SPECIAL REPAIR TO BUILDING NO P406 SINGLE LIVING IN ACCN FOR SNCOs AT AIR FORCE STATION JAISALMER

Amount

Dismantling existing water proofing treatment,concrete works of any location up to existing RCC slab by chiesling,drilling,scraping etc.complete all as specified and directed.

Taking down chowkhats or frame/steel windows not exc 1.50 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 but not exc. 4 sqm in each complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or any thickness, pointed in any mortor or any height in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position/height not otherwise specifically provided for and including removing debris/rubbish from the premises upto 500m from site complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, ceiling floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work in any position/height and including removing debris/rubbish from the premises upto 500m from site complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 25mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed.

Dismantling existing water tanks of capacity upto including 1000 ltrs lowering from its position and removal from site, etc. complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone or PCC block masonry walls/ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc and including removing debris/rubbish from the premises upto 500m from site complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for balcony railing, etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in any position/height not exceeding 15cm thickness (below or above ground level) and including removing debris/rubbish from the premises upto 500m outside the MoD land complete all as specified and directed.

Dismanling of Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and as directed.

Demolition and breaking up drain pipe (SGSW, AC, RCC or PVC) of size upto 150mm bore including demolition of PCC bed concrete as in benching and hauching, etc., and including removing debris/rubbish from the premises upto 500m outside the MoD land complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading levelling watering &well ramming in layers n.exc 25cm in hard/dence soil complete all as specified and directed.

Removing of excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

M&L for plain cemen t concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in Roof padding on roof for correction of slope, levelling coarse, roof kerbs of mud stops or similar works, etc complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in bands, bed blocks, fixing hold fasts, filling of door frames, etc., including required necessary formwork complete all as specified and directed.

M&L for reinforced cement concrete (Nominal Mix) (1:2:4) type B1 using 20mm graded aggregate as in chajjas, balcony, roof pojection, slab supported on wall and similar works, etc. complete all as specified and directed.

M&L for reinforced cement concrete (Nominal Mix) (1:2:4) type B-0 using 12.5mm graded aggregate as in chajjas, balcony and similar works, etc. complete all as specified and directed.

M&L for precast cement concrete solid block (1:3:6 ) type C-1 (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:6, etc complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 (40 mm graded stone aggregate) 75mm thick in plinth protection and provided joints 10mm wide and full depth at 3m distance and every change of direction filled with sand and bituminious mix 1:3 complete all as specified and directed.

M&L for Plain cement concrete (1:4:8), type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring/hard standing finished even and fair surfaces complete all as specified and directed.

M&L for 40 mm thick cement concrete (1:2:4) type B-1, using 20mm graded stone aggregate as in floors and drain finishing the surface even and smooth with using extra cement complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping , benching, etc including required necessary formwork complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in bed of drain pipe inch packing under and haunching against the sides of pipe after they are laid and tested for 150mm dia of pipe complete all as specified and directed.

M&L for 10mm thick cement screed in cement mortar (1:3), including finishing even and smooth with out using extra cement to receive roof treatment, mixed with liquid water proofing compound mixed as per manufacture instruction by weight of cement over cleaned roof surface, as in grading to RCC roof surface,complete all as specified and directed. Note - Water proofing compound shall be measured and paid separately.

Supply only Liquid water proofing compound, make as approved by GE complete all as specified and directed.

M&L for 15mm thick rendering cement plaster in cement mortar (1:6) on stone masonry surfaces or other than of fair faces of brick or concrete surfaces, finished even and fair complete all as specified and directed.

M&L for 15mm thick rendering cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) surface finished even and smooth without using extra cement with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately as supply only.

M&L for 10mm thick rendering cement plaster on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses in walls, etc. complete all as specified and directed.

M&L for preparing new plaster surfaces and applying 1mm thick readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces of wall complete all as specified and directed.

M&L for complete removal of old existing treatment, filling up undulation and applying 1 mm thick readymixed wall putty on entire surfaces of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces of wall complete all as specified and directed.

M&L for preparing new plaster surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on old treated ceiling surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by GE complete all as specified and directed.

M&L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coats of cement base paint (tinted) on surfaces of walls any colour as approved by GE complete all as specified and directed.

M&L for preparation of new wood or wooden or wood based surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a one coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surface or wood based materials of any description, not otherwise described, over 10cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for cutting out cracks to V-section in existing roofs or terracing ,cleaning out ,wetting,grouting with cement and sand slurry (1:3) complete all as specified and directed.

M&L for water proofing roof treatment, consists of a five layered Atactic polypropylene modified polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including Bituminious primer @ 0.3 ltr per Sqm confirming to IS 3384-1986 on roof surfaces piror laying APP and a coat of bituminous aluminium primer @ 100 gm/Sqm on top, including sealing all joints by thermo fusion complete all as per manufacturer's instructions and as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slabs 20-25mm thick as in skirting/dado over and including 10mm thick cement mortar 1:4 rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors, etc. over and including 15mm thick screed bedding in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L for (300mm x450mm) x 6 to 7mm thick coloured glazed ceramic tiles as in skirting/dado, etc. over and including 15mm thick bedding layer in cement mortar 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including cement screed bed 15mm thick in cement mortar 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete necessary cutting, notching etc for WHB complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge such as in steps,cooking platform, window cill and other similer situations complete all as specified and directed.

S&F 10mm dia and over Mild steel TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as binding with and including mild steel wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F 6 mm to 8 mm dia Mild steel TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M&L for 8mm dia rebar using HY-200 chemical from HILITI or equivalent including drilling hole of required size in RCC beam/lintel complete all as specified and as directed.

M&L for removing of rust from existing steel surfaces with rust removrs of SIKA Rustoff 10 applied two coats @ 0.15Ltr/Sqm per coat and cleanng all rust with steel wire brush and washed with wter/chemical complete all as specified and directed. (Make- SIKA/BASF/FOSROC or any other make as approved by GE)

M&L for application of Anti corressive coating with SIKA Rustoff friazinc on the exposed reinforcement proper mix applied @ 0.25 litre per Sqm of exposed steel surface as per manufacture's instructions complete all as specified and directed. (Make- SIKA/BASF/FOSROC or any other make as approved by GE)

S&F galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed.

M&L for applying one coat of epoxy resin on old concrete surfaces @ 0.30Kg/Sqm including preparation of surfaces as per manufacturer's instructions and applying 25mm thick (average thickness) of cement, Sand & Aggregate (1:1.5:3) in ratio aggregate not less than 6mm size mixed with chloride free concrete plasticiser as per manufacturer's instructions with guniting applying manual and finished the surface even and smooth complete all as specified and directed.(Manual applied) Make : SIKA/BASF/FOSROC/CIPY or any other make as approved by GE.

S&F form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking plateform and similar work not exc. 200 mm thick, fair finished flat complete all as specified and directed.

S&F form work form work to edge of concrete slabs, breaks in floors, etc. exc 5cm but not exc. 20cm wide, rough finished complete all as specified and directed.

S&F form work to Chajjas, chullah hoods, water troughs and similar items including edges and formwork including necessary struts, scaffolding etc., rough finished flat complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed including one shop coat of zinc chromate primer complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, without glazing bars, dovetailed including one shop coat of zinc chromate primer complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame/shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and complete all as specified and as directed.

S&F expanded metal mesh Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and complete all as specified and as directed.

S&F 3.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane and fixed to steel window complete all as specified and as directed.

S&F 5.0mm thick Figured glass and fixed to aluminium Ventilation in square exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Stainless steel (Grade SS-304) wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed.

S&F 35mm thick (two panel)(double leaf) factory made second class hard wood, plain, framed , paneled shutters with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated etc complete all as specified and as directed.

S&F 35mm thick (double leaf) factory made second class Hard wood glazed/skeleton shutters, open rebated prepared to receive glass, gauze etc devided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc. complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm thick rigid PVC foam sheet reinforced with MS square tube complete all as specified and as directed.

