Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹42.8 L+₹7.8 L (22.3%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹43.5 L+₹8.4 L (24.1%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹47.2 L+₹12.1 L (34.6%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹47.4 L+₹12.4 L (35.3%)Rejected-Finance 14 ILTIFATGANJ AMBEDKAR NAGAR UTTAR PRADESH 224145 UDYAM UP 04 0036158 | AMBEDKAR NAGAR | UTTAR PRADESH | 224145 | L5 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
5 May 2021, 6:00 pmClosed
VIJAY NEHRA
GE SATWARI
PERIODICAL SERVICES INCLUDING EXTERNAL PETTY REPAIRS FOR JCO/ OR MD ACCN AND UNIT AREA IN ZONE-I AND II (UPTO 4TH STOREY) UNDER GE SATWARI
2021_MES_435206_1
GEJM-14/2021-22
Open Tender
Civil Works
Item Rate
270 days
GE SATWARI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE SATWARI
₹80,000
Yes
21 May 2021
8 Apr 2021
7 May 2021
8 Apr 2021
5 May 2021
28 Apr 2021
Amount
Note :- (1). Work will be carried out upto 4th storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account. (2). The rates quoted by the contractor are inclusive of grubbing of plants growing off the walls, fins, shafts, chajjas etc of the buildings and making good the surface before prearation for periodicals which shall be handed over to the user for execution of work services. (3). The contractor shall get approved by engineer in charge srapping and preparation of surfaces (both internal and external) of the buildings as a stage before carring out periodical services.
M & L Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of walls, pillars, cornices etc (upto four storey bldgs) by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, rubbing with sand paper and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.
M & L Ppreparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying one coat of white wash on ceiling, complete all as specified and directed.
M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with dustfree sand paper mechanised scrapper as per paint manufacturer specifications and applying one coat of premium distemper on old decorated wall surface using high efficiency hydraulic pump with minimum 270 cc motor and oil alert and silver plus airless gun spray as per manufacturer instructions, necessary filling of wall care putty on uneven surface as and where required all as directed by engineer in charge.
M & L for preparation of old decorated plastered /concrete surfaces of walls, including complete removal of existing treatment & rubbing with dustfree sand paper mechanised scrapper and applying two coats of oil emulsion distemper using high efficiency hydraulic pump with minimum 270 cc motor and oil alert and silver plus airless gun spray as per manufacturer instructions over coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.
M & L Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornice etc (upto 4th storey with necessary scaffolding complete all as specified and directed.
M & L Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coats of cement base paint on walls, pillars, cornice etc (upto 4th storey with necessary scaffolding complete all as specified and directed.
M & L Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying one coat of weather proof exterior emulsion making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required etc (up to 4th storey with necessary scaffolding) complete all as specified and directed.
M & L Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying one coat of synthetic enamel paint on wood surfaces of any description ( up to 4th storey with necessary scaffolding) complete all as specified and directed
M & L Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying two coat of synthetic enamel paint on steel surfaces of any description ( up to 4th storey with necessary scaffolding) complete all as specified and directed
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified.
M&L Rendering cement plaster 15 mm thick ( in patches n. exc 3.00 Sqm) on fair faces of concrete/brick surfaces of wall in cement mortar 1:4 finished even and smooth w/o using extra cement ( up to 4th storey with necessary scaffolding) complete all as specified and directed.
M&L Rendering cement plaster (in patches n. exc 3.00 Sqm), 15 mm thick on fair faces of brick/concrete surfaces of wall in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified.
M&L Rendering cement plaster ( in patches n. exc 3.00 Sqm) 10 mm thick on fair faces of ceiling surfaces in cement mortar 1:3 finished even and smooth w/o using extra cement complete all as specified and directed.
M & L Preparation of new plastered or unplastered surfaces of ceilings to achieve smooth and even surface and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.
M & L Preparation of new plastered or unplastered surfaces of walls to achieve smooth and even surface and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of putty of 1 to 2 mm thick and one coat of primer using high efficiency hydraulic pump with minimum 270 cc motor and oil alert and silver plus airless gun spray as per manufacturer instructionscomplete all as specified.
Writing letters or figures (Block, Roman. Italic or Indian) n.exc 30cm high including obliterating old writing of any description n.exc 0.2 Sqm with paint to match existing work complete all as specified Such as NP-02,P-101,T-104
Preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of cement based paint over and including one coat of primer (up to 4th storey with necessary/scaffolding) complete all as specified and asdirected by Engr-in-charge.
M&L for chipping of spalled and loose concrete of soffits of slabs,chajjas, stair case, facias, parapets, columns, beams and like as directed, roughening and cleaning concrete surafce with steel wire brushes, removing of rust from existing steel surface with rust remover of SIKA rustoff 100 applied in two coats @ 0.15 Kg/Sqm per coat of steel surafce and cleaning all rust with wire brushes cleaning with water and allowed to dry including S&F welded fabric GI wire mesh or wire size not less than 75mmx75mm and 3.0mm dia as reinforcement to concrete after placing the additional reinforcement all concrete surface shall thoroughly scrubbed with brushes, washed with water and allowed to dry this surface apply chemical polycrete admixture at the rate not less than of 2% by weight of cement and providing minimum 30mm thick (average thickness) gunniting mix (using 1 part of Ordinary Portland Cement and 2 parts of sand mixed with adhesive/admixture at the rate as directed) with a pressure 2.00 to 2.5 kg/sqcm by guniting machine and making the surface even including 5mm thick plastering in CM 1:3 on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement including necessary form work to be carried out complete all as specified and directed.
M/S Shesh Paul Gupta
ASHFAQ AHMED MANHAS
M/S Gouri Constructions
M/S R S CONSTRUCTION CO
M/S ANIL MAHAJAN
Shri Karshni Builders
M/S Sukhmani Construction Co.
M/S ROMESH KUMAR SHAN
M/S MOHAN LAL GUPTA
ESS BURT AND COMPANY
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .