.

S&F in repair ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore minimum weight 210 gms complete all as specified and as directed.

S&F in repair ball / float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 15 mm bore minimum weight 142 gms complete all as specified and as directed.

S & F in repair Gun-metal, globe or gate valve, 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.

S & F in repair Swivel shower of PTMT any colour for fixing with 15 mm pipe, (Minimum weight 40 grms), complete all as specified and as directed.

S & F in repair Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour, (Minimum weight 40 grms) complete all as specified and as directed.

S&F in repair waste fitting brass chromium plated for WHB with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of size 32 mm complete all as specified and as directed.

S&F in repair waste fittings brass chromium plated for sink with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of size 40 mm complete all as specified and as directed.

S&F in repairs PVC waste pipe 32 mm dia, 800 mm long, complete all as specified, Cat No 3271, Make Prayag or of make specified.

S&F in repairs PVC waste pipe 40 mm dia, 800 mm long, complete all as specified, Cat No 3281, Make Prayag or of make specified.

S & F in repair 10 litre capacity, PVC valveless, syphonic action type, flushing cistern, low level , white with inlet, ball valve float, and handle including brackets and connections to pipes complete all as specified and as directed.

S&F in repair 100mm / 125mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in CM 1:6 complete all as specified and directed.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 grms) complete all as specified and as directed.

S & F in repair Vitreous china wash basin , white , flat back, size 550 x 400 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S & F in repair Vitreous china squatting pan 'orrisa' pattern size 580 x 440 mm white integral floor rests ( excluding flushing cistern ) including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor, complete all as specified and as directed.

S&F in repair MS brackets for WHB/kitchen sink including taking out of existing WHB and kitchen sink and fixed in same position including making good etc complete all as specified and directed.

S&F in repair sinks made of stainless steel sink with drainage board, made out of 1.00 mm thick sheet for kitchen or laboratory with plugs, washers and waste coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330 mm x 160mm, complete all as specified and directed.

Taking down 15 mm dia GI steel tubing and connection, complete all as specified and directed.

All as per item No 59 above but 20mm bore pipe complete all as specified and directed .

M & L tubes 15 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 61.00 above but 20mm dia complete all as specified and directed.

Re-fixing of 15 mm bore old steel tubing and connection in new or old position with new fittings fixed in wall or floor ,ceiling etc complete all as specified and directed. Note:- Old GI pipe obtained from item No 59.00 shall be reused after cleaning.

Re-fixing of 20 mm bore old steel tubing and connection in new or old position fixed in wall or floor ,ceiling etc complete all as specified and directed. Note:- Old GI pipe obtained from item No 60.00 shall be reused after cleaning.

Dismantling PVC water tanks exc 250 litres and n.exc 500 litres capacity complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, hoisted & fixed in positioncomplete all as specified and as directed.

S&F in repairs PVC cover for water storage tank of any capacity with hinging device with necessary nuts, bolts and washers complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 & n.exc 500 liters of capacity complete all as directed. Note :- Date of cleaning shall be written on tanks by using stencil letters of 10 cm high with synthetic enamel paint.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing , removing serviceable tiles to store and rubbish off the premises complete as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:3 Mixed with water proofing compound on fair faces of brick or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L for two coats of master seal 550 of Sika/pidilite/Dr Fixit/Asian to prevent leakage/ seepage through sunken floor over prepared surfaces complete all as specified and directed.

Material and labour for cement concrete type D-2, 1:4:8 mix using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L 25 mm thick cement concrete type B-0, 1:2:4, (using 12.5 mm graded stone aggregate) as in sub base for floor complete all as specified and directed.

M&L non skid ceramic coloured digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exc 0.09 sqm but n exc 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed or bedding in CM 1:6 complete all as specified and directed.

All as per item No 75.00 here-in-before but as in skirting/dado but over and including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness, laid, bedded and pointed in any mortar as in floors, aprons etc complete all as specified and directed.

M&L screed bed or bedding layer or mortar 20 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills cooking platforms and like in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges complete all as specified and directed.

Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

M & L Brick work with fly ash bricks, Straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.

Ditto- all as per item No 81.00 above but except bricks complete all as specified and directed.

M & L for providing cement concrete type B-1, 1:2:4 mix (using 20 mm graded stone aggregate) as in kerb stone, coping, benching and rounded or chamfered on edges, and similar work including necessary form work complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends and complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends complete all as specified and as directed.

M & L 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in flooring / paving / plinth protection, including finishing even & smooth without using extra cement complete all as specified and directed.

M & L for 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in floor finished cement concrete even and smooth with using extra cement complete all as specified and as directed .

Taking down cement plaster on Brick or Stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6, including finished even and smooth without using extra cement, complete all as specified and directed.

M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 finished even and smooth without using extra cement, mixing with water proofing compund complete all as specified and directed. Note : WPC will be measured and paid seperately.

M & L dubbing out average 10 mm thick on irregular faces of ceiling and rendering 10 mm thick on fair faces of concrete surfaces as on ceiling in cement plaster 1:3, including finished even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over and including a coat of primer over and including 1 mm thick wall care putty completed all as specified and directed.

M & L for two coats of cement base paint over a coat of primer including preparation of new plastered surfaces on wall complete all as specified and directed.

M&L for preparation of new surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M & L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of white wash complete all as specified.

All as per item No 98.00 here-in-before but on ceiling.

M & L for preparation of old decorated plastered surfaces of wall including filling wall care putty wherever required and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces including 1 mm thick wall care putty and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Ditto all as per item No 102.00 here-in-before but applying on steel surfaces.

S&F rubber beading 75mm wide fixing with nail/screw, complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as directed.

Ditto all as per item No.105.00 here-in-before but exceeding 1.5 sqm and not exceeding 4 sqm each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed.

Ditto all as per item No. 107.00 here-in-before but exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.

M & L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M & L for 35 mm thick factory made Second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc, sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed.

Ditto all as per item No. 110.00 here-in-before but 30 mm thick for window, ventilators etc, are provided with stiles and rails as specified in SSR part-I, section 8 clause 8.24(b) complete all as specified and as directed.

S&F 32 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC frame (Single Rebated) of size of 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet supplying & fixing in opening as per specification & drawing.

S&F factory made solid PVC door shutters 30 mm thick (style) single side prelam PVC sheet used instead of plain colour PVC sheet and stile & rails having one side feathered edge on other side 10 mm 90 degree bent edge complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F PVC hinges of 100 mm long complete all as specified and directed.

S & F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

Ditto all as per Item No 117.00 here-in-before but for 200 mm long.

S & F 300 mm long aluminum anodized sliding door bolts with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F 125 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.

Ditto all as per item No.120 here-in-before but 150 mm long.

S&F repairs butt hinges medium weight cold rolled mild steel 100 mm long, complete all as specified and directed.

S&F in repairs Butt hinge medium weight cold rolled mild steel 75 mm long, complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling mild steel windows and ventilators of any description complete all as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified.

All as per item No 126 above but without glazing bars complete.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint complete all as specified and as directed.

Note for Item No 1 to 129 : - (a) The contractor shall be employee adequate numbers of of skilled tradesman/labour for timely completion of the complaint as per time frame given below :- (i) Priority-I : Complaints pertains to major water leaks, air locks, flushing cistern will be attended on priority-I and the same will be completed within 4 to 8 hrs. (ii) Priority-II : Compaints pertains to minor water leaks, re-glazing of door and windows, easing of joinery will be attended on priority-II and the same to be completed within 48 hrs. (iii) Priority-III : Compaints pertains to water proofing of roof, repair of sunken slab, minor plaster work, re-flooring, replacement of joinery minor etc will be attended on priority-III and the same to be completed within one week. (iv) Priority-IV : Major plastering, reflooring, plinth ptotections, brick work etc will be attended on priority-IV and the same to be completed within one month. (v) Contractor or his supervisor shall collect the complaint/job card from JE concerned between 0900 hrs to 1000 hrs on all working days and deposited the same after completion of job duly signed by user/occupants. (vi) Summary of complaints will prepared by the contractor and put up to Engineer-in-Charge last date of every month. (vii) If contractor shall not attend the complaint as per time frame given in Para (i) to (iv), Rs 500/- per complaint will be recovered from the RAR/Final bill.

M/S ASM ENTERPRISES

kailash brothers

P.N. BROTHER

KAMAL TRADING CO.

continentalconstructionco.