S&F 30mm thick (style) factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement and fixing in the frame at side complete all as specified and as directed.

S&F Cupboards/wardrobes, Factory made framed shall be of 1.25mm thick pressed steel PBI sheet of size 90x70mm shutter shall be made of 1mm thick pressed steel with 6 Nos of 100mm long hinges 3.15mm thick steel hinges standard pattern rim lock with complete locking arangement including 12mm vertical rod shall be provided (brass mortice lock vertical type size 65mm , 2 levers, ISI marked with escutcheon plate abd two key and with including two coats of spray painting with synthetic enamel paint of approved over a coat of red oxide primer incl fixing with minimium 6 Nos 12mm dia mild steel bolts 150mm long grouted in brick/stone /concrete wall including making good the disturbed surfaces as original with cement mortar (1:4) or PCC (1:2:4) type B-0 complete all as specified and as directed. Note The measurenment shall be taken in front elevation and not girthwise

S&F 100mm long Butt hinges, extruded stainless steel hinge pin anodisedand fixed type B-21 complete all as specified and as directed.

S&F 200mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F aluminum anodized handle cast type 150mm size complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 300mm MS long ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F MS hold fasts and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F in reapir curtain rod /rail with drapery rod stainless steel fancy type 25 mm dia including bracket, etc. complete all as specified and directed.

Relaying/refixing of old steel tubing 20mm bore including connections in new or old position including cleaning, necessary cutting, threading with necessary fittings like tees, elbows, sockets, reducers, bends etc compete all as specified and directed.

Relaying/refixing of old steel tubing 25mm bore including connections in new or old position including cleaning, necessary cutting, threading with necessary fittings like tees, elbows, sockets, reducers, bends etc compete all as specified and directed.

S&F 15mm bore galvanised steel tubing (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls(concealed) etc complete all as specified and directed.

S&F 20mm bore galvanised steel tubing (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls(concealed) etc complete all as specified and directed.

S&F 25mm bore galvanised steel tubing (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls(concealed) etc complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick/stone wall complete all as specified and directed.

S&F in repair 20 mm dia Gun Metal Globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed.

S&F in repair 25mm dia Gun Metal Globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed.

S&F of 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), Tripple layered, ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below complete all as specified and directed (a) S&F drainage spout pipe GI 40 mm dia bore light grade up to outside of outer wall (appx 450mm to 600mm long) (b) M&L for 50mm thick PCC (1:1.5:3) type B-0 using 12.5mm graded stone aggregate laid in slope towards drainage out spout pipe mixed with Water proofing chemical as per manufacturer instructions of MAKE : FOSROC/SIKA/PIDILITE/STP.Khurra 150mmx150mm (min) at appropriate location for free flow of leaked water if any drainage spouts shall be provided integrallywhile laying PCC. fixing of spout shall be done with same PCC as in this item. (C)M&L for 18 mm thick cement plaster in cement mortar (1:3) on vertical faces mixed with water proofing chemical of MAKE:301 Pidicrete URP of Dr Fixit or other techno commercially equivalent make of SIKA /PIDILITE/ FOSROC/STP as approved by GE. (d) M&L for lime concrete with 40mm graded stone aggreagte in lime mortar (1:2) as filling in balance portion of sunken floor. (Note:- Depth of sunken shall be 30 to 40 cm and for measurement purpose plan area of sunken floor shall be measured.)

S&F in repair water closet vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest front/back inlet (excluding flushing cistern and flush pipe) including provision of cement concrete bedding in PCC (1:5:10) type E2 and making good to disturb surface complete all as specified and as directed.

S&F repairs Vitreous china wash down water closet pan (pedestal pattern) with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, wliile, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but fixing on counter top slab including waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe complete all as specified and as directed.

S&F in repairs vitreous china full stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flishing cistern with brackets, flush pipe, grating and union for discharge pipe(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F in repair PVC 10 litres capacity valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.

S&F in repair 15mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair 15mm bore Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed (JAQUAR,Model No CON- 169KNB)or equivalent complete all as specified and as directed.

S&F in repair fancy type chromium plated 15 mm bore angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs fancy type chromium plated with long shank and cup (Concealed type) 15mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair PVC connections suitable for 15mm dia pipe with PTMT nut of length 600mm complete all as specified and as directed.

S&F in repair hand shower (health faucet) (ABs body) with 8mm dia one meter long flexible tube in chrome finish incl wall hook & wall work incl fixing compl (Make : JAQUAR, Model No ALD-CHR-585)or equivalent complete all as specified and as directed.

S&F in repairs Chromium plated shower rose size 120 mm dia and round shape including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs75mm dia Chromium plated shower rose with CP arms with swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with fixing chromium plated bracket, guard and railing 55/56cm long complete all as specified and as directed.

S&F in repair 20mm dia brass chromium plated tubular towel rail D-Type, 60cm long between flanges complete all as specified and as directed.

M&L for cutting holes into or through brick/stone walls built in cement mortar (nexc 400mm thick), superficial area exc 400 Sqcm nexc 0.10 Sqm and making good in cement mortar 1:3 or PCC 1:2:4: type B-1 as required complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap of 75mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm dia pipes single socketed in any length with rubber ring joints laid in trenches/floor or fixed to walls including digging and making good as existing complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) bend any radius with access door complete all as specified and as directed.

S&F in repair 110 mm PVC (SWR) Junction single (Single T) equal or unequal with access door complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to walls including digging and making good as existing complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) Junction single (Single T) equal or unequal with access door complete all as specified and as directed.

S&F in repair 75mm dia PVC (SWR) bend any radius complete all as specified and as directed.

S&F in repair 75mm dia PVC (SWR) bend any radius with access door complete all as specified and as directed.

S&F in repair Stack clamps out of 50mm x 5mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 110mm pipe complete all as specified and as directed.

S&F in repair Stack clamps out of 50mm x 5mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 75 mm pipe complete all as specified and as directed.

M&L for salt glazed stone ware gully trap size 150x150mm, square,type 'P' including setting and jointing to drains with cement mortar (1:1) and CI grating including demolition of existing traps complete all as specified and directed.

M&L for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed to steel windows/wooden doors fixed with GI wire staples complete all as specified and directed.

M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed in cement mortar 1:3 complete all as specified and directed.

Cutting the roots of trees from the brick/stone wall made in cement morter exc half and not exc one brick thick wall and making good the disturbed surfaces to arrest further growth to the roots with the cement sand mortar (1:3) or PCC (1:2:4) type B-1 complete all as specified and directed.

Supply, lay, fix, joint and test 150mm SGSW drain pipe laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed.

S&F of providing SFRC pre cast manhole covers with rectangular frame of size 44"x 26" MD-10 fixed at site up to satisfaction of Engr-in-charge abd incl dismantling of old manholes cover slab complete all as specified and directed.

Taking down carefully aluminium point wiring on wooden battens/through conduit (light fan, socket or power) complete with fittings such as switches, wooden batten, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed.

Taking down carefully unserviceable MCCB's/MCB's of any type any capacity complete all as specified and as directed.

Taking down carefully unserviceable distribution board any type any capacity complete all as specified and as directed.

Taking down carefully unserviceable submain wiring any type any rating complete all as specified and as directed.

M&L for concealed point wiring for controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly including sunken box of size 1.6mm thick and 60 mm depth presse ssteel box factory made for mounting of switch, socket and fan regulator with modular frame covers, complete all as specified and directed.

One light point controlled by one, one way switch

One fan point controlled by one, one way switch

One socket outlet 3 Pin, 6 Amp on independent board

One socket outlet 3 Pin, 6 Amp on same board.

M&L for concealed point wiring for controlled by one switch with PVC unsheathed single core FRLSH multistranded copper conductor cable of size 4 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in cement mortar (1:3) and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling including one run of PVC insulated FRLSH copper conductor cable of 4 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board complete all as specified and directed.

S&F switch piano flush type single pole one way 5 Amp (ISI Marked) complete all as specified and directed.

