works against O and M Head at various places (33/11 KV Sub-Station, Chinhat (Shivpuri), Omega and UPSIDC) under the jurisdiction of Executive Engineer, EUDD, Chinhat, LESA, Lucknow

Amount

Laying and Jointing PVC Pipe. Heading

Repairing of T/f Plinth, its plastering, painting as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost) RMT

Repairing of wiremesh fencing,retaining wall, fabrication & erection of Wiremesh fencing upto the height of 2.0 Maround Transformer with retaining wall & 1 no.gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm. Wiremesh of size 10 SWG rectangle type,its painting as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost)

Repairing , Weilding of S.T Pole. With MS Angle iron of size 50x50x6 mm jointed with nuts and bolts.

Replacement of damaged PCC Pole 8.5 mtr. Erection, Grouting (0.268 Cu M per pole), plinthing (300 mm above ground level) of Single PCC Pole 8.5 M long. 1/6 of total length of poles will remain under the fround and planted on Stone pad of size 300x300x75 mm long with grouting.

Replacement of damaged S.T Pole 9.0 mtr. Long Erection, Grouting (0.268 Cu M per pole), plinthing (300 mm above ground level ) of Single S.T Pole 11 M long 1/6 of total length of poles will remain under the ground.

Replacement of damaged S.T Pole 11 mtr. Long Erection, Grouting (0.268 Cu M per pole), plinthing (300 mm above ground level ) of Single S.T Pole 11 M long 1/6 of total length of poles will remain under the ground.

Construction of damaged L.T line 3 Phase 04 wire on PCC Pole.

Regrouting of ST/PCC Pole.

Replacement of damaged H.T line on H.T Pole

Replacement of damage 33 KV H.T cable with Relaying with New H.T cable 3x300 sq. mm.

Guarding of 11 KV line with G.I Wire of size 8 SWG as per RESSPO norms.

Fixing of guarding angle of size 40x40x5x1500 mm (All material shall be supply by the contractor)

Erection of stay set of 16x1800 mm rod duly painted with red oxide, anchor plate,thumble turn buckle and stay insulator etc. digging of pit of size 0.4x0.6x1.6m for grouting by 1:3:6 cement concrete, with stay of size 7/8 swg,nuzzling & grouting.

Boring type earthing of 11/0.4 KV various Substation by boring and lowering of 30 Mtr deep or upto water level 1.5" dia B Class Jindal make GI Pipe its connection in between transformer and boring with G.I Strip of size 50x6 mm (All the material will be arranged by the contractor )

Earthing of poles with MS Earting of size 20x2500 mm including its connection

Resagging , restrengthening of Ht line 11 kv 3 Phase 3 wire

Repaire of masonry type Distribution Pillar boxes with first class brick ballast cement, coarse sand,local sand, brick ballast and MS round bar of mm dia including supply and mounting of 02 nos. Straigth MS Angle 50x50x6x750 mm 2 nos. Henely type tailless fuse unit one no. for incoming and other for outgoing, Copper bus bar 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet (All the material will be arranged by the contractor)

Construction of masonry type Distribution Pillar boxes with first class brick ballast cement, coarse sand, local sand, brick ballast and MS round bar of 10 mm dia including supply and mounting of 02 nos. Straight MS Angle 50x50x6x750 mm 2 nos. Henely type tailless fuse unit one no. for incoming and other for outgoing, Copper bus bar 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet (All the material will be arranged by the contractor)

Cutting and removel of fallen (unrooted) trees on electricals instalation due to storm

m/s lutavan enterprises