Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.2 LAccepted-AOC 1723 GUPTA AND SONS SECTOR 39 B CHANDIGARH CHANDIGARH CHANDIGARH 160036 UDYAM CH 01 0042756 | CHANDIGARH | CHANDIGARH | 160036 | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.2 L+₹39,194 (1.36%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹30.3 L+₹1.5 L (5.38%)Rejected-Finance HOSUE NO 44 MASTER COLONY SATROD KHAS HISAR HARYANA 125044 | HISAR | HISAR | HARYANA | 125044 | L3 | Rejected-Finance L3 | |
| 4 | L4₹30.9 L+₹2.1 L (7.44%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance L4 | |
| 5 | L5₹31.0 L+₹2.2 L (7.80%)Rejected-Finance PLOT NO 223 INDUSTRIAL AREA PHASE 2 PANCHKULA 134109 HARYANA | PANCHKULA | PANCHKULA | HARYANA | 134109 | L5 | Rejected-Finance L5 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
30 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-08/2023-2024 REPAIR AND MAINT OF BLDGS OF 144 AD REGT AND 908 AD REGT WORKSHOP UNDER AGE B/R II AT CHANDIMANDIR
2023_MES_593986_1
GE/CHM-08/2023-2024
Open Tender
Civil Works
Item Rate
180 days
CHANDIMANDIR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER
₹88,000
Yes
17 Jun 2023
9 May 2023
6 Jun 2023
9 May 2023
30 May 2023
23 May 2023
Amount
Taking down chowkhats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.
Taking down chowkhats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.
Taking down shutters of any description exceeding 1.00Sqm but not exceeding 2.00Sqm each complete all as specified & directed by Engineer-in-charge.
Taking down shutters of any description, area exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed.
Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling of PCC 1:3:6 in hollow frame complete all as specified and directed.
Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling of PCC 1:3:6 in hollow frame complete all as specified and directed.
30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge.
Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed.
Glazed and gauged skelton shutter (Factory made) 30mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing mentioned on Srl Page No. 134, 135 and 146 of SSR Part-II including aluminum iron mongery.
100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.
Butt hinges 100mm long, of extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 type C-21, all as directed.
200mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
150mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.
Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.
300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and directed.
Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repairs, complete all as specified and directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Steel window, box type, in repair primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 03Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 21 hereinbefore but without glazing bar.
Factory made box type steel ventilators, openable with top hung shutters with box type hinges including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded, fixed in repairs, complete all as specified and directed.
Galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed as in repairs, complete all as specified and directed.
Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
Door closer hydraulically regulated aluminium extruded section, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kilogram , fixed in repairs, complete all as specified and directed.
Supply only 5.5mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum snap beading, rubber packing, aluminum screws etc in panels exc 0.5 Square metre in each pane, complete all as specified & directed.
Supply only 9mm thick pre laminated particle board (ISI Marked), exterior grade, pre laminated both side with decorative choice lamination and other side balancing white lamination, fixed with beading to aluminium frame work as in panel of shutter / built in locker after taking out old board, complete all as specified and directed .
Hacking out old broken glass ( any thickness) size quality etc from metal frames fixed with pin, beading or oil putty complete all as specified and directed.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square exc 0.5 Sqm in each panes complete all as specified and directed.
3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.
Two coats of synthetic enamel paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide primer including preparation of new surfaces complete all as specified & directed.
Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed by Engineer-in-charge.
Pre-painted galvalume aluminium zinc coating AZ-70 GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
Pre-painted galvalume aluminum zinc AZ-70 coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.
Material and labour rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290.Gde-E-165,complete all as specified and directed.
Dismantling of wall lining and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified & directed by Engineer-in-charge.
Standard GI snap grid of size 605mm x 605mm frame work for false ceiling with main tee 32 x 24 x 1mm thick cross tee 26 x 24x 4mm thick and wall angle 24 x 24x 1mm thick having flange powder coating and covered with PVC thin sheet same to placed in grid by means of ceiling and grid to be tied properly / suitabely by GI strip / GI wire in truss / ridge / purlin complete all as specified and directed.
Perforated particleboard/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or withstaples on snap gridSupply only prelaminated particle board 7mm thick of size 600 x 600mm, interior grade, preliaminated one side with decorative choice lamination and other side balancing white liamination, fixed with staples as in snap grid complete all as specified and directed.
Supply and fixing for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.
PVC sheet fillet 35mm wide, 5mm thick for wall paneling, complete all as specified and directed.
Demolition of Brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified & directed by Engineer-in-charge.
Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.