S&F switch piano flush type single pole one way 15 Amp (ISI Marked) complete all as specified and directed.

S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) complete all as specified and directed.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) complete all as specified and directed.

S&F Electronic fan regulator 230 volts, step type, socket type, hum free 120 watt ISI Marked,including taking down unserviceable complete all as specified and directed.

S&F ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) complete all as specified and directed.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 6.00 Sq mm 1100 volts grade including and 6.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in rigid PVC conduit 25mm bore complete all as specified and directed. Note : Two run of 6.0 Sqmm cable and one run of 6.0 Sqmm cable as earth continuity conductor and 25mm rigid PVC conduit shall be measured and paid as one unit.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 4.00 Sq mm 1100 volts grade including and 4.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in rigid PVC conduit 25mm bore complete all as specified and directed. Note : Two run of 4.0 Sqmm cable and one run of 5.0 Sqmm cable as earth continuity conductor and 25mm rigid PVC conduit shall be measured and paid as one unit.

S&F factory made sheet metal enclosure for VTPN DBs, 4Ways, double door, class IP-43 I with built-in-bus bar complete suitable for 415Volts, AC, 50Hz supply, suitable for incoming MCCB and outgoing MCBs and fixed in recess in wall complete all as specified and directed.

S&F prewired distribution board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 12 way (2 + 10 way) single pole and neutral, etc. complete all as specified and directed.

S&F MCB, 6 to 32 Amp, SP, 240 Volt, 10 KA breaking capacity complete all as specified and directed.

S&F MCB, 40 Amp, SPN, 240 Volt, 10 KA breaking capacity complete all as specified and directed.

S&F MCCB 100 Amps TP, 415 Volt 16 KA breaking capacity, adjustable thermal & fixed magnetic setting Ics = 100% = 01 No complete all as specified and directed.

S&F MCB TPN, 40 to 100Amp, 10 KA breaking capacity complete all as specified and directed.

S&F surface and wall mounted LED tube light fittings 20W capacity, four feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver including taking down of old light fittings complete all as specified and directed.

S&F surface and wall mounted LED tube light fittings 10W capacity, two feet Basic all purpose surface and wall mounted LED batten with extruded aluminium housing & integrated electronic driver including taking down od old light fittings complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep heavy duty sweep with, blades, and frame and metal louvers, nuts and bolts, etc. Including making holes in to the wall as per fan size and making good the disturbed surfaces with cement mortar complete as specified and directed.

S&F LED Street Light of Capacity 30W with inbuilt Driver having Pressure die cast Aluminium housing, IP-66 Having Efficiency of ≥ 100 Lumens/Watt, Operating voltage – 120 – 270 Volts, P.F ≥ 0.95, T.H.D < 10 % , Suitable for 30 to 40 mm O.D Mounting Pipe and Suitable for mounting on Wall / Pole With Necessary Mounting arrangements ) including connecting up with three core twisted flexible copper conductor cable with suitable size, Mounting Pipe/Bracket, Nut,Bolts and Accessories including disconnected & taking down old unserviceable light complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.

(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Quoted rate of Item includes the cost of 7.50m GI pipe for protection of earth wire/strip Any variation in length shall be adjusted through deviation order. (iii) Quoted rate of Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

M&L for sand cushioning with dry Tibba sand for under ground cable provided with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. Note:- 18cm punned thickness shall be consideredfor measurement and payment.

M&L for 40 to 50mm thick stone patti rough dressed jodhpur stone slab cover 25 to 30cm wide and not less then 80cm in length laid dry in trenches for protection of cable abutting each other with gap between adjecent slab not excedding 10mm over sand cushoing complete all as specified and directed.

Supply,lay, joint and test 1100 volts grade heavy duty electric cable LT XLPE insulated,screened, armoured electric power cable with stranded aluminium conductor of cable size 3.5 core 70sqmm complete all as specified and directed.

Paliwal Construction Company

S.K. INFRASTRUCTURE

HINGLAZ ENTERPRISES

M/s RKG CONSTRUCTIONS

Leelashah Enterprises