All as per item No 46 hereinbefore but execpt brick
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed
15mm thick rendering cement plaster in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements complete all as specified and directed
Rendering 15mm thick plaster in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces and finishing the surface even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.
10mm thick rendering plaster in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth without using extra cement, and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.
Three coats of white washing on new plastered or un-plastered surfaces of ceiling including preparation of complete all as specified and directed.
Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of Chalk whiting on plastered surfaces, preparatory to distempering complete, all as specified.
Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, over a coat of primer complete all as specified and directed.
Two coats of white wash on wall surfaces including preparation of old decorated surfaces complete all as specified and directed
Preparation of old surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed
Preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors, and pavings not exceeding 15cm thickness (below or above ground level) all as specified & directed by Engineer-in-charge.
50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-charge.
100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed.
Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed.
Concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block of any description complete all as specified and directed
Dismantling floor hearth or wall tilling including cement mortar bedding, complete as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.
Glazed ceramic coloured tiles of size 350mmx450mmx7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.
Coloured vitrified ceramic tiles dark shade 10mm thick (square / rectangular) polished, area of each tiles exc 0.18 Sqm but n.exc 0.38 sqm, on vertical surfaces as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.
Kota Stone Slab flooring, 16-18mm thick, best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and polishing (Mirror finish) complete all as specified and directed.
All as per serial item No 68 hereinbefore but on skirting / vertical surfaces laid over and including 10mm screed layer in cement mortar 1:3, cutting, rubbing, grinding and polishing complete, all as specified.
Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar complete all as specified and directed.
18mm to 20mm thick granite stone slabs, width and length as ordered, best quality machine cut and granite polished to be fixed on kitchen platform, steps, pillars, floors etc and jointed with grey cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing, over and including screed bed 15mm thick in cement mortar 1:6 and rounding off/bull nosing exposed edges and making holes for gas pipes etc including dismantling of old stone slabs complete all as specified and directed.
Vitreous china wash basin white, flat back of size 550 x 400 mm white including, pillar tap waste fittings, brass chromium plated coupling, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe fixed as in repair complete all as specified & directed by Engineer-in-charge.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.
Vitreous china, wash down water closet pan, Pedestal pattern coloured with ‘P’ or ‘S’ trap in and, including seat cover, complete set, fixed in repair complete all as specified and directed.
Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed as in repair, complete all as specified & directed.
Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) fixed as in repair, complete all as specified & directed.
Stop valve, fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed.
Stop valve, fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed in repair complete all as specified and directed.
Bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed.
Angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type , screwed both ends for iron pipe or for unions, suitable for 15mm bore pipe, fixed as in repairs, complete all as specified and directed
Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Chromium plated, fancy type shower rose with swivel joints 125mm dia with shower arm brass CP 195mm long with bend of 45 degree and fixing to steel pipe 15mm bore and fixed, as in repair complete all as specified and directed.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed in repair complete all as specified & directed.
Demolition and breaking up drain pipes (Salt glazed stone ware / AC/RCC drain pipe etc) complete all as specified and directed.
PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
PVC (SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
Supply and fixing PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repair complete all as specified and directed
100mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed
75mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed
100mm dia bore PVC (SWR) 'P’ trap complete all as specified and directed
100mm dia bore PVC (SWR) 'S’ trap complete all as specified and directed
110mm dia PVC (SWR) vent cowl complete all as specified and directed
PVC (SWR) floor trap, plain with grating including jointing with solvent cement 100mm bore, including jointing to waste pipe set in cement concrete type , fixed as in repair complete all as specified.
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
PVC connections 15 mm size with PTMT nuts of length 450 mm fixed in repair, complete all as specified and directed.
Toilet paper holder, cast copper alloy, chromium plated fixed in position, fixed as in repair , complete all as specified and directed.
Taking up or down 15mm bore steel tubing with all standard fittings or connections, from wall/ceiling/floor etc., including removal from site to store/for re-use or for credit, complete all as specified and directed.
All as per item No. 98 hereinbefore but for 20mm bore
Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed.
Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) or PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, and removal of rubbish outside MoD land, complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.
Removal excavated soil to a distance exc 250 but n.exc 500m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.
Material and labour plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, hold fast, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge. - (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.
Material and labour for 35mm thick precast cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) including dismantling of existing old jallies and removal of debris complete all as specified & directed by Engineer-in-charge.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 15mm bore PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
MS R G ENTERPRISES
m/s AR Construction co
M/s Super Trading Corporation
aggarwal traders
KUNDRA CONSTRUCTIONS
MS GURENDER SINGH
RAJESH KUMAR
BANSAL BUILDERS
Standard Const. Co.